The surface charge induced high activity of oxygen reduction reaction on the PdTe2 bilayer.

Developing transition metal dichalcogenides as electrocatalysts has attracted great interest due to their tunable electronic properties and good thermal stabilities. Herein, we propose a PdTe2 bilayer as a promising electrocatalyst candidate towards the oxygen reduction reaction (ORR), based on extensive investigation of the electronic properties of PdTe2 thin films as well as atomic-level reaction kinetics at explicit electrode potentials. We verify that under electrochemical reducing conditions, the electron emerging on the electrode surface is directly transferred to O2 adsorbed on the PdTe2 bilayer, which greatly reduces the dissociation barrier of O2, and thereby facilitates the ORR to proceed via a dissociative pathway. Moreover, the barriers of the electrochemical steps in this pathway are all found to be less than 0.1 eV at the ORR limiting potential, demonstrating fast ORR kinetics at ambient conditions. This unique mechanism offers excellent energy efficiency and four-electron selectivity for the PdTe2 bilayer, and it is identified as a promising candidate for fuel cell applications.

A carbon allotrope with twisted Dirac cones induced by grain boundaries composed of pentagons and octagons.

The grain boundaries (GBs) composed of pentagons and octagons (558 GBs) have been demonstrated to induce attractive transport properties such as Van Hove singularity (VHS) and quasi-one-dimensional metallic wires. Here, we propose a monolayer carbon allotrope which is formed from the introduction of periodic 558 GBs to decorate intact graphene, termed as PHO-graphene. The calculated electronic properties indicate that PHO-graphene not only inherits the previously superior characteristics such as Van Hove singularity and quasi-one-dimensional metallic wires, but also possesses two twisted Dirac cones near the Fermi level. Further calculation finds that the Berry phase is quantized to ± π at the two Dirac points, which is consistent with the distribution of the corresponding Berry curvature. The parity argument uncovers that PHO-graphene hosts a nontrivial band topology and the edge states connecting the two Dirac points are clearly visible. Our findings not only provide a reliable avenue to realize the abundant and extraordinary properties of carbon allotropes, but also offer an attractive approach for designing all carbon-based devices.

Tuning the Surface Composition of Ni/meso-CeO2 with Iridium as an Efficient Catalyst for Hydrogen Generation from Hydrous Hydrazine.

Selective decomposition of hydrous hydrazine (N2 H4 ⋅H2 O) over metal catalysts provides a promising means for onboard or portable hydrogen source applications. Studies on N2 H4 ⋅H2 O decomposition catalysts mainly focus on the effects of bulk composition and structure on their performances, instead of the surface-composition-dependent properties. Herein, the synthesis of an Ir-modified Ni/meso-CeO2 catalyst is reported by using a combination of colloidal solution combustion synthesis and galvanic replacement methods. A combination of structural characterization, control experiments, and DFT calculations reveals that the Ni-Ir alloy resulting from calcination treatment exerts a profound effect on the catalytic properties. The resulting Ni@Ni-Ir/meso-CeO2 catalyst shows excellent catalytic performance towards hydrogen generation from N2 H4 ⋅H2 O, which compares favorably with the Ni-Ir bimetallic catalysts reported to date.

Electronic structure, optical and photocatalytic performance of SiC-MX2 (M = Mo, W and X = S, Se) van der Waals heterostructures.

The stacking of monolayers in the form of van der Waals heterostructures is a useful strategy for band gap engineering and the control of dynamics of excitons for potential nano-electronic devices. We performed first-principles calculations to investigate the structural, electronic, optical and photocatalytic properties of the SiC-MX2 (M = Mo, W and X = S, Se) van der Waals heterostructures. The stability of most favorable stacking is confirmed by calculating the binding energy and phonon spectrum. SiC-MoS2 is found to be a direct band gap type-II semiconducting heterostructure. Moderate in-plane tensile strain is used to achieve a direct band gap with type-II alignment in the SiC-WS2, SiC-MoSe2 and SiC-WSe2 heterostructures. A difference in the ionization potential of the corresponding monolayers and interlayer charge transfer further confirmed the type-II band alignment in these heterostructures. Furthermore, the optical behaviour is investigated by calculation of the absorption spectra in terms of ε2(ω) of the heterostructures and the corresponding monolayers. The photocatalytic response shows that the SiC-Mo(W)S2 heterostructures can oxidize H2O to O2. An enhanced photocatalytic performance with respect to the parent monolayers makes the SiC-Mo(W)Se2 heterostructures promising candidates for water splitting.

Strain engineering of electronic structures and photocatalytic responses of MXenes functionalized by oxygen.

The structural, electronic, and photocatalytic properties of two-dimensional Ti2CO2, Zr2CO2, and Hf2CO2 MXenes were investigated by first-principles (PBE and hybrid) calculations. Transition from an indirect to a direct band gap was achieved for the biaxial tensile strain of 3% for Ti2CO2, 8% for Zr2CO2, and 13% for Hf2CO2 while the nature of the band gap remained indirect in the case of the compressive strain. The size of the band gap passed through a maximum under tensile strain and decreased monotonically under compressive strain. Analysis of Bader charge distribution showed that the tensile strain decreased the transfer of charge from the Ti, Zr, and Hf atoms to the C atom. Phonon spectra suggested that these systems are stable under a wide range of strains from compression to tension. The photocatalytic properties showed that unstrained and biaxial tensile strained Ti2CO2, Zr2CO2, and Hf2CO2 systems can be used to oxidize H2O into O2.

SiS nanosheets as a promising anode material for Li-ion batteries: a computational study.

Recently, a two-dimensional Pma2-SiS monolayer has been predicted to show promising electronic properties [Nano Lett., 2015, 16, 1110]. However, it is suggested that Pma2-SiS is not suitable as an anode for Li-ion batteries [J. Power Sources, 2016, 331, 391]. By employing density functional theory calculations, we find that an ultrahigh theoretical specific capacity of 893.4 mA h g-1 can be achieved in Pma2-SiS due to the strong bonding between Li and the S atoms released from Si-S bond breakage. Additionally, the low barrier of Li-diffusion (0.08 eV) along the Si-Si bond direction and the moderate average voltage (1.12 V) of the Li intercalation suggest that Pma2-SiS is promising as an anode material for Li-ion battery applications.

Theoretical exploration of the potential applications of Sc-based MXenes.

Herein, we systematically explored the electronic properties of Sc-based MXenes via first-principles calculations, with the aim to extend their applicability. OH-Functionalized carbides and OH/SH-terminated nitrides manifest ultralow work functions, potential in field-effect transistors. Furthermore, we identified three novel semiconductors (Sc2CCl2, Sc2C(SH)2, and Sc2NO2). Specifically, Sc2NO2 is a spin gapless semiconductor, promising for spintronics. Type-II heterojunctions are readily available between Sc-based semiconducting MXenes, facilitating charge separation for optoelectronics and solar energy conversion. Further photocatalytic analysis indicates that Sc2CCl2 is capable of oxidizing H2O into O2.

Potential of transition metal atoms embedded in buckled monolayer g-C3N4 as single-atom catalysts.

We use first-principles calculations to systematically explore the potential of transition metal atoms (Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Ru, Rh, Pd, Ag, Ir, Pt, and Au) embedded in buckled monolayer g-C3N4 as single-atom catalysts. We show that clustering of Sc and Ti on g-C3N4 is thermodynamically impeded and that V, Cr, Mn, and Cu are much less susceptible to clustering than the other TM atoms under investigation. Strong bonding of the transition metal atoms in the cavities of g-C3N4 and high diffusion barriers together are responsible for single-atom fixation. Analysis of the CO oxidation process indicates that embedding of Cr and Mn in g-C3N4 gives rise to promising single-atom catalysts at low temperature.

Strain tuning of the charge density wave in monolayer and bilayer 1T-TaS2.

Using first-principles calculations, we investigate the strain effects on the charge density wave states of monolayer and bilayer 1T-TaS2. The modified stability of the charge density wave in the monolayer is understood in terms of the strain dependent electron localization, which determines the distortion amplitude. On the other hand, in the bilayer, the effect of strain on the interlayer interaction is also crucial. The rich phase diagram under strain opens new venues for applications of 1T-TaS2. We interpret the experimentally observed insulating state of bulk 1T-TaS2 as inherited from the monolayer by effective interlayer decoupling.

Robust half-metallic ferromagnetism and curvature dependent magnetic coupling in fluorinated boron nitride nanotubes.

The fluorinated boron nitride (F-BN) nanostructures are found to be fully spin polarized and half-metallic by means of first-principles calculations based on the Heyd-Scuseria-Ernzerhof hybrid functional. It is found that the full spin polarization and 1 µB local moment in F-BN nanotubes are independent of tube radius and it is also robust in planar ribbons and sheets. The long-ranged ferromagnetic coupling between local moments decreases with decreasing tube radius. This suggests that F-BN systems with small local curvatures could be more easily experimentally observed and have greater potential applications in spin devices.

Twin boundary-assisted lithium ion transport.

With the increased need for high-rate Li-ion batteries, it has become apparent that new electrode materials with enhanced Li-ion transport should be designed. Interfaces, such as twin boundaries (TBs), offer new opportunities to navigate the ionic transport within nanoscale materials. Here, we demonstrate the effects of TBs on the Li-ion transport properties in single crystalline SnO2 nanowires. It is shown that the TB-assisted lithiation pathways are remarkably different from the previously reported lithiation behavior in SnO2 nanowires without TBs. Our in situ transmission electron microscopy study combined with direct atomic-scale imaging of the initial lithiation stage of the TB-SnO2 nanowires prove that the lithium ions prefer to intercalate in the vicinity of the (101̅) TB, which acts as conduit for lithium-ion diffusion inside the nanowires. The density functional theory modeling shows that it is energetically preferred for lithium ions to accumulate near the TB compared to perfect neighboring lattice area. These findings may lead to the design of new electrode materials that incorporate TBs as efficient lithium pathways, and eventually, the development of next generation rechargeable batteries that surpass the rate performance of the current commercial Li-ion batteries.

High catalytic activity and abundant active sites in M2C12 monolayer for nitrogen reduction reaction.

Developing highly efficient single-atom catalysts (SACs) for the nitrogen reduction reaction (NRR) to ammonia production has garnered significant attention in the scientific community. However, achieving high activity and selectivity remains challenging due to the lack of innate activity in most existing catalysts or insufficient active site density. This study delves into the potential of M2C12 materials (M = Cr, Ir, Mn, Mo, Os, Re, Rh, Ru, W, Fe, Cu, and Ti) with high transition metal coverage as SACs for NRR using first-principles calculations. Among these materials, Os2C12 exhibited superior catalytic activity for NRR, with a low overpotential of 0.39 V and an Os coverage of up to 72.53 wt%. To further boost its catalytic activity, a nonmetal (NM) atom doping (NM = B, N, O, and S) and C vacancy modification were explored in Os2C12. It is found that the introduction of O enables exceptional catalytic activity, selectivity, and stability, with an even lower overpotential of 0.07 V. Incorporating the O atom disrupted the charge balance of its coordinating C atoms, effectively increasing the positive charge density of the Os-d-orbit-related electronic structure. This promoted strong d-π* coupling between Os and N2H, enhancing N2H adsorption and facilitating NRR processes. This comprehensive study provides valuable insights into NRR catalyst design for sustainable ammonia production and offers a reference for exploring alternative materials in other catalytic reactions.

Boosting CO2 piezo-reduction via metal-support interactions in Au/ZnO based catalysts.

Confronting the challenge of climate change necessitates innovative approaches for the reduction of CO2 emissions. Metal-support interaction has been widely demonstrated to enable greatly improved performances in thermal-catalytic, photocatalytic and electrocatalytic CO2 reduction. However, its applicability and specifically its role in the emerging piezo-electrocatalytic CO2 reduction are unknown, severely hampering the utilizations of piezo-electrocatalysis in CO2 conversion. Herein, by adopting Au particles supported on ZnO (Au/ZnO) as a paradigm, it is found that the metal-support interaction can remarkably improve the separation and transfer of piezo-carriers and enhance CO2 adsorption. As a result, Au/ZnO demonstrates a substantially boosted activity for piezo-electrocatalytic CO2 reduction and the optimal sample exhibits a 37.3% increase in CO yield compared to the pristine ZnO. The integration of metal-support interactions opens a new avenue to the design of advanced piezo-electrocatalysts for CO2 reduction.

Dynamic surface reconstruction of individual gold nanoclusters by using a co-reactant enables color-tunable electrochemiluminescence.

Here we report for the first time the phenomenon of continuously color-tunable electrochemiluminescence (ECL) from individual gold nanoclusters (Au NCs) confined in a porous hydrogel matrix by adjusting the concentration of the co-reactant. Specifically, the hydrogel-confined Au NCs exhibit strong dual-color ECL in an aqueous solution with triethylamine (TEA) as a co-reactant, with a record-breaking quantum yield of 95%. Unlike previously reported Au NCs, the ECL origin of the hydrogel-confined Au NCs is related to both the Au(0) kernel and the Au(i)-S surface. Surprisingly, the surface-related ECL of Au NCs exhibits a wide color-tunable range of 625-829 nm, but the core-related ECL remains constant at 489 nm. Theoretical and experimental studies demonstrate that the color-tunable ECL is caused by the dynamic surface reconstruction of Au NCs and TEA radicals. This work opens up new avenues for dynamically manipulating the ECL spectra of core-shell emitters in biosensing and imaging research.

NiO Matrix Decorated by Ru Single Atoms: Electron-Rich Ru-Induced High Activity and Selectivity toward Electrochemical N2 Reduction.

Developing a single-atom catalyst with electron-rich active sites is a promising strategy for catalyzing the electrochemical N2 reduction reaction (NRR). Herein, we choose NiO(001) as a model template and deposit a series of single transition metal (TM) atoms with higher formal charges to create the electron-rich active centers. Our first-principles calculations show that low-valent Ru (+2) on NiO(001) can significantly activate N2, with its oxidation states varying from +2 to +4 throughout the catalytic cycle. The Ru/NiO(001) catalyst exhibits the best activity with a relatively low limiting potential of -0.49 V. Furthermore, under NRR operating conditions, the Ru site is primarily occupied by *N2 rather than *H, indicating that NRR overwhelms the hydrogen evolution reaction and thus exhibits excellent selectivity. Our work highlights the potential of designing catalysts with electron-rich active sites for NRR.

Strongly Coupled Ag/Sn-SnO2 Nanosheets Toward CO2 Electroreduction to Pure HCOOH Solutions at Ampere-Level Current.

Electrocatalytic reduction of CO2 converts intermittent renewable electricity into value-added liquid products with an enticing prospect, but its practical application is hampered due to the lack of high-performance electrocatalysts. Herein, we elaborately design and develop strongly coupled nanosheets composed of Ag nanoparticles and Sn-SnO2 grains, designated as Ag/Sn-SnO2 nanosheets (NSs), which possess optimized electronic structure, high electrical conductivity, and more accessible sites. As a result, such a catalyst exhibits unprecedented catalytic performance toward CO2-to-formate conversion with near-unity faradaic efficiency (≥ 90%), ultrahigh partial current density (2,000 mA cm-2), and superior long-term stability (200 mA cm-2, 200 h), surpassing the reported catalysts of CO2 electroreduction to formate. Additionally, in situ attenuated total reflection-infrared spectra combined with theoretical calculations revealed that electron-enriched Sn sites on Ag/Sn-SnO2 NSs not only promote the formation of *OCHO and alleviate the energy barriers of *OCHO to *HCOOH, but also impede the desorption of H*. Notably, the Ag/Sn-SnO2 NSs as the cathode in a membrane electrode assembly with porous solid electrolyte layer reactor can continuously produce ~ 0.12 M pure HCOOH solution at 100 mA cm-2 over 200 h. This work may inspire further development of advanced electrocatalysts and innovative device systems for promoting practical application of producing liquid fuels from CO2.

Band Position-Independent Piezo-Electrocatalysis for Ultrahigh CO2 Conversion.

Piezo-electrocatalysis as an emerging mechano-to-chemistry energy conversion technique opens multiple innovative opportunities and draws great interest over the past decade. However, the two potential mechanisms in piezo-electrocatalysis, i.e., screening charge effect and energy band theory, generally coexist in the most piezoelectrics, making the essential mechanism remain controversial. Here, for the first time, the two mechanisms in piezo-electrocatalytic CO2 reduction reaction (PECRR) is distinguished through a narrow-bandgap piezo-electrocatalyst strategy using MoS2 nanoflakes as demo. With conduction band of -0.12 eV, the MoS2 nanoflakes are unsatisfied for CO2 -to-CO redox potential of -0.53 eV, yet they achieve an ultrahigh CO yield of ≈543.1 µmol g-1  h-1 in PECRR. Potential band position shifts under vibration are still unsatisfied with CO2 -to-CO potential verified by theoretical investigation and piezo-photocatalytic experiment, further indicating that the mechanism of piezo-electrocatalysis is independent of band position. Besides, MoS2 nanoflakes exhibit unexpected intense "breathing" effect under vibration and enable the naked-eye-visible inhalation of CO2 gas, independently achieving the complete carbon cycle chain from CO2 capture to conversion. The CO2 inhalation and conversion processes in PECRR are revealed by a self-designed in situ reaction cell. This work brings new insights into the essential mechanism and surface reaction evolution of piezo-electrocatalysis.

Surface structure and phase transition of K adsorption on Au(111): by ab initio atomistic thermodynamics.

We studied the interactions between atomic potassium (K) and Au(111) at a range of coverage (i.e., Θ(K) = 0.11-0.5 monolayer (ML)) by ab initio atomic thermodynamics. For K on-surface adsorption, we found that K energetically favors the three-fold hollow sites (fcc or hcp), while the most significant surface rumpling was obtained at the atop sites. The incorporation of gold atoms in the adsorbate layer gradually becomes energetically favorable with increasing K coverage. We proposed a possible model with a stoichiometry of K(2)Au for the (2 × 2)-0.5 ML phase observed in lower energy electron diffraction (LEED): one K at atop site and the other K as well as one Au adatom at the second-nearest fcc/hcp and hcp/fcc, respectively. Clear theoretical evidences were given for the ionic interaction of K on Au surface. Additionally, phase transitions were predicted based on chemical potential equilibrium of K, largely in line with the earlier reported LEED observations: the clean surface → (√3 × âˆš3)R30° → (2 × 2), and (2 × 2) → (√3 × âˆš3)R30° reversely at an elevated temperature.

Dirac Fermions in the Boron Nitride Monolayer with a Tetragon.

Two-dimensional (2D) boron nitride (BN) is a promising candidate for aerospace materials due to its excellent mechanical and thermal stability properties. However, its unusually prominent band gap limits its application prospects. In this work, we report a gapless monolayer BN, t-BN, which has four anisotropic Dirac cones in the first Brillouin zone exactly at the Fermi level. To further confirm the semimetallic character, the nontrivial topological properties are proven through the topologically protected edge states and the invariant non-zero Z2. Additionally, the Young's modulus and Poisson ratio characterize the strong mechanical strength of t-BN. Our theoretical predictions provide more possibilities for exploring the Dirac cone in BN, which will enhance the 2D boron derivative materials.

Interaction between NO and Na, O, S, Cl on Au and Pd(111) surfaces.

NO co-adsorption with X (X = Na, O, S, and Cl) on Au and Pd(111) surfaces is studied using density functional theory (DFT) calculations to get a deeper insight into the extraordinary sulfur enhanced adsorption on the Au surface. It is found that both electronegative and electropositive adatoms can enhance NO adsorption on Au(111). In Na + NO/Au(111), the strong electrostatic attraction between Na and NO dominates and stabilizes NO adsorption, though Na-induced surface negative charging weakens NO adsorption. In (O, S, Cl) + NO/Au, the electronegative atoms would induce a slight surface distortion and enhance NO adsorption accordingly. NO adsorption on Pd(111) is enhanced by Na, but weakened by electronegative species. We suggest that the unique features of noble metals, i.e., the narrow DOS at the Fermi level (E(F)) and the deep buried d-band center, should play an important role in the promotion of NO adsorption on their surface as the CO case.