Investigation of the formation of furfural compounds in apple products treated with pasteurization and high pressure processing.

The thermal treatment carried out in the processing of apple products is very likely to induce Maillard reaction to produce furfurals, which have raised toxicological concerns. This study aimed to elucidate the formation of furfural compounds in apple products treated with pasteurization and high pressure processing (HPP). The method for simultaneous determination of five furfural compounds including 5-hydroxymethyl-2-furfural (5-HMF), furfural (F), 4-hydroxy-2,5-dimethyl-3(2H)-furanone (HDMF), 2-acetylfuran (FMC), and 5-Methyl-2-furfural (MF) using high performance liquid chromatography equipped with diode array detector (HPLC-DAD) was successfully developed and validated. All five furfurals exhibited an increasing trend after the pasteurization treatment of apple clear juice, cloudy juice, and puree. 5-HMF, F, FMC, and MF were increased significantly during the precooking of apple puree. Whereas there was no significant change in the furfurals formation after apple products treated with high pressure processing (HPP) with 300 MPa and 15 min. Based on the variation of the fructose, glucose and sucrose detected in apple products after thermal treatment, it revealed that the saccharides and thermal treatment have great effect on the furfural compounds formation. The commercial fruit juice samples with different treatments and fruit puree samples treated with pasteurization were also analyzed. Five furfurals were detected more frequently in the fruit juice samples treated with pasteurization or ultra-high temperature instantaneous sterilization (UHT) than those treated with HPP. 5-HMF and FMC were detected in all fruit puree samples treated with pasteurization, followed by F, MF, and HDMF with the detection rate of 79.31 %, 72.41 %, and 51.72 %. The results could provide a reference for risk assessment of furfural compounds and dietary guidance of fruit products for human, especially for infants and young children. Moreover, moderate HPP treatment with 300 MPa and 15 min would be a worthwhile alternative processing technology in the fruit juice and puree production to reduce the formation of furfural compounds.

Determination of chlordimeform and its metabolite residue in milk by gas chromatography-tandem mass spectrometry.

Herein, the determination of chlordimeform and its metabolite 4-chloro-2-methylaniline residue in milk was performed for the first time using gas chromatography-tandem mass spectrometry (GC-MS/MS). Samples were extracted using acetonitrile, and cleaned using a quick, easy, cheap, effective, rugged, and safe (QuEChERS) method. Separation was performed using the DB-17 MS column. It was detected in a selected reaction monitoring (SRM) mode and quantified using a matrix-matched isotope internal standard method. Under optimal conditions, a good linear relationship was observed in the concentration range of 10-200 µg/kg. The limit of quantitation was 10.0 µg/kg. The spiked recoveries for the target substance ranged from 84.5 % to 107.3 %, with relative standard deviations (RSD) of <7.2 %. The spiked samples were further confirmed by gas chromatography-quadrupole-Orbitrap high-resolution mass spectrometry (GC-Orbitrap HRMS). The combined method resulted in high accuracy and sensitivity and was suitable for the determination of chlordimeform and its metabolite 4-chloro-2-methylaniline residue in milk.

A commercially viable solution process to control long-chain branching in polyethylene.

In polyolefins, long-chain branching is introduced through an energy-intensive, high-pressure radical process to form low-density polyethylene (LDPE). In the current work, we demonstrated a ladder-like polyethylene architecture through solution polymerization of ethylene and less than 1 mole % of α,ω-dienes, using a dual-chain catalyst. The ladder-branching mechanism requires catalysts with two growing polymer chains on the same metal center, thus enchaining the diene without the requirement of a steady-state concentration of pendant vinyl groups. Molecular weight distributions lacking a high-molecular weight tail, distinctive Mark-Houwink signatures, nuclear magnetic resonance characterization, and shear and extensional rheology consistent with highly branched polyethylene architectures are described. This approach represents an industrially viable solution-polymerization process capable of producing controlled long-chain branched polyethylene with rheological properties comparable to those of LDPE or its blends with linear low-density polyethylene (LLDPE).

Determining nine fasciolicides and three metabolite residues in milk and infant formula using solid-phase extraction and liquid chromatography-tandem mass spectrometry.

A new sensitive method of liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis for nine fasciolicides (closantel, rafoxanide, oxyclozanide, niclosamide, nitroxinil, ioxynil, 4-nitro-3-(trifluoromethyl)phenol, salicylanilide, and triclabendazole) and three metabolite residues (ketotriclabnedazole, triclabendazole sulfone, and triclabendazole sulfoxide) in milk and infant formula was established. The samples were extracted and purified through solid-phase extraction and analyzed using LC-MS/MS. The proposed method demonstrated high accuracy (the average recoveries ranged from 70.5 % to 107.4 %) and high sensitivity (the limits of quantification ranged from 1.0 to 25.0 µg/kg). This method was successfully applied to determine nine fasciolicides and three metabolite residues in 45 milk and infant formula, providing technical support for the safety and quality evaluation of dairy products.