Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 3 de 3
Filtrar
Mais filtros

Base de dados
Ano de publicação
Tipo de documento
País de afiliação
Intervalo de ano de publicação
1.
Materials (Basel) ; 15(6)2022 Mar 11.
Artigo em Inglês | MEDLINE | ID: mdl-35329518

RESUMO

The n-type GaN epilayers with low electron density were developed on a native substrate using the metalorganic vapour phase epitaxy method and investigated under pulsed electric fields until material breakdown and optically in the spectrum range from 0.1 THz to 60 THz at two temperatures of 77 K and 300 K. The epilayers demonstrated the low-field electron mobility and density values reaching up to 1021 cm2/V·s and 1.06 × 1016 cm-3 (at 300 K) and 2652 cm2/V·s and 0.21 × 1016 cm-3 (at 77 K), respectively. Maximum injected electric power value till the damage of the GaN epilayer was found to be up to 1.8 GW/cm3 and 5.1 GW/cm3 at 77 K and 300 K, respectively. The results indicate new practical possibilities of the GaN material controlled by an external electric field.

2.
ACS Appl Mater Interfaces ; 13(6): 7476-7484, 2021 Feb 17.
Artigo em Inglês | MEDLINE | ID: mdl-33529520

RESUMO

In this work, we study the thermal degradation of In-rich InxGa1-xN quantum wells (QWs) and propose explanation of its origin based on the diffusion of metal vacancies. The structural transformation of the InxGa1-xN QWs is initiated by the formation of small initial voids created due to agglomeration of metal vacancies diffusing from the layers beneath the QW. The presence of voids in the QW relaxes the mismatch stress in the vicinity of the void and drives In atoms to diffuse to the relaxed void surroundings. The void walls enriched in In atoms are prone for thermal decomposition, what leads to a subsequent disintegration of the surrounding lattice. The phases observed in the degraded areas of QWs contain voids partly filled with crystalline In and amorphous material, surrounded by the rim of high In-content InxGa1-xN or pure InN; the remaining QW between the voids contains residual amount of In. In the case of the InxGa1-xN QWs deposited on the GaN layer doped to n-type or on unintentionally doped GaN, we observe a preferential degradation of the first grown QW, while doping of the underlying GaN layer with Mg prevents the degradation of the closest InxGa1-xN QW. The reduction in the metal vacancy concentration in the InxGa1-xN QWs and their surroundings is crucial for making them more resistant to thermal degradation.

3.
Sci Rep ; 11(1): 2458, 2021 Jan 28.
Artigo em Inglês | MEDLINE | ID: mdl-33510188

RESUMO

The aim of this paper is to give an experimental evidence that point defects (most probably gallium vacancies) induce decomposition of InGaN quantum wells (QWs) at high temperatures. In the experiment performed, we implanted GaN:Si/sapphire substrates with helium ions in order to introduce a high density of point defects. Then, we grew InGaN QWs on such substrates at temperature of 730 °C, what caused elimination of most (but not all) of the implantation-induced point defects expanding the crystal lattice. The InGaN QWs were almost identical to those grown on unimplanted GaN substrates. In the next step of the experiment, we annealed samples grown on unimplanted and implanted GaN at temperatures of 900 °C, 920 °C and 940 °C for half an hour. The samples were examined using Photoluminescence, X-ray Diffraction and Transmission Electron Microscopy. We found out that the decomposition of InGaN QWs started at lower temperatures for the samples grown on the implanted GaN substrates what provides a strong experimental support that point defects play important role in InGaN decomposition at high temperatures.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA