RESUMO
The self-organised conical needles produced by plasma etching of silicon (Si), known as black silicon (b-Si), create a form-birefringent surface texture when etching of Si orientated at angles of θi < 50 - 70° (angle between the Si surface and vertical plasma E-field). The height of the needles in the form-birefringent region following 15 min etching was d â¼ 200 nm and had a 100 µm width of the optical retardance/birefringence, characterised using polariscopy. The height of the b-Si needles corresponds closely to the skin-depth of Si â¼λ/4 for the visible spectral range. Reflection-type polariscope with a voltage-controlled liquid-crystal retarder is proposed to directly measure the retardance Δn × d/λ ≈ 0.15 of the region with tilted b-Si needles. The quantified form birefringence of Δn = -0.45 over λ = 400 - 700 nm spectral window was obtained. Such high values of Δn at visible wavelengths can only be observed in the most birefringence calcite or barium borate as well as in liquid crystals. The replication of b-Si into Ni-shim with high fidelity was also demonstrated and can be used for imprinting of the b-Si nanopattern into other materials.
RESUMO
The nanoscale composition of silk defining its unique properties via a hierarchial structural anisotropy needs to be analysed at the highest spatial resolution of tens of nanometers corresponding to the size of fibrils made of ß-sheets, which are the crystalline building blocks of silk. Nanoscale optical and structural properties of silk have been measured from 100 nm thick longitudinal slices of silk fibers with ca. 10 nm resolution, the highest so far. Optical sub-wavelength resolution in hyperspectral mapping of absorbance and molecular orientation were carried out for comparison at IR wavelengths of 2-10 µm using synchrotron radiation. A reliable distinction of transmission changes by only 1-2% as the anisotropy of amide bands was obtained from nanometer-thin slices of silk.
RESUMO
Birefringence of 3 × 10 - 3 is demonstrated inside cross-sectional regions of 100 µ m, inscribed by axially stretched Bessel-beam-like fs-laser pulses along the c-axis inside sapphire. A high birefringence and retardance of λ / 4 at mid-visible spectral range (green) can be achieved using stretched beams with axial extension of 30-40 µ m. Chosen conditions of laser-writing ensure that there are no formations of self-organized nano-gratings. This method can be adopted for creation of polarization optical elements and fabrication of spatially varying birefringent patterns for optical vortex generation.
RESUMO
Polariscopy is demonstrated using hyperspectral imaging with a focal plane array (FPA) detector in the infrared (IR) spectral region under illumination by thermal and synchrotron light sources. FPA Fourier-transform IR (FTIR) imaging microspectroscopy is useful for monitoring real time changes at specific absorption bands when combined with a high brightness synchrotron source. In this study, several types of samples with unique structural motifs were selected and used for assessing the capability of polariscopy under this FPA-FTIR imaging technique. It was shown that the time required for polariscopy at IR wavelengths can be substantially reduced by the FPA-FTIR imaging approach. By using natural and laser fabricated polymers with sub-wavelength features, alignment of absorbing molecular dipoles and higher order patterns (laser fabricated structures) were revealed. Spectral polariscopy at the absorption peaks can reveal the orientation of sub-wavelength patterns (even when they are not spatially resolved) or the orientation of the absorbing dipoles.
RESUMO
Polarised light imaging microscopy, with the addition of a liquid crystal (LC) phase retarder, was used to determine the birefringence of silk fibres with high (â¼1 µm) spatial resolution. The measurement was carried out with the silk fibres (the optical slow axis) and the slow axis of the LC-retarder set at parallel angles. The direct fit of the transmission data allowed for high fidelity determination of the birefringence Δn ≈ 1.63 × 10-2 (with â¼2% uncertainty) of the brown silk fibre, (Antheraea pernyi) averaged over the wavelength range λ = (425-625) nm. By measuring retardance at four separate wavelengths, it was possible to determine the true value of the birefringence of a thicker sample when an optical path may include a large number of wavelengths. The numerical procedures and required hardware are described for the do-it-yourself assembly of the imaging polariscope at a fractional budget compared to commercial units.