Synthesis of Technetium Carboxylates: Wheel-Like Octanuclear Clusters (Tc8(µ-O)8(RCOO)16, Where R = CF3, C6H5)─Potential Nanobuilding Units for Tc-MOFs.

Herein, we studied the behavior of TcO4- in trifluoroacetic anhydride (TFAA) under visible light irradiation in situ by UV-vis spectroscopy. One carboxylate of Tc(VII) C2F3O5Tc (1) and two wheel-like carboxylate clusters of Tc(IV) Tc8(µ-O)8(CF3COO)16 (2, 3) and Tc8(µ-O)8(C6H5COO)16 (4) were synthesized and analyzed using pXRD, TGA, UV-vis spectroscopy, and SCXRD techniques. According to SCXRD, it was found that Tc(IV) trifluoroacetate exists in two crystalline modifications. By UV-vis spectroscopy and DFT calculations, it was shown that the primary compound in the reaction system is trifluoroacetate Tc(VII). A technetium trifluoroacetate(VII) and Tc intermediates of unidentified nature both show photosensitivity. The influence of intermolecular noncovalent interactions on the volatility of trifluoroacetate and benzoate Tc(IV) is shown. The main regularities of chemical transformations of technetium in nonaqueous solutions of carboxylates have been revealed. The obtained data on the kinetics of the process suggest that technetium in trifluoroacetic anhydride can simultaneously exist in the form of Tc(VII), Tc(VI), Tc(V), and Tc(IV). Under laser ionization or prolonged heating, the formation of the Tc(II,III)-cluster is observed.

Application of the intramolecular Diels-Alder vinylarene (IMDAV) reaction for the synthesis of benzo-, carbocyclo-, thienothiopheneisoindolecarboxylic acids and its limitations.

Thienylallylamines, readily accessible from the corresponding thienyl aldehydes, react with maleic and trifluoromethylmaleic anhydrides leading to the formation of acids with a thieno[2,3-f]isoindole core. The reaction sequence involves two successive steps: acylation of the nitrogen atom of the initial allylamine and the intramolecular Diels-Alder vinylarene (IMDAV) reaction. The scope and limitations of the proposed method were thoroughly investigated. It has been revealed with the aid of X-ray analysis and DFT calculations that the key step, the IMDAV reaction, proceeds through an exo-transition state, giving rise to the exclusive formation of a single diastereomer of the target heterocycle. The obtained functionally substituted thieno[2,3-f]isoindole carboxylic acids are potentially useful substrates for further transformations and bioscreening. The antimicrobial evaluation of the obtained compounds revealed that 1-oxo-2-(3-(trifluoromethyl)phenyl)hexahydrobenzo[4,5]thieno[2,3-f]isoindole-10-carboxylic acid is the most active sample in the synthesized library. It exhibits antibacterial activity against sensitive strains of Gram-positive bacteria, including S. aureus, Enterococcus faecium, Bacillus cereus, and Micrococcus luteus, as well as the Gram-negative bacteria E. coli and Pseudomonas fluorescens, with MIC values ranging from 4 to 64 µg mL-1. 9-Oxo-8-phenyloctahydronaphtho[2,1-d]thieno[2,3-f]isoindole-10-carboxylic acid showed antifungal activity against yeast culture C. albicans with a MIC value of 32 µM.

Crystal structure of [1,3-bis-(2,4,6-tri-methyl-phen-yl)imidazolidin-2-yl-idene]di-chlorido-(2-{[(2-methoxyeth-yl)(meth-yl)amino]-meth-yl}benzyl-idene)ruth-en-ium.

The title compound, [RuCl2(C33H43N3O)], is an example of a new generation of N,N-dialkyl ruthenium catalysts with an N-Ru coordination bond as part of a six-membered chelate ring. The Ru atom has an Addison τ parameter of 0.244, which indicates a geometry inter-mediate between square-based pyramidal and trigonal-bipyramidal. The complex shows the usual trans arrangement of the two chlorides, with Ru-Cl bond lengths of 2.3515 (8) and 2.379 (7) Å, and a Cl-Ru-Cl angle of 158.02 (3)°. One of the chlorine atoms and the atoms of the 2-meth-oxy-N-methyl-N-[(2-methyl-phen-yl)meth-yl]ethane-1-amine group of the title complex display disorder over two positions in a 0.889 (2): 0.111 (2) ratio.

Crystal structure and Hirshfeld surface analysis of (Z)-4-({[2-(benzo[b]thio-phen-3-yl)cyclo-pent-1-en-1-yl]meth-yl}(phen-yl)amino)-4-oxobut-2-enoic acid.

In the title compound, C24H21NO3S, the cyclopentene ring adopts an envelope conformation. In the crystal, mol-ecules are linked by C-H⋯π inter-actions, forming ribbons along the a axis. Inter-molecular C-H⋯O hydrogen bonds connect these ribbons to each other, forming layers parallel to the (01) plane. The mol-ecular packing is strengthened by van der Waals inter-actions between the layers. The inter-molecular contacts were qu-anti-fied using Hirshfeld surface analysis and two-dimensional fingerprint plots, revealing the relative contributions of the contacts to the crystal packing to be H⋯H 46.0%, C⋯H/H⋯C 21.1%, O⋯H/H⋯O 20.6% and S⋯H/H⋯S 9.0%.

Crystal structure and Hirshfeld surface analysis of (Z)-4-oxo-4-{phen-yl[(thio-phen-2-yl)meth-yl]amino}-but-2-enoic acid.

In the title compound, C15H13NO3S, the mol-ecular conformation is stable with the intra-molecular O-H⋯O hydrogen bond forming a S(7) ring motif. In the crystal, mol-ecules are connected by C-H⋯O hydrogen bonds, forming C(8) chains running along the a-axis direction. Cohesion of the packing is provided by weak van der Waals inter-actions between the chains. A Hirshfeld surface analysis was undertaken to investigate and qu-antify the inter-molecular inter-actions. The thio-phene ring is disordered in a 0.9466 (17):0.0534 (17) ratio over two positions rotated by 180°.

Crystal structure and Hirshfeld surface analysis of 1-[6-bromo-2-(4-fluoro-phen-yl)-1,2,3,4-tetra-hydroquinolin-4-yl]pyrrolidin-2-one.

In the title compound, C19H18BrFN2O, the pyrrolidine ring adopts an envelope conformation. In the crystal, mol-ecules are linked by inter-molecular N-H⋯O, C-H⋯O, C-H⋯F and C-H⋯Br hydrogen bonds, forming a three-dimensional network. In addition, C-H⋯π inter-actions connect mol-ecules into ribbons along the b-axis direction, consolidating the mol-ecular packing. The inter-molecular inter-actions in the crystal structure were qu-anti-fied and analysed using Hirshfeld surface analysis.

Crystal structure and Hirshfeld surface analysis of 10-hy-droxy-2-(4-meth-oxy-phen-yl)-3-oxo-2,3,3a,4,10,10a-hexa-hydro-1H-9-thia-2-aza-cyclo-penta-[b]fluorene-4-carb-oxy-lic acid dimethyl sulfoxide-d6 monosolvate.

In the title compound, C22H19NO5S·C2D6OS, the central six-membered ring has a slightly distorted boat conformation, while the fused pyrrolidine ring adopts an envelope conformation. These conformations are stabilized by O-H⋯O hydrogen bonds between the main compound and solvent mol-ecules. In addition, intra-molecular C-H⋯O hydrogen bonds in the main mol-ecule form two S(6) rings. Mol-ecules are connected by pairs of inter-molecular C-H⋯O hydrogen bonds, forming dimers with a R 2 2(8) motif. These dimers form a three-dimensional network through O-H⋯O, O-H⋯S and C-H⋯O hydrogen bonds with each other directly and through solvent mol-ecules. In addition, weak π-π stacking inter-actions [centroid-to-centroid distances = 3.9937 (10) and 3.9936 (10) Å, slippages of 2.034 and 1.681 Å] are observed. The inter-molecular contacts were qu-anti-fied using Hirshfeld surface analysis and two-dimensional fingerprint plots, revealing the relative contributions of the contacts to the crystal packing to be H⋯H 41.7%, O⋯H/H⋯O 27.7%, C⋯H/H⋯C 17.0%, and S⋯H/H⋯S 7.5%.