RESUMO
Silicon photonic-based refractive index sensors are of great value in the detection of gases, biological and chemical substances. Among them, microring resonators are the most promising due to their compact size and narrow Lorentzian-shaped spectrum. The electric field in a subwavelength grating waveguide (SWG) is essentially confined in the low-refractive index dielectric, favoring enhanced analyte-photon interactions, which represents higher sensitivity. However, it is very challenging to further significantly improve the sensitivity of SWG ring resonator refractive index sensors. Here, a hybrid waveguide blocks double slot subwavelength grating microring resonator (HDSSWG-MRR) refractive index sensor operating in a water refractive index environment is proposed. By designing a new waveguide structure, a sensitivity of up to 1005 nm/RIU has been achieved, which is 182 nm/RIU higher than the currently highest sensitivity silicon photonic micro ring refractive index sensor. Meanwhile, utilizing a unique waveguide structure, a Q of 22,429 was achieved and a low limit of detection of 6.86 × 10-5 RIU was calculated.
RESUMO
Two-terminal self-rectifying (SR)-synaptic memristors are preeminent candidates for high-density and efficient neuromorphic computing, especially for future three-dimensional integrated systems, which can self-suppress the sneak path current in crossbar arrays. However, SR-synaptic memristors face the critical challenges of nonlinear weight potentiation and steep depression, hindering their application in conventional artificial neural networks (ANNs). Here, a SR-synaptic memristor (Pt/NiOx/WO3-x:Ti/W) and cross-point array with sneak path current suppression features and ultrahigh-weight potentiation linearity up to 0.9997 are introduced. The image contrast enhancement and background filtering are demonstrated on the basis of the device array. Moreover, an unsupervised self-organizing map (SOM) neural network is first developed for orientation recognition with high recognition accuracy (0.98) and training efficiency and high resilience toward both noises and steep synaptic depression. These results solve the challenges of SR memristors in the conventional ANN, extending the possibilities of large-scale oxide SR-synaptic arrays for high-density, efficient, and accurate neuromorphic computing.
RESUMO
Optical biosensors support disease diagnostic applications, offering high accuracy and sensitivity due to label-free detection and their optical resonance enhancement. However, optical biosensors based on noble metal nanoparticles and precise micro-electromechanical system technology are costly, which is an obstacle for their applications. Here, we proposed a biosensor reuse method with nanoscale parylene C film, taking the silicon-on-insulator microring resonator biosensor as an example. Parylene C can efficiently adsorb antibody by one-step modification without any surface treatment, which simplifies the antibody modification process of sensors. Parylene C (20 nm thick) was successfully coated on the surface of the microring to modify anti-carcinoembryonic antigen (anti-CEA) and specifically detect CEA. After sensing, parylene C was successfully removed without damaging the sensing surface for the sensor reusing. The experimental results demonstrate that the sensing response did not change significantly after the sensor was reused more than five times, which verifies the repeatability and reliability of the reusable method by using parylene C. This framework can potentially reduce the cost of biosensors and promote their further applications.
Assuntos
Técnicas Biossensoriais , Silício , Polímeros , Regeneração , Reprodutibilidade dos Testes , XilenosRESUMO
Circular dichroism spectroscopy is frequently used to characterize the chiral biomolecules by measuring the absorption spectra contrast between the left-handed circularly polarized light and the right-handed circularly polarized light. Compared with biomolecules, chiral metal plasmonic nanostructures also produce a strong circular dichroism response in the range of near-infrared. However, due to the large damping rate, the non-adjustable resonant frequency of the conventional metals, the applications of chiral metal plasmonic nanostructures in the fields of photoelectric detection and chemical and biochemical sensing are restricted. Here, we present a chiral graphene plasmonic Archimedes' spiral nanostructure that displays a significant circular dichroism response under the excitation of two polarizations of circularly polarized light. By manipulating the material and geometric parameters of the Archimedes' spiral, the stronger circular dichroism responses and modulation of the resonant wavelength are achieved. The optimized plasmonic nanostructure has outstanding refractive index sensing performance, where the sensitivity and figure of merit reach 7000nm/RIU and 68.75, respectively. Our proposed chiral graphene plasmonic Archimedes' spiral nanostructure might find potential applications in the fields of optical detection and high performance of index sensing.
RESUMO
We propose and experimentally demonstrate an apodized bidirectional grating coupler for high-efficiency, perfectly vertical coupling. Through grating apodization, the coupling efficiency (CE) can be notably improved, and the parasitic reflections can be minimized. For ease of fabrication, subwavelength gratings are introduced, which are also beneficial for the coupling performance. Simulation shows a record CE of 72%. We found that the coupler is quite robust to the variation of incidence mode field diameter and fiber misalignment. A CE of -1.8 dB is experimentally measured with a 1-dB bandwidth of 37 nm.
RESUMO
Tungsten-based memristors possess many advantages as candidates for memristive devices, including gradual changes in resistance states and memorization and learning functions. However, most previous reports mainly focus on studying synaptic learning rules instead of analysing the internal mechanism that results in the exterior learning rules. Herein, we discuss stacked Au/WTiOx/Au and Ti/WTiOx/Au devices in which the function of the resistance switch is realized by the externally induced local migration of oxygen ions. The consecutively adjustable multilevel resistance of the Au/WTiOx/Au device may be due to the variation in the barrier width and height in high oxygen vacancy concentrations. Additionally, the high and low resistance states of Ti/WTiOx/Au devices are considered as a result of the connection and rupture of the conductive filaments at low concentrations of oxygen vacancies. The physical mechanism construction and state-full synapse development through the control of ion migration provide insight into the applications of oxide-based memristors in neuromorphic computation.
RESUMO
Reduced graphene oxide (rGO) has been studied as a resistive ammonia gas sensor at room temperature. The sensitive hybrid material composed of rGO and nano-silver ink (Ag-ink) was loaded on a microstrip patch antenna to realize high-performance wireless ammonia sensors. The material was investigated using scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Firstly, interdigital electrodes (IDEs) printed on the polyethylene terephthalate (PET) by direct printing were employed to measure the variation of resistance of the sensitive material with the ammonia concentration. The results indicated the response of sensor varied from 4.25% to 14.7% under 15-200 ppm ammonia concentrations. Furthermore, the hybrid material was loaded on a microstrip patch antenna fabricated by a conventional printed circuit board (PCB) process, and a 10 MHz frequency shift of the sensor antenna could be observed for 200 ppm ammonia gas. Finally, the wireless sensing property of the sensor antenna was successfully tested using the same emitted antenna outside the gas chamber with a high gain of 5.48 dBi, and an increased reflection magnitude of the emitted antenna due to the frequency mismatch of the sensor antenna was observed. Therefore, wireless ammonia gas sensors loaded on a patch antenna have significant application prospects in the field of Internet of Things (IoTs).
RESUMO
Crystal engineering using passivation to reduce perovskite defects is crucial to improving the quality of perovskite crystals and optoelectronic properties. Because of their unique properties, metal-organic framework materials have been used as an emerging and effective passivator for perovskite materials and optoelectronic devices. This paper focuses on the differences in the optoelectronic properties of zeolite imidazolium ester framework materials (ZIF-11 & ZIF-23) doped with different conjugated ring ligands for perovskite photodetectors. This paper proposes a simple and effective method to dope zeolite imidazolium ester framework nanoparticles (ZIF-11 & ZIF-23) into organic-inorganic perovskite MAPbI3 films. The crystalline quality of the perovskite films was improved after doping with ZIF-11 and ZIF-23. Meanwhile, the performance of the planar photoconductive devices was significantly improved. The photoresponsivity of the photodetector doped with ZIF-23 was 0.185A/W, and the detectivity was 4.22 × 1012 Jones. The photoresponsivity of the photodetector doped with ZIF-23 was 0.164 A/W, and the detectivity was 3.27 × 1012 Jones. The devices maintained long-time operational stability, operating without significant degradation for 480 s under the 1.2 V bias voltage operating condition. In addition, we observed a significant suppression of the ion migration process in ZIF-23 for a voltage-controlled ion migration process. The potential application of perovskite and MOF heterojunction materials for image information acquisition and storage is demonstrated.
RESUMO
Sensitive, accurate, and straightforward biosensors are pivotal in the battle against Alzheimer's disease, particularly in light of the escalating patient population. These biosensors enable early adjunctive diagnosis, thereby facilitating prompt intervention, alleviating socioeconomic burdens, and preserving individual well-being. In this study, we introduce the development of a highly sensitive add-drop dual-microring resonant microfluidic sensing chip boasting a sensitivity of 188.11 nm/RIU, marking a significant 20.7% enhancement over single microring systems. Leveraging ultra-thin Parylene C for streamlined antibody immobilization and non-destructive removal, this platform facilitates the precise quantification of the Alzheimer's disease biomarker Aß42. Employing an immune sensing strategy that amplifies and captures antigen signals using Au-labeled antibodies, we achieve an exceptional limit of detection of 9.02 pg/mL. The designed microring-based microfluidic biosensor chip exhibits outstanding specificity and sensitivity for Aß42 in serum samples, offering a promising avenue for the early adjunctive diagnosis of Alzheimer's disease.
Assuntos
Peptídeos beta-Amiloides , Técnicas Biossensoriais , Fragmentos de Peptídeos , Peptídeos beta-Amiloides/análise , Peptídeos beta-Amiloides/sangue , Técnicas Biossensoriais/métodos , Humanos , Fragmentos de Peptídeos/sangue , Fragmentos de Peptídeos/análise , Fragmentos de Peptídeos/imunologia , Doença de Alzheimer/diagnóstico , Doença de Alzheimer/sangue , Limite de Detecção , Dispositivos Lab-On-A-Chip , Técnicas Analíticas Microfluídicas/instrumentação , Técnicas Analíticas Microfluídicas/métodos , Anticorpos Imobilizados/imunologia , Anticorpos Imobilizados/química , Ouro/químicaRESUMO
Exosomes are becoming more widely acknowledged as significant circulating indicators for the prognosis and diagnosis of cancer. Circulating exosomes are essential to the development and spread of cancer, according to a growing body of research. Using existing technology, characterizing exosomes is quite difficult. Therefore, a direct, sensitive, and targeted approach to exosome detection will aid in illness diagnosis and prognosis. The review discusses the new strategies for exosome isolation and detection technologies from microfluidic chips to nanoplasmonic biosensors, analyzing the advantages and limitations of these new technologies. This review serves researchers to better understand exosome isolation and detection methods and to help develop better exosome isolating and detecting devices for clinical applications.
RESUMO
We proposed and demonstrated a novel optical modulator based on a bidirectional grating coupler designed for perfectly vertical fiber coupling. The grating functions as the fiber coupler and 3-dB splitter. To observe the interference, an arm difference of 30µm is introduced. As a result of the high coupling efficiency and near perfect split ratio of the grating coupler, this device exhibits a low on-chip insertion loss of 5.4dB (coupling loss included) and high on-off extinction ratio more than 20dB. The modulation efficiency is estimated to be within 3-3.84Vâ¢cm. In order to investigate the fiber misalignment tolerance of this modulator, misalignment influence of the static characteristics is analyzed. 10Gb/s Data transmission experiments of this device are performed with different fiber launch positions. The energy efficiency is estimated to be 8.1pJ/bit.
Assuntos
Tecnologia de Fibra Óptica/instrumentação , Refratometria/instrumentação , Telecomunicações/instrumentação , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
A high-efficiency photodetector consisting of colloidal PbS quantum dots (QDs) and single-layer graphene was prepared in this research. In the early stage, PbS QDs were synthesized and characterized, and the results showed that the product conformed with the characteristics of high-quality PbS QDs. Afterwards, the photodetector was derived through steps, including the photolithography and etching of indium tin oxide (ITO) electrodes and the graphene active region, as well as the spin coating and ligand substitution of the PbS QDs. After application testing, the photodetector, which was prepared in this research, exhibited outstanding properties. Under visible and near-infrared light, the highest responsivities were up to 202 A/W and 183 mA/W, respectively, and the highest detectivities were up to 2.24 × 1011 Jones and 2.47 × 108 Jones, respectively, with light densities of 0.56 mW/cm2 and 1.22 W/cm2, respectively. In addition to these results, the response of the device and the rise and fall times for the on/off illumination cycles showed its superior performance, and the fastest response times were approximately 0.03 s and 1.0 s for the rise and fall times, respectively. All the results illustrated that the photodetector based on PbS and graphene, which was prepared in this research, possesses the potential to be applied in reality.
RESUMO
Artificial synapses with the capability of optical sensing and synaptic functions are fundamental components to construct neuromorphic visual systems. However, most reported artificial optical synapses require a combination of optical and electrical stimuli to achieve bidirectional synaptic conductance modulation, leading to an increase in the processing time and system complexity. Here, an all-optically controlled artificial synapse based on the graphene/titanium dioxide (TiO2) quantum dot heterostructure is reported, whose conductance could be reversibly tuned by the effects of light-induced oxygen adsorption and desorption. Synaptic behaviors, such as excitatory and inhibitory, short-term and long-term plasticity, and learning-forgetting processes, are implemented using the device. An artificial neural network simulator based on the artificial synapse was used to train and recognize handwritten digits with a recognition rate of 92.2%. Furthermore, a 5 × 5 optical synaptic array that could simultaneously sense and memorize light stimuli was fabricated, mimicking the sensing and memory functionality of the retina. Such an all-optically controlled artificial synapse shows a promising prospect in the application of perception, learning, and memory tasks for future neuromorphic visual systems.
RESUMO
We propose and numerically demonstrate an 800 Gbps silicon photonic transmitter with sub-decibel surface-normal optical interfaces. The silicon photonic transmitter is composed of eight silicon Mach-Zehnder optical modulators and an interleaved AMMI WDM device. This WDM device comprises two 1 × 4 angled MMI and a Mach-Zehnder interferometer (MZI) optical interleaver with an apodized bidirectional grating which has about -0.5 dB coupling loss. Both the Mach-Zehnder electro-optical modulators and MZI optical interleaver regard the bidirectional grating coupler as vertical optical coupler and 3-dB power splitter/combiner. By importing the S-parameter matrices of all the components which have been carefully designed in simulation software, the circuit-level model of the optical transmitter can be built up. On this basis, the static and dynamic performance characterization were carried out numerically. For NRZ modulation, the optical transmitter exhibits the overall optical loss of 4.86-6.72 dB for eight wavelength channels. For PAM4 modulation, the optical loss is about 0.5 dB larger than that of NRZ modulation, which varies between 5.38-7.27 dB. From the eye diagram test results, the WDM silicon photonic transmitter can achieve single channel data transmission at 100 Gb/s NRZ data or 50 GBaud/s PAM4 symbol rate with acceptable bit error rate.
RESUMO
Artificial synapses based on biological synapses represent a new idea in the field of artificial intelligence with future applications. Current two-terminal RRAM devices have developed tremendously due to the adjustable synaptic plasticity of artificial synapses. However, these devices still have some problems, such as current leakage and poor durability. Here, we demonstrate a Pt/NiOx/WO3-x:Ti/W memristor with a pn-type heterojunction and two metal-semiconductor contacts, which exhibits good rectification. Due to the change in the internal potential barrier, the devices possess multiconductance states under different pulse modulations and memory characteristics, similar to synapses. The rectification characteristics of the device exhibit stable enhancement and suppression behavior. Each device in the 10 × 10 cross array we constructed can be written correctly, which verifies that leakage current does not appear in the device. The structure proposed in this work has great significance for the integration of large-scale memristor cross arrays.
Assuntos
Níquel/química , Óxidos/química , Platina/química , Titânio/química , Tungstênio/química , SemicondutoresRESUMO
The valley degree of freedom, like the spin degree of freedom in spintronics, is regarded as a new information carrier, promoting the emerging valley photonics. Although there exist topologically protected valley edge states which are immune to optical backscattering caused by defects and sharp edges at the inverse valley Hall phase interfaces composed of ordinary optical dielectric materials, the dispersion and the frequency range of the edge states cannot be tuned once the geometrical parameters of the materials are determined. In this paper, we propose a chirped valley graphene plasmonic metamaterial waveguide composed of the valley graphene plasmonic metamaterials (VGPMs) with regularly varying chemical potentials while keeping the geometrical parameters constant. Due to the excellent tunability of graphene, the proposed waveguide supports group velocity modulation and zero group velocity of the edge states, where the light field of different frequencies focuses at different specific locations. The proposed structures may find significant applications in the fields of slow light, micro-nano-optics, topological plasmonics, and on-chip light manipulation.
RESUMO
We propose a broadband high-efficiency grating coupler for perfectly vertical fiber-to-chip coupling. The up-reflection is reduced, hence enhanced coupling efficiency is achieved with the help of a Fabry-Perot-like cavity composed of a silicon nitride reflector and the grating itself. With the theory of the Fabry-Perot cavity, the dimensional parameters of the coupler are investigated. With the optimized parameters, up-reflection in the C-band is reduced from 10.6% to 5%, resulting in an enhanced coupling efficiency of 80.3%, with a 1-dB bandwidth of 58 nm, which covers the entire C-band. The minimum feature size of the proposed structure is over 219 nm, which makes our design easy to fabricate through 248 nm deep-UV lithography, and lowers the fabrication cost. The proposed design has potential in efficient and fabrication-tolerant interfacing applications, between off-chip light sources and integrated chips that can be mass-produced.
RESUMO
In this work, a bidirectional grating coupler for perfectly vertical coupling is proposed. The coupling efficiency is enhanced using a silicon nitride (Si3N4) layer above a uniform grating. In the presence of Si3N4 layer, the back-reflected optical power into the fiber is diminished and coupling into the waveguide is increased. Genetic algorithm (GA) is used to optimize the grating and Si3N4 layer simultaneously. The optimal design obtained from GA shows that the average in-plane coupling efficiency is enhanced from about 57.5% (-2.5 dB) to 68.5% (-1.65 dB), meanwhile the average back-reflection in the C band is reduced from 17.6% (-7.5 dB) to 7.4% (-11.3 dB). With the help of a backside metal mirror, the average coupling efficiency and peak coupling efficiency are further increased to 87% (-0.6 dB) and 89.4% (-0.49 dB). The minimum feature size of the designed device is 266 nm, which makes our design easy to fabricate through 193 nm deep-UV lithography and lowers the fabrication cost. In addition, the coupler proposed here shows a wide-band character with a 1-dB bandwidth of 64 nm and 3-dB bandwidth of 96 nm. Such a grating coupler design can provide an efficient and cost-effective solution for vertical fiber-to-chip optical coupling of a Wavelength Division Multiplexing (WDM) application.
RESUMO
A 4 × 25 Gb/s ultrawide misalignment tolerance wavelength-division-multiplex (WDM) transmitter based on novel bidirectional vertical grating coupler has been demonstrated on complementary metal-oxide-semiconductor (CMOS)-compatible silicon-on-insulator (SOI) platform. Simulations indicate the bidirectional grating coupler (BGC) is widely misalignment tolerant, with an excess coupling loss of only 0.55 dB within ±3 µm fiber misalignment range. Measurement shows the excess coupling loss of the BGC is only 0.7 dB within a ±2 µm fiber misalignment range. The bidirectional grating structure not only functions as an optical coupler, but also acts as a beam splitter. By using the bidirectional grating coupler, the silicon optical modulator shows low insertion loss and large misalignment tolerance. The eye diagrams of the modulator at 25 Gb/s don't show any obvious deterioration within the waveguide-direction fiber misalignment ranger of ±2 µm, and still open clearly when the misalignment offset is as large as ±4 µm.
RESUMO
A metal-catalyst-free method for the direct growth of patterned graphene on an insulating substrate is reported in this paper. Parylene N is used as the carbon source. The surface molecule layer of parylene N is cross-linked by argon plasma bombardment. Under high-temperature annealing, the cross-linking layer of parylene N is graphitized into nanocrystalline graphene, which is a process that transforms organic to inorganic and insulation to conduction, while the parylene N molecules below the cross-linking layer decompose and vaporize at high temperature. Using this technique, the direct growth of a graphene film in a large area and with good uniformity is achieved. The thickness of the graphene is determined by the thickness of the cross-linking layer. Patterned graphene films can be obtained directly by controlling the patterns of the cross-linking region (lithography-free patterning). Graphene-silicon Schottky junction photodetectors are fabricated using the as-grown graphene. The Schottky junction shows good performance. The application of direct-grown graphene in optoelectronics is achieved with a great improvement of the device fabrication efficiency compared with transferred graphene. When illuminated with a 792 nm laser, the responsivity and specific detectivity of the detector measured at room temperature are 275.9 mA/W and 4.93 × 109 cm Hz1/2/W, respectively.