Enhancing CO2 Capture via Metal-Ligand Cooperativity: Tuning Ligand Basicity and Zn(II) Lewis Acidity.

A series of thiosemicarbazonato-hydrazinatopyridine zinc(II) complexes were evaluated as direct air CO2 capture agents. The complexes sequester CO2 in a methanol solution as a metal-coordinated methylcarbonate. The reaction is reversible upon sparging of solutions with an inert gas (N2 or Ar). The capture process involves metal-ligand cooperativity with the noncoordinating nitrogen of the hydrazinatopyridine functional group serving as a Brønsted-Lowry base and the zinc acting as a Lewis acid. In this study, the pendent amine of the thiosemicarbazonato group was varied to include 4-phenyl (ZnL5), 4-(trifluoromethyl)phenyl (ZnL6), 4-cyanophenyl (ZnL7), 4-tolyl (ZnL8), and 4-naphthyl (ZnL9). Hyperconjugation between the pendent group and the ligand core resulted in modulation of the metal ion acidity, as quantified by ligand exchange equilibrium constants (K3 = 193-511) and ligand basicity (pKa,MeOH = 11.09-11.94). Variations in electronic structure that decreased ligand basicity were more than offset by increases in Lewis acidity. The equilibrium constant (K1) for CO2 capture varied from 46300 to 73700. Overall, the value of K1 was directly related to the relative Lewis acidity of the complexes (K3). Notably, there was an overall inverse relationship between K1 and the ligand basicity. The results provide insights into ligand design to further improve CO2 capture.

Metal-Ligand Cooperativity Promotes Reversible Capture of Dilute CO2 as a Zn(II)-Methylcarbonate.

In this study, a series of thiosemicarbazonato-hydrazinatopyridine metal complexes were evaluated as CO2 capture agents. The complexes incorporate a non-coordinating, basic hydrazinatopyridine nitrogen in close proximity to a Lewis acidic metal ion allowing for metal-ligand cooperativity. The coordination of various metal ions with (diacetyl-2-(4-methyl-thiosemicarbazone)-3-(2-hydrazinopyridine) (H2L1) yielded ML1 (M = Ni(II), Pd(II)), ML1(CH3OH) (M = Cu(II), Zn(II)), and [ML1(PPh3)2]BF4 (M = Co(III)) complexes. The ML1(CH3OH) complexes reversibly capture CO2 with equilibrium constants of 88 ± 9 and 6900 ± 180 for Cu(II) and Zn(II), respectively. Ligand effects were evaluated with Zn(II) through variation of the 4-methyl-thiosemicarbazone with 4-ethyl (H2L2), 4-phenethyl (H2L3), and 4-benzyl (H2L4) derivatives. The equilibrium constant for CO2 capture increased to 11,700 ± 300, 15,000 ± 400, and 35,000 ± 200 for ZnL2(MeOH), ZnL3(MeOH), and ZnL4(MeOH), respectively. Quantification of ligand basicity and metal ion Lewis acidity shows that changes in CO2 capture affinity are largely associated with ligand basicity upon substitution of Cu(II) with Zn(II), while variation of the thiosemicarbazone ligand enhances CO2 affinity by tuning the metal ion Lewis acidity. Overall, the Zn(II) complexes effectively capture CO2 from dilute sources with up to 90%, 86%, and 65% CO2 capture efficiency from 400, 1000, and 2500 ppm CO2 streams.

Ligand and Linkage Isomers of Bis(ethylthiocarbamato) Copper Complexes with Cyclic C6H8 Backbone Substituents: Synthesis, Characterization, and Antiproliferation Activity.

A series of isomeric bis(alkylthiocarbamate) copper complexes have been synthesized, characterized, and evaluated for antiproliferation activity. The complexes were derived from ligand isomers with 3-methylpentyl (H2L2) and cyclohexyl (H2L3) backbone substituents, which each yield a pair of linkage isomers. The thermodynamic products CuL2a/3a have two imino N and two S donors resulting in three five-member chelate rings (555 isomers). The kinetic isomers CuL2b/3b have one imino and one hydrazino N donor and two S donors resulting in four-, six-, and five-member rings (465 isomers). The 555 isomers have more accessible CuII/I potentials (E1/2 = -811/-768 mV vs. ferrocenium/ferrocene) and lower energy charge transfer bands than their 465 counterparts (E1/2 = -923/-854 mV). Antiproliferation activities were evaluated against the lung adenocarcinoma cell line (A549) and nonmalignant lung fibroblast cell line (IMR-90) using the MTT assay. CuL2a was potent (A549EC50 = 0.080 µM) and selective (IMR-90EC50/A549EC50 = 25) for A549. Its linkage isomer CuL2b had equivalent A549 activity, but lower selectivity (IMR-90EC50/A549EC50 = 12.5). The isomers CuL3a and CuL3b were less potent with A549EC50 values of 1.9 and 0.19 µM and less selective with IMR-90EC50/A549EC50 ratios of 2.3 and 2.65, respectively. There was no correlation between reduction potential and A549 antiproliferation activity/selectivity.

Ligand-Centered Hydrogen Evolution with Ni(II) and Pd(II)DMTH.

In this study, we report a pair of electrocatalysts for the hydrogen evolution reaction (HER) based on the noninnocent ligand diacetyl-2-(4-methyl-3-thiosemicarbazone)-3-(2-pyridinehydrazone) (H2DMTH, H2L1). The neutral complexes NiL1 and PdL1 were synthesized and characterized by spectroscopic and electrochemical methods. The complexes contain a non-coordinating, basic hydrazino nitrogen that is protonated during the HER. The pKa of this nitrogen was determined by spectrophotometric titration in acetonitrile to be 12.71 for NiL1 and 13.03 for PdL1. Cyclic voltammograms of both NiL1 and PdL1 in acetonitrile exhibit diffusion-controlled, reversible ligand-centered events at -1.83 and -1.79 V (vs ferrocenium/ferrocene) for NiL1 and PdL1, respectively. A quasi-reversible, ligand-centered event is observed at -2.43 and -2.34 V for NiL1 and PdL1, respectively. The HER activity in acetonitrile was evaluated using a series of neutral and cationic acids for each catalyst. Kinetic isotope effect (KIE) studies suggest that the precatalytic event observed is associated with a proton-coupled electron transfer step. The highest turnover frequency values observed were 6150 s-1 at an overpotential of 0.74 V for NiL1 and 8280 s-1 at an overpotential of 0.44 V for PdL1. Density functional theory (DFT) computations suggest both complexes follow a ligand-centered HER mechanism where the metals remain in the +2 oxidation state.

Investigations of Bis(alkylthiocarbamato)copper Linkage Isomers.

Linkage isomers are coordination compounds with the same composition but different donor atoms, resulting in distinct physical and electronic structures. A pair of linkage isomers, CuL555 and CuL465, derived from phenylglyoxal bis(ethylthiocarbamate) were synthesized, isolated, and characterized by structural, electrochemical, and spectroscopic methods. The isomers are stable in solution under ambient conditions, but CuL465 converts to CuL555 in acid, consistent with quantum-chemical calculations. The complexes were screened against a lung adenocarcinoma cell line (A549) and a nonmalignant lung fibroblast cell line (IMR-90) to evaluate the antiproliferation activity. CuL555 and CuL465 possessed EC50 values of 0.113 ± 0.030 and 0.115 ± 0.038 µM for A549 and 1.87 ± 0.29 and 0.77 ± 0.22 µM for IMR-90, respectively.

DNA-induced assembly of gold nanoprisms and polystyrene beads into 3D plasmonic SERS substrates.

The utilization of nanoparticle-polymer bead hybrid nanostructures as a SERS substrate depends on the control of the deposition, density, and distribution of nanoparticles on the bead surface. Here we demonstrate the fabrication of a large area SERS substate via a two- step DNA mediated assembly of gold nanoprisms and polystyrene (PS) beads into a large ensemble of beads that are densely coated with nanoprisms. First, nanoprisms are loaded on PS beads through DNA hybridization. The close packed arrangement of anisotropic nanoprisms in different orientations on a bead surface results in a plasmonic substrate with a variable nanogap size ranging 1-20 nm. Nanoprisms-coated beads are then assembled into a large stack or aggregate of beads using a DNA-induced crystallization approach. Each aggregate consists of 20-50 nanoprisms-coated beads, leading to the formation a large area of three-dimensional SERS substrate with a high-density of hot spots for SERS enhancement. An excellent enhancement factor (EF) of [Formula: see text] and a very high detection sensitivity (up to 10-10 M) are observed for the analysis of a probe molecule (Methylene blue) using the SERS substrate.

Solvation of NiOxfor hole transport layer deposition in perovskite solar cells.

A series of nickel oxide (NiOx) inks, in the perovskite antisolvent chlorobenzene (CB) containing 15% ethanol, were prepared for the fabrication of p-i-n perovskite solar cells by blade coating. The inks included triethylamine (Et3N) and alkyl xanthate salts as ligands to disperse NiOxparticle aggregates and stabilize suspension. A total of four inks were evaluated: 0X (Et3N with no alkyl xanthate), 4X (Et3N + potassiumn-butyl xanthate), 12X (Et3N + potassiumn-dodecyl xanthate), and 18X (Et3N + potassiumn-octadecyl xanthate). The inks were characterized by UV-visible spectroscopy and FT-IR spectroscopy and the resulting films analyzed by thermogravimetry and scanning electron microscopy. Devices prepared using the 0X ink resulted in a peak power conversion efficiency (PCE) of 14.47% (0.25 cm2) and 9.96% (1 cm2). The 0X devices showed no significant loss of PCE after 100 days in a nitrogen flow box. Devices prepared with inks containing alkyl xanthate ligand had lower PCE that decreased with decreasing chain length, 18X > 12X > 4X.

DNA-mediated hierarchical organization of gold nanoprisms into 3D aggregates and their application in surface-enhanced Raman scattering.

Colloidal crystallization using DNA provides a robust method for fabricating highly programmable nanoparticle superstructures with collective plasmonic properties. Here, we report on the DNA-guided fabrication of 3D plasmonic aggregates from polydisperse gold nanoprisms. We first construct 1D crystals via DNA-induced and shape-directed face-to-face assembly of anisotropic gold nanoprisms. Using the near-Tm thermal annealing approach that promotes long-range DNA-induced interaction and ordering, we then assemble 1D nanoprism crystals into a 3D nanoprism aggregate that exhibits a polycrystalline morphology with nanoscale ordering and microscale dimensions. The presence of closely packed nanoprism arrays over a large area gives rise to strong near-field plasmonic coupling and generates a high density of plasmonic hot spots within the 3D nanoprism aggregates that exhibit excellent surface-enhanced Raman scattering performance. The plasmonic 3D nanoprism aggregates demonstrate significant SERS enhancement (<106), and low detection limits (10-9M) with good sample-to-sample reproducibility (CV ∼ only 5.6%) for SERS analysis of the probe molecule, methylene blue. These findings highlight the potential of 3D anisotropic nanoparticle aggregates as functional plasmonic nanoarchitectures that could find applications in sensing, photonics, optoelectronics and lasing.

Exploiting Metal-Ligand Cooperativity to Sequester, Activate, and Reduce Atmospheric Carbon Dioxide with a Neutral Zinc Complex.

As atmospheric levels of carbon dioxide (CO2) continue to increase, there is an immediate need to balance the carbon cycle. Current approaches require multiple processes to fix CO2 from the atmosphere or flue gas and then reduce it to value-added products. The zinc(II) catalyst Zn(DMTH) (DMTH = diacetyl-2-(4-methyl-3-thiosemicarbazonate)-3-(2-pyridinehydrazonato)) reduces CO2 from air to formate with a faradaic efficiency of 15.1% based on total charge. The catalyst utilizes metal-ligand cooperativity and redox-active ligands to fix, activate, and reduce CO2. This approach provides a new strategy that incorporates sustainable earth-abundant metals that are oxygen and water tolerant.

Synthesis, Characterization, and Biological Activity of Hybrid Thiosemicarbazone-Alkylthiocarbamate Metal Complexes.

A series of hybrid ligands (H2L1-H2L3) derived from 4-methyl-3-thiosemicarbazide and hydrazinecarbothioic acid O-alkyl esters were synthesized and characterized by NMR. The ligands were chelated with copper (4-6), nickel (7-9), and zinc (10-12) and characterized by spectroscopy, electrochemistry, and single crystal X-ray crystallography. The chelated metals displayed substantial anodic shifts in the CuII/I reduction potential of ∼160 mV relative to their bis(thiosemicarbazone) analogues. The metal chelates 4-12 were evaluated for potential anticancer activity by MTT assays, and selected results were confirmed by clonogenic and trypan blue assays. The copper derivatives 4 and 6 were found to have potent and cancer-selective antiproliferative effects, with GI50 values less than 100 nM in A549 lung adenocarcinoma cells compared with at least 20-fold less activity in IMR90 nonmalignant lung fibroblasts. In comparison, the nickel complexes were much less active and had little cancer-selectivity. Varying by ligand, the zinc complexes were less potent or had comparable activity compared to that of the corresponding copper complex. UV-visible spectroscopy indicated that zinc complex 10 was transmetalated in the presence of equimolar copper, whereas nickel complex 7 was not. Copper complexes 4 and 6 were also assessed in the NCI60 screen and were found to have cytotoxic activity against most solid tumor cell lines. In MTT assays, 4 and 6 were substantially more active against A549 cancer cells than Cu(ATSM) and were more cancer-selective (for A549 compared to IMR-90) than Cu(GTSM). Our results suggest that hybrid thiosemicarbazone-alkylthiocarbamate copper complexes have potential for development as new anticancer agents.

Effect of Stacking Interactions on the Translation of Structurally Related Bis(thiosemicarbazonato)nickel(II) HER Catalysts to Modified Electrode Surfaces.

A series of crystalline nickel(II) complexes (1-3) based on inexpensive bis(thiosemicarbazone) ligands diacetylbis(4-methyl-3-thiosemicarbazone) (H2ATSM), diacetylbis(4,4-dimethyl-3-thiosemicarbazone) (H2ATSDM), and diacetylbis[4-(2,2,2-trifluoroethyl)-3-thiosemicarbazone] (H2ATSM-F6) were synthesized and characterized by single-crystal X-ray diffraction and NMR, UV-visible, and Fourier transform infrared spectroscopies. Modified electrodes GC-1-GC-3 were prepared with films of 1-3 deposited on glassy carbon and evaluated as potential hydrogen evolution reaction (HER) catalysts. HER studies in 0.5 M aqueous H2SO4 (10 mA cm-2) revealed dramatic shifts in the overpotential from 0.740 to 0.450 V after extended cycling for 1 and 2. The charge-transfer resistances for GC-1-GC-3 were determined to be 270, 160, and 630 Ω, respectively. Characterization of the modified surfaces for GC-1 and GC-2 by scanning electron microscopy and Raman spectroscopy revealed similar crystalline coatings before HER that changed to surface-modified crystallites after conditioning. The surface of GC-3 had an initial glasslike appearance before HER that delaminated after HER. The differences in the surface morphology and the effect of conditioning are correlated with crystal-packing effects. Complexes 1 and 2 pack as columns of interacting complexes in the crystallographic a direction with short interplanar spacings between 3.37 and 3.54 Å. Complex 3 packs as columns of isolated molecules in the crystallographic b direction with long-range interplanar spacings of 9.40 Å.

Utilizing Charge Effects and Minimizing Intramolecular Proton Rearrangement to Improve the Overpotential of a Thiosemicarbazonato Zinc HER Catalyst.

The zinc(II) complex of diacetyl-2-(4-methyl-3-thiosemicarbazone)-3-(2-hydrazonepyridine), ZnL1 (1), was prepared and evaluated as a precatalyst for the hydrogen evolution reaction (HER) under homogeneous conditions in acetonitrile. Complex 1 is protonated on the noncoordinating nitrogen of the hydrazonepyridine moiety to yield the active catalyst Zn(HL1)OAc (2) upon addition of acetic acid. Addition of methyl iodide to 1 yields the corresponding methylated derivative ZnL2I (3). In solution, partial dissociation of the coordinated iodide yields the cationic derivative 3'. Complexes 1-3 were characterized by 1H NMR, FT-IR, and UV-visible spectroscopies. The solid-state structures of 2 and 3 were determined by single crystal X-ray diffraction. HER studies conducted in acetonitrile with acetic acid as the proton source yield a turnover frequency (TOF) of 7700 s-1 for solutions of 1 at an overpotential of 1.27 V and a TOF of 6700 s-1 for solutions of 3 at an overpotential of 0.56 V. For both complexes, the required potential for catalysis, Ecat/2, is larger than the thermodynamic reduction potential, E1/2, indicative of a kinetic barrier attributed to intramolecular proton rearrangement. The effect is larger for solutions of 1 (+440 mV) than for solutions of 3 (+160 mV). Controlled potential coulometry studies were used to determine faradaic efficiencies of 71 and 89% for solutions of 1 and 3, respectively. For both catalysts, extensive cycling of potential under catalytic conditions results in the deposition of a film on the glassy carbon electrode surface that is active as an HER catalyst. Analysis of the film of 3 by X-ray photoelectron spectroscopy indicates the complex remains intact upon deposition. A proposed ligand-centered HER mechanism with 1 as a precatalyst to 2 is supported computationally using density functional theory (DFT). All catalytic intermediates in the mechanism were structurally and energetically characterized with the DFT/B3LYP/6-311g(d,p) in solution phase using a polarizable continuum model (PCM). The thermodynamic feasibility of the mechanism is supported by calculation of equilibrium constants or reduction potentials for each proposed step.

Ligand-Assisted Metal-Centered Electrocatalytic Hydrogen Evolution upon Reduction of a Bis(thiosemicarbazonato)Ni(II) Complex.

In this study, we report the electrocatalytic behavior of the neutral, monomeric Ni(II) complex of diacetyl-bis( N-4-methyl-3-thiosemicarbazonato), NiL1, for ligand-assisted metal-centered hydrogen evolution in acetonitrile (ACN) and dimethylformamide (DMF). Using foot-of-the-wave analysis (FOWA), NiL1 displays a maximum turnover frequency (TOF) of 4200 and 1200 s-1 for acetic acid (CH3COOH) in ACN and DMF, whereas for trifluoroacetic acid (CF3COOH) the TOFs are 1300 and 120 s-1 in ACN and DMF, respectively. In ACN, the overpotentials are 0.53 and 0.67 V for CH3COOH and CF3COOH, respectively. In DMF, the overpotential is 0.85 V for CH3COOH. First-order dependence with respect to the catalyst is established. NiL1 displays a minimum Faradaic efficiency of 87% from controlled potential electrolysis. Gas analysis from controlled potential electrolysis in both ACN and DMF using CH3COOH and CF3COOH confirms NiL1 as an electrocatalyst to produce H2. In ACN, TONs of 48 and 24 were obtained for CH3COOH and CF3COOH, respectively in 4 h. In DMF, TONs of 13 and 3 were obtained for CH3COOH and CF3COOH, respectively. The H2 evolution reaction was evaluated using deuterated acid, demonstrating an inverse kinetic isotope, which is consistent with formation of a metal hydride intermediate. A proposed ligand-assisted metal-centered mechanism for HER is supported by computational investigations. All catalytic intermediates in the proposed mechanism were structurally and energetically characterized using density functional theory (DFT), with the B3LYP/6-311g(d,p) and BP86/TZV/P in solution modeled via polarizable continuum model. The final step of catalysis involves the reaction of [HNi(L1·)]- with H+ generating H2. The correctness of proposed mechanism was confirmed by location of corresponding transition state (TS) having single imaginary frequency ( i1786 cm-1).

Metal-Assisted Ligand-Centered Electrocatalytic Hydrogen Evolution upon Reduction of a Bis(thiosemicarbazonato)Cu(II) Complex.

In this study, we report the electrocatalytic behavior of the neutral, monomeric Cu(II) complex of diacetyl-bis(N-4-methyl-3-thiosemicarbazonato), CuL1, for metal-assisted ligand-centered hydrogen evolution in acetonitrile and dimethylformamide. CuL1 displays a maximum turnover frequency (TOF) of 10 000 s-1 in acetonitrile and 5100 s-1 in dimethylformamide at an overpotential of 0.80 and 0.76 V, respectively. The rate law is first-order in catalyst and second-order in proton concentration. Gas analysis from controlled potential electrolysis confirms CuL1 as an electrocatalyst to produce H2 with a minimum Faradaic efficiency of 81% and turnover numbers as high as 73 while showing no sign of degradation over 23 h. The H2 evolution reaction (HER) was probed using deuterated acid, demonstrating a kinetic isotope effect of 7.54. A proton inventory study suggests one proton is involved in the rate-determining step. Catalytic intermediates were identified using 1H NMR, X-ray photoelectron, and UV-visible spectroscopies. All catalytic intermediates in the proposed mechanism were successfully optimized using density functional theory calculations with the B3LYP functional and the 6-311g(d,p) basis set and support the proposed mechanism.

Translation of Ligand-Centered Hydrogen Evolution Reaction Activity and Mechanism of a Rhenium-Thiolate from Solution to Modified Electrodes: A Combined Experimental and Density Functional Theory Study.

The homogeneous, nonaqueous catalytic activity of the rhenium-thiolate complex ReL3 (L = diphenylphosphinobenzenethiolate) for the hydrogen evolution reaction (HER) has been transferred from nonaqueous homogeneous to aqueous heterogeneous conditions by immobilization on a glassy carbon electrode surface. A series of modified electrodes based on ReL3 and its oxidized precursor [ReL3][PF6] were fabricated by drop-cast methods, yielding catalytically active species with HER overpotentials for a current density of 10 mA/cm2, ranging from 357 to 919 mV. The overpotential correlates with film resistance as measured by electrochemical impedance spectroscopy and film morphology as determined by scanning and transmission electron microscopy. The lowest overpotential was for films based on the ionic [ReL3][PF6] precursor with the inclusion of carbon black. Stability measurements indicate a 2 to 3 h conditioning period in which the overpotential increases, after which no change in activity is observed within 24 h or upon reimmersion in fresh aqueous, acidic solution. Electronic spectroscopy results are consistent with ReL3 as the active species on the electrode surface; however, the presence of an undetected quantity of catalytically active degradation species cannot be excluded. The HER mechanism was evaluated by Tafel slope analysis, which is consistent with a novel Volmer-Heyrovsky-Tafel-like mechanism that parallels the proposed homogeneous HER pathway. Proposed mechanisms involving traditional metal-hydride processes vs ligand-centered reactivity were examined by density functional theory, including identification and characterization of relevant transition states. The ligand-centered path is energetically favored with protonation of cis-sulfur sites culminating in homolytic S-H bond cleavage with H2 evolution via H atom coupling.

Beyond Metal-Hydrides: Non-Transition-Metal and Metal-Free Ligand-Centered Electrocatalytic Hydrogen Evolution and Hydrogen Oxidation.

A new pathway for homogeneous electrocatalytic H2 evolution and H2 oxidation has been developed using a redox active thiosemicarbazone and its zinc complex as seminal metal-free and transition-metal-free examples. Diacetyl-bis(N-4-methyl-3-thiosemicarbazone) and zinc diacetyl-bis(N-4-methyl-3-thiosemicarbazide) display the highest reported TOFs of any homogeneous ligand-centered H2 evolution catalyst, 1320 and 1170 s(-1), respectively, while the zinc complex also displays one of the highest reported TOF values for H2 oxidation, 72 s(-1), of any homogeneous catalyst. Catalysis proceeds via ligand-centered proton-transfer and electron-transfer events while avoiding traditional metal-hydride intermediates. The unique mechanism is consistent with electrochemical results and is further supported by density functional theory. The results identify a new direction for the design of electrocatalysts for H2 evolution and H2 oxidation that are not reliant on metal-hydride intermediates.

Proposed Ligand-Centered Electrocatalytic Hydrogen Evolution and Hydrogen Oxidation at a Noninnocent Mononuclear Metal-Thiolate.

The noninnocent coordinatively saturated mononuclear metal-thiolate complex ReL3 (L = diphenylphosphinobenzenethiolate) serves as an electrocatalyst for hydrogen evolution or hydrogen oxidation dependent on the presence of acid or base and the applied potential. ReL3 reduces acids to H2 in dichloromethane with an overpotential of 380 mV and a turnover frequency of 32 ± 3 s(-1). The rate law displays a second-order dependence on acid concentration and a first-order dependence on catalyst concentration with an overall third-order rate constant (k) of 184 ± 2 M(-2) s(-1). Reactions with deuterated acid display a kinetic isotope effect of 9 ± 1. In the presence of base, ReL3 oxidizes H2 with a turnover frequency of 4 ± 1 s(-1). The X-ray crystal structure of the monoprotonated species [Re(LH)L2](+), an intermediate in both catalytic H2 evolution and oxidation, has been determined. A ligand-centered mechanism, which does not require metal hydride intermediates, is suggested based on similarities to the redox-regulated, ligand-centered binding of ethylene to ReL3.

Kinetic effects of sulfur oxidation on catalytic nitrile hydration: nitrile hydratase insights from bioinspired ruthenium(II) complexes.

Kinetic investigations inspired by the metalloenzyme nitrile hydratase were performed on a series of ruthenium(II) complexes to determine the effect of sulfur oxidation on catalytic nitrile hydration. The rate of benzonitrile hydration was quantified as a function of catalyst, nitrile, and water concentrations. Precatalysts L(n)RuPPh3 (n = 1-3; L(1) = 4,7-bis(2'-methyl-2'-mercapto-propyl)-1-thia-4,7-diazacyclononane; L(2) = 4-(2'-methyl-2'-sulfinatopropyl)-7-(2'-methyl-2'-mercapto-propyl)-1-thia-4,7-diazacyclononane; L(3) = 4-(2'-methyl-2'-sulfinatopropyl)-7-(2'-methyl-2'-sulfenato-propyl)-1-thia-4,7-diazacyclononane) were activated by substitution of triphenylphosphine with substrate in hot dimethylformamide solution. Rate measurements are consistent with a dynamic equilibrium between inactive aqua (L(n)Ru-OH2) and active nitrile (L(n)Ru-NCR) derivatives with K = 21 ± 1, 9 ± 0.9, and 23 ± 3 for L(1) to L(3), respectively. Subsequent hydration of the L(n)Ru-NCR intermediate yields the amide product with measured hydration rate constants (k's) of 0.37 ± 0.01, 0.82 ± 0.07, and 1.59 ± 0.12 M(-1) h(-1) for L(1) to L(3), respectively. Temperature dependent studies reveal that sulfur oxidation lowers the enthalpic barrier by 27 kJ/mol, but increases the entropic barrier by 65 J/(mol K). Density functional theory (DFT) calculations (B3LYP/LanL2DZ (Ru); 6-31G(d) (all other atoms)) support a nitrile bound catalytic cycle with lowering of the reaction barrier as a consequence of sulfur oxidation through enhanced nitrile binding and attack of the water nucleophile through a highly organized transition state.

Two-Membrane Dual Non-Aqueous/Aqueous Electrolyte Flow Cell Operation for Electrochemical Conversion of CO2 to Methyl Formate.

Recently, tandem cathodic reactions have been demonstrated in non-aqueous solvents to couple CO2 reduction to a secondary reaction to create novel species that are not produced in aqueous CO2 electrolysis. One reaction that can be performed with high selectivity and durability is the electrochemical conversion of CO2 to formic acid and in-situ esterification with methanol to produce methyl formate. However, the translation to a high-performance flow electrolyzer is far from trivial, as the non-aqueous catholyte leads to reactor challenges including flooding the gas diffusion electrode. Here, a two-membrane flow electrolyzer with both anion and cation exchange membranes was used with flowing methanol catholyte and aqueous anolyte. This design prevented methanol from flooding the cathode, which was a pervasive limiting issue for electrolyzers with a single membrane. Methyl formate production at 42.9 % faradaic efficiency was achieved with pure methanol in a flow electrolyzer with stable performance beyond 80 min. However, low-water-content catholyte compositions also led to increased cell resistance and lower operating current densities. Thus, with the present ionomer materials there is a tradeoff between methyl formate selectivity and current density depending on water concentration, highlighting a need for new ionomers tailored for desirable non-aqueous solvents such as methanol.

Investigating BioCaRGOS, a Sol-Gel Matrix for the Stability of Heme Proteins under Enzymatic Degradation and Low pH.

There have been significant advances in the development of vaccines for the prevention of various infectious diseases in the last few decades. These vaccines are mainly composed of proteins and nucleic acids. Poor handling and storage, exposure to high temperatures that lead to enzymatic degradation, pH variation, and various other stresses can denature the proteins or nucleic acids present in any vaccine formulation. Therefore, it is necessary to maintain a proper environment to preserve the integrity of biospecimens. To overcome these challenges, we report a practical and user-friendly approach for sol-gels called "BioCaRGOS" that can stabilize heme proteins not only in the presence of degrading enzymes and acidic pH but simultaneously maintain stability at room temperature. Heme proteins, such as myoglobin and cytochrome c, have been used for this study.