RESUMO
Persistent water contaminants include a variety of substances that evade natural cleaning processes posing severe risks to ecosystems. Their adsorptive elimination is a key approach to safer attenuation. Herein we present the design and development of Prussian blue incorporated polypyrrole (PPY/PB) hybrid nanocomposite as a high-performance adsorbent for the elimination of malachite green (M.G.), isoniazid (INH) and 4-nitrophenol (4-NP) water contaminants. The nanocomposite synthesis was favored by strong dopant-polymer interactions, leading to a PPY/PB material with enhanced electro-active surface area compared to pristine PPY. The structure-activity response of the nanocomposite for the adsorption of target contaminants was unveiled by evaluating its maximum adsorption capacities under environmentally viable conditions. In-depth analysis and optimization of adsorption influencing factors (pH, temperature, and adsorbent dose) were performed. Using equilibrium studies, kinetic model fitting, aided with FTIR analysis, a multi-step mechanism for the adsorption of target contaminants on the nanocomposite was proposed. Furthermore, the PPY/PB nanocomposite also acts as a catalyst, enabling contaminant elimination following a synergistic scheme that was demonstrated using 4-NP contaminant. The synergetic adsorption and catalytic degradation of 4-NP using PPY/PB as adsorbent and catalyst was demonstrated in the presence of NaBH4 as a reducing agent in absence of light. In summary, this work highlights the targeted design of adsorbent, its optimization for adsorptive avidity, and the synergistic role of adsorption trapping in the catalytic degradation of persistent contaminants.
RESUMO
Defective PV panels reduce the efficiency of the whole PV string, causing loss of investment by decreasing its efficiency and lifetime. In this study, firstly, an isolated convolution neural model (ICNM) was prepared from scratch to classify the infrared images of PV panels based on their health, i.e., healthy, hotspot, and faulty. The ICNM occupies the least memory, and it also has the simplest architecture, lowest execution time, and an accuracy of 96% compared to transfer learned pre-trained ShuffleNet, GoogleNet, and SqueezeNet models. Afterward, ICNM, based on its advantages, is reused through transfer learning to classify the defects of PV panels into five classes, i.e., bird drop, single, patchwork, horizontally aligned string, and block with 97.62% testing accuracy. This proposed approach can identify and classify the PV panels based on their health and defects faster with high accuracy and occupies the least amount of the system's memory, resulting in savings in the PV investment.
Assuntos
Diagnóstico por ImagemRESUMO
A novel and efficient 3D biohybrid photocatalyst, defective MoS2 nanosheets encapsulated carbonized rape pollen, was fabricated and applied to water disinfection. The rape pollen-MoS2 (PM) biohybrid showed excellent dispersibility, high stability, and efficient charge-carrier separation and migration ability, resulting in the highly enhanced photocatalytic inactivation performance toward various waterborne bacteria under different light sources. The inactivation mechanisms were systematically investigated. Reactive species (RSs), including electrons, holes, and reactive oxygen species (â¢O2- and â¢OH), played major roles in inactivating bacteria. The antioxidant system of bacteria exhibited a self-protection capacity by eliminating the photogenerated RSs from PM biohybrid at the early stage of inactivation. With the accumulation of RSs, the cell membrane and membrane-associated functions were destroyed, as suggested by the collapse of cell envelope and subsequent loss of cell respiration and ATP synthesis capacity. The microscopic images further confirmed the destruction of the bacterial membrane. After losing the membrane barrier, the oxidation of cytoplasmic proteins and lipids caused by invaded RSs occurred readily. Finally, the leakage of DNA and RNA announced the irreversible death of bacteria. These results indicated that the bacterial inactivation began with the membrane rupture, followed by the oxidation and leakage of intracellular substances. This work not only provided a new insight into the combination of semiconductors with earth-abundant biomaterials for fabricating high-performance photocatalysts, but also revealed the underlying mechanisms of photocatalytic bacterial inactivation in depth.
Assuntos
Molibdênio , Bactérias , Brassica napus , Catálise , Luz , PólenRESUMO
Nanobiosensors based on aptamer are extensively being studied as potent analytical tools in clinical analysis. These biosensors provide high sensitivity, fast response, specificity and desired portability in addition to simplicity and decreased cost compared to conventional methods. The purpose of this manuscript is to provide readers with an overview of current advances about electrochemical, electrochemiluminescent and photoelectrochemical aptasensors from the sea of available literature. These are mainly used for determination of protein-based biomarkers, especially for cancer diagnosis. Here in we have given special emphasis on nanosize-based aptasensors which have been reported to show considerable improvement in the analytical performance.
RESUMO
This study was planned to evaluate sample wise isolation and antimicrobial resistant trends of Acinetobacter spp in different departments of a tertiary care hospital. This was a transversal descriptive study, carried out in the clinical microbiology laboratory of the Allama Iqbal Medical College/ Jinnah Hospital, Lahore, Pakistan, during the period of January 2015 to December 2016. Every clinical specimen was processed for bacterial culture and antimicrobial susceptibly testing. A total of 3590 (2015=1780, 2016=1810) clinical specimens were processed. Of the total, only 54.7% were gram-negative, among these Acinetobacter spp were isolated from 10.1% and 16.5% samples respectively in 2015-16 with an overall rate of 24.3%. The highest occurrence of Acinetobacter spp isolates was reported from Intensive care units (ICU) (54%) followed by surgical units (25%) and medical units (16%). It is noteworthy that ICU and internal medicine showed the highest resistance rates, whereas, lower resistance rate was observed for the outdoor patients (OPD). Although collistin showed 0% resistant while ceftriaxone, ciprofloxacin, gentamicin, and tigecycline showed 90%, 68%, 66%, 66% and 62% resistance against Acinetobacter spp. respectively. An alarming increase in the resistance rate of meropenem, cefoperazone/sulbactam, piperacillin/ tazobactam, ciprofloxacin, and imipenem was observed from the year 2015 to 2016. This startling resistance acquired by Acinetobacter spp. within a period of one year, represent very limited therapeutic options left for the infections caused by Acinetobacter spp. Unavailability of effective drugs and limited therapeutic options enforce the health care practitioners to prescribe expensive and broad range antibiotics, which may cause harm to the patient. Therefore, it is need of an hour to better understand the antimicrobial patterns and optimize antimicrobial prescription policies for the control of multidrug-resistant Acinetobacter spp.
Assuntos
Acinetobacter/efeitos dos fármacos , Acinetobacter/isolamento & purificação , Antibacterianos/farmacologia , Farmacorresistência Bacteriana/efeitos dos fármacos , Acinetobacter/fisiologia , Infecções por Acinetobacter/tratamento farmacológico , Antibacterianos/uso terapêutico , Infecção Hospitalar/tratamento farmacológico , Farmacorresistência Bacteriana/fisiologia , Humanos , Testes de Sensibilidade Microbiana/métodos , Centros de Atenção Terciária/normas , Centros de Atenção Terciária/tendênciasRESUMO
Layered double hydroxides (LDHs) are promising materials for oxygen evolution reactions (OERs), a key component of water splitting to produce hydrogen and oxygen via water electrolysis. However, the performance of LDHs can be limited by their low surface area and poor accessibility of active sites. In this work, we synthesized highly exfoliated 2D NiAl-LDHs by aqueous miscible solvent treatment method (AMOST) and compared its electrocatalytic efficiency with its analogue synthesised via slow urea hydrolysis. We demonstrate that the exfoliated 2D LDHs prepared by AMOST method have a higher surface area and more active sites than the crystalline LDHs obtained through urea hydrolysis, resulting in a superior OER activity and efficiency. The exfoliated 2D LDHs required a lower overpotential of 280â mV to reach a current density of 50â mA cm-2 and it also outperformed IrO2 , a benchmark OER catalyst, in terms of overpotential and stability. We demonstrate that the physicochemical properties of nanosheets derived from NIAl-LDH-based materials are strongly influenced by the synthetic methodology, which affects the exfoliation degree, surface area and active site density. These factors are crucial for improving the OER catalytic performance of these materials, as shown by our results.
RESUMO
CO2 capture is a useful strategy for controlling the risks associated with global warming. The design of an adsorbent is essential for clean and potentially energy-efficient adsorption-based carbon capture processes. This study reports a facile and moderately temperature single-stage combined pyrolysis and activation strategy for the synthesis of nitrogen-doped carbons for high-performance CO2 capture. Using nitrogen-rich Albizia procera leaves as the precursor and carrying out single-stage pyrolysis and activation at temperatures of 500, 600, and 700 °C in the presence NaHCO3 as an activating agent, carbons with different surface characteristics and ultrahigh weight percentage (22-25%) of nitrogen were obtained. The subtle differences in surface characteristics and nitrogen content had a bearing on the CO2 adsorption performance of the resultant adsorbents. Outstanding results were achieved, with a CO2 adsorption capacity of up to 2.5 mmol/g and a CO2 over N2 selectivities reaching 54. The isotherm results were utilized to determine the performance indicators for a practical vacuum swing adsorption process. This study provides a practical strategy for the efficient synthesis of nitrogen-doped carbons for various adsorption applications.
RESUMO
CO2 capture is a practical approach to mitigating the impacts of global warming. Adsorption-based carbon capture is a clean and potentially energy-efficient method whose performance greatly depends on adsorbent design. In this study, we explored the use of jute-derived carbon as a high-performance adsorbent for CO2 capture. The carbons were produced by pyrolyzing powdered jute sticks with NaHCO3 as an activating agent at 500-700 °C. Impressive adsorption capacities of up to 2.5â mmol â g-1 and CO2 /N2 selectivities of up to 54 were achieved by adjusting the pore size distribution and surface functionalization. Based on the isotherm results, the working capacities, regenerabilities, and potentials for CO2 separation were determined for a practical vacuum swing adsorption process. The adsorbent materials were characterized by XRD, FTIR, Raman, FESEM and N2 sorption at 77â K. This study provides a general approach for designing adsorbents for various gas-separation applications.
RESUMO
Atmospheric NO2 removal is urgent and necessary due to its negative effects on the eco-system. Here we developed the chrysanthemum flower-like silica (KCC-1) loaded with highly dispersed copper nanoparticles for efficient NO2 removal under ambient conditions. We carefully studied the NO2 removal performance of Cu-KCC-1 materials with different copper loadings (0, 5, 10, and 15 wt%) and demonstrated the Cu0 nanoparticles (10 wt%) boosted the NO2 removal capacity of KCC-1 by up to 51 times. KCC-1 loaded with 10 wt% of copper was verified to be the best-performing adsorbents, featuring an efficient NO2 removal capacity of 3.63 mmol/g and a moderate NO release (11.3%), which was primarily attributed to the presence of Cu0 nanoparticles. The mechanistic study unveiled that the loaded Cu0 particles served as active adsorption sites for NO2 molecules and reduced the NO2 dissociation by covering the sites primarily responsible for NO2 dissociation (i.e., oxygen vacancies). This work affords a promising adsorbent for NO2 abatement under ambient conditions. The new knowledge established in developing adsorbents for NO2 would promote future research in this emerging and niche area of air pollution control.
Assuntos
Chrysanthemum , Nanopartículas , Adsorção , Cobre , Dióxido de Nitrogênio , Dióxido de SilícioRESUMO
The development of wide-spectrum responsive photocatalysts for efficient formaldehyde (HCHO) removal is highly desired yet remains a great challenge. Here we successfully converted zeolitic imidazolate framework-8 (ZIF-8), one of the most well-studied metal-organic frameworks (MOFs), from routine ultraviolet-driven to novel broad-spectrum-driven photocatalyst via a facile thermal treatment. The isocyanate groups (-N[double bond, length as m-dash]C[double bond, length as m-dash]O) formed in the thermally treated ZIF-8 (ZIF-8-T) is crucial in enabling the superior photocatalytic performance in formaldehyde degradation. Specifically, the best-performing ZIF-8-T sample showed around 2.1 and 9.4 times the HCHO adsorption amount and the solar photocatalytic degradation rate, respectively, of pristine ZIF-8. In addition, ZIF-8-T exhibited visible light (λ ≥ 400 nm) photocatalytic HCHO degradation performance, photo-converting 72% and nearly 100% of 20 ppm and 10 ppm HCHO within 1 hour, respectively. This work affords new insights and knowledge that inspire and inform the design and development of MOF-based photocatalysts with broad-spectrum responses for efficient air purification operations.
RESUMO
The CO2 concentration in the atmosphere is increasing and threatening the earth's climate. Selective CO2 capture at large point sources will help to reduce the CO2 emissions to the atmosphere. Biochar with microporous structure could be a potential material to capture CO2. The impact of feedstock type, pyrolysis temperature and steam activation of biochars were evaluated for CO2 adsorption capacity. Pine sawdust biochars were produced at 550⯰C, and steam activated for 45â¯min at the same temperature after completing the pyrolysis (PS550 and PSS550). Paper mill sludge biochars were produced at 300 and 600⯰C (PMS300 and PMS600). The CO2 adsorption capacity of biochars was tested at 25⯰C using a volumetric sorption analyzer. Pine sawdust biochars showed significantly higher CO2 adsorption capacity than paper mill sludge biochars due to high surface area and microporosity. Pine sawdust biochars were then evaluated for dynamic adsorption under representative post-combustion flue gas concentration conditions (15% CO2, 85% N2) using a breakthrough rig. Both materials showed selective CO2 uptake over N2 which is the major component along with CO2 in flue gas. PSS550 had slightly higher CO2 adsorption capacity (0.73â¯mmol g^-1 vs 0.67â¯mmol g^-1) and CO2 over N2 selectivity (26 vs 18) than PS550 possibly due to increase of microporosity, surface area, and oxygen containing basic functional groups through steam activation. Pine sawdust biochar is an environmentally friendly and low-cost material to capture CO2.
Assuntos
Dióxido de Carbono , Esgotos , Adsorção , Carvão Vegetal , PorosidadeRESUMO
Efficient conversion of food waste to value-added products necessitates the development of high-performance heterogeneous catalysts. This study evaluated the use of Al2O3 as a low-cost and abundant support material for fabricating Lewis acid catalysts, i.e., through the in-situ doping of Cu, Ni, Co, and Zr into Al2O3 followed by calcination. The characterisation results show that all catalysts were mainly amorphous. In particular, adding the transition metals to the Al2O3 matrix resulted in the increase of acidity and meso-/micro-pores. The catalysts were evaluated in the conversion of glucose, which can be easily derived from starch-rich food waste (e.g., bread waste) via hydrolysis, to fructose in biorefinery. The results indicate that the Ni-doped Al2O3 (Al-Ni-C) achieved the highest fructose yield (19 mol%) and selectivity (59 mol%) under heating at 170 °C for 20 min, of which the performance falls into the range reported in literature. In contrast, the Zr-doped Al2O3 (Al-Zr-C) presented the lowest fructose selectivity despite the highest glucose conversion, meaning that the catalyst was relatively active towards the side reactions of glucose and intermediates. The porosity and acidity, modified via metal impregnation, were deduced as the determinants of the catalytic performance. It is noteworthy that the importance of these parameters may vary in a relative sense and the limiting factor could shift from one parameter to another. Therefore, evaluating physicochemical properties as a whole, instead of the unilateral improvement of a single parameter, is encouraged to leverage each functionality for cost-effectiveness. This study provides insights into the structure-performance relationships to promote advance in catalyst design serving a sustainable food waste biorefinery.
Assuntos
Óxido de Alumínio/química , Alimentos , Eliminação de Resíduos/métodos , Resíduos , Glucose , Concentração de Íons de Hidrogênio , Hidrólise , Metais/química , PorosidadeRESUMO
Layered double hydroxides (LDHs) have been intensively studied in recent years owing to their great potential in CO2 capture. However, the severe aggregation between platelets and low surface area restricted it from exhibiting very high CO2 adsorption capacity and CO2/N2 selectivity. In this research, we for the first time synthesized Ni-Al-CO3 and Cu-Al-CO3 LDHs using aqueous miscible organic solvent treatment (AMOST) method. The as-synthesized materials were evaluated for CO2 adsorption at three different temperatures (50, 80, 120 °C) applicable to post-combustion CO2 capture. Characterized with XRD, N2 adsorption-desorption, TEM, EDX, and TGA, we found the newly synthesized Ni-Al-CO3 LDH showed a nano-flower-like morphology comprising randomly oriented 2D nanoplatelets with both high surface area (249.45 m2/g) and pore volume (0.59 cc/g). Experimental results demonstrated that un-calcined Ni-Al-CO3 LDH is superior in terms of CO2 capture among the three LDHs, with a maximum CO2 adsorption capacity of 0.87 mmol/g and the ideal CO2/N2 selectivity of 166 at 50 °C under 1200 mbar for typical flue gas CO2/N2 composition (CO2:N2 = 15:85, v/v). This is the first report of a delaminated Ni-Al-CO3 LDH showing better CO2 capture performance than the well-reported optimal Mg layered double hydroxide.
RESUMO
CO2 capture is projected as one of the pragmatic approaches to deal with the global warming phenomenon. Adsorption-based CO2 capture is considered an economically attractive option to reduce CO2 emission. The success of the adsorption-based capture primarily relies on adsorbents and thus a variety of adsorbents have been investigated in the literature. We here report a high surface area (210.2 m2/g) exfoliated Ni-Al LDH nanoplatelet as a promising candidate for CO2 capture at an intermediate temperature of 200 °C applicable to integrated gasification combined cycle (IGCC) and sorption enhanced water gas shift (SEWGS) reactions. The materials were well characterized by PXRD, TGA, FTIR, TEM, ICP-OES, and N2 adsorption surface area, and pore size distribution techniques. A unique nanoflower morphology comprising of exfoliated LDH platelets of ca. 5 layer thickness was obtained. The CO2 capture capacity (0.66 mmol/g) of the exfoliated Ni-Al LDH nanoplatelet is comparable to that of the widely reported Mg-Al LDH-derived mixed oxides and MgO-based adsorbents. Provided that Ni-Al and other transition metal LDH materials are known to exhibit superior catalytic properties for CO2 methanation, this work could pave the way for development of dual-functional materials for CO2 capture and conversion.