Approaching Sustainable Lithium-Ion Batteries through Voltage-Responsive Smart Prelithiation Separator with Surface-Engineered Sacrificial Lithium Agents.

The surge in lithium-ion batteries has heightened concerns regarding metal resource depletion and the environmental impact of spent batteries. Battery recycling has become paramount globally, but conventional techniques, while effective at extracting transition metals like cobalt and nickel from cathodes, often overlook widely used spent LiFePO4 due to its abundant and low-cost iron content. Direct regeneration, a promising approach for restoring deteriorated cathodes, is hindered by practicality and cost issues despite successful methods like solid-state sintering. Hence, a smart prelithiation separator based on surface-engineered sacrificial lithium agents is proposed. Benefiting from the synergistic anionic and cationic redox, the prelithiation separator can intelligently release or intake active lithium via voltage regulation. The staged lithium replenishment strategy was implemented, successfully restoring spent LiFePO4's capacity to 163.7 mAh g-1 and a doubled life. Simultaneously, the separator can absorb excess active lithium up to approximately 600 mAh g-1 below 2.5 V to prevent over-lithiation of the cathode This innovative, straightforward, and cost-effective strategy paves the way for the direct regeneration of spent batteries, expanding the possibilities in the realm of lithium-ion battery recycling.

Potential Controllable Redox Couple for Mild and Efficient Lithium Recovery from Spent Batteries.

The prosperity of the lithium-ion battery market is dialectically accompanied by the depletion of corresponding resources and the accumulation of spent batteries. It is an urgent priority to develop green and efficient battery recycling strategies for helping ease resources and environmental pressures at the current stage. Here, we propose a mild and efficient lithium extracting strategy based on potential controllable redox couples. Active lithium in the spent battery without discharging is extracted using a series of tailored aprotic solutions comprised of polycyclic aromatic hydrocarbons and ethers. This ensures a safe yet efficient recycling process with nearly ≈100 % lithium recovery. We further investigate the Li+ -electron concerted redox reactions and the effect of solvation structure on kinetics during the extraction, and broaden the applicability of the Li-PAHs solution. This work can stimulate new inspiration for designing novel solutions to meet efficient and sustainable demands in recycling batteries.

Mitigating Electron Leakage of Solid Electrolyte Interface for Stable Sodium-Ion Batteries.

The interfacial stability is highly responsible for the longevity and safety of sodium ion batteries (SIBs). However, the continuous solid-electrolyte interphase(SEI) growth would deteriorate its stability. Essentially, the SEI growth is associated with the electron leakage behavior, yet few efforts have tried to suppress the SEI growth, from the perspective of mitigating electron leakage. Herein, we built two kinds of SEI layers with distinct growth behaviors, via the additive strategy. The SEI physicochemical features (morphology and componential information) and SEI electronic properties (LUMO level, band gap, electron work function) were investigated elaborately. Experimental and calculational analyses showed that, the SEI layer with suppressed growth delivers both the low electron driving force and the high electron insulation ability. Thus, the electron leakage is mitigated, which restrains the continuous SEI growth, and favors the interface stability with enhanced electrochemical performance.

Selective Extraction of Transition Metals from Spent LiNix Coy Mn1-x-y O2 Cathode via Regulation of Coordination Environment.

The complexity of chemical compounds in lithium-ion batteries (LIBs) results in great difficulties in the extraction of multiple transition metals, which have similar physicochemical characteristics. Here, we propose a novel strategy for selective extraction of nickel, cobalt, and manganese from spent LiNix Coy Mn1-x-y O2 (NCM) cathode through the regulation of coordination environment. Depending on adjusting the composition of ligand in transition metal complexes, a tandem leaching and separation system is designed and finally enables nickel, cobalt, and manganese to enrich in the form of NiO, Co3 O4 , and Mn3 O4 with high recovery yields of 99.1 %, 95.1 %, and 95.3 %, respectively. We further confirm that the combination of different transition metals with well-designed ligands is the key to good selectivity. Through our work, fine-tuning the coordination environment of metal ions is proved to have great prospects in the battery recycling industry.

Competitive Doping Chemistry for Nickel-Rich Layered Oxide Cathode Materials.

Chemical modification of electrode materials by heteroatom dopants is crucial for improving storage performance in rechargeable batteries. Electron configurations of different dopants significantly influence the chemical interactions inbetween and the chemical bonding with the host material, yet the underlying mechanism remains unclear. We revealed competitive doping chemistry of Group IIIA elements (boron and aluminum) taking nickel-rich cathode materials as a model. A notable difference between the atomic radii of B and Al accounts for different spatial configurations of the hybridized orbital in bonding with lattice oxygen. Density functional theory calculations reveal, Al is preferentially bonded to oxygen and vice versa, and shows a much lower diffusion barrier than BIII . In the case of Al-preoccupation, the bulk diffusion of BIII is hindered. In this way, a B-rich surface and Al-rich bulk is formed, which helps to synergistically stabilize the structural evolution and surface chemistry of the cathode.

Boosting Sodium Compensation Efficiency via a CNT/MnO2 Catalyst toward High-Performance Na-Ion Batteries.

The formation of a solid electrolyte interphase on carbon anodes causes irreversible loss of Na+ ions, significantly compromising the energy density of Na-ion full cells. Sodium compensation additives can effectively address the irreversible sodium loss but suffer from high decomposition voltage induced by low electrochemical activity. Herein, we propose a universal electrocatalytic sodium compensation strategy by introducing a carbon nanotube (CNT)/MnO2 catalyst to realize full utilization of sodium compensation additives at a much-reduced decomposition voltage. The well-organized CNT/MnO2 composite with high catalytic activity, good electronic conductivity, and abundant reaction sites enables sodium compensation additives to decompose at significantly reduced voltages (from 4.40 to 3.90 V vs Na+/Na for sodium oxalate, 3.88 V for sodium carbonate, and even 3.80 V for sodium citrate). As a result, sodium oxalate as the optimal additive achieves a specific capacity of 394 mAh g-1, almost reaching its theoretical capacity in the first charge, increasing the energy density of the Na-ion full cell from 111 to 158 Wh kg-1 with improved cycle stability and rate capability. This work offers a valuable approach to enhance sodium compensation efficiency, promising high-performance energy storage devices in the future.

Bismuth-doping boosting Na+ diffusion kinetics of layered oxide cathode with radially oriented {010} active lattice facet for sodium-ion batteries.

O3-type layered oxide cathodes (NaxTMO2) for sodium-ion batteries (SIBs) have attracted significant attention as one of the most promising potential candidates for practical energy storage applications. The poor Na+ diffusion kinetics is, however, one of the major obstacles to advancing large-scale practical application. Herein, we report bismuth-doped O3-NaNi0.5Mn0.5O2 (NMB) microspheres consisting of unique primary nanoplatelets with the radially oriented {010} active lattice facets. The NMB combines the advantages of the oriented and exposed electrochemical active planes for direct paths of Na+ diffusion, and the thick primary nanoplatelets for less surface parasitic reactions with the electrolyte. Consequently, the NMB cathode exhibits a long-term stability with an excellent capacity retention of 72.5% at 1C after 300 cycles and an enhanced rate capability at a 0.1C to 10C rate (1C = 240 mA g-1). Furthermore, the enhancement is elucidated by the small volume change, thin cathode-electrolyte-interphase (CEI) layer, and rapid Na+ diffusion kinetics. In particular, the radial orientation-based Bi-doping strategy is demonstrated to be effective at boosting electrochemical performance in other layered oxides (such as Bi-doped NaNi0.45Mn0.45Ti0.1O2 and NaNi1/3Fe1/3Mn1/3O2). The results provide a promising strategy of utilizing the advantages of the oriented active facets of primary platelets and secondary particles to develop high-rate layered oxide cathodes for SIBs.

Layered Oxide Cathode-Electrolyte Interface towards Na-Ion Batteries: Advances and Perspectives.

With the ever increasing demand for low-cost and economic sustainable energy storage, Na-ion batteries have received much attention for the application on large-scale energy storage for electric grids because of the worldwide distribution and natural abundance of sodium element, low solvation energy of Na+ ion in the electrolyte and the low cost of Al as current collectors. Starting from a brief comparison with Li-ion batteries, this review summarizes the current understanding of layered oxide cathode/electrolyte interphase in NIBs, and discusses the related degradation mechanisms, such as surface reconstruction and transition metal dissolution. Recent advances in constructing stable cathode electrolyte interface (CEI) on layered oxide cathode are systematically summarized, including surface modification of layered oxide cathode materials and formulation of electrolyte. Urgent challenges are detailed in order to provide insight into the imminent developments of NIBs.