The kinematics of amblypygid (Arachnida) pedipalps during predation: extreme elongation in raptorial appendages does not result in a proportionate increase in reach and closing speed.

The link between form and function is key to understanding the evolution of unique and/or extreme morphologies. Amblypygids, or whip spiders, are arachnids that often have highly elongated spined pedipalps. These limbs are used to strike at, and secure, prey before processing by the chelicerae. Amblypygi pedipalps are multifunctional, however, being used in courtship and contest, and vary greatly in form between species. Increased pedipalp length may improve performance during prey capture, but length could also be influenced by factors including territorial contest and sexual selection. Here, for the first time, we used high-speed videography and manual tracking to investigate kinematic differences in prey capture between amblypygid species. Across six morphologically diverse species, spanning four genera and two families, we created a total dataset of 86 trials (9-20 per species). Prey capture kinematics varied considerably between species, with differences being expressed in pedipalp joint angle ranges. In particular, maximum reach ratio did not remain constant with total pedipalp length, as geometric scaling would predict, but decreased with longer pedipalps. This suggests that taxa with the most elongated pedipalps do not deploy their potential length advantage to proportionally increase reach. Therefore, a simple mechanical explanation of increased reach does not sufficiently explain pedipalp elongation. We propose other factors to help explain this phenomenon, such as social interactions or sexual selection, which would produce an evolutionary trade-off in pedipalp length between prey capture performance and other behavioural and/or anatomical pressures.

Evolutionary versatility of the avian neck.

Bird necks display unparalleled levels of morphological diversity compared to other vertebrates, yet it is unclear what factors have structured this variation. Using three-dimensional geometric morphometrics and multivariate statistics, we show that the avian cervical column is a hierarchical morpho-functional appendage, with varying magnitudes of ecologically driven osteological variation at different scales of organization. Contrary to expectations given the widely varying ecological functions of necks in different species, we find that regional modularity of the avian neck is highly conserved, with an overall structural blueprint that is significantly altered only by the most mechanically demanding ecological functions. Nevertheless, the morphologies of vertebrae within subregions of the neck show more prominent signals of adaptation to ecological pressures. We also find that both neck length allometry and the nature of neck elongation in birds are different from other vertebrates. In contrast with mammals, neck length scales isometrically with head mass and, contrary to previous work, we show that neck elongation in birds is achieved predominantly by increasing vertebral lengths rather than counts. Birds therefore possess a cervical spine that may be unique in its versatility among extant vertebrates, one that, since the origin of flight, has adapted to function as a surrogate forelimb in varied ecological niches.

Postcopulatory sexual selection and the evolution of shape complexity in the carnivoran baculum.

The baculum is an enigmatic bone within the mammalian glans penis, and the driving forces behind its often bizarre shape have captivated evolutionary biologists for over a century. Hypotheses for the function of the baculum include aiding in intromission, stimulating females and assisting with prolonged mating. Previous attempts to test these hypotheses have focused on the gross size of the baculum and have failed to reach a consensus. We conducted three-dimensional imaging and apply a new method to quantify three-dimensional shape complexity in the carnivoran baculum. We show that socially monogamous species are evolving towards complex-shaped bacula, whereas group-living species are evolving towards simple bacula. Overall three-dimensional baculum shape complexity is not related to relative testes mass, but tip complexity is higher in induced ovulators and species engaging in prolonged copulation. Our study provides evidence of postcopulatory sexual selection pressures driving three-dimensional shape complexity in the carnivore baculum.

Alpha shapes: determining 3D shape complexity across morphologically diverse structures.

BACKGROUND: Following recent advances in bioimaging, high-resolution 3D models of biological structures are now generated rapidly and at low-cost. To use this data to address evolutionary and ecological questions, an array of tools has been developed to conduct shape analysis and quantify topographic complexity. Here we focus particularly on shape techniques applied to irregular-shaped objects lacking clear homologous landmarks, and propose a new 'alpha-shapes' method for quantifying 3D shape complexity. METHODS: We apply alpha-shapes to quantify shape complexity in the mammalian baculum as an example of a morphologically disparate structure. Micro- computed-tomography (µCT) scans of bacula were conducted. Bacula were binarised and converted into point clouds. Following application of a scaling factor to account for absolute size differences, a suite of alpha-shapes was fitted per specimen. An alpha shape is formed from a subcomplex of the Delaunay triangulation of a given set of points, and ranges in refinement from a very coarse mesh (approximating convex hulls) to a very fine fit. 'Optimal' alpha was defined as the refinement necessary in order for alpha-shape volume to equal CT voxel volume, and was taken as a metric of overall 'complexity'. RESULTS: Our results show that alpha-shapes can be used to quantify interspecific variation in shape 'complexity' within biological structures of disparate geometry. The 'stepped' nature of alpha curves is informative with regards to the contribution of specific morphological features to overall 'complexity'. Alpha-shapes agrees with other measures of complexity (dissection index, Dirichlet normal energy) in identifying ursid bacula as having low shape complexity. However, alpha-shapes estimates mustelid bacula as being most complex, contrasting with other shape metrics. 3D fractal dimension is identified as an inappropriate metric of complexity when applied to bacula. CONCLUSIONS: Alpha-shapes is used to calculate 'optimal' alpha refinement as a proxy for shape 'complexity' without identifying landmarks. The implementation of alpha-shapes is straightforward, and is automated to process large datasets quickly. We interpret alpha-shapes as being particularly sensitive to concavities in surface topology, potentially distinguishing it from other shape complexity metrics. Beyond genital shape, the alpha-shapes technique holds considerable promise for new applications across evolutionary, ecological and palaeoecological disciplines.

Testing hypotheses for the function of the carnivoran baculum using finite-element analysis.

The baculum (os penis) is a mineralized bone within the glans of the mammalian penis and is one of the most morphologically diverse structures in the mammal skeleton. Recent experimental work provides compelling evidence for sexual selection shaping the baculum, yet the functional mechanism by which this occurs remains unknown. Previous studies have tested biomechanical hypotheses for the role of the baculum based on simple metrics such as length and diameter, ignoring the wealth of additional shape complexity present. For the first time, to our knowledge, we apply a computational simulation approach (finite-element analysis; FEA) to quantify the three-dimensional biomechanical performance of carnivoran bacula (n = 74) based upon high-resolution micro-computed tomography scans. We find a marginally significant positive correlation between sexual size dimorphism and baculum stress under compressive loading, counter to the 'vaginal friction' hypothesis of bacula becoming more robust to overcome resistance during initial intromission. However, a highly significant negative relationship exists between intromission duration and baculum stress under dorsoventral bending. Furthermore, additional FEA simulations confirm that the presence of a ventral groove would reduce deformation of the urethra. We take this as evidence in support of the 'prolonged intromission' hypothesis, suggesting the carnivoran baculum has evolved in response to pressures on the duration of copulation and protection of the urethra.

No apparent ecological trend to the flight-initiating jump performance of five bat species.

The jump performance of five insectivorous bat species (Miniopterus schreibersii, Myotis blythii, Myotis capaccinii, Myotis myotis and Rhinolophus blasii) was filmed using a high-speed camera. All study bats jumped using a similar technique, with the wing musculature providing the force. The bats jumped off the wrist joint of their wings, typically with their feet already off the ground. Contrary to expectations, jump performance did not correlate with ecology and was instead strongly determined by body size. In general, the larger bats produced more jump force, left the ground at higher speeds and jumped higher than the smaller bats. The differences in force production disappeared when the data were corrected for body size, with the exception of Myotis capaccinii, which produced significantly less force. Scaling of jump performance with body size measured here was compared against two existing muscle performance scaling models. The model suggesting that muscle contraction velocity is proportional to muscle length was better supported than that based on muscle cross-sectional area. Both models, however, failed to accurately predict the scaling of jump forces, with the slope of the relationship being significantly steeper than predicted, highlighting the need for further investigations of vertebrate muscle performance scaling. The results of this study indicate that a bat's jumping ability is a secondary locomotor ability that uses the strongly selected-for flight apparatus with no apparent ecological trend present, i.e. flight so dominates bat locomotor morphology that other locomotor abilities tend to be derivative.

3D genital shape complexity in female marine mammals.

Comparisons of 3D shapes have recently been applied to diverse anatomical structures using landmarking techniques. However, discerning evolutionary patterns can be challenging for structures lacking homologous landmarks. We used alpha shape analyses to quantify vaginal shape complexity in 40 marine mammal specimens including cetaceans, pinnipeds, and sirenians. We explored phylogenetic signal and the potential roles of natural and sexual selection on vaginal shape evolution. Complexity scores were consistent with qualitative observations. Cetaceans had a broad range of alpha complexities, while pinnipeds were comparatively simple and sirenians were complex. Intraspecific variation was found. Three-dimensional surface heat maps revealed that shape complexity was driven by invaginations and protrusions of the vaginal wall. Phylogenetic signal was weak and metrics of natural selection (relative neonate size) and sexual selection (relative testes size, sexual size dimorphism, and penis morphology) did not explain vaginal complexity patterns. Additional metrics, such as penile shape complexity, may yield interesting insights into marine mammal genital coevolution. We advocate for the use of alpha shapes to discern patterns of evolution that would otherwise not be possible in 3D anatomical structures lacking homologous landmarks.

Keep your head down: Maintaining gait stability in challenging conditions.

BACKGROUND: Peripheral vision often deteriorates with age, disrupting our ability to maintain normal locomotion. Laboratory based studies have shown that lower visual field loss, in particular, is associated with changes in gaze and gait behaviour whilst walking and this, in turn, increases the risk of falling in the elderly. Separately, gaze and gait behaviours change and fall risk increases when walking over complex surfaces. It seems probable, but has not yet been established, that these challenges to stability interact. RESEARCH QUESTION: How does loss of the lower visual field affect gaze and gait behaviour whilst walking on a variety of complex surfaces outside of the laboratory? Specifically, is there a synergistic interaction between the effects on behaviour of blocking the lower visual field and increased surface complexity? METHODS: We compared how full vision versus simulated lower visual field loss affected a diverse range of behavioural measures (head pitch angle, eye angle, muscle coactivation, gait speed and walking smoothness as measured by harmonic ratios) in young participants. Participants walked over a range of surfaces of different complexity, including pavements, grass, steps and pebbles. RESULTS: In both full vision and blocked lower visual field conditions, surface complexity influenced gaze and gait behaviour. For example, more complex surfaces were shown to be associated with lowered head pitch angles, increased leg muscle coactivation, reduced gait speed and decreased walking smoothness. Relative to full vision, blocking the lower visual field caused a lowering of head pitch, especially for more complex surfaces. However, crucially, muscle coactivation, gait speed and walking smoothness did not show a significant change between full vision and blocked lower visual field conditions. Finally, head pitch angle, muscle coactivation, gait speed and walking smoothness were all correlated highly with each other. SIGNIFICANCE: Our study showed that blocking the lower visual field did not significantly change muscle coactivation, gait speed or walking smoothness. This suggests that young people cope well when walking with a blocked lower visual field, making minimal behavioural changes. Surface complexity had a greater effect on gaze and gait behaviour than blocking the lower visual field. Finally, head pitch angle was the only measure that showed a significant synergistic interaction between surface complexity and blocking the lower visual field. Together our results indicate that, first, a range of changes occur across the body when people walk over more complex surfaces and, second, that a relatively simple behavioural change (to gaze) suffices to maintain normal gait when the lower visual field is blocked, even in more challenging environments. Future research should assess whether young people cope as effectively when several impairments are simulated, representative of the comorbidities found with age.

Look out: an exploratory study assessing how gaze (eye angle and head angle) and gait speed are influenced by surface complexity.

BACKGROUND: Most research investigating the connection between walking and visual behaviour has assessed only eye movements (not head orientation) in respect to locomotion over smooth surfaces in a laboratory. This is unlikely to reflect gaze changes found over the complex surfaces experienced in the real world, especially given that eye and head movements have rarely been assessed simultaneously. RESEARCH QUESTION: How does gaze (eye and head) angle and gait speed change when walking over surfaces of different complexity? METHODS: In this exploratory study, we used a mobile eye tracker to monitor eye movements and inertia measurement unit sensors (IMUs) to measure head angle whilst subjects (n = 11) walked over surfaces with different complexities both indoors and outdoors. Gait speed was recorded from ankle IMUs. RESULTS: Overall, mean gaze angle was lowest over the most complex surface and this surface also elicited the slowest mean gait speed. The head contributed increasingly to the lowering of gaze with increased surface complexity. Less complex surfaces showed no significant difference between gaze and gait behaviour. SIGNIFICANCE: This study supports previous research showing that increased surface complexity is an important factor in determining gaze and gait behaviour. Moreover, it provides the novel finding that head movements provide important contributions to gaze location. Our future research aims are to further assess the role of the head in determining gaze location during locomotion across a greater range of complex surfaces to determine the key surface characteristics that influence gaze during gait.

Physical and perceptual measures of walking surface complexity strongly predict gait and gaze behaviour.

BACKGROUND: Walking surfaces vary in complexity and are known to affect stability and fall risk whilst walking. However, existing studies define surfaces through descriptions only. OBJECTIVE: This study used a multimethod approach to measure surface complexity in order to try to characterise surfaces with respect to locomotor stability. METHODS: We assessed how physical measurements of walking surface complexity compared to participant's perceptual ratings of the effect of complexity on stability. Physical measurements included local slope measures from the surfaces themselves and shape complexity measured using generated surface models. Perceptual measurements assessed participants' perceived stability and surface roughness using Likert scales. We then determined whether these measurements were indicative of changes to stability as assessed by behavioural changes including eye angle, head pitch angle, muscle coactivation, walking speed and walking smoothness. RESULTS: Physical and perceptual measures were highly correlated, with more complex surfaces being perceived as more challenging to stability. Furthermore, complex surfaces, as defined from both these measurements, were associated with lowered head pitch, increased muscle coactivation and reduced walking smoothness. SIGNIFICANCE: Our findings show that walking surfaces defined as complex, based on physical measurements, are perceived as more challenging to our stability. Furthermore, certain behavioural measures relate better to these perceptual and physical measures than others. Crucially, for the first time this study defined walking surfaces objectively rather than just based on subjective descriptions. This approach could enable future researchers to compare results across walking surface studies. Moreover, perceptual measurements, which can be collected easily and efficiently, could be used as a proxy for estimating behavioural responses to different surfaces. This could be particularly valuable when determining risk of instability when walking for individuals with compromised stability.

An advanced shape-fitting algorithm applied to quadrupedal mammals: improving volumetric mass estimates.

Body mass is a fundamental physical property of an individual and has enormous bearing upon ecology and physiology. Generating reliable estimates for body mass is therefore a necessary step in many palaeontological studies. Whilst early reconstructions of mass in extinct species relied upon isolated skeletal elements, volumetric techniques are increasingly applied to fossils when skeletal completeness allows. We apply a new 'alpha shapes' (α-shapes) algorithm to volumetric mass estimation in quadrupedal mammals. α-shapes are defined by: (i) the underlying skeletal structure to which they are fitted; and (ii) the value α, determining the refinement of fit. For a given skeleton, a range of α-shapes may be fitted around the individual, spanning from very coarse to very fine. We fit α-shapes to three-dimensional models of extant mammals and calculate volumes, which are regressed against mass to generate predictive equations. Our optimal model is characterized by a high correlation coefficient and mean square error (r (2)=0.975, m.s.e.=0.025). When applied to the woolly mammoth (Mammuthus primigenius) and giant ground sloth (Megatherium americanum), we reconstruct masses of 3635 and 3706 kg, respectively. We consider α-shapes an improvement upon previous techniques as resulting volumes are less sensitive to uncertainties in skeletal reconstructions, and do not require manual separation of body segments from skeletons.

Excepting Myotis capaccinii, the wings' contribution to take-off performance does not correlate with foraging ecology in six species of insectivorous bat.

Take-off in bats is separated into two distinct phases: an initial jump and a subsequent wing powered acceleration. Here, using footage from a high-speed camera, the first comparative study of the performance during the wing induced phase of take-off in six insectivorous bat species is described. Despite distinct differences in foraging strategy, the mass specific power generated by the bats during wing induced take-off did not differ between species, with the exception of Myotis capaccinii. This suggests that differences in take-off performance may only be evident in bats that exhibit particularly unusual foraging strategies, such as the trawling behaviour of M. capaccinii - with differences in the remaining species only manifesting in subtler aspects of flight performance such as agility or manoeuvrability. The poorer take-off performance of M. capaccinii could be related to either a reduction in wing-stroke amplitude to stop the wings hitting the water's surface during foraging or perhaps an effect of having very large feet. No scaling relationship between body mass and mass-specific take-off power was found, which supports earlier research on birds and insects, suggesting that the mass-specific muscle power available for flight is broadly similar across a large range of body sizes and species.

A potential role for bat tail membranes in flight control.

Wind tunnel tests conducted on a model based on the long-eared bat Plecotus auritus indicated that the positioning of the tail membrane (uropatagium) can significantly influence flight control. Adjusting tail position by increasing the angle of the legs ventrally relative to the body has a two-fold effect; increasing leg-induced wing camber (i.e., locally increased camber of the inner wing surface) and increasing the angle of attack of the tail membrane. We also used our model to examine the effects of flying with and without a tail membrane. For the bat model with a tail membrane increasing leg angle increased the lift, drag and pitching moment (nose-down) produced. However, removing the tail membrane significantly reduced the change in pitching moment with increasing leg angle, but it had no significant effect on the level of lift produced. The drag on the model also significantly increased with the removal of the tail membrane. The tail membrane, therefore, is potentially important for controlling the level of pitching moment produced by bats and an aid to flight control, specifically improving agility and manoeuvrability. Although the tail of bats is different from that of birds, in that it is only divided from the wings by the legs, it nonetheless, may, in addition to its prey capturing function, fulfil a similar role in aiding flight control.