Construction of MXene/Bi2WO6 Schottky Junction for Highly Efficient Piezocatalytic Hydrogen Evolution and Unraveling Mechanism.

For the first time, a series of MXene (Ti3C2Tx)/Bi2WO6 Schottky junction piezocatalysts were constructed, and the piezocatalytic hydrogen evolution activity was explored. Optimal Ti3C2Tx/Bi2WO6 exhibits the highest piezocatalytic hydrogen evolution rate of 764.4 µmol g-1 h-1, which is nearly 8 times higher than that of pure Ti3C2Tx and twice as high as that of Bi2WO6. This value also surpasses that of most recently reported typical piezocatalysts. Moreover, related experimental results and density functional theory calculations reveal that Ti3C2Tx/Bi2WO6 can provide unique channels for efficient electron transfer, enhance piezoelectric properties, optimize the adsorption Gibbs free energy of water, reduce activation energy for hydrogen atoms, endow robust separation capacity of charge carrier, and restrict the electron-hole recombination rate, thus significantly promoting the efficiency of hydrogen evolution reaction. Ultimately, we have unraveled an innovative piezocatalytic mechanism. This work broadens the scope of MXene materials in a sustainable energy piezocatalysis application.

Structure and Defect Engineering of V3S4-xSex Quantum Dots Confined in a Nitrogen-Doped Carbon Framework for High-Performance Sodium-Ion Storage.

Constructing quantum dot-scale metal sulfides with defects and strongly coupled with carbon is significant for advanced sodium-ion batteries (SIBs). Herein, Se substituted V3S4 quantum dots with anionic defects confined in nitrogen-doped carbon matrix (V3S4-xSex/NC) are fabricated. Introducing element Se into V3S4 crystal expands the interlayer distance of V3S4, and triggers anionic defects, which can facilitate Na+ diffusions and act as active sites for Na+ storage. Meanwhile, the quantum dots tightly encapsulated by conductive carbon framework improve the stability and conductivity of the electrode. Theoretical calculations also unveil that the presence of Se enhances the conductivity and Na+ adsorption ability of V3S4-xSex. These properties contribute to the V3S4-xSex/NC with high specific capacity of 447 mAh g-1 at 0.2 A g-1, and prominent rate and cyclic performance with 504 mAh g-1 after 1000 cycles at 10 A g-1. The sodium-ion hybrid capacitors (SIHCs) with V3S4-xSex/NC anode and activated carbon cathode can achieve high energy/power density (maximum 144 Wh kg-1/5960 W kg-1), capacity retention ratio of 71% after 4000 cycles at 2 A g-1. This work not only synthesizes V3S4-xSex/NC, but also provides a promising opportunity for designing quantum dots and utilizing defects to improve the electrochemical properties.

Artificial Surface Electron Network Prompted Energy Band Structure Tuning: Boosting Solar-to-Hydrogen Evolution Performance.

The energy gap and conduction band position of catalysts play crucial roles in solar-to-hydrogen (STH) transformation technology. Unfortunately, although an increase in the conduction band position can effectively promote the photoreduction capacity of the photocatalyst, it will inevitably widen the band gap, thus reducing the light-absorption scale. It seems that there is a contradiction between the reduction of band gap and the improvement of conduction band position, which is that "You can't have your cake and eat it too." Herein, an ultrasimple molecular adsorption strategy was engineered by adsorbing hydrazine hydrate on the surface of TiO2. The theoretical and experimental results indicated that the strong electron-donating effect of amino groups in hydrazine hydrate can promote the redistribution of photogenerated electrons and form surface electron networks on the surface of TiO2 photocatalysts, which can bend the conduction band upward and significantly improve its photoreduction ability. Besides, the adsorption of -NH2 can narrow the band gap width of TiO2 and promote the separation efficiency of photogenerated carriers. More interestingly, it can also effectively enhance the adsorption of H2O and H+, thus greatly elevating the STH efficiency. The STH rate of the as-prepared T-N-3 can be increased by ≈530%. This work sheds light on a new approach for resolving the contradiction between photoreduction and light absorption capabilities to effectively enhance photocatalytic performance.

Strongly Coupled Heterostructured CoP/MoO2 as an Advanced Electrocatalyst for Urea-Assisted Water Electrolysis.

Developing low-cost electrocatalysts with excellent activity and durability in urea-assisted water splitting is urgently needed in order to achieve sustainable hydrogen production. Herein, we in situ synthesized a robust coupled heterostructured electrocatalyst (CoP/MoO2) on a nickel foam (NF) substrate and explored its electrocatalytic performances in the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and urea oxidation reaction (UOR). The overpotential of CoP/MoO2/NF is found to be only 11 mV at 10 mA cm-2 during the HER process, which is significantly lower than that of commercial Pt/C. Meanwhile, the UOR catalytic performance of CoP/MoO2/NF indicates fast reaction kinetics, along with a considerable low driving potential (1.26 V) compared to that of the OER (1.51 V). In situ and ex situ techniques demonstrate that these excellent electrocatalytic properties are mainly ascribed to the effective synergistic coupled effect and strong electronic interactions between single-component CoP and MoO2, which can tune electronic states of Co and Mo, expose more active sites, enhance intrinsic catalytic activity, and accelerate charge transfer. Moreover, when used in electrochemical overall water splitting and urea-assisted water electrolysis, CoP/MoO2/NF can reach a current density of 10 mA cm-2 at only 1.46 and 1.32 V. This outperforms Pt/C||RuO2 and numerous nonprecious metal electrocatalysts and maintains a stable long-term electrolytic operation for 84 h. This work provides a promising pathway for the development of efficient catalysts during urea-assisted water electrolysis for hydrogen production.

Sulfur-Bridged Bonds Heightened Na-Storage Properties in MnS Nanocubes Encapsulated by S-Doped Carbon Matrix Synthesized via Solvent-Free Tactics for High-Performance Hybrid Sodium Ion Capacitors.

The exploitation of electrode materials with ability to balance capacity and kinetics between cathode and anode is a challenge for sodium-ion hybrid capacitors (SIHCs). Mn-based anode materials are limited by poor electrical conductivity, sluggish reaction kinetics, large volume variation, weak cycling stability, and inferior reversible capacity. Herein, MnS nanocubes encapsulated in S-doped porous carbon matrix (MSC) with strong sulfur-bridged bond interactions (CSMn) are successfully synthesized by solvent-free tactics. The CSMn bonds generated between MnS and carbon significantly inhibit the aggregation of nanostructural MnS cubes, restrict the volume expansion, and stabilize the nanostructure, which improves the Na+ storage reversibility and stability. Moreover, S-doped porous carbon enhances the electrical conductivity and electrons/ions diffusion rate, which boosts a fast kinetic reaction. As expected, MSC anode presents an outstanding reversible capacity of 600 mAh g-1 at 0.2 A g-1 and a long-term stable capacity of 357 mAh g-1 for 1000 cycles at a high current density of 10 A g-1 in sodium-ion batteries (SIBs). The as-assembled SIHCs deliver a high energy density of 109 W h kg-1 and a high power output of 98 W kg-1 , with 88% capacity retention at 2 A g-1 after 2000 cycles and practical applications (55 LEDs can be lighted for 10 min).

In Situ Construction of MnO2-Co3O4 Nanosheet Heterojunctions on Co@NCNT Surfaces for Oxygen Evolution.

Electrocatalytic water splitting is still circuitous and controversial because of the lack of highly active electrocatalysts to decrease the overpotential. Herein, we report a feasible method for constructing heterojunctions of MnO2-Co3O4 nanosheets on Co@NCNT support surfaces (MnO2-Co3O4/Co@NCNT) by spontaneous redox reactions. Experimental results indicate that Co embedded in Co@NCNT can be used as the carbon support and anchoring sites for heterojunctions, thus exposing a large number of active sites, adjusting the surface electronic structure, changing the OER rate-determining step of the catalyst, and reducing the reaction energy barrier. Besides, the in situ formation of MnO2-Co3O4 nanosheets on Co@NCNT inhibits the loss and aggregation of the catalyst, leading to robust structural stability. Therefore, the synergistic effects of these factors provide multi-functional active sites to enhance the intrinsic activity and achieve maximum catalytic performances. To deliver a current density of 10 mA cm-2, the catalyst of MnO2-Co3O4/Co@NCNT achieves an overpotential (η) of 303 mV in 1.0 M KOH media for OER. This simple redox strategy can be easily extended to prepare other ultrathin transition-metal oxide heterojunctions, which could be applied not only for water splitting but also for other energy conversion and storage technologies.

Acceleration of Photocatalytic CO2 Reduction at Intimate Interface in AgBr/BiOBr Heterojunctions via a Co-anion Strategy.

Constructing heterojunctions with strong interfacial interactions can accelerate the transfer and separation of photogenerated charge carriers. However, finding a simple strategy to construct tightly connected heterojunctions remains a major challenge. In this work, AgBr/BiOBr S-scheme heterojunctions were designed via a straightforward co-anionic strategy without using a solvent. The experimental results indicate that the AgBr/BiOBr heterojunction with a close contact interface can extend the use of visible light, accelerate the separation, and induce the transfer of photoelectrons and holes while maintaining an excellent redox capacity. Undoubtedly, the photocatalytic reduction rate of carbon dioxide to carbon monoxide by 1.0 AgBr/BiOBr is 87.73 µmol·g-1·h-1 (quantum efficiency is 0.57%), which is 12.15 times and 4.45 times higher than that of pure AgBr and BiOBr, respectively. The present work provides insights into a simple strategy for the preparation of strongly interacting interfacial heterojunctions for photocatalytic CO2 reduction.

Construction of an Advanced NiFe-LDH/MoS2-Ni3S2/NF Heterostructure Catalyst toward Efficient Electrocatalytic Overall Water Splitting.

Developing high-efficiency, low-cost, and earth-abundant electrocatalysts toward the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) is highly desirable for boosting the energy efficiency of water splitting. Herein, we adopted an interfacial engineering strategy to enhance the overall water splitting (OWS) activity via constructing a bifunctional OER/HER electrocatalyst combining MoS2-Ni3S2 with NiFe layered double hydroxide (NiFe-LDH) on a nickel foam substrate. The NiFe-LDH/MoS2-Ni3S2/NF electrocatalyst delivers superior OER/HER activity and stability, such as low overpotentials (220 and 79 mV for OER and HER at current densities of 50 and 10 mA cm-2, respectively) and a low Tafel slope. This excellent electrocatalytic performance mainly benefits from the electronic structure modulation and synergistic effects between NiFe-LDH and MoS2-Ni3S2, which provides a high electrochemical activity area, more active sites, and strong electron interaction. Furthermore, the assembly of NiFe-LDH/MoS2-Ni3S2/NF into a two-electrode system only requires an ultra-low cell voltage of 1.50 V at a current density of 10 mA cm-2 and exhibits outstanding stability with a decay of current density of only 2.11% @50 mA cm-2 after 50 h, which is far superior to numerous other reported transition metal NiFe-LDH and MoS2-Ni3S2-based as well as RuO2||Pt-C electrocatalysts. This research highlights the rational design of heterostructures to efficiently advance electrocatalysis for water splitting applications.

Boosting the Photocatalytic Activity and Resistance of Photostability of ZnS Nanoparticles.

Defects play a vital role in improving photocatalytic performance. However, the specific influence mechanism of sulfur defects (DSS) on sulfide photocatalytic performance and stability is still unclear. In this work, an ingenious solvent-free self-overflow strategy is designed to introduce DSS into ZnS nanoparticles and explore the specific promotion mechanism of photocatalytic performance and photostability. The results indicate that the introduced DSS in ZnS nanoparticles can simultaneously boost the photocatalytic hydrogen production (PHE) performance and photostability of ZnS: the PHE rate of the defective ZnS can increase up to 21350.23 µmol·h-1·g-1, which is roughly 4.7 times higher than that of pristine ZnS. Both experiments and theoretical calculationsshow that the enhanced photocatalytic performance could be attributed to the change of energy band position after introducing DSS. Specifically, the introduction of DSS can raise the conduction band (CB) position of ZnS to enhance the reducing ability of photogenerated electrons. Besides, the valence band (VB) position can also be raised to boost the light absorption ability of ZnS and restrain the photocorrosion by weakening the oxidation capacity of the photogenerated holes. The ingenious strategy and interesting mechanism in this job provide a simple artful tactic to fabricate other defective sulfide photocatalysts and open up a particular path to promote the photostability of the photocatalysts.

In Situ Replacement Synthesis of Co@NCNT Encapsulated CoPt3 @Co2 P Heterojunction Boosting Methanol Oxidation and Hydrogen Evolution.

Simultaneous boosting electrochemical methanol oxidation reaction (MOR) for direct methanol fuel cells and production of hydrogen is meaningful but challenging. Herein, a sea urchin-shaped cobalt-embedded N-doped carbon nanotubes (Co@NCNT) encapsulated CoPt3 @Co2 P heterojunction (CoPt3 @Co2 P/Co@NCNT) is fabricated. Theoretical calculations confirm that electrons at the interfaces transfer from CoPt3 to Co2 P, where electron hole region on CoPt3 is beneficial to improving the MOR activity, whereas accumulation region on Co2 P favors to the optimization of H2 O and H* absorption energies for hydrogen evolution reaction (HER). Benefitting from its interfacial electronic reconfiguration, the CoPt3 @Co2 P/Co@NCNT heterojunction exhibits excellent electrocatalytic performances for MOR and HER, in which the mass activity (2981 mA mgPt -1 ) for MOR is 14.2 times than that of Pt/C (20%), and the smallest overpotentials only requires 19 mV to deliver a current density of 10 mA cm-2 for HER. Moreover, the electrolyzer employing CoPt3 @Co2 P/Co@NCNT for anodic MOR and cathodic H2 production only requires a low voltage of 1.43 V at 10 mA cm-2 with impressive long-life cycling stability, which is obviously better than that of commercial Pt/C//RuO2 . This study offers a novel strategy for other organics oxidation reaction coupled with HER catalyzed production of hydrogen.

Insights into Crystal Facets of Perovskite SrSnO3 as High-Performance Photocatalysts toward Environmental Remediation.

To gain in-depth insights into the relevant exposed crystal planes for the photocatalytic performance of perovskite-structured oxides, SrSnO3 nanocrystals with different microstructures were synthesized and their photocatalytic activity for the degradation of simulated dye was investigated. The as-obtained orthorhombic SrSnO3 nanorods with exposed {001} crystal planes showed higher photocatalytic activity for decomposing methylene blue than that of SrSnO3 nanoribbons with exposed {111} crystal planes. The surface atomic configurations revealed that the quantity of SnO2 overlayer on the {001} crystal facets is slightly greater than that on {111} crystal planes, which results in exposed {001} crystal facets of the SrSnO3 nanorods that can exhibit better activity in the photocatalytic process, due to fewer lattice defects, which act as traps for photogenerated charge carriers to decrease the recombination of photoexcited electrons and holes. This originated from narrowing of the crystal face distance and slight variation of the unit cell parameters; the crystallographic axis became shorter and the value of lattice strain became smaller. As a result, SrSnO3 nanocrystals exhibited different surface behavior under post-treatment conditions and exhibited variation in the photocatalytic properties. The findings reported herein highlight the importance of probing the properties of surface facets in the evaluation of the photocatalytic performance of ternary metal oxides.

Scalable synthesis of Bi2O2S nanoplates with large piezoelectric potential induced by a built-in electric field in a [Bi2O2]2+ layer for the degradation of organic contaminants.

2D piezoelectric catalysts with strong piezoresponse and high piezoelectric potential have valuable applications in catalytic degradation of organic pollutants and antibiotics, but the development of novel nanomaterials with powerful piezopotential still remains a serious challenge. Bismuth oxysulfide (Bi2O2S) nanosheets possessing large piezoelectric potentials were prepared using a low-heating solid-state chemical reaction and used for the first time for piezoelectric catalysis in this work. Moreover, Bi2O2S nanosheets can degrade pollutants universally, and the degradation efficiencies of methyl blue and rhodamine B are as high as 97.7% and 92.9% within 60 min under ultrasonication, respectively, which is superior to most piezoelectric materials reported in the literature.

Engineering sulfur defective Bi2S3@C with remarkably enhanced electrochemical kinetics of lithium-ion batteries.

Introducing the appropriate vacancies to augment the active sites and improve the electrochemical kinetics while maintaining high cyclability is a major challenge for its widespread application in electrochemical energy storage. Here, core-shell structured Bi2S3@C with sulfur vacancies was prepared by hydrothermal method and one-step carbonization/sulfuration process, which significantly improves the intrinsic electrical conductivity and ion transport efficiency of Bi2S3. Additionally, the uniform protective carbon layer around surface of composite maintains structural stability and effectively alleviates volume expansion during alloying/dealloying. As a result, the BSC-500 anode exhibits a brilliant reversible capacity of 636 mAh/g at 0.2 A/g and a long-term stable capacity of 524 mAh/g for 500 cycles at a high current density of 3 A/g in lithium-ion batteries. In addition, the assembled Bi2S3@C//LiCoO2 full cell delivered a capacity of 184 mAh/g at 1 A/g and excellent cyclability (125 mAh/g after 1000 cycles). The proposed strategy of combining sulfur vacancies with a core-shell structure to improve the electrochemical kinetics of Bi2S3 in lithium-ion batteries off the prospect for practical applications of transition metal sulfide anodes.

Oxygen Self-Doping Bi2S3@C Spheric Successfully Enhanced Long-Term Performance in Lithium-Ion Batteries.

High theoretical capacity of Bi2S3 propels it toward an ideal anode material for lithium-ion batteries (LIBs); however, rapid capacity attenuation and poor long-term stability are major barriers to widespread application. In this work, an oxygen self-doping strategy was utilized to synthesize O-Bi2S3@C, significantly increasing the amount of active sites for lithium-ion storage. Meanwhile, sulfur vacancies were formed to improve the electrical conductivity and ionic transport efficiency, enhance the long-term stability, and accelerate the electrochemical kinetics of Bi2S3@C. O-BSC-S1:3 anode exhibits a reversible capacity of 673.1 mAh g-1 at 0.2 A g-1. It retains a long-term capacity of 596.3 mAh g-1 over 1100 cycles at a high density of 3 A g-1 in LIBs. Moreover, the installed O-Bi2S3@C//LiCoO2 full battery offers exceptional reversible capacity and remarkable cyclability (325.2 mAh g-1 after 200 cycles) at 0.2 A g-1. The combined strategy of oxygen self-doping and sulfur vacancy effectively enhances the reversible capacity and cycling life of Bi2S3, providing an approach for the design of high-performance transition metal sulfide anodes for LIBs.

Construction of WS2/NC@C nanoflake composites as performance-enhanced anodes for sodium-ion batteries.

The development of layered metal sulfides with stable structure and accessible active sites is of great importance for sodium-ion batteries (SIBs). Herein, a simple liquid-mixing method is elaborately designed to immobilize WS2 nanoflakes on N-doped carbon (NC), then further coat carbon to produce WS2/NC@C. In the formation process of this composite, the presence of NC not only avoids the overlap and improves the dispersion of WS2 nanoflakes, but also creates a connection network for charge transfer, where the wrapped carbon provides a stable chemical and electrochemical reaction interface. Thus, the composite of WS2/NC@C exhibits the desired Na+ storage capacity as anticipated. The reversible capacity reaches the high value of 369.8 mA h g-1 at 0.2 A g-1 after 200 cycles, while excellent rate performances and cycle life are also acquired in that capacity values of 256.7 and 219.6 mA h g-1 at 1 and 5 A g-1 are preserved after 1000 cycles, respectively. In addition, the assembled sodium-ion hybrid capacitors (SIHCs, AC//WS2/NC@C) exhibit an energy/power density of 68 W h kg-1 at 64 W kg-1, and capacity retention of 82.9% at 1 A g-1 after 2000 cycles. The study provides insight into developing layered metal sulfides with eminent performance of Na+ storage.

Ce-regulating defect and morphology engineering for efficiently enhancing the piezocatalytic performances of BiOBr.

Cerium-doped bismuth oxybromide (1%, 5% and 10% Ce-BiOBr) piezocatalysts were synthesized. The piezocatalytic activity was efficiently regulated by defect and morphology engineering. Among them, the 5% Ce-BiOBr exhibits the highest piezocatalytic hydrogen production property with an evolution rate of 1147.6 µmol g-1 h-1, nearly twice that of the original BiOBr. Additionally, the MO dye degradation efficiency of 5% Ce-BiOBr reaches 91.9% within 60 min, with a higher reaction kinetic constant (0.0376 min-1) that was 6.1 times larger than that of pure BiOBr. These outstanding performances of 5% Ce-BiOBr surpass those of most other piezocatalytic material systems.

2D heterostructural Mn2O3 quantum dots embedded N-doped carbon nanosheets with strongly stable interface enabling high-performance sodium-ion hybrid capacitors.

The ingenious architectural structural engineering is extensively identified as a cogent means for facilitating the electrochemical properties of conversion-type anode materials for sodium-ion storage. Herein, a delicate, scalable and controllable solvent-free strategy is proposed to synthesize ultrafine Mn2O3 quantum dots embedded into N-doped carbon to generate two-dimensional (2D) composites (MNC) with robust interfacial heterostructural interactions for high sodium ion storage and fast reaction kinetics, which averts the use of solvents and environmental pollution, greatly reduces time and production costs. The introduction of metallic Mn species simultaneously achieves the construction of ultrafine Mn2O3 quantum dots and strong interfacial heterostructural COMn bonds between metal species and 2D N-doped carbon matrix. The synergistic effect of the formation of oxide quantum dots, the combination of 2D N-doped carbon and the construction of robust interfacial interactions provides the stable electrode structure, fast reaction kinetics and high electrochemical storage capability of anode materials. Hence, MNC composites in SIBs convey remarkable reversible rate capability. Its superior capacity reaches 215 mAh g-1 for 50 cycles at 0.2 A g-1 and 155 mAh g-1 for 1000 cycles at a high current density of 5 A g-1, which shows good long-term stability. The assembled sodium-ion hybrid capacitors (SIHCs) device delivers outstanding energy density of 138 Wh kg-1 at a power density of 126 W kg-1 and 98% capacity retention after 2000 cycles at 2 A g-1, and tremendous capability for practical applications (69 LEDs can be easily lighted). This work not merely offers guidance for the rational interfacial engineering design of high-capacity Mn-based electrode materials in a feasible and scalable solvent-free tactics for Na+ storage, but also broadens the routes for projecting a better electrode material for other battery systems.

Rational design of CdS/BiOCl S-scheme heterojunction for effective boosting piezocatalytic H2 evolution and pollutants degradation performances.

Piezocatalysis as an emerging technology is broadly applied in hydrogen evolution and organic pollutants degradation aspects. However, the dissatisfactory piezocatalytic activity is a severe bottleneck for its practical applications. In this work, CdS/BiOCl S-scheme heterojunction piezocatalysts were constructed and explored the performances of piezocatalytic hydrogen (H2) evolution and organic pollutants degradation (methylene orange, rhodamine B and tetracycline hydrochloride) under strain by ultrasonic vibration. Interestingly, CdS/BiOCl presents a volcano-type relationship between catalytic activity and CdS contents, namely firstly increases and then decreases with the increase of CdS content. Optimal 20 % CdS/BiOCl endows superior piezocatalytic H2 generation rate of 1048.2 µmol g-1h-1 in methanol solution, which is 2.3 and 3.4 times higher than that of pure BiOCl and CdS, respectively. This value is also much higher than the recently reported Bi-based and most of other typical piezocatalysts. Meanwhile, 5 % CdS/BiOCl delivers the highest reaction kinetics rate constant and degradation rate toward various pollutants compared with other catalysts, which also exceeds that of the previously numerous results. Improved catalytic capacity of CdS/BiOCl is mainly ascribed to the construction of S-scheme heterojunction for enhancing the redox capacity as well as inducing more effective charge carriers separation and transfer. Moreover, S-scheme charge transfer mechanism is demonstrated via electron paramagnetic resonance and Quasi-In-situ X-ray photoelectron spectroscopy measurements. Eventually, a novel piezocatalytic mechanism of CdS/BiOCl S-scheme heterojunction has been proposed. This research develops a novel pathway for designing highly efficient piezocatalysts and provides a deeper understanding in construction of Bi-based S-scheme heterojunction catalysts for energy conservation and wastewater disposal applications.

Construction of oxygen vacancies and heterostructure in VO2-x/NC with enhanced reversible capacity, accelerated redox kinetics, and stable cycling life for sodium ion storage.

Developing anode materials with high reversible capacity, fast redox kinetics, and stable cycling life for Na+ storage remains a great challenge. Herein, the VO2 nanobelts with oxygen vacancies supported on nitrogen-doped carbon nanosheets (VO2-x/NC) were developed. Benefitting from the enhanced electrical conductivity, the accelerated kinetics, the increased active sites as well as the constructed 2D heterostructure, the VO2-x/NC delivered extraordinary Na+ storage performance in half/full battery. Theoretical calculations (DFT) demonstrated that oxygen vacancies could regulate the adsorption ability for Na+, enhance electronic conductivity, as well as achieve rapid and reversible Na+ adsorption/desorption. The VO2-x/NC exhibited high Na+ storage capacity of 270 mAh g-1 at 0.2 A g-1, and impressive cyclic stability with 258 mAh g-1 after 1800 cycles at 10 A g-1. The assembled sodium-ion hybrid capacitors (SIHCs) could achieve maximum energy density/power output of 122 Wh kg-1/9985 W kg-1, ultralong cycling life with 88.4% capacity retention after 25,000 cycles at 2 A g-1, and practical applications (55 LEDs could be actuated for 10 min), promising to be utilized in a practicable Na+ storage.

Insight into the effect of OH modification on the piezo-photocatalytic hydrogen production activity of SrTiO3.

Surface modification by hydrophilic functional group have a tremendous influence on the catalytic activity of photocatalyst, however, there are few reports on improving piezoelectric catalytic performance through surface functionalization. Herein, OH-modified SrTiO3 was successfully obtained via a novel low-temperature solid-state precursor method and employed as a catalyst for photocatalytic, piezocatalytic and piezo-photocatalytic hydrogen production. Thanks to the super hydrophilic that is facilitating the contact of catalyst and water molecular and the more oxygen vacancies that can promote electron-hole separation, the photocatalytic, piezocatalytic and piezo-photocatalytic hydrogen generation of OH-modified SrTiO3 (OH-STO) is about two times higher than pristine SrTiO3 (STO). It is worth mentioning that the optimal piezo-photocatalytic hydrogen evolution rate of OH-STO (701.2 µmol h-1 g-1) is 5.3 times higher than the photocatalytic hydrogen evolution process of STO. This study presents a low-energy approach to the rational design of functional group modification nanomaterials that possess excellent piezo-photocatalytic performance.