Seebeck coefficients of regioregular poly(3-hexylthiophene) correlated with doping levels.

Thermoelectric properties of regioregular poly(3-hexylthiophene) (P3HT) were investigated in correlation with doping level measured by a potential-step chronocoulometry (PSC) method. It was found that the log-log plot of Seebeck coefficients against doping levels showed a good linearity, whose slope value was around -1.

Impact of the molecular structure and adsorption mode of D-π-A dye sensitizers with a pyridyl group in dye-sensitized solar cells on the adsorption equilibrium constant for dye-adsorption on TiO2 surface.

D-π-A dyes NI-4 bearing a pyridyl group, YNI-1 bearing two pyridyl groups and YNI-2 bearing two thienylpyridyl groups as the anchoring group on the TiO2 surface have been developed as dye sensitizers for dye-sensitized solar cells (DSSCs), where NI-4 and YNI-2 can adsorb onto the TiO2 electrode through the formation of the coordinate bond between the pyridyl group of the dye and the Lewis acid site (exposed Tin+ cations) on the TiO2 surface, but YNI-1 is predominantly adsorbed on the TiO2 electrode through the formation of the hydrogen bond between the pyridyl group of the dye and the Brønsted acid sites (surface-bound hydroxyl groups, Ti-OH) on the TiO2 surface. The difference in the dye-adsorption mode among the three dyes on the TiO2 surface has been investigated from the adsorption equilibrium constant (Kad) based on the Langmuir adsorption isotherms. It was found that the Kad values of YNI-1 and YNI-2 are higher than that of NI-4, and more interestingly, the Kad value of YNI-2 is higher than that of YNI-1. This work demonstrates that that for the D-π-A dye sensitizers with the pyridyl group as the anchoring group to the TiO2 surface the number of pyridyl groups and the dye-adsorption mode on the TiO2 electrode as well as the molecular structure of the dye sensitizer affect the Kad value for the adsorption of the dye to the TiO2 electrode, that is, resulting in a difference in the Kad value among the D-π-A dye sensitizers NI-4, YNI-1 and YNI-2.

Impact of Nitroxyl Radicals on Photovoltaic Conversion Properties of Dye-Sensitized Solar Cells.

Nitroxyl radicals, characterized by unique redox properties, have been investigated for their potential influence on the photovoltaic conversion properties of dye-sensitized solar cells (DSSCs). In this study, we investigated the influence of nitroxyl radicals as donor sites in DSSCs. We observed that the redox activity of nitroxyl radicals significantly enhanced the photovoltaic conversion efficiency of DSSCs; this finding can offer new insights into the application of these radicals in solar energy conversion. Furthermore, we found that increasing the proportion of nitroxyl radicals improved the DSSC performance. Through a combination of experimental and analytical approaches, we elucidated the mechanism underlying this enhancement and highlighted the potential for more efficient DSSCs using nitroxyl radicals as key components. These findings provide new avenues for developing advanced DSSCs with improved performances and sustainability.

Dynamic coagulofibrinolytic responses under long-term VV-ECMO management without anticoagulation in a COVID-19-ARDS patient: A case report.

RATIONALE: Venovenous extracorporeal membrane oxygenation (ECMO) is recommended for the treatment of critically ill patients with acute respiratory distress syndrome due to coronavirus disease 2019 (COVID-19). However, ECMO management can cause both bleeding and thrombotic complications. There are insufficient coagulofibrinolytic data for appropriate ECMO management in patients with COVID-19. PATIENT CONCERNS: A 48-year-old man with severe COVID-19-acute respiratory distress syndrome underwent long-term venovenous ECMO management for 48 days. Refractory oronasal bleeding developed on day 13, so the administration of unfractionated heparin was ceased for 29 days. DIAGNOSIS: The patient showed dynamic coagulofibrinolytic responses associated with ECMO management, as shown by fibrin/fibrinogen degradation products, soluble fibrin, thrombin-antithrombin complex, and plasmin-α2-plasmin inhibitor complex elevations, suggesting the development of ECMO-induced coagulopathy. INTERVENTIONS: We assessed coagulofibrinolytic markers to decide the appropriate timing for controlling excessive activation of coagulation by exchanging ECMO circuits. Moreover, viscoelastic hemostatic assays were used for adequate transfusion of blood products. OUTCOMES: Safe long-term ECMO management was completed, which was withdrawn on day 48. The patient was weaned off mechanical ventilation on day 57 and was transferred to another hospital for rehabilitation. LESSONS: Monitoring the coagulofibrinolytic status using markers and viscoelastic hemostatic assays may be effective for safe long-term ECMO management even without anticoagulant therapy.

Circulating Syndecan-1 Levels Are Associated with Chronological Coagulofibrinolytic Responses and the Development of Disseminated Intravascular Coagulation (DIC) after Trauma: A Retrospective Observational Study.

BACKGROUND: The purpose of this study was to evaluate the association between endotheliopathy represented by high levels of circulating syndecan-1 (SDC-1) and coagulofibrinolytic responses due to trauma, which can lead to disseminated intravascular coagulation (DIC). METHODS: We retrospectively evaluated 48 eligible trauma patients immediately admitted to our hospital and assessed SDC-1 and coagulofibrinolytic parameters for 7 days after admission. We compared the longitudinal changes of coagulofibrinolytic parameters and SDC-1 levels between two groups (high and low SDC-1) according to median SDC-1 value on admission. RESULTS: The median circulating SDC-1 level was 99.6 (61.1-214.3) ng/mL on admission, and levels remained high until 7 days after admission. Coagulofibrinolytic responses assessed by biomarkers immediately after trauma were correlated with SDC-1 elevation (thrombin-antithrombin complex, TAT: r = 0.352, p = 0.001; antithrombin, AT: r = -0.301, p < 0.001; plasmin-α2-plasmin inhibitor complex, PIC: r = 0.503, p = 0.035; tissue plasminogen activator, tPA: r = 0.630, p < 0.001). Sustained SDC-1 elevation was associated with intense and prolonged coagulation activation, impairment of anticoagulation, and fibrinolytic activation followed by inhibition of fibrinolysis, which are the primary responses associated with development of DIC in the acute phase of trauma. Elevation of circulating SDC-1 level was also associated with consumption coagulopathy and the need for transfusion, which revealed a significant association between high SDC-1 levels and the development of DIC after trauma (area under the curve, AUC = 0.845, cut-off value = 130.38 ng/mL, p = 0.001). CONCLUSIONS: High circulating levels of syndecan-1 were associated with intense and prolonged coagulation activation, impairment of anticoagulation, fibrinolytic activation, and consumption coagulopathy after trauma. Endotheliopathy represented by SDC-1 elevation was associated with trauma induced coagulopathy, which can lead to the development of DIC.

Cricotracheostomy for patients with severe COVID-19: A case control study.

Background: Tracheostomy is an important procedure for the treatment of severe coronavirus disease-2019 (COVID-19). Older age and obesity have been reported to be associated with the risk of severe COVID-19 and prolonged intubation, and anticoagulants are often administered in patients with severe COVID-19; these factors are also related to a higher risk of tracheostomy. Cricotracheostomy, a modified procedure for opening the airway through intentional partial cricoid cartilage resection, was recently reported to be useful in cases with low-lying larynx, obesity, stiff neck, and bleeding tendency. Here, we investigated the usefulness and safety of cricotracheostomy for severe COVID-19 patients. Materials and methods: Fifteen patients with severe COVID-19 who underwent cricotracheostomy between January 2021 and April 2022 with a follow-up period of ≥ 14 days were included in this study. Forty patients with respiratory failure not related to COVID-19 who underwent traditional tracheostomy between January 2015 and April 2022 comprised the control group. Data were collected from medical records and comprised age, sex, body mass index, interval from intubation to tracheostomy, use of anticoagulants, complications of tracheostomy, and decannulation. Results: Age, sex, and days from intubation to tracheostomy were not significantly different between the COVID-19/cricotracheostomy and control/traditional tracheostomy groups. Body mass index was significantly higher in the COVID-19 group than that in the control group (P = 0.02). The rate of use of anticoagulants was significantly higher in the COVID-19 group compared with the control group (P < 0.01). Peri-operative bleeding, subcutaneous emphysema, and stomal infection rates were not different between the groups, while stomal granulation was significantly less in the COVID-19 group (P = 0.04). Conclusions: These results suggest that cricotracheostomy is a safe procedure in patients with severe COVID-19.

Photophysical and electrochemical properties, and molecular structures of organic dyes for dye-sensitized solar cells.

Dye-sensitized solar cells (DSSCs) based on organic dyes adsorbed on oxide semiconductor electrodes, such as TiO(2), ZnO, or NiO, which have emerged as a new generation of sustainable photovoltaic devices, have attracted much attention from chemists, physicists, and engineers because of enormous scientific interest in not only their construction and operational principles, but also in their high incident-solar-light-to-electricity conversion efficiency and low cost of production. To develop high-performance DSSCs, it is important to create efficient organic dye sensitizers, which should be optimized for the photophysical and electrochemical properties of the dyes themselves, with molecular structures that provide good light-harvesting features, good electron communication between the dye and semiconductor electrode and between the dye and electrolyte, and to control the molecular orientation and arrangement of the dyes on a semiconductor surface. The aim of this Review is not to make a list of a number of organic dye sensitizers developed so far, but to provide a new direction in the epoch-making molecular design of organic dyes for high photovoltaic performance and long-term stability of DSSCs, based on the accumulated knowledge of their photophysical and electrochemical properties, and molecular structures of the organic dye sensitizers developed so far.

Intermolecular distances of carboxylated TEMPO derivatives on TiO2 evaluated by spin-probe ESR.

Nearest-neighbor intermolecular distances of molecules adsorbed on the surface of nanocrystalline TiO(2) particles were evaluated by the electron spin resonance (ESR) technique with molecules having a nitroxide radical and a carboxyl group as a spin probe to clarify their aggregation behaviors on TiO(2) and the influence of coadsorbates.

Development of a simple method for fabrication of transparent conductive films with high mechanical strength.

We have developed a simple method of fabricating transparent conductive films with a high mechanical strength on glass and indium tin oxide substrates. It does not require a large excess of organic solvents and polymerization catalysts and can yield smooth films by spin-coating of a mixture of a commercially available aqueous dispersion of poly(3,4-ethylenedioxythiophene)-poly(4-styrene sulfonate) and a neat liquid of tetraethyl orthosilicate. Preparation conditions such as feed ratio, kinds of additives, and annealing temperature and time were optimized to give highly conductive, transparent and mechanically strong films.

Laryngeal complications after endotracheal intubation and prone positioning in patients with coronavirus disease 2019.

Objectives: Laryngeal complications have been reported after endotracheal intubation and prone positioning in patients with critical coronavirus disease 2019 (COVID-19), but their association is unclear. In this study, we investigated the rate of laryngeal complications in patients with COVID-19 compared to an alternative condition (control group). Methods: We retrospectively analyzed the data of 40 patients who underwent endotracheal intubation for either COVID-19 or an alternative condition (control group). Data on age, sex, body mass index (BMI), cardiovascular disease (CVD) risk factors, use of prone therapy, duration of endotracheal intubation, and duration from extubation/tracheostomy to laryngeal evaluation were collected from medical records. Results: There were no significant differences in BMI, frequency of CVD risk factors, duration of endotracheal intubation, or duration from extubation/tracheostomy to laryngeal evaluation between the two groups. In the COVID-19 group, all patients adopted the prone position. In comparison, only one patient in the control group adopted the prone position. Significant differences were observed between the two groups regarding the incidence of vocal fold immobility and laryngeal granuloma. Conclusion: Laryngeal complications were more common in the COVID-19 group than in the control group. Prone positioning may be a risk factor for these complications. Level of Evidence: 4.

Dye-sensitized solar cells based on donor-π-acceptor fluorescent dyes with a pyridine ring as an electron-withdrawing-injecting anchoring group.

A new-type of donor-acceptor π-conjugated (D-π-A) fluorescent dyes NI3-NI8 with a pyridine ring as electron-withdrawing-injecting anchoring group have been developed and their photovoltaic performances in dye-sensitized solar cells (DSSCs) are investigated. The short-circuit photocurrent densities and solar energy-to-electricity conversion yields of DSSCs based on NI3-NI8 are greater than those for the conventional D-π-A dye sensitizers NI1 and NI2 with a carboxyl group as the electron-withdrawing anchoring group. The IR spectra of NI3-NI8 adsorbed on TiO(2) indicate the formation of coordinate bonds between the pyridine ring of dyes NI3-NI8 and the Lewis acid sites (exposed Ti(n+) cations) of the TiO(2) surface. This work demonstrates that the pyridine rings of D-π-A dye sensitizers that form a coordinate bond with the Lewis acid site of a TiO(2) surface are promising candidates as not only electron-withdrawing anchoring group but also electron-injecting group, rather than the carboxyl groups of the conventional D-π-A dye sensitizers that form an ester linkage with the Brønsted acid sites of the TiO(2) surface.

Detection of water in organic solvents by photo-induced electron transfer method.

A new class of fluorescence sensor for detection of water in organic solvents based on photo-induced electron transfer (PET) of anthracene coupled with an amino acid has been designed and developed.

Synthesis and fluorescence and electrochemical properties of D-pi-A structural isomers of benzofuro[2,3-c]oxazolo[4,5-a]carbazole-type and benzofuro[2,3-c]oxazolo[5,4-a]carbazole-type fluorescent dyes.

Heteropolycyclic donor--acceptor (D--A) structural isomers of benzofuro[2,3-c]oxazolo[4,5-a]carbazole-type (2a-f) and benzofuro[2,3-c]oxazolo[5,4-a]carbazole-type fluorescent dyes (3a-f), which differ in the position of oxygen and nitrogen atoms of the oxazole ring, have been synthesized, and their photophysical and electrochemical properties have been investigated. The fluorescent dyes 2a-f exhibit much stronger intramolecular charge transfer (ICT) absorption and fluorescence bands than 3a-f. Both of the D-pi-A structural isomers showed bathochromic shifts of the fluorescence band and a decrease in the fluorescence quantum yields with increasing solvent polarity (i.e., positive fluorescence solvatochromism), and the bathochromic shifts for 3a-f were larger than those for 2a-f. The fluorescent dyes 2a-c and 3a-c, which have cyano and carboxyl groups, and carboxylic acid ester as electron-withdrawing substituents, exhibited significant fluorescence solvatochromic properties, compared to 2e, 2f, 3e and 3f without an electron-withdrawing substituent. The fluorescence solvatochromism of the fluorescent dyes were analyzed with the Lippert-Mataga correlation. Moreover, to elucidate the differences of photophysical properties among the fluorescent dyes, we have performed time-resolved fluorescence spectroscopic measurements, and a change of the electronic or molecular structures between the ground and excited states was evaluated by a comparison of the experimental radiative rate constant (k(r)) with the Strickler-Berg rate constant (kSB(r)). The electrochemical properties of 2a-f and 3a-f were determined by cyclic voltammetry, which demonstrated that these fluorescent dyes have similar HOMO energy levels, but different LUMO energy levels. Semi-empirical molecular orbital calculations (AM1 and INDO/S) have been carried out to elucidate the effects of the substituents and chromophore skeleton on photophysical properties of the two D-pi-A structural isomers. These studies indicated that the ICT characteristics in the excited state are different among the fluorescent dyes, which is a principal reason for the differences of the fluorescence solvatochromism and the substituent dependent fluorescence properties among the two D-pi-A structural isomers.

Thoracoscopic radical surgery for a morbidly obese patient with early lung cancer after laparoscopic sleeve gastrectomy: a case report.

BACKGROUND: We experienced a case of early stage lung cancer involving a morbidly obese patient. Obesity is associated with a higher incidence of surgical complications. We examined the effectiveness of laparoscopic sleeve gastrectomy as a primary weight loss procedure in a morbidly obese patient who required oncological surgery. CASE PRESENTATION: A 64-year-old morbidly obese female with a body mass index of 43.5 kg/m2 was referred to our hospital to undergo weight loss. A right-sided lung mass was found incidentally on computed tomography conducted in preparation for laparoscopic sleeve gastrectomy, which was performed prior to tumor surgery. As a result, weight loss was achieved within 2.5 months after the laparoscopic sleeve gastrectomy, and the patient's type-2 diabetes, hypertension, and dyslipidemia, which are linked to obesity, were markedly ameliorated. After a quick intraoperative pathological inspection revealed that the tumor was malignant, thoracoscopic right lung superior lobe resection was performed safely. CONCLUSIONS: Laparoscopic sleeve gastrectomy proved to be a powerful approach in a case in which a morbidly obese patient with early stage cancer needed to lose weight rapidly.

New four-band electrode fabrication to measure in situ electrical property of conducting polymers.

A simple and renewable four-band platinum electrode for in situ conductivity measurement of polymers is described. A model is developed to evaluate contact resistance between the electrode and polyaniline film and calibrate the film resistances obtained by two-probe and four-probe methods. The conductivity of the film is calculated from the calibrated resistance. By comparing the effects of band thickness, gap width, and film thickness, it is found that the ratio K of the middle gap width to the thickness of the internal two platinum bands is the most important parameter to characterize one four-band electrode. An ideal four-band electrode should have large K and wide middle gap as possible so long as the film can uniformly cover the electrode. Under this case, the influence of contact resistance on the four-probe measurement of film resistance is negligible. It is shown that contact resistance depends on the oxidation state of the film. It rises nonlinearly with increasing film resistance.

Changes in electrochemical and optical properties of oligoalkylthiophene film induced by bipolaron formation.

An unusual electrochemical response is found for oligoalkylthiophene (13T) films in acetonitrile. A pristine 13T film exhibits a stable redox wave in cyclic voltammogram when the anodic potential limit is below 0.6 V, whereas the redox peaks shift clearly to the negative side by ca. 0.1 V once the 13T film experiences a potential beyond 0.7 V. After this electrochemical stimulus is imposed on a pristine 13T film, the absorption and emission spectra change their features. These findings, along with the measurements with varying thicknesses of 13T films, suggest that a pristine 13T film is a mixture of two phases to be oxidized at separate potentials and that one phase can be switched to the other by the potential stimulation. A plausible model proposed for explaining these observations assumes that a key parameter characteristic of the two phases is a conformation of 13T molecules in the solid state and a change in conformation, leading to the shift of the redox potentials and the change of optical properties, is induced by electrochemical generation of bipolarons on the half units of the oligomers in the pristine 13T film.

Electrical Characteristics of Pentacene Films on Cross-Linked Polymeric Insulators of Varying Thicknesses.

Pentacene films vacuum-sublimed on a cross-linked polymeric insulator (CPVP-C6) prepared using poly(4-vinylphenol) (PVP) and 1,6-bis(trichlorosilyl)hexane (C6) were studied with a special concern on possible influences of the CPVP-C6 thickness on the electrical characteristics of the pentacene films. It was found that the conductivities of the pentacene films on a thin CPVP-C6 film (10 nm) were approximately 2 orders of magnitude higher than those on a glass substrate and increased slightly with the increase in the thickness of the underlying CPVP-C6 film. In addition, the X-ray diffraction measurements showed that the stacking structure of pentacene molecules was remarkably enhanced by increasing the thickness of the CPVP-C6 film, suggesting that the increase in conductivity is due, at least in part, to the improvement in carrier mobilities caused by the growth of large pentacene grains. An attempt to directly evaluate carrier mobilities using pentacene/CPVP-C6 field-effect transistors was made, and a seeming increase in the carrier mobilities observed with the increase in the CPVP-C6 thickness was ascribed to a hygroscopic nature of the CPVP-C6 film, which was evidenced by the capacitance and quartz crystal microbalance measurements. Possible reasons are discussed to explain the enhanced conductivities of the pentacene films on the increased thicknesses of CPVP-C6.

Influences of self-assembled structure on mobilities of charge carriers in pi-conjugated polymers.

Mobilities of charge carriers in cast and spun films of poly(3-hexylthiophene)s (PHTs) with regioregularities of 97%, 81%, 70%, and 54% (denoted as PHT97%, PHT81%, PHT70%, and PHT54%, respectively) are evaluated as a function of doping level. A common feature of mobility vs doping level plots for all the PHT films is that the mobility decreases initially with the increase of the doping level and then starts to rise drastically at ca. 1% doping level. No large mobility difference is observed between cast and spun films of each PHT. In contrast, the difference in regioregularity of PHT resulted in a large mobility difference, especially in the low doping regime. At the highest doping levels of ca. 20%, the apparent mobility values reach 0.4 and 0.01 cm(2) V(-1) s(-1) for the cast films of PHT97% and PHT54%, respectively. These features of the mobility plots are discussed in connection with self-assembled structures of PHT films studied by electrochemical, in-situ ESR, in-situ UV-vis-NIR, and X-ray diffraction measurements. It is concluded first that mobilities of polarons are mainly controlled by the rate of an interchain charge hopping and second that the evolution of metallic conduction featured by the sharp mobility increase is irrelevant to the interchain stacking, or rather governed by an intrachain route.

Preparation of 4,4-diaryl-2-(tricyanoethenyl)dithienosiloles and vapor-chromic behavior of the film.

[reaction: see text] Reactions of 4,4-diphenyl- and 4,4-di(p-tolyl)dithienosilole with tetracyanoethene (TCNE) in DMF gave coupling products 4,4-diphenyl- and 4,4-di(p-tolyl)-2-(tricycanoethenyl)dithienosilole (1a and 1b) in good yield. The films of 1b exhibited vapor-chromism, and the color of the film changed from red to blue-purple upon exposure to the vapor of organic solvents such as ethanol, methanol, acetonitrile, ethyl acetate, acetone, and hexane. The color reverted to the original red upon contact with chloroform vapor, indicating that this process is reversible.