Thermoreversible [2 + 2] Photodimers of Monothiomaleimides and Intrinsically Recyclable Covalent Networks Thereof.

The development of intrinsically recyclable cross-linked materials remains challenged by the inherently unfavorable chemical equilibrium that dictates the efficiency of the reversible covalent bonding/debonding chemistry. Rather than having to (externally) manipulate the bonding equilibrium, we here introduce a new reversible chemistry platform based on monosubstituted thiomaleimides that can undergo complete and independent light-activated covalent bonding and on-demand thermal debonding above 120 °C. Specifically, repeated bonding/debonding of a small-molecule thiomaleimide [2 + 2] photodimer is demonstrated over five heat/light cycles with full conversion in both directions, thereby regenerating its initial monothiomaleimide constituents. This motivated the synthesis of multifunctional thiomaleimide reagents as precursors for the design of covalently cross-linked networks that display intrinsic switching between a monomeric and polymeric state. The resulting materials are shown to covalently dissociate and depolymerize upon heating both in solution and in bulk, thus transforming the densely photo-cross-linked material back into a viscous liquid. Temperature-regulated photorheology evidenced the intrinsic recyclability of the thiomaleimide-based thermosets during multiple cycles of UV cross-linking and thermal de-cross-linking. The thermally reversible photodimerization of thiomaleimides presents a new addition to the designer playground of dynamic polymer networks, providing interesting opportunities for the reprocessing and closed-loop recycling of covalently cross-linked materials.

Photoinduced Controlled/Living Polymerizations.

The application of photochemistry in polymer synthesis is of interest due to the unique possibilities offered compared to thermochemistry, including topological and temporal control, rapid polymerization, sustainable low-energy processes, and environmentally benign features leading to established and emerging applications in adhesives, coatings, adaptive manufacturing, etc. In particular, the utilization of photochemistry in controlled/living polymerizations often offers the capability for precise control over the macromolecular structure and chain length in addition to the associated advantages of photochemistry. Herein, the latest developments in photocontrolled living radical and cationic polymerizations and their combinations for application in polymer syntheses are discussed. This Review summarizes and highlights recent studies in the emerging area of photoinduced controlled/living polymerizations. A discussion of mechanistic details highlights differences as well as parallels between different systems for different polymerization methods and monomer applicability.

Controlled Synthesis of Well-Defined Polyaminoboranes on Scale Using a Robust and Efficient Catalyst.

The air tolerant precatalyst, [Rh(L)(NBD)]Cl ([1]Cl) [L = κ3-(iPr2PCH2CH2)2NH, NBD = norbornadiene], mediates the selective synthesis of N-methylpolyaminoborane, (H2BNMeH)n, by dehydropolymerization of H3B·NMeH2. Kinetic, speciation, and DFT studies show an induction period in which the active catalyst, Rh(L)H3 (3), forms, which sits as an outer-sphere adduct 3·H3BNMeH2 as the resting state. At the end of catalysis, dormant Rh(L)H2Cl (2) is formed. Reaction of 2 with H3B·NMeH2 returns 3, alongside the proposed formation of boronium [H2B(NMeH2)2]Cl. Aided by isotopic labeling, Eyring analysis, and DFT calculations, a mechanism is proposed in which the cooperative "PNHP" ligand templates dehydrogenation, releasing H2B═NMeH (ΔG‡calc = 19.6 kcal mol-1). H2B═NMeH is proposed to undergo rapid, low barrier, head-to-tail chain propagation for which 3 is the catalyst/initiator. A high molecular weight polymer is formed that is relatively insensitive to catalyst loading (Mn ∼71 000 g mol-1; D, of ∼ 1.6). The molecular weight can be controlled using [H2B(NMe2H)2]Cl as a chain transfer agent, Mn = 37 900-78 100 g mol-1. This polymerization is suggested to arise from an ensemble of processes (catalyst speciation, dehydrogenation, propagation, chain transfer) that are geared around the concentration of H3B·NMeH2. TGA and DSC thermal analysis of polymer produced on scale (10 g, 0.01 mol % [1]Cl) show a processing window that allows for melt extrusion of polyaminoborane strands, as well as hot pressing, drop casting, and electrospray deposition. By variation of conditions in the latter, smooth or porous microstructured films or spherical polyaminoboranes beads (∼100 nm) result.

Cationic Glycopolymers with Aggregation-Induced Emission for the Killing, Imaging, and Detection of Bacteria.

Cationic glycopolymers with structures similar to those of typical poly(ionic liquid)s (PILs) were synthesized via the quaternization reaction of poly(4-vinyl pyridine) with halogen-functionalized d-mannose and tetraphenylethylene units. Such postpolymerization modification provided PILs with aggregation-induced emission effect as well as specific carbohydrate-protein recognition with lectins such as concanavalin A. The interactions between cationic glycopolymers and different microorganisms, including Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli, were used for the killing, imaging, and detection of bacteria. Besides, these sugar-containing PILs showed a relatively low hemolysis rate due to the presence of saccharide units, which may have potential application in the field of biomaterials.

Block Copolymers Based on Ethylene and Methacrylates Using a Combination of Catalytic Chain Transfer Polymerisation (CCTP) and Radical Polymerisation.

Two scalable polymerisation methods are used in combination for the synthesis of ethylene and methacrylate block copolymers. ω-Unsaturated methacrylic oligomers (MMAn ) produced by catalytic chain transfer (co)polymerisation (CCTP) of methyl methacrylate (MMA) and methacrylic acid (MAA) are used as reagents in the radical polymerisation of ethylene (E) in dimethyl carbonate solvent under relatively mild conditions (80 bar, 70 °C). Kinetic measurements and analyses of the produced copolymers by size exclusion chromatography (SEC) and a combination of nuclear magnetic resonance (NMR) techniques indicate that MMAn is involved in a degradative chain transfer process resulting in the formation of (MMA)n -b-PE block copolymers. Molecular modelling performed by DFT supports the overall reactivity scheme and observed selectivities. The effect of MMAn molar mass and composition is also studied. The block copolymers were characterised by differential scanning calorimetry (DSC) and their bulk behaviour studied by SAXS/WAXS analysis.

Tandem Mass Spectrometry for Polymeric Structure Analysis: A Comparison of Two Common MALDI-ToF/ToF Techniques.

Tandem mass spectrometry is a powerful technique for investigating polymer architecture. However, in-depth studies of the technique for polymers is relatively lacking when compared to other areas of mass spectrometry (MS). This paper examines the use laser-induced dissociation and collision-induced dissociation (CID) in MALDI-LIFT-ToF/ToF experiments to compare the usage of the two techniques on a range of polymeric analytes. It is demonstrated that for samples with an energetically preferable fragmentation pathway, such as those with a functional group in the backbone or a labile end group, post source decay (PSD) provides a simplified spectra with an increased pathway selectivity due to its utilization of metastable decay. This makes PSD a preferable technique for polymer sequencing, especially in low-resolution time-of-flight techniques. Conversely, CID fragments less selectively, leading to higher intensity peaks from less favorable fragmentations. This makes CID more preferred for exact structural determination, such as finding the repeat unit structure.

Functional Brush Poly(2-ethyl-2-oxazine)s: Synthesis by CROP and RAFT, Thermoresponsiveness and Grafting onto Iron Oxide Nanoparticles.

Brush polymers are highly functional polymeric materials combining the properties of different polymer classes and have found numerous applications, for example, in nanomedicine. Here, the synthesis of functional phosphonate-ester-bearing brush polymers based on poly(2-oxazine)s is reported through a combination of cationic ring-opening polymerization (CROP) of 2-ethyl-2-oxazine and reversible addition-fragmentation chain transfer (RAFT) polymerization. In this way, a small library of well-defined (D ≤ 1.17) poly(oligo(2-ethyl-2-oxazine) methacrylate) P(OEtOzMA)n brushes with tunable lower critical solution temperature (LCST) behavior and negligible cell toxicity is prepared. Upon deprotection, the phosphonic acid end-group of the P(OEtOzMA)n brush enables the successful grafting-onto iron oxide nanoparticles (IONPs). Colloidal stability of the particle suspension in combination with suitable magnetic resonance imaging (MRI) relaxivities demonstrates the potential of these particles for future applications as negative MRI contrast agents.

Coating Titania Nanoparticles with Epoxy-Containing Catechol Polymers via Cu(0)-Living Radical Polymerization as Intelligent Enzyme Carriers.

Immobilization of enzyme could offer the biocatalyst with increased stability and important recoverability, which plays a vital role in the enzyme's industrial applications. In this study, we present a new strategy to build an intelligent enzyme carrier by coating titania nanoparticles with thermoresponsive epoxy-functionalized polymers. Zero-valent copper-mediated living radical polymerization (Cu(0)-LRP) was utilized herein to copolymerize N-isopropylacrylamide (NIPAM) and glycidyl acrylate (GA) directly from an unprotected dopamine-functionalized initiator to obtain an epoxy-containing polymer with terminal anchor for the "grafting to" or "one-pot" modification of titania nanoparticles. A rhodamine B-labeled laccase has been subsequently used as a model enzyme for successful immobilization to yield an intelligent titania/laccase hybrid bifunctional catalyst. The immobilized laccase has shown excellent thermal stability under ambient or even relatively high temperature above the lower critical solution temperature (LCST) at which temperature the hybrid particles could be facilely recovered for reuse. The enzyme activity could be maintained during the repeated use after recovery and enzymatic degradation of bisphenol A was proven to be efficient. The photocatalytic ability of titania was also investigated by fast degradation of rhodamine B under the excitation of simulated sunlight. Therefore, this study has provided a facile strategy for the immobilization of metal oxide catalysts with enzymes, which constructs a novel bifunctional catalyst that will be promising for the "one-pot" degradation of different organic pollutants.

Copper-Mediated Reversible Deactivation Radical Polymerization in Aqueous Media.

Key advances within the past 10 years have transformed copper-mediated radical polymerization from a technique which was not very tolerant of protic media into a range of closely related processes capable of controlling the polymerization of a wide range of monomers in pure water at ppm catalyst loadings. This approach has afforded water-soluble macromolecules of desired molecular weight, architecture, and chemical functionality, with applications ranging from drug delivery to oil processing. In this Review we highlight and critically evaluate the synthetic methods that have been developed to control radical polymerization in water by using copper complexes as well as identify future areas of interest and challenges still to be overcome.

Copper-Mediated Polymerization without External Deoxygenation or Oxygen Scavengers.

As a method for overcoming the challenge of rigorous deoxygenation in copper-mediated controlled radical polymerization processes [e.g., atom-transfer radical polymerization (ATRP)], reported here is a simple Cu0 -RDRP (RDRP=reversible deactivation radical polymerization) system in the absence of external additives (e.g., reducing agents, enzymes etc.). By simply adjusting the headspace of the reaction vessel, a wide range of monomers, namely acrylates, methacrylates, acrylamides, and styrene, can be polymerized in a controlled manner to yield polymers with low dispersities, near-quantitative conversions, and high end-group fidelity. Significantly, this approach is scalable (ca. 125 g), tolerant to elevated temperatures, compatible with both organic and aqueous media, and does not rely on external stimuli which may limit the monomer pool. The robustness and versatility of this methodology is further demonstrated by the applicability to other copper-mediated techniques, including conventional ATRP and light-mediated approaches.

Universal Conditions for the Controlled Polymerization of Acrylates, Methacrylates, and Styrene via Cu(0)-RDRP.

Atom transfer radical polymerization (ATRP) typically requires various parameters to be optimized in order to achieve a high degree of control over molecular weight and dispersity (such as the type of initiator, transition metal, ligand, solvent, temperature, deactivator, added salts, and reducing agents). These components play a major role when switching monomers, e.g., from acrylic to methacrylic and/or styrenic monomers during the synthesis of homo- and block copolymers as the stability and reactivity of the carbon centered propagating radical dramatically changes. This is a challenge for both "experts" and nonexperts as choosing the appropriate conditions for successful polymerization can be time-consuming and overall an arduous task. In this work, we describe one set of universal conditions for the efficacious polymerization of acrylates, methacrylates and styrene (using an identical initiator, ligand, copper salt, and solvent) based on commercially available and inexpensive reagents (PMDETA, IPA, Cu(0) wire). The versatility of these conditions is demonstrated by the near quantitative polymerization of these monomer families to yield well-defined materials over a range of molecular weights with low dispersities (∼1.1-1.2). The control and high end group fidelity is further exemplified by in situ block copolymerization upon sequential monomer addition for the case of methacrylates and styrene furnishing higher molecular weight copolymers with minimal termination. The facile nature of these conditions, combined with readily available reagents, will greatly expand the access and availability of tailored polymeric materials to all researchers.

Hydrolyzable Poly[Poly(Ethylene Glycol) Methyl Ether Acrylate]-Colistin Prodrugs through Copper-Mediated Photoinduced Living Radical Polymerization.

Through the recently developed copper-mediated photoinduced living radical polymerization (CP-LRP), a novel and well-defined polymeric prodrug of the antimicrobial lipopeptide colistin has been developed. A colistin initiator (Boc5-col-Br2) was synthesized through the modification of colistin on both of its threonine residues using a cleavable initiator linker, 2-(2-bromo-2-methylpropanoyloxy) acetic acid (BMPAA), and used for the polymerization of acrylates via CP-LRP. Polymerization proceeds from both sites of the colistin initiator, and through the polymerization of poly(ethylene glycol) methyl ether acrylate (PEGA480), three water-soluble polymer-colistin conjugates (col-PPEGA, having degrees of polymerization of 5, 10, and 20) were achieved with high yield (conversion of ≥93%) and narrow dispersities (D < 1.3) in 2-4 h. Little or no effect on the structure and activity of the colistin was observed during the synthesis, and most of the active colistin can be recovered from the conjugates in vitro within 2 days. Furthermore, in vitro biological analyses including disk diffusion, broth microdilution, and time-kill studies suggested that all of the conjugates have the ability to inhibit the growth of multidrug-resistant (MDR) Gram-negative bacteria, of which col-PPEGA DP5 and DP10 showed similar or better antibacterial performance compared to the clinically relevant colistin prodrug CMS, indicating their potential as an alternative antimicrobial therapy. Moreover, considering the control over the polymerization, the CP-LRP technique has the potential to provide an alternative platform for the development of polymer bioconjugates.

Specific and Differential Binding of N-Acetylgalactosamine Glycopolymers to the Human Macrophage Galactose Lectin and Asialoglycoprotein Receptor.

A range of glycopolymers composed of N-acetylgalactosamine were prepared via sequential Cu(I)-mediated polymerization and alkyne-azide click (CuAAC). The resulting polymers were shown, via multichannel surface plasmon resonance, to interact specifically with human macrophage galactose lectin (MGL; CD301) with high affinity (KD = 1.11 µM), but they did not bind to the mannose/fucose-selective human lectin dendritic-cell-specific intercellular adhesion molecule-3-grabbing nonintegrin (DC-SIGN; CD209). The effect of sugar ligand valency on the binding (so-called "glycoside cluster effect") of poly(N-acetylgalactosamine) to MGL was investigated by varying first the polymer chain length (DP: 100, 64, 40, 23, 12) and then the architecture (4- and 8-arm star glycopolymers). The chain length did not have a significant effect on the binding to MGL (KD = 0.17-0.52 µM); however, when compared to a hepatic C-type lectin of a similar monosaccharide specificity, the asialoglycoprotein receptor (ASGPR), the binding affinity was more noticeably affected (KD = 0.37- 6.65 µM). These data suggest that known differences in the specific configuration/orientation of the carbohydrate recognition domains of MGL and ASGPR are responsible for the differences in binding observed between the different polymers of varied chain length and architecture. In the future, this model has the potential to be employed for the development of tissue-selective delivery systems.

Regenerable-Catalyst-Aided, Opened to Air and Sunlight-Driven "CuAAC&ATRP" Concurrent Reaction for Sequence-Controlled Copolymer.

An ideal stimuli-responsive controlled/living radical polymerization should have the ability to manipulate the reaction through spatiotemporal "on/off" controls, achieving the polymerization under fully open conditions and allowing for precise control over macromolecular architecture with defined molecular weights and monomer sequence. In this contribution, the photo (sunlight)-induced electron transfer atom transfer radical-polymerization (PET-ATRP) can be realized to be reversibly activated and deactivated under fully open conditions utilizing one-component copper(II) thioxanthone carboxylate as multifunctional photocatalyst and oxygen scavenger. The polymerization behaviors are investigated, presenting controlled features with first-order kinetics and linear relationships between molecular weights and monomer conversions. More importantly, "CuAAC&ATRP" concurrent reaction combining PET-ATRP, photodriven deoxygenation, and photoactivated CuAAC click reaction is successfully employed to synthesize the sequence-defined multiblock functional copolymers, in which the iterative monomer additions can be easily manipulated under fully open conditions.

Comb Poly(Oligo(2-Ethyl-2-Oxazoline)Methacrylate)-Peptide Conjugates Prepared by Aqueous Cu(0)-Mediated Polymerization and Reductive Amination.

The controlled synthesis of poly(oligo(2-ethyl-2-oxazoline)methacrylate) (P(OEtOxMA)) polymers by Cu(0)-mediated polymerization in water/methanol mixtures is reported. Utilizing an acetal protected aldehyde initiator for the polymerization, well-defined polymers are synthesized (>99% conversion, Ð < 1.25) with subsequent postpolymerization deprotection resulting in α-aldehyde end group containing comb polymers. These P(OEtOxMA) are subsequently site-specifically conjugated, via reductive amination, to a dipeptide (NH2 -Gly-Tyr-COOH) as a model peptide, prior to conjugation to the functional peptide oxytocin. The resulting oxytocin conjugates are evaluated in comparison to poly(oligo(ethylene glycol) methyl ether methacrylate) combs synthesized in the same manner for potential effects on thermal stability in comparison to the native peptide.

Aqueous Copper(II) Photoinduced Polymerization of Acrylates: Low Copper Concentration and the Importance of Sodium Halide Salts.

Photoinduced metal-mediated radical polymerization is a rapidly developing technique which allows for the synthesis of macromolecules with defined molecular weight and narrow molecular weight distributions, although typically exhibiting significant limitations in aqueous media. Herein we demonstrate that the presence of alkali metal halide salts, in conjunction with low copper concentration and UV irradiation, allows for the controlled polymerization of water-soluble acrylates in aqueous media, yielding narrow molecular weight distributions and high conversions. Despite the aqueous environment which typically compromises polymer end group fidelity, chain extensions have also been successfully performed and different degrees of polymerization were targeted. Importantly, no conversion was observed in the absence of UV light and the polymerization could be switched "on" and "off" upon demand, as demonstrated by intermittent light and dark periods and thus allowing access to spatiotemporal control.

Stability Enhancing N-Terminal PEGylation of Oxytocin Exploiting Different Polymer Architectures and Conjugation Approaches.

Oxytocin, a cyclic nine amino acid neurohypophyseal hormone therapeutic, is effectively used in the control of postpartum hemorrhaging (PPH) and is on the WHO List of Essential Medicines. However, oxytocin has limited shelf life stability in aqueous solutions, particularly at temperatures in excess of 25 °C and injectable aqueous oxytocin formulations require refrigeration (<8 °C). This is particularly problematic in the hot climates often found in many developing countries where daytime temperatures can exceed 40 °C and where reliable cold-chain storage is not always achievable. The purpose of this study was to develop N-terminal amine targeted PEGylation strategies utilizing both linear PEG and polyPEG "comb" polymers as an effective method for stabilizing solution formulations of this peptide for prolonged storage in the absence of efficient cold-chain storage. The conjugation chemistries investigated herein include irreversible amine targeted conjugation methods utilizing NHS ester and aldehyde reductive amination chemistry. Additionally, one reversible conjugation method using a Schiff base approach was explored to allow for the release of the native peptide, thus, ensuring that biological activity remains unaffected. The reversibility of this approach was investigated for the different polymer architectures, alongside a nonpolymer oxytocin analogue to monitor how pH can tune native peptide release. Elevated temperature degradation studies of the polymer conjugates were evaluated to assess the stability of the PEGylated analogues in comparison to the native peptide in aqueous formulations to mimic storage conditions in developing nations and regions where storage under appropriate conditions is challenging.

Methacrylic Zwitterionic, Thermoresponsive, and Hydrophilic (Co)Polymers via Cu(0)-Polymerization: The Importance of Halide Salt Additives.

The synthesis of hydrophilic, thermoresponsive, and zwitterionic polymethacrylates is reported by Cu(0)-mediated reversible deactivation radical polymerization in water and/or water/alcohol mixtures. The predisproportionation of [Cu(I) (PMDETA)Cl] in water prior to initiator and monomer addition is exploited to yield well-defined polymethacrylates with full monomer conversions in 30 min. The addition of supplementary halide salts (NaCl) enables the synthesis of various molecular weight poly[poly(ethylene glycol) methyl ether methacrylate] (PEGMA475) (DPn = 10-80, Mn ≈ 10,000-40 000 g mol(-1)) with full monomer conversion and narrow molecular weight distributions attained in all cases (D ≈ 1.20-1.30). A bifunctional PEG initiator (average Mn ≈ 1000 g mol(-1)) is utilized for the polymerization of a wide range of methacrylates including 2-dimethylaminoethyl methacrylate, 2-morpholinoethyl methacrylate, [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide, and 2-methacryloyloxyethyl phosphorylcholine. Despite the high water content, high end group fidelity is demonstrated by in situ chain extensions and block copolymerizations with PEGMA475 yielding well-defined functional telechelic pentablock copolymers within 2.5 h.

Enlightening the Mechanism of Copper Mediated PhotoRDRP via High-Resolution Mass Spectrometry.

The initiation mechanism of photochemically mediated Cu-based reversible-deactivation radical polymerization (photoRDRP) was investigated using pulsed-laser polymerization (PLP) and high-resolution mass spectrometry. The variation of the catalyst composition and ESI-MS analysis of the resulting products provided information on how initiator, ligand, copper species, and monomer are interacting upon irradiation with UV light. A discussion of the results allows for a new postulation of the mechanism of photoRDRP and-for the first time-the unambiguous identification of the initiating species and their interactions within the reaction mixture. One pathway for radical generation proceeds via UV light-induced C-Br bond scission of the initiator, giving rise to propagating radicals. The generation of copper(I) species from copper(II) can occur via several pathways, including, among others, via reduction by free amine ligand in its excited as well as from its ground state via the irradiation with UV light. The amine ligand serves as a strong reducing agent and is likely the main participant in the generation of copper(I) species.

Well-Defined Protein/Peptide-Polymer Conjugates by Aqueous Cu-LRP: Synthesis and Controlled Self-Assembly.

The synthesis of well-defined protein/peptide-polymer conjugates with interesting self-assembly behavior via single electron transfer living radical polymerization in water is described. A range of protein/peptides with different physical and chemical properties have been modified to macroinitiators and optimized polymerization conditions ensure successful polymerization from soluble, insoluble, and dispersed protein/peptide molecules or protein aggregates. This powerful strategy tolerates a range of functional monomers and mediates efficient homo or block copolymerization to generate hydrophilic polymers with controlled molecular weight (MW) and narrow MW distribution. The polymerizations from bovine insulin macroinitiators follow surface-initiated "grafting from" polymerization mechanism and may involve a series of self-assembly and disassembly processes. Synthesized insulin-polymer conjugates form spheres in water, and the self-assembly behavior could be controlled via thermal control, carbohydrate-protein interaction, and protein denaturation.