RESUMO
The Montreal Protocol is successfully protecting the ozone layer. The main halogen gases responsible for stratospheric ozone depletion have been regulated under the Protocol, their combined atmospheric abundances are declining and ozone is increasing in some parts of the atmosphere1. Ozone depletion potentials2-4, relative measures of compounds' abilities to deplete stratospheric ozone, have been a key regulatory component of the Protocol in successfully guiding the phasing out in the manufacture of the most highly depleting substances. However, this latest, recovery phase in monitoring the success of the Protocol calls for further metrics. The 'delay in ozone return' has been widely used to indicate the effect of different emissions or phase-down strategies, but we argue here that it can sometimes be ambiguous or even of no use. Instead, we propose the use of an integrated ozone depletion (IOD) metric to indicate the impact of any new emission. The IOD measures the time-integrated column ozone depletion and depends only on the emission strength and the whole atmosphere and stratospheric lifetimes of the species considered. It provides a useful complementary metric of the impact of specific emissions of an ozone depleting substance for both the scientific and policy communities.
RESUMO
The 1257 CE eruption of Mount Samalas (Indonesia) is the source of the largest stratospheric injection of volcanic gases in the Common Era. Sulfur dioxide emissions produced sulfate aerosols that cooled Earth's climate with a range of impacts on society. The coemission of halogenated species has also been speculated to have led to wide-scale ozone depletion. Here we present simulations from HadGEM3-ES, a fully coupled Earth system model, with interactive atmospheric chemistry and a microphysical treatment of sulfate aerosol, used to assess the chemical and climate impacts from the injection of sulfur and halogen species into the stratosphere as a result of the Mt. Samalas eruption. While our model simulations support a surface air temperature response to the eruption of the order of -1°C, performing well against multiple reconstructions of surface temperature from tree-ring records, we find little evidence to support significant injections of halogens into the stratosphere. Including modest fractions of the halogen emissions reported from Mt. Samalas leads to significant impacts on the composition of the atmosphere and on surface temperature. As little as 20% of the halogen inventory from Mt. Samalas reaching the stratosphere would result in catastrophic ozone depletion, extending the surface cooling caused by the eruption. However, based on available proxy records of surface temperature changes, our model results support only very minor fractions (1%) of the halogen inventory reaching the stratosphere and suggest that further constraints are needed to fully resolve the issue.
RESUMO
In this study, we show using a state-of-the-art Earth system model, UKESM1, that emissions and climate scenario depending, there could be large changes in surface ozone by the end of the twenty-first century, with unprecedentedly large increases over South and East Asia. We also show that statistical modelling of the trends in future ozone works well in reproducing the model output between 1900 and 2050. However, beyond 2050, and especially under large climate change scenarios, the statistical model results are in poorer agreement with the fully interactive Earth system model output. This suggests that additional processes occurring in the Earth system model such as changes in the production of ozone at higher temperatures or changes in the influx of ozone from the stratosphere, which are not captured by the statistical model, have a first order impact on the evolution of surface ozone over the twenty-first century. We show in a series of idealized box model simulations, with two different chemical schemes, that changes in temperature lead to diverging responses between the schemes. This points at the chemical mechanisms as being a source of uncertainty in the response of ozone to changes in temperature, and so climate, in the future. This underscores the need for more work to be performed to better understand the response of ozone to changes in temperature and constrain how well this relationship is simulated in models. This article is part of a discussion meeting issue 'Air quality, past present and future'.
RESUMO
Large-scale epidemiological studies have shown a close correlation between adverse human health effects and exposure to ambient particulate matter (PM). The oxidative potential (OP) of ambient PM has been implicated in inducing toxic effects associated with PM exposure. In particular, reactive oxygen species (ROS), either bound to PM or generated by particulate components in vivo, substantially contribute to the OP and therefore toxicity of PM by lowering antioxidant concentrations in the lung, which can subsequently lead to oxidative stress, inflammation, and disease. Traditional methods for measuring aerosol OP are labor intensive and have poor time resolution, with significant delays between aerosol collection and ROS analysis. These methods may underestimate ROS concentrations in PM because of the potentially short lifetime of some ROS species; therefore, continuous online, highly time-resolved measurement of ROS components in PM is highly advantageous. In this work, we develop a novel online method for measuring aerosol OP based on ascorbic acid chemistry, an antioxidant prevalent in the lung, thus combining the advantages of continuous online measurement with a physiologically relevant assay. The method limit of detection is estimated for a range of atmospherically important chemical components such as Cu(II) 0.22 ± 0.03 µg m-3, Fe(II) 47.8 ± 5.5 µg m-3, Fe(III) 0.63 ± 0.05 µg m-3, and secondary organic aerosol 41.2 ± 6.9 µg m-3, demonstrating that even at this early stage of development, the online method is capable of measuring the OP of PM in polluted urban environments and smog chamber studies.
Assuntos
Aerossóis/análise , Ácido Ascórbico/química , Técnicas Eletroquímicas/métodos , Aerossóis/química , Monoterpenos Bicíclicos/química , Cobre/análise , Cobre/química , Ácido Desidroascórbico/análise , Ácido Desidroascórbico/química , Corantes Fluorescentes/química , Ferro/análise , Ferro/química , Limite de Detecção , Oxirredução , Material Particulado/análise , Material Particulado/química , Fenilenodiaminas/química , Espécies Reativas de Oxigênio/químicaRESUMO
The interaction between atmospheric aerosol particles and water vapor influences aerosol size, phase, and composition, parameters which critically influence their impacts in the atmosphere. Methods to accurately measure aerosol water uptake for a wide range of particle types are therefore merited. We present here a new method for characterizing aerosol hygroscopicity, an impaction stage containing a microelectromechanical systems (MEMS) microresonator. We find that deliquescence and efflorescence relative humidities (RHs) of sodium chloride and ammonium sulfate are easily diagnosed via changes in resonant frequency and peak sharpness. These agree well with literature values and thermodynamic models. Furthermore, we demonstrate that, unlike other resonator-based techniques, full hygroscopic growth curves can be derived, including for an inorganic-organic mixture (sodium chloride and malonic acid) which remains liquid at all RHs. The response of the microresonator frequency to temperature and particle mechanical properties and the resulting limitations when measuring hygroscopicity are discussed. MEMS resonators show great potential as miniaturized ambient aerosol mass monitors, and future work will consider the applicability of our approach to complex ambient samples. The technique also offers an alternative to established methods for accurate thermodynamic measurements in the laboratory.
RESUMO
The uptake of gaseous ethanol, 1,1,1-trifluoroethanol, acetone, chloral (CCl(3)CHO), and fluoral (CF(3)CHO) on ice films has been investigated using a coated-wall flow tube at temperatures 208-228 K corresponding to the upper troposphere (UT), with a mass spectrometric measurement of gas concentration. The uptake was largely reversible and followed Langmuir-type kinetic behavior, i.e., surface coverage increased with the trace gas concentration approaching a maximum surface coverage at a gas phase concentration of N(max) â¼ (2-4) × 10(14) molecules cm(-3), corresponding to a surface coverage of â¼30% of a monolayer (ML). The equilibrium partition coefficients, K(LinC), were obtained from the experimental data by analysis using the simple Langmuir model for specific conditions of temperature and concentration. The analysis showed that the K(LinC) depend only weakly on surface coverages. The following expressions described the temperature dependence of the partition coefficients (K(LinC)) in centimeters, at low coverage for ethanol, trifluoroethanol, acetone, chloral, and fluoral: K(LinC) = 1.36 × 10(-11) exp(5573.5/T), K(LinC) = 3.74 × 10(-12) exp(6427/T), K(LinC) = 3.04 × 10(-9) exp(4625/T), K(LinC) = 7.52 × 10(-4) exp(2069/T), and K(LinC) = 1.06 × 10(-2) exp(904/T). For acetone and ethanol the enthalpies and entropies of adsorption derived from all available data showed systematic temperature dependence, which is attributed to temperature dependent surface modifications, e.g., QLL formation. For chloral and fluoral, there was an irreversible component of uptake, which was attributed to hydrate formation on the surface. Rate constants for these surface reactions derived using a Langmuir-Hinshelwood mechanism are reported.
Assuntos
Acetaldeído/análogos & derivados , Acetona/química , Hidrato de Cloral/análogos & derivados , Etanol/química , Gelo , Temperatura , Acetaldeído/química , Adsorção , Atmosfera/química , Hidrato de Cloral/química , Etanol/análogos & derivados , Hidrólise , Propriedades de SuperfícieRESUMO
Ascorbic acid is among the most abundant antioxidants in the lung, where it likely plays a key role in the mechanism by which particulate air pollution initiates a biological response. Because ascorbic acid is a highly redox active species, it engages in a far more complex web of reactions than a typical organic molecule, reacting with oxidants such as the hydroxyl radical as well as redox-active transition metals such as iron and copper. The literature provides a solid outline for this chemistry, but there are large disagreements about mechanisms, stoichiometries and reaction rates, particularly for the transition metal reactions. Here we synthesize the literature, develop a chemical kinetics model, and use seven sets of laboratory measurements to constrain mechanisms for the iron and copper reactions and derive key rate constants. We find that micromolar concentrations of iron(III) and copper(II) are more important sinks for ascorbic acid (both AH2 and AH-) than reactive oxygen species. The iron and copper reactions are catalytic rather than redox reactions, and have unit stoichiometries: Fe(III)/Cu(II) + AH2/AH- + O2 â Fe(III)/Cu(II) + H2O2 + products. Rate constants are 5.7 × 104 and 4.7 × 104 M-2 s-1 for Fe(III) + AH2/AH- and 7.7 × 104 and 2.8 × 106 M-2 s-1 for Cu(II) + AH2/AH-, respectively.
RESUMO
We describe a newly constructed electrodynamic balance with which to measure the relative mass of single aerosol particles at varying relative humidity. Measurements of changing mass with respect to the relative humidity allow mass (m) growth factors (m(aqueous)/m(dry)) and diameter (d) growth factors (d(aqueous)/d(dry)) of the aerosol to be determined. Four aerosol types were investigated: malonic acid, glutaric acid, mixtures of malonic acid and sodium chloride, and mixtures of glutaric acid and sodium chloride. The mass growth factors of the malonic acid and glutaric acid aqueous phase aerosols, at 85% relative humidity, were 2.11 +/- 0.08 and 1.73 +/- 0.19, respectively. The mass growth factors of the mixed organic/inorganic aerosols are dependent upon the molar fraction of the individual components. Results are compared with previous laboratory determinations and theoretical predictions.
Assuntos
Aerossóis/química , Glutaratos/química , Malonatos/química , Cloreto de Sódio/química , Tamanho da Partícula , MolhabilidadeRESUMO
The vapor pressures of two dicarboxylic acids, malonic acid and glutaric acid, are determined by the measurement of the evaporation rate of the dicarboxylic acids from single levitated particles. Two laboratory methods were used to isolate single particles, an electrodynamic balance and optical tweezers (glutaric acid only). The declining sizes of individual aerosol particles over time were followed using elastic Mie scattering or cavity enhanced Raman scattering. Experiments were conducted over the temperature range of 280-304 K and a range of relative humidities. The subcooled liquid vapor pressures of malonic and glutaric acid at 298.15 K were found to be 6.7(-1.2)(+2.6) x 10(-4) and 11.2(-4.7)(+9.6) x 10(-4) Pa, respectively, and the standard enthalpies of vaporization were respectively 141.9 ± 19.9 and 100.8 ± 23.9 kJ mol(-1). The vapor pressures of both glutaric acid and malonic acid in single particles composed of mixed inorganic/organic composition were found to be independent of salt concentration within the uncertainty of the measurements. Results are compared with previous laboratory determinations and theoretical predictions.
Assuntos
Glutaratos/química , Malonatos/química , Cloreto de Sódio/química , Pressão de Vapor , Aerossóis/química , Tamanho da Partícula , Análise Espectral RamanRESUMO
Reactive uptake coefficients for loss of N(2)O(5) to micron-size aerosols containing oxalic malonic, succinic, and glutaric acids, and mixtures with ammonium hydrogen sulfate and ammonium sulfate, are presented. The uptake measurements were made using two different systems: atmospheric pressure laminar flow tube reactor (Cambridge) and the Large Indoor Aerosol Chamber at Forschungszentrum Juelich. Generally good agreement is observed for the data recorded using the two techniques. Measured uptake coefficients lie in the range 5 x 10(-4)-3 x 10(-2), dependent on relative humidity, on particle phase, and on particle composition. Uptake to solid particles is generally slow, with observed uptake coefficients less than 1 x 10(-3), while uptake to liquid particles is around an order of magnitude more efficient. These results are rationalized using a numerical model employing explicit treatment of both transport and chemistry. Our results indicate a modest effect of the dicarboxylic acids on uptake and confirm the strong effect of particle phase, liquid water content, and particulate nitrate concentrations.
Assuntos
Ácidos Dicarboxílicos/química , Nitratos/química , Óxidos de Nitrogênio/química , Aerossóis/química , Tamanho da Partícula , Sulfatos/químicaRESUMO
TiO2, a component of atmospheric mineral aerosol, catalyses the reduction of NO2 to nitrous acid (HONO) when present as an aerosol and illuminated with near UV light under conditions pertinent to the troposphere.
RESUMO
Hydrogen peroxide (H(2)O(2)) is an important atmospheric oxidant that can serve as a sensitive indicator for HO(x) (OH + HO(2)) chemistry. We report the first direct experimental determination of the uptake coefficient for the heterogeneous reaction of gas-phase hydrogen peroxide (H(2)O(2)) with titanium dioxide (TiO(2)), an important component of atmospheric mineral dust aerosol particles. The kinetics of H(2)O(2) uptake on TiO(2) surfaces were investigated using an entrained aerosol flow tube (AFT) coupled with a chemical ionization mass spectrometer (CIMS). Uptake coefficients (gamma(H(2)O(2))) were measured as a function of relative humidity (RH) and ranged from 1.53 x 10(-3) at 15% RH to 5.04 x 10(-4) at 70% RH. The observed negative correlation of RH with gamma(H(2)O(2)) suggests that gaseous water competes with gaseous H(2)O(2) for adsorption sites on the TiO(2) surface. These results imply that water vapor plays a major role in the heterogeneous loss of H(2)O(2) to submicrometer TiO(2) aerosol. The results are compared with related experimental observations and assessed in terms of their potential impact on atmospheric modeling studies of mineral dust and its effect on the heterogeneous chemistry in the atmosphere.
Assuntos
Aerossóis/química , Peróxido de Hidrogênio/química , Titânio/química , Monitoramento Ambiental , UmidadeRESUMO
The kinetics of reactive uptake of N2O5 on submicron aerosol particles containing humic acid and ammonium sulfate has been investigated as a function of relative humidity (RH) and aerosol composition using a laminar flow reactor coupled with a differential mobility analyzer (DMA) to characterize the aerosol. For single-component humic acid aerosol the uptake coefficient, gamma, was found to increase from 2 to 9 x 10(-4) over the range 25-75% RH. These values are 1-2 orders of magnitude below those typically observed for single-component sulfate aerosols (Phys. Chem. Chem. Phys. 2003, 5, 3453-3463;(1) Atmos. Environ. 2000, 34, 2131-2159(2)). For the mixed aerosols, gamma was found to decrease with increasing humic acid mass fraction and increase with increasing RH. For aerosols containing only 6% humic acid by dry mass, a decrease in reactivity of more than a factor of 2 was observed compared with the case for single-component ammonium sulfate. The concentration of liquid water in the aerosol droplets was calculated using the aerosol inorganic model (for the ammonium sulfate component) and a new combined FTIR-DMA system (for the humic acid component). Analysis of the uptake coefficients using the water concentration data shows that the change in reactivity cannot be explained by the change in water content alone. We suggest that, due to its surfactant properties, the main effect of the humic acid is to reduce the mass accommodation coefficient for N2O5 at the aerosol particle surface. This has implications for the use of particle hygroscopicity data for predictions of the rate of N2O5 hydrolysis.