Rechargeable Na/Cl2 and Li/Cl2 batteries.

Lithium-ion batteries (LIBs) are widely used in applications ranging from electric vehicles to wearable devices. Before the invention of secondary LIBs, the primary lithium-thionyl chloride (Li-SOCl2) battery was developed in the 1970s using SOCl2 as the catholyte, lithium metal as the anode and amorphous carbon as the cathode1-7. This battery discharges by lithium oxidation and catholyte reduction to sulfur, sulfur dioxide and lithium chloride, is well known for its high energy density and is widely used in real-world applications; however, it has not been made rechargeable since its invention8-13. Here we show that with a highly microporous carbon positive electrode, a starting electrolyte composed of aluminium chloride in SOCl2 with fluoride-based additives, and either sodium or lithium as the negative electrode, we can produce a rechargeable Na/Cl2 or Li/Cl2 battery operating via redox between mainly Cl2/Cl- in the micropores of carbon and Na/Na+ or Li/Li+ redox on the sodium or lithium metal. The reversible Cl2/NaCl or Cl2/LiCl redox in the microporous carbon affords rechargeability at the positive electrode side and the thin alkali-fluoride-doped alkali-chloride solid electrolyte interface stabilizes the negative electrode, both are critical to secondary alkali-metal/Cl2 batteries.

Shedding light on rechargeable Na/Cl2 battery.

Advancing new ideas of rechargeable batteries represents an important path to meeting the ever-increasing energy storage needs. Recently, we showed rechargeable sodium/chlorine (Na/Cl2) (or lithium/chlorine Li/Cl2) batteries that used a Na (or Li) metal negative electrode, a microporous amorphous carbon nanosphere (aCNS) positive electrode, and an electrolyte containing dissolved aluminum chloride and fluoride additives in thionyl chloride [G. Zhu et al., Nature 596, 525-530 (2021) and G. Zhu et al., J. Am. Chem. Soc. 144, 22505-22513 (2022)]. The main battery redox reaction involved conversion between NaCl and Cl2 trapped in the carbon positive electrode, delivering a cyclable capacity of up to 1,200 mAh g-1 (based on positive electrode mass) at a ~3.5 V discharge voltage [G. Zhu et al., Nature 596, 525-530 (2021) and G. Zhu et al., J. Am. Chem. Soc. 144, 22505-22513 (2022)]. Here, we identified by X-ray photoelectron spectroscopy (XPS) that upon charging a Na/Cl2 battery, chlorination of carbon in the positive electrode occurred to form carbon-chlorine (C-Cl) accompanied by molecular Cl2 infiltrating the porous aCNS, consistent with Cl2 probed by mass spectrometry. Synchrotron X-ray diffraction observed the development of graphitic ordering in the initially amorphous aCNS under battery charging when the carbon matrix was oxidized/chlorinated and infiltrated with Cl2. The C-Cl, Cl2 species and graphitic ordering were reversible upon discharge, accompanied by NaCl formation. The results revealed redox conversion between NaCl and Cl2, reversible graphitic ordering/amorphourization of carbon through battery charge/discharge, and probed trapped Cl2 in porous carbon by XPS.

Heteroatom-Coordinated Palladium Molecular Catalysts for Sustainable Electrochemical Production of Hydrogen Peroxide.

Currently, hydrogen peroxide (H2O2) manufacturing involves an energy-intensive anthraquinone technique that demands expensive solvent extraction and a multistep process with substantial energy consumption. In this work, we synthesized Pd-N4-CO, Pd-S4-NCO, and Pd-N2O2-C single-atom catalysts via an in situ synthesis approach involving heteroatom-rich ligands and activated carbon under mild reaction conditions. It reveals that palladium atoms interact strongly with heteroatom-rich ligands, which provide well-defined and uniform active sites for oxygen (O2) electrochemically reduced to hydrogen peroxide. Interestingly, the Pd-N4-CO electrocatalyst shows excellent performance for the electrocatalytic reduction of O2 to H2O2 via a two-electron transfer process in a base electrolyte, exhibiting a negligible amount of onset overpotential and >95% selectivity within a wide range of applied potentials. The electrocatalysts based on the activity and selectivity toward 2e- ORR follow the order Pd-N4-CO > Pd-N2O2-C > Pd-S4-NCO in agreement with the pull-push mechanism, which is the Pd center strongly coordinated with high electronegativity donor atoms (N and O atoms) and weakly coordinated with the intermediate *OOH to excellent selectivity and sustainable production of H2O2. According to density functional theory, Pd-N4 is the active site for selectivity toward H2O2 generation. This work provides an emerging technique for designing high-performance H2O2 electrosynthesis catalysts and the rational integration of several active sites for green and sustainable chemical synthesis via electrochemical processes.

Description of Photodegradation Mechanisms and Structural Characteristics in Carbon@Titania Yolk-Shell Nanostructures by XAS.

Carbon@titania yolk-shell nanostructures are successfully synthesized at different calcination conditions. These unique structure nanomaterials can be used as a photocatalyst to degrade the emerging water pollutant, acetaminophen (paracetamol). The photodegradation analysis studies have shown that the samples with residual carbon nanospheres have improved the photocatalytic efficiency. The local electronic and atomic structure of the nanostructures are analyzed by X-ray absorption spectroscopy (XAS) measurements. The spectra confirm that the hollow shell has an anatase phase structure, slight lattice distortion, and variation in Ti 3d orbital orientation. In situ XAS measurements reveal that the existence of amorphous carbon nanospheres inside the nano spherical shell inhibit the recombination of electron-hole pairs; more mobile holes are formed in the p-d hybridized bands near the Fermi surface and enables the acceleration of the carries that significantly enhance the photodegradation of paracetamol under UV-visible irradiation. The observed charge transfer process from TiO2  hybridized orbital to the carbon nanospheres reduces the recombination rate of electrons and holes, thus increasing the photocatalytic efficiency.

Generating Multi-Carbon Products by Electrochemical CO2 Reduction via Catalytically Harmonious Ni/Cu Dual Active Sites.

Despite the unique advantages of single-atom catalysts, molecular dual-active sites facilitate the C-C coupling reaction for C2 products toward the CO2 reduction reaction (CO2 RR). The Ni/Cu proximal dual-active site catalyst (Ni/Cu-PASC) is developed, which is a harmonic catalyst with dual-active sites, by simply mixing commercial Ni-phthalocyanine (Ni-Pc) and Cu-phthalocyanine (Cu-Pc) molecules physically. According to scanning transmission electron microscopy (STEM) and transmission electron microscopy (TEM) energy dispersive spectroscopy (EDS) data, Ni and Cu atoms are separated, creating dual-active sites for the CO2 RR. The Ni/Cu-PASC generates ethanol with an FE of 55%. Conversely, Ni-Pc and Cu-Pc have only detected single-carbon products like CO and HCOO- . In situ X-ray absorption spectroscopy (XAS) indicates that CO generation is caused by the stable Ni active site's balanced electronic state. The CO production from Ni-Pc consistently increased the CO concentration over Cu sites attributed to subsequent reduction reaction through a C-C coupling on nearby Cu. The CO bound (HCOO- ) peak, which can be found on Cu-Pc, vanishes on Ni/Cu-PASC, as shown by in situ fourier transformation infrared (FTIR). The characteristic intermediate of *CHO instead of HCOO- proves to be the prerequisite for multi-carbon products by electrochemical CO2 RR. The work demonstrates that the harmonic dual-active sites in Ni/Cu-PASC can be readily available by the cascading proximal active Ni- and Cu-Pc sites.

Efficient H2 Evolution Coupled with Anodic Oxidation of Iodide over Defective Carbon-Supported Single-Atom Mo-N4 Electrocatalyst.

We successfully prepared nitrogen-doped defective carbon spheres (Mo-N4/d-C) with a high loading of 0.996 wt % via a designed vapor-deposition process for IOR-based hydrogen generation. The synthesized Mo-N4/d-C catalyst provides a record current density of 10 mA cm-2 at 0.77 V. Further, the Mo-N4/d-C catalyst shows a Tafel slope of 25.58 mV dec-1, exceptional stability over time in acidic media, a higher hydrogen generation rate of 0.1063 mL gcat-1 min-1, a high Faradaic efficiency of 99.8%, and a reduction of the energy consumption up to ∼50% for hydrogen evolution by anodic oxidation reaction of iodide (IOR) compared with the conventional OER-based electrolysis. Computational calculations demonstrate that the Mo-N4/d-C structure plays a vital effect on the activity of iodide oxidation, which is competitive with the Pt catalyst.

High-Capacity Rechargeable Li/Cl2 Batteries with Graphite Positive Electrodes.

Developing new types of high-capacity and high-energy density rechargeable batteries is important to future generations of consumer electronics, electric vehicles, and mass energy storage applications. Recently, we reported ∼3.5 V sodium/chlorine (Na/Cl2) and lithium/chlorine (Li/Cl2) batteries with up to 1200 mAh g-1 reversible capacity, using either a Na or a Li metal as the negative electrode, an amorphous carbon nanosphere (aCNS) as the positive electrode, and aluminum chloride (AlCl3) dissolved in thionyl chloride (SOCl2) with fluoride-based additives as the electrolyte [Zhu et al., Nature, 2021, 596 (7873), 525-530]. The high surface area and large pore volume of aCNS in the positive electrode facilitated NaCl or LiCl deposition and trapping of Cl2 for reversible NaCl/Cl2 or LiCl/Cl2 redox reactions and battery discharge/charge cycling. Here, we report an initially low surface area/porosity graphite (DGr) material as the positive electrode in a Li/Cl2 battery, attaining high battery performance after activation in carbon dioxide (CO2) at 1000 °C (DGr_ac) with the first discharge capacity ∼1910 mAh g-1 and a cycling capacity up to 1200 mAh g-1. Ex situ Raman spectroscopy and X-ray diffraction (XRD) revealed the evolution of graphite over battery cycling, including intercalation/deintercalation and exfoliation that generated sufficient pores for hosting LiCl/Cl2 redox. This work opens up widely available, low-cost graphitic materials for high-capacity alkali metal/Cl2 batteries. Lastly, we employed mass spectrometry to probe the Cl2 trapped in the graphitic positive electrode, shedding light into the Li/Cl2 battery operation.

A Powerful Protocol Based on Anode-Free Cells Combined with Various Analytical Techniques.

Lithium (Li) metal is the ultimate negative electrode due to its high theoretical specific capacity and low negative electrochemical potential. However, the handling of lithium metal imposes safety concerns in transportation and production due to its reactive nature. Recently, anode-free lithium metal batteries (AFLMBs) have drawn much attention because of several of their advantages, including higher energy density, lower cost, and fewer safety concerns during cell production compared to LMBs. Pushing the reversible Coulombic efficiency (CE) of AFLMBs up to 99.98% is key to achieving their 80% capacity retention over more than 1000 cycles. However, interfacial irreversible phenomena such as electrolyte decomposition reactions on both electrodes, dead Li formation, and Li dendrite formation result in poor capacity retention and short circuits in LMBs and AFLMBs. Therefore, it is of great importance and scientific interest to explore those interfacial irreversible phenomena to improve the cell's cycle life. Although significant contributions toward mitigating electrolyte decomposition, dead lithium, and dendritic lithium formation have been reported at the lithium anode, real irreversible phenomena are usually hidden or difficult to discover due to excess lithium employed in LMBs and simultaneous events taking place in both electrodes or at the interfaces.An integrated protocol is suggested to include Li||Cu, cathode||Li, and cathode||Cu configurations to provide overall quantification and determination of various sources of irreversible Coulombic efficiency (irr-CE) in AFLMBs and LMBs. Combining Li||Cu, cathode||Li, and cathode||Cu configurations is essential for separating the root sources of the capacity loss and irr-CE in LMBs and AFLMBs. Remarkably, integrating an anode-free cell with various analytical techniques can serve as a powerful protocol to decouple and quantify those interfacial irreversible phenomena according to our recent reports.In this Account, we focus on the protocol based on an anode-free cell combined with various analytical methods to investigate interfacial irreversible phenomena. Complementary advanced tools such as transmission X-ray microscopy (visualizing Li plating/stripping mechanism), nuclear magnetic resonance spectroscopy (quantifying dead lithium), and gas chromatography-mass spectroscopy (decoupling interfacial reactions) were employed to extract the intrinsic reasons and sources of individual irreversible reactions in LMBs and AFLMBs. Quantitative evaluation of nucleation and growth of Li metal deposition are addressed, along with solid electrolyte interphase (SEI) fracture, visualization of lithium dendrite growth, decoupling of oxidative and reductive electrolyte decomposition mechanisms, and irreversible efficiency (i.e., dead Li and SEI formation) to reveal the intrinsic causes of individual irr-CE in AFLMBs. Meanwhile, an anode-free protocol can also be utilized as a powerful and multifunctional tool to develop electrolyte formulations or artificial layers for LMBs and AFLMBs. Therefore, we also suggest that the anode-free configurations with significant irreversible phenomena can effectively screen and develop new electrolytes. Finally, the concepts of the protocol with an anode-free cell combined with various advanced analytical tools can be extended to provide an in-depth understanding of other metal batteries and solid-state anode-free metal batteries.

An ultrafast rechargeable aluminium-ion battery.

The development of new rechargeable battery systems could fuel various energy applications, from personal electronics to grid storage. Rechargeable aluminium-based batteries offer the possibilities of low cost and low flammability, together with three-electron-redox properties leading to high capacity. However, research efforts over the past 30 years have encountered numerous problems, such as cathode material disintegration, low cell discharge voltage (about 0.55 volts; ref. 5), capacitive behaviour without discharge voltage plateaus (1.1-0.2 volts or 1.8-0.8 volts) and insufficient cycle life (less than 100 cycles) with rapid capacity decay (by 26-85 per cent over 100 cycles). Here we present a rechargeable aluminium battery with high-rate capability that uses an aluminium metal anode and a three-dimensional graphitic-foam cathode. The battery operates through the electrochemical deposition and dissolution of aluminium at the anode, and intercalation/de-intercalation of chloroaluminate anions in the graphite, using a non-flammable ionic liquid electrolyte. The cell exhibits well-defined discharge voltage plateaus near 2 volts, a specific capacity of about 70 mA h g(-1) and a Coulombic efficiency of approximately 98 per cent. The cathode was found to enable fast anion diffusion and intercalation, affording charging times of around one minute with a current density of ~4,000 mA g(-1) (equivalent to ~3,000 W kg(-1)), and to withstand more than 7,500 cycles without capacity decay.

An operando X-ray diffraction study of chloroaluminate anion-graphite intercalation in aluminum batteries.

We investigated rechargeable aluminum (Al) batteries composed of an Al negative electrode, a graphite positive electrode, and an ionic liquid (IL) electrolyte at temperatures down to -40 °C. The reversible battery discharge capacity at low temperatures could be superior to that at room temperature. In situ/operando electrochemical and synchrotron X-ray diffraction experiments combined with theoretical modeling revealed stable AlCl4-/graphite intercalation up to stage 3 at low temperatures, whereas intercalation was reversible up to stage 4 at room temperature (RT). The higher-degree anion/graphite intercalation at low temperatures affords rechargeable Al battery with higher discharge voltage (up to 2.5 V, a record for Al battery) and energy density. A remarkable cycle life of >20,000 cycles at a rate of 6C (10 minutes charge time) was achievable for Al battery operating at low temperatures, corresponding to a >50-year battery life if charged/discharged once daily.

Probing Single-Atom Catalysts and Catalytic Reaction Processes by Shell-Isolated Nanoparticle-Enhanced Raman Spectroscopy.

Developing advanced characterization techniques for single-atom catalysts (SACs) is of great significance to identify their structural and catalytic properties. Raman spectroscopy can provide molecular structure information, and thus, the technique is a promising tool for catalysis. However, its application in SACs remains a great challenge because of its low sensitivity. We develop a highly sensitive strategy that achieves the characterization of the structure of SACs and in situ monitoring of the catalytic reaction processes on them by shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) for the first time. Using the strategy, Pd SACs on different supports were identified by Raman spectroscopy and the nucleation process of Pd species from single atoms to nanoparticles was revealed. Moreover, the catalytic reaction processes of the hydrogenation of nitro compounds on Pd SACs were monitored in situ, and molecular insights were obtained to uncover the unique catalytic properties of SACs. This work provides a new spectroscopic tool for the in situ study of SACs, especially at solid-liquid interfaces.

High Coulombic efficiency aluminum-ion battery using an AlCl3-urea ionic liquid analog electrolyte.

In recent years, impressive advances in harvesting renewable energy have led to a pressing demand for the complimentary energy storage technology. Here, a high Coulombic efficiency (∼99.7%) Al battery is developed using earth-abundant aluminum as the anode, graphite as the cathode, and a cheap ionic liquid analog electrolyte made from a mixture of AlCl3 and urea in a 1.3:1 molar ratio. The battery displays discharge voltage plateaus around 1.9 and 1.5 V (average discharge = 1.73 V) and yielded a specific cathode capacity of ∼73 mAh g-1 at a current density of 100 mA g-1 (∼1.4 C). High Coulombic efficiency over a range of charge-discharge rates and stability over ∼150-200 cycles was easily demonstrated. In situ Raman spectroscopy clearly showed chloroaluminate anion intercalation/deintercalation of graphite (positive electrode) during charge-discharge and suggested the formation of a stage 2 graphite intercalation compound when fully charged. Raman spectroscopy and NMR suggested the existence of AlCl4-, Al2Cl7- anions and [AlCl2·(urea)n]+ cations in the AlCl3/urea electrolyte when an excess of AlCl3 was present. Aluminum deposition therefore proceeded through two pathways, one involving Al2Cl7- anions and the other involving [AlCl2·(urea)n]+ cations. This battery is a promising prospect for a future high-performance, low-cost energy storage device.

Nucleation and Growth Mechanism of Lithium Metal Electroplating.

Understanding the mechanism of Li nucleation and growth is essential for providing long cycle life and safe lithium ion batteries or lithium metal batteries. However, no quantitative report on Li metal deposition is available, to the best of our knowledge. We propose a model for quantitatively understanding the Li nucleation and growth mechanism associated with the solid-electrolyte interphase (SEI) formation, which we name the Li-SEI model. The current transients at various overpotentials initiate the nucleation and growth of Li metal on bare Cu foil. The Li-SEI model considering a three-dimensional diffusion-controlled instantaneous process (J3D-DC) with the simultaneous reduction of electrolyte decomposition (JSEI) due to the SEI fracture is employed for investigating the Li nucleation and growth mechanism. The individual contributions of experimental and theoretical transient states, i.e., the fundamental kinetic values of diffusion coefficient (D), rate of nucleation (N0), and rate constant of electrolyte decomposition (kSEI), can be determined from the Li-SEI model. Interestingly, JSEI increases with time, indicating that the current contributing from the electrolyte decomposition increases with time due to the SEI fracture upon Li deposition. Meanwhile, the kSEI increases with overpotential, indicating the SEI fracture is more serious at higher overpotential or higher growth rate. The kSEI is smaller in the electrolyte with fluoroethylene carbonate (FEC) additive, indicating that FEC additive can significantly suppress the SEI fracture during Li metal deposition. This proposed model opens a new way to quantitatively understand the Li nucleation and growth mechanism and electrolyte decomposition on various substrates or in different electrolytes.

In situ analytical techniques for battery interface analysis.

Lithium-ion batteries, simply known as lithium batteries, are distinct among high energy density charge-storage devices. The power delivery of batteries depends upon the electrochemical performances and the stability of the electrode, electrolytes and their interface. Interfacial phenomena of the electrode/electrolyte involve lithium dendrite formation, electrolyte degradation and gas evolution, and a semi-solid protective layer formation at the electrode-electrolyte interface, also known as the solid-electrolyte interface (SEI). The SEI protects electrodes from further exfoliation or corrosion and suppresses lithium dendrite formation, which are crucial needs for enhancing the cell performance. This review covers the compositional, structural and morphological aspects of SEI, both artificially and naturally formed, and metallic dendrites using in situ/in operando cells and various in situ analytical tools. Critical challenges and the historical legacy in the development of in situ/in operando electrochemical cells with some reports on state-of-the-art progress are particularly highlighted. The present compilation pinpoints the emerging research opportunities in advancing this field and concludes on the future directions and strategies for in situ/in operando analysis.

Nanostructured Ti07Mo03O2 as Efficient Non-Carbon Support for PtRu Catalysts in Direct Methanol Fuel Cells.

This study was focused on a new strategy by investigating whether the novel Ti0.7Mo0.3O2 material can be used as a conductive support for PtRu to prevent carbon corrosion and improve catalyst activity as the novel Ti0.7Mo0.3O2 support has some functional advantages. The 30 wt% PtRu/Ti0.7Mo0.3O2 catalyst showed the highest current density at the complete potential, which is approximately 12-fold and 1.4-fold higher than that of the commercial 20 wt% Pt/C (E-TEK) and 30 wt% PtRu/C (JM) catalysts, respectively, at 0.6 V (NHE) toward the methanol oxidation (MOR). Our data suggest that this enhancement is a result of the electronic Pt structure change upon its synergistic interaction with Ti0.7Mo0.3O2 support and the improved mass transport kinetics of PtRu/Ti0.7Mo0.3O2 compared to the carbon support (Pt or PtRu). The PtRu/Ti0.7Mo0.3O2 catalyst exhibited a much higher stability than carbon-supported catalysts because of the strong metal/support interactions between the Pt particles and Ti0.7Mo0.3O2, the inherent structural and chemical stability, and the corrosion resistance of the Ti0.7Mo0.3O2 in acidic and oxidative environments.

Sequentially surface modified hematite enables lower applied bias photoelectrochemical water splitting.

Hematite (α-Fe2O3) is a suitable candidate for photoelectrochemical water splitting due to its well-suited band structure, stability, and availability. However, water splitting using a low external potential is the major challenge that limits the practical application of hematite. Here, we achieve a very low onset potential using a sequential surface treatment approach to overcome two fundamental limiting factors, sluggish hole transfer, and interfacial recombination, independently. First, a heavily doped Fe2-xSnxO3 surface passivation layer was created by Sn4+ surface treatment which can robustly inhibit interfacial recombination. Then, an NiOOH catalyst layer was deposited that greatly enhances the charge transfer process across the passivated electrode/electrolyte interface. By exploiting this approach, the optimized sequentially treated photoanode (Fe2O3/Fe2-xSnxO3/NiOOH) exhibits a low photocurrent onset potential of 0.49 V vs. RHE and a saturated photocurrent density of 2.4 mA cm-2 V at 1.5 V vs. RHE. Transient photocurrent and impedance spectroscopy measurements further reveal that the combined Fe2-xSnxO3/NiOOH layers reduce interfacial recombination and enhance charge transfer across the electrode/electrolyte interface. The results provide convincing evidence that it is possible to address the problems of surface trap recombination and sluggish catalysis independently by employing surface passivation layers first and catalysts later sequentially.

In situ X-ray absorption near edge structure studies and charge transfer kinetics of Na6[V10O28] electrodes.

Polyoxometalates (POMs) have been reported as promising electrode materials for energy storage applications due to their ability to undergo fast redox reactions with multiple transferred electrons per polyanion. Here we employ a polyoxovanadate salt, Na6[V10O28], as an electrode material in a lithium-ion containing electrolyte and investigate the electron transfer properties of Na6[V10O28] on long and short timescales. Looking at equilibrated systems, in situ V K-edge X-ray absorption near edge structure (XANES) studies show that all 10 V5+ ions in Na6[V10O28] can be reversibly reduced to V4+ in a potential range of 4-1.75 V vs. Li/Li+. Focusing on the dynamic response of the electrode to potential pulses, the kinetics of Na6[V10O28] electrodes and the dependence of the fundamental electron transfer rate k0 on temperature are investigated. From these measurements we calculate the reorganization energy and compare it with theoretical predictions. The experimentally determined reorganization energy of λ = 184 meV is in line with the theoretical estimate and confirms the hypothesis of small values of λ for POMs due to electrostatic shielding of the redox center from the solvent.

The effect of ligand-ligand interactions on the formation of photoluminescent gold nanoclusters embedded in Au(i)-thiolate supramolecules.

In this study, we prepared photoluminescent l-cysteine (Cys)-capped gold nanoclusters (Cys-Au NCs) via NaBH4-mediated reduction of aggregated coordination polymers (supramolecules) of -[Cys-Au(i)]n-. The -[Cys-Au(i)]n- supramolecules with interesting chiral properties were formed through simple reactions of chloroauric acid (HAuCl4) with Cys at certain pH values (pH 3-7). The -[Cys-Au(i)]n- polymers could self-assemble into -[Cys-Au(i)]n- supramolecules with irregular morphologies and diameters larger than 500 nm through stacked hydrogen bonding and zwitterionic interactions between Cys ligands and through Au(i)Au(i) aurophilic interactions in solutions with pH values ≤7. The photoluminescent Au NCs (quantum yield = 11.6%) dominated by a Au13 core were embedded in -[Cys-Au(i)]n- supramolecules after NaBH4-mediated reduction. The optical and structural properties of Cys-Au NCs/-[Cys-Au(i)]n- nanocomposites were investigated, revealing that the interaction between Cys ligands plays a critical role in the self-assembly of -[Cys-Au(i)]n- supramolecules and in the formation of photoluminescent Cys-Au NCs embedded in the supramolecules. To further demonstrate that the photoluminescence properties and structures of the nanocomposites are mediated by the intermolecular forces of thiol ligands, other thiol ligands (l-penicillamine, l-homocysteine, 3-mercaptopropionic acid, and l-glutathione) and a ligand-crosslinking agent [bis(sulfosuccinimidyl) suberate; BS3] were used. We concluded that the electrostatic interactions, hydrogen bonding and steric effects dominate the polymer self-assembly into thiol-ligand-Au(i) supramolecules and thus the formation of Au NCs. Our study provides insights into the bottom-up synthesis of photoluminescent Au NCs from thiol-ligand-Au(i) complexes, polymers, and supramolecules. The hybrid Au NCs/-[Cys-Au(i)]n- nanocomposites can potentially be employed as drug carriers and bioimaging agents.

Highly active and stable hybrid catalyst of cobalt-doped FeS2 nanosheets-carbon nanotubes for hydrogen evolution reaction.

Hydrogen evolution reaction (HER) from water through electrocatalysis using cost-effective materials to replace precious Pt catalysts holds great promise for clean energy technologies. In this work we developed a highly active and stable catalyst containing Co doped earth abundant iron pyrite FeS(2) nanosheets hybridized with carbon nanotubes (Fe(1-x)CoxS(2)/CNT hybrid catalysts) for HER in acidic solutions. The pyrite phase of Fe(1-x)CoxS(2)/CNT was characterized by powder X-ray diffraction and absorption spectroscopy. Electrochemical measurements showed a low overpotential of ∼0.12 V at 20 mA/cm(2), small Tafel slope of ∼46 mV/decade, and long-term durability over 40 h of HER operation using bulk quantities of Fe(0.9)Co(0.1)S(2)/CNT hybrid catalysts at high loadings (∼7 mg/cm(2)). Density functional theory calculation revealed that the origin of high catalytic activity stemmed from a large reduction of the kinetic energy barrier of H atom adsorption on FeS(2) surface upon Co doping in the iron pyrite structure. It is also found that the high HER catalytic activity of Fe(0.9)Co(0.1)S(2) hinges on the hybridization with CNTs to impart strong heteroatomic interactions between CNT and Fe(0.9)Co(0.1)S(2). This work produces the most active HER catalyst based on iron pyrite, suggesting a scalable, low cost, and highly efficient catalyst for hydrogen generation.