RESUMO
Additively manufactured lattices have been adopted in applications ranging from medical implants to aerospace components. For solid AM components, the effect of build parameters has been well studied but comparably little attention has been paid to the influence of build parameters on lattice performance. For this project, the main aim was to evaluate static compressive mechanical performance of regular and stochastic lattices as a function of build parameters. The second aim was to compare strut dimensions of the metal lattice structures as build parameters were changed. Both regular and stochastic lattices were fabricated with a designed strut diameter of either 200 µm or 300 µm on a laser powder bed fusion machine. A range of laser power (140-180 W), scan speed (1700-2100 mm/s), and laser offset (0-45 µm) were used in fabricating each lattice. Compression tests were performed following the ISO 13314 (2011) standard to measure modulus, yield strength, and ultimate compressive strength values. Laser power adjustments produced the most significant effect on lattice performance. A change of 50 W resulted in roughly a 2X increase in maximum load and modulus for both regular and stochastic lattice structures. Regular lattice structures had a higher mechanical response during the mechanical evaluation. Internal strut diameters varied between build parameters as well, with laser offset adjustments producing the most noticeable change in strut geometry between lattice samples. These findings suggest that build parameter optimization, in lieu of using OEM parameters developed for solid structures, is necessary to ensure the optimum mechanical performance of AM lattice structures.