Exploring the Impact of Active Site Structure on the Conversion of Methane to Methanol in Cu-Exchanged Zeolites.

In the past, Cu-oxo or -hydroxy clusters hosted in zeolites have been suggested to enable the selective conversion of methane to methanol, but the impact of the active site's stoichiometry and structure on methanol production is still poorly understood. Herein, we apply theoretical modeling in conjunction with experiments to study the impact of these two factors on partial methane oxidation in the Cu-exchanged zeolite SSZ-13. Phase diagrams developed from first-principles suggest that Cu-hydroxy or Cu-oxo dimers are stabilized when O2 or N2O are used to activate the catalyst, respectively. We confirm these predictions experimentally and determine that in a stepwise conversion process, Cu-oxo dimers can convert twice as much methane to methanol compared to Cu-hydroxyl dimers. Our theoretical models rationalize how Cu-di-oxo dimers can convert up to two methane molecules to methanol, while Cu-di-hydroxyl dimers can convert only one methane molecule to methanol per catalytic cycle. These findings imply that in Cu clusters, at least one oxo group or two hydroxyl groups are needed to convert one methane molecule to methanol per cycle. This simple structure-activity relationship allows to intuitively understand the potential of small oxygenated or hydroxylated transition metal clusters to convert methane to methanol.

Ordering Transitions of Liquid Crystals Triggered by Metal Oxide-catalyzed Reactions of Sulfur Oxide Species.

Liquid crystals (LCs), when supported on reactive surfaces, undergo changes in ordering that can propagate over distances of micrometers, thus providing a general and facile mechanism to amplify atomic-scale transformations on surfaces into the optical scale. While reactions on organic and metal substrates have been coupled to LC-ordering transitions, metal oxide substrates, which offer unique catalytic activities for reactions involving atmospherically important chemical species such as oxidized sulfur species, have not been explored. Here, we investigate this opportunity by designing LCs that contain 4'-cyanobiphenyl-4-carboxylic acid (CBCA) and respond to surface reactions triggered by parts-per-billion concentrations of SO2 gas on anatase (101) substrates. We used electronic structure calculations to predict that the carboxylic acid group of CBCA binds strongly to anatase (101) in a perpendicular orientation, a prediction that we validated in experiments in which CBCA (0.005 mol %) was doped into an LC (4'-n-pentyl-4-biphenylcarbonitrile). Both experiment and computational modeling further demonstrated that SO3-like species, produced by a surface-catalyzed reaction of SO2 with H2O on anatase (101), displace CBCA from the anatase surface, resulting in an orientational transition of the LC. Experiments also reveal the LC response to be highly selective to SO2 over other atmospheric chemical species (including H2O, NH3, H2S, and NO2), in agreement with our computational predictions for anatase (101) surfaces. Overall, we establish that the catalytic activities of metal oxide surfaces offer the basis of a new class of substrates that trigger LCs to undergo ordering transitions in response to chemical species of relevance to atmospheric chemistry.

Amplification of Elementary Surface Reaction Steps on Transition Metal Surfaces Using Liquid Crystals: Dissociative Adsorption and Dehydrogenation.

Elementary reaction steps, including adsorption and dissociation, of a range of molecular adsorbates on transition metal surfaces have been elucidated in the context of chemical catalysis. Here we leverage this knowledge to design liquid crystals (LCs) supported on ultrathin polycrystalline gold films (predominant crystallographic face is (111)) that are triggered to undergo orientational transitions by dissociative adsorption and dehydrogenation reactions involving chlorine and carboxylic acids, respectively, thus amplifying these atomic-scale surface processes in situ into macroscopic optical signals. We use electronic structure calculations to predict that 4'-n-pentyl-4-biphenylcarbonitrile (5CB), a room temperature nematic LC, does not bind to Au(111) in an orientation that changes upon dissociative adsorption of molecular chlorine, a result validated by experiments. In contrast, 4-cyano-4-biphenylcarboxylic acid (CBCA) is calculated to bind strongly to Au(111) in a perpendicular orientation via dehydrogenation of the carboxylic acid group, which we confirmed using polarization-modulation infrared reflection-absorption spectroscopy. A maximum coverage of 0.07 monolayer of CBCA on the gold surface is sufficient to cause a perpendicular orientation of the LC. Dissociative adsorption of Cl2 gas on the gold surface, resulting in 0.5 monolayer coverage of Cl, displaces CBCA from Au(111) and thus triggers a strikingly visible change in orientation of the LC. Infrared spectroscopy established the orientation of adsorbed CBCA to be parallel to the Cl covered surface, with the COOH plane perpendicular to the surface, as predicted by first-principles calculations. These results demonstrate the use of first-principles calculations and transition metal surfaces to design LCs that report in situ targeted atomic-scale surface processes.

Electroreduction of Carbon Dioxide to Hydrocarbons Using Bimetallic Cu-Pd Catalysts with Different Mixing Patterns.

Electrochemical conversion of CO2 holds promise for utilization of CO2 as a carbon feedstock and for storage of intermittent renewable energy. Presently Cu is the only metallic electrocatalyst known to reduce CO2 to appreciable amounts of hydrocarbons, but often a wide range of products such as CO, HCOO-, and H2 are formed as well. Better catalysts that exhibit high activity and especially high selectivity for specific products are needed. Here a range of bimetallic Cu-Pd catalysts with ordered, disordered, and phase-separated atomic arrangements (Cuat:Pdat = 1:1), as well as two additional disordered arrangements (Cu3Pd and CuPd3 with Cuat:Pdat = 3:1 and 1:3), are studied to determine key factors needed to achieve high selectivity for C1 or C2 chemicals in CO2 reduction. When compared with the disordered and phase-separated CuPd catalysts, the ordered CuPd catalyst exhibits the highest selectivity for C1 products (>80%). The phase-separated CuPd and Cu3Pd achieve higher selectivity (>60%) for C2 chemicals than CuPd3 and ordered CuPd, which suggests that the probability of dimerization of C1 intermediates is higher on surfaces with neighboring Cu atoms. Based on surface valence band spectra, geometric effects rather than electronic effects seem to be key in determining the selectivity of bimetallic Cu-Pd catalysts. These results imply that selectivities to different products can be tuned by geometric arrangements. This insight may benefit the design of catalytic surfaces that further improve activity and selectivity for CO2 reduction.

Actuating Liquid Crystals Rapidly and Reversibly by Using Chemical Catalysis.

Microtubules and catalytic motor proteins underlie the microscale actuation of living materials, and they have been used in reconstituted systems to harness chemical energy to drive new states of organization of soft matter (e.g., liquid crystals (LCs)). Such materials, however, are fragile and challenging to translate to technological contexts. Rapid (sub-second) and reversible changes in the orientations of LCs at room temperature using reactions between gaseous hydrogen and oxygen that are catalyzed by Pd/Au surfaces are reported. Surface chemical analysis and computational chemistry studies confirm that dissociative adsorption of H2 on the Pd/Au films reduces preadsorbed O and generates 1 ML of adsorbed H, driving nitrile-containing LCs from a perpendicular to a planar orientation. Subsequent exposure to O2 leads to oxidation of the adsorbed H, reformation of adsorbed O on the Pd/Au surface, and a return of the LC to its initial orientation. The roles of surface composition and reaction kinetics in determining the LC dynamics are described along with a proof-of-concept demonstration of microactuation of beads. These results provide fresh ideas for utilizing chemical energy and catalysis to reversibly actuate functional LCs on the microscale.

Elucidating Molecular-Scale Principles Governing the Anchoring of Liquid Crystal Mixtures on Solid Surfaces.

Computational chemistry calculations are broadly useful for guiding the atom-scale design of hard-soft material interfaces including how molecular interactions of single-component liquid crystals (LCs) at inorganic surfaces lead to preferred orientations of the LC far from the surface. The majority of LCs, however, are not single-component phases but comprise of mixtures, such as a mixture of mesogens, added to provide additional functions such as responsiveness to the presence of targeted organic compounds (for chemical sensing). In such LC mixtures, little is understood about the near-surface composition and organization of molecules and how that organization propagates into the far-field LC orientation. Here, we address this broad question by using a multiscale computational approach that combines density functional theory (DFT)-based calculations and classical molecular dynamics (MD) simulations to predict the interfacial composition and organization of a binary LC mixture of 4'-cyano-4-biphenylcarbolxylic acid (CBCA) and 4'-n-pentyl-4-biphenylcarbonitrile (5CB) supported on anatase (101) titania surfaces. DFT calculations determine the surface composition and atomic-scale organization of CBCA and 5CB at the titania surface, and classical MD simulations build upon the DFT description to describe the evolution of the near-surface order into the bulk LC. A surprising finding is that the 5CB and CBCA molecules adopt orthogonal orientations at the anatase surface and that, above a threshold concentration of CBCA, this mixture of orientations evolves away from the surface to define a uniform far-field homeotropic orientation. These results demonstrate that molecular-level knowledge achieved through a combination of computational techniques permits the design and understanding of functional LC mixtures at interfaces.

Coupling the chemical reactivity of bimetallic surfaces to the orientations of liquid crystals.

The development of responsive soft materials with tailored functional properties based on the chemical reactivity of atomically precise inorganic interfaces has not been widely explored. In this communication, guided by first-principles calculations, we design bimetallic surfaces comprised of atomically thin Pd layers deposited onto Au that anchor nematic liquid crystalline phases of 4'-n-pentyl-4-biphenylcarbonitrile (5CB) and demonstrate that the chemical reactivity of these bimetallic surfaces towards Cl2 gas can be tuned by specification of the composition of the surface alloy. Specifically, we use underpotential deposition to prepare submonolayer to multilayers of Pd on Au and employ X-ray photoelectron and infrared spectroscopy to validate computational predictions that binding of 5CB depends strongly on the Pd coverage, with ∼0.1 monolayer (ML) of Pd sufficient to cause the liquid crystal (LC) to adopt a perpendicular binding mode. Computed heats of dissociative adsorption of Cl2 on PdAu alloy surfaces predict displacement of 5CB from these surfaces, a result that is also confirmed by experiments revealing that 1 ppm Cl2 triggers orientational transitions of 5CB. By decreasing the coverage of Pd on Au from 1.8 ± 0.2 ML to 0.09 ± 0.02 ML, the dynamic response of 5CB to 1 ppm Cl2 is accelerated 3X. Overall, these results demonstrate the promise of hybrid designs of responsive materials based on atomically precise interfaces formed between hard bimetallic surfaces and soft matter.

A metal-free electrocatalyst for carbon dioxide reduction to multi-carbon hydrocarbons and oxygenates.

Electroreduction of carbon dioxide into higher-energy liquid fuels and chemicals is a promising but challenging renewable energy conversion technology. Among the electrocatalysts screened so far for carbon dioxide reduction, which includes metals, alloys, organometallics, layered materials and carbon nanostructures, only copper exhibits selectivity towards formation of hydrocarbons and multi-carbon oxygenates at fairly high efficiencies, whereas most others favour production of carbon monoxide or formate. Here we report that nanometre-size N-doped graphene quantum dots (NGQDs) catalyse the electrochemical reduction of carbon dioxide into multi-carbon hydrocarbons and oxygenates at high Faradaic efficiencies, high current densities and low overpotentials. The NGQDs show a high total Faradaic efficiency of carbon dioxide reduction of up to 90%, with selectivity for ethylene and ethanol conversions reaching 45%. The C2 and C3 product distribution and production rate for NGQD-catalysed carbon dioxide reduction is comparable to those obtained with copper nanoparticle-based electrocatalysts.