RESUMO
Silver based nanoparticles (Ag-b-NPs) in the environment are of current concern as they may pose risks to human and environmental health, even at low concentration levels. It is widely known that Ag-b-NPs, once released from products containing these particles for antimicrobial reasons, can pass through wastewater treatment plants to some extent. These particles are transported via running waterways and eventually reach the sea. However, the fate of environmentally relevant ng L-1 traces of Ag-b-NPs in seawater has not yet been sufficiently studied. Analytical techniques capable of determining these ultratraces of Ag-b-NPs in seawater are scarce and struggle furthermore with the high chloride content in highly saline matrices, such as seawater. In this study, we extracted Ag-b-NPs from matrices with varying salinity via cloud point extraction (CPE) and determined concentration and size of Ag-b-NPs in extracts with single particle inductively coupled plasma mass spectrometry (sp-ICP-MS). Applying this extraction and measurement technique, we were able to investigate the fate of Ag-b-NPs with different coatings (citrate and the predominant coatings in nature, silver sulfide and silver chloride) in matrices with increasing salinity and real seawater. All types of Ag-b-NPs were dissolved in all matrices almost independently of the chemical composition of the nanoparticles (NPs), whereas dissolution rates increased with increasing salinity due to the formation of soluble Ag(I) species and - in the presence of chloride - AgClx1-x (x > 1) complexes. After an incubation time of not more than 72 h, Ag-b-NPs were dissolved almost completely. During the dissolution process, NP shrinkage could be clearly observed by sp-ICP-MS. Supplementary electron microscopy measurements revealed that the sulfur content in silver sulfide nanoparticles (Ag2S-NPs) increased during the dissolution process. Finally, we were able to investigate the dissolution process of real Ag-b-NPs in wastewater after increasing the salinity to seawater levels.
Assuntos
Nanopartículas Metálicas , Prata , Humanos , Água do Mar , Sulfetos , Águas ResiduáriasRESUMO
Harvest and dewatering poses a significant economical burden for industrial algae biomass production. To mitigate these effects, energy efficient techniques for these process steps have to be developed. Flocculation of the microalgae Scenedesmus obtusiusculus in salt based medium was induced by pH-shift and alternatively by addition of two biological flocculants, chitosan, and the commercial tannin CFL-PT. This is the first time that CFL-PT is used as an algae flocculant particularly focusing on harvesting of halophilic strains. The method was characterized and subsequently optimized. In comparison to biological flocculants, induction by pH shift is far cheaper, but due to buffering effects of the brackish cultivation medium infeasible amounts of base are required to raise the pH-value. tannin appears to be superior compared to chitosan not only in the absence of algae organic matter (AOM), but tannin-based harvest is also more robust regarding culture pH in presence of AOM. A higher flocculant-demand for modified tannin compared to chitosan is offset by the lower price. Given the employed strain and cultivation conditions, cultivation time had no pronounced effect on flocculation efficiencies (FE) while algae zeta-potential and bacterial communities also remained stable.