Differences of tensile strength in knot tying technique between orthopaedic surgical instructors and trainees.

BACKGROUND: Knot tying technique is an extremely important basic skill for all surgeons. Clinically, knot slippage or suture breakage will lead to wound complications. Although some previous studies described the knot-tying technique of medical students or trainees, little information had been reported on the knot-tying technique of instructors. The objective of the preset study was to assess surgeons' manual knot tying techniques and to investigate the differences of tensile strength in knot tying technique between surgical instructors and trainees. METHODS: A total of 48 orthopaedic surgeons (postgraduate year: PGY 2-18) participated. Surgeons were requested to tie surgical knots manually using same suture material. They were divided into two groups based on each career; instructors and trainees. Although four open conventional knots with four throws were chosen and done with self-selected methods, knot tying practice to have the appropriate square knots was done as education only for trainees before the actual trial. The knots were placed over a 30 cm long custom made smooth polished surface with two cylindrical rods. All knots were tested for tensile strength using a tensiometer. The surgical loops were loaded until the knot slipped or the suture broke. The tensile strength of each individual knot was defined as the force (N) required to result in knot failure. Simultaneously, knot failure was evaluated based on knot slippage or suture rupture. In terms of tensile strength or knot failure, statistical comparison was performed between groups using two-tailed Mann-Whitney U test or Fisher exact probability test, respectively. RESULTS: Twenty-four instructors (PGY6-PGY18) and 24 trainees (PGY2-PGY5) were enrolled. Tensile strength was significantly greater in trainees (83.0 ± 27.7 N) than in instructors (49.9 ± 34.4 N, P = 0.0246). The ratio of slippage was significantly larger in instructors than in trainees (P < 0.001). Knot slippage (31.8 ± 17.7 N) was significantly worse than suture rupture (89.9 ± 22.2 N, P < 0.001) in tensile strength. CONCLUSIONS: Mean tensile strength of knots done by trainees after practice was judged to be greater than that done by instructors in the present study. Clinically, knot slippage can lead to wound dehiscence, compared to suture rupture.

Estimation of the External Knee Adduction Moment during Gait Using an Inertial Measurement Unit in Patients with Knee Osteoarthritis.

Although the external knee adduction moment (KAM) during gait was shown to be a quantitative parameter of medial knee osteoarthritis (OA), it requires expensive equipment and a dedicated large space to measure. Therefore, it becomes a major reason to limit KAM measurement in a clinical environment. The purpose of this study was to estimate KAM using a single inertial measurement unit (IMU) during gait in patients with knee OA. A total of 22 medial knee OA patients (44 knee joints) performed conventional gait analysis using three-dimensional (3D) motion capture system. At the same time, we attached commercial IMUs to six body segments (sternum, pelvis, both thighs, and both shanks), and IMU signals during gait were recorded synchronized with the motion capture system. The peak-to-peak difference of acceleration in the lateral/medial axis immediately after heel contact was defined as the thrust acceleration (TA). We hypothesized that TA would represent the lateral thrust of the knee during the stance phase and correlate with the first peak of KAM. The relationship between the peak KAM and TA of pelvis (R = 0.52, p < 0.001), shanks (R = 0.57, p < 0.001) and thighs (R = 0.49, p = 0.001) showed a significant correlation. The root mean square error (RMSE) of linear regression models of pelvis, shanks, and thighs to estimate KAM were 0.082, 0.079, and 0.084 Nm/(kg·m), respectively. Our newly established parameter TA showed a moderate correlation with conventional KAM. The current study confirmed our hypothesis that a single IMU would predict conventional KAM during gait. Since KAM is known as an indicator for prognosis and severity of knee OA, this new parameter has the potential to become an accessible predictor for medial knee OA instead of KAM.

Effect of body mass index on surgical times of lumbar laminoplasty and lower limb arthroplasties.

BACKGROUND: Obesity is an important factor affecting incidence and development of musculoskeletal degenerative changes. In addition, obese patients are considered less favorable surgical candidates for decompression surgery in degenerative lumbar spinal canal stenosis and lower limb arthroplasty. The purpose was to assess disease characteristics of lumbar spinal canal stenosis as well as lower limb osteoarthritis, and to investigate surgical times based on body mass index (BMI) in lumbar decompressive surgery and lower limb arthroplasties. METHODS: A total of 1161 patients with a diagnosis of lumbar canal stenosis (LCS), hip osteoarthritis (HOA) and knee osteoarthritis (KOA) were enrolled. The present investigation was conducted as a retrospective study using routinely collected data. All patients underwent primary decompressive surgery (laminoplasty: LAM) or lower limb arthroplasty (total hip arthroplasty: THA and total knee arthroplasty: TKA). All of the patients were divided into 3 groups based on BMI (kg/m2) (Group A: ≤ 24.9; Group B: 25-29.9; Group C: ≥ 30) within each disease category. To assess disease characteristics, age, gender, and BMI were evaluated for each disease category. Moreover, surgical times for LAM, THA and TKA were also assessed based on BMI classification. RESULTS: A total of 269, 470, and 422 patients were allocated to the HOA category, the KOA category, and the LCS category, respectively. The KOA category included the oldest patients and largest BMI, compared to the HOA and the LCS categories. Regarding gender difference, LCS was more common in males than in females, while opposite phenomenon was observed in the HOA and the KOA categories. The heaviest group (Group C) was significantly younger than Groups A or B in TKA and LAM. Surgical time was significantly longer in patients with overweight or obese patients than in those with normal weight in TKA and LAM, while BMI didn't affect the time in THA. CONCLUSIONS: Disease characteristics of the KOA category and the LCS category were notably affected by BMI, and surgical times in TKA and LAM were significantly longer for overweight or obese patients, whereas THA was less affected by BMI concerning disease characteristics and surgical time.

Pain detect questionnaire and pain catastrophizing scale affect gait pattern in patients with knee osteoarthritis.

PURPOSE: Although pain phenotype affects clinical score in patients with knee osteoarthritis (OA), little information has been available on the relationship between pain phenotype and gait analysis. The purpose was to investigate the relationship between pain phenotype and gait parameters.  METHODS: A total of 34 patients (24 females and 10 males) with end-stage medial compartmental knee OA participated. All the patients were evaluated based on pain detect questionnaire (PD-Q) and pain catastrophizing scale (PCS). They were divided into two categories: Group Low (PD-Q score ≤ 12) and Group High (PD-Q score > 12), PCS + (PCS ≥ 23) and PCS- (PCS < 23). Gait analysis was performed using three-dimensional motion analysis system. Statistical analysis was done to compare gait parameters between groups for each allocation of PD-Q or PCS, separately.  RESULTS: Peak vertical ground reaction forces in Group Low and High were 0.99 ± 0.054 and 0.82 ± 0.17, respectively (P = 0.015). Peak knee adduction moments in Group Low and High were 0.70 ± 0.19 and 0.39 ± 0.14, respectively (P = 0.0022). For PCS allocation, knee extension limitation during mid-stance during gait were significantly larger in PCS- (P = 0.038). CONCLUSIONS: Patients with high PD-Q score had atypical gait pattern with smaller peak vertical ground reaction force and knee adduction moment, compared to patients with low PD-Q score. Moreover, patient with low PCS had different gait pattern in extension limitation, compared to those with high PCS. PD-Q and PCS would affect gait pattern in patients with knee OA. LEVEL OF EVIDENCE: III.

Kinematically Aligned Total Knee Arthroplasty Using Medial Pivot Knee Prosthesis Enhances Medial Pivot Motion: A Comparative Kinematic Study With Mechanically Aligned Total Knee Arthroplasty.

BACKGROUND: Clinical outcomes of kinematically aligned total knee arthroplasty (KA-TKA) have been reported as comparable or superior to those of mechanically aligned TKA (MA-TKA). However, cruciate-retaining prostheses have mostly been used for KA-TKA. This study used medial pivot knee prostheses for KA-TKA, and knee kinematics after KA-TKA were assessed and compared with those after MA-TKA. METHODS: Thirteen knees in 9 patients undergoing primary TKA (8 KAs, 5 MAs) were subjected to two-dimensional (2D) to three-dimensional (3D) registration analysis at 1 year postoperatively. Each patient performed weight-bearing activities, and movements were recorded as intermittent digital radiographic images. Three-dimensional implant positions during activities were analyzed for anterior-posterior translation in the sagittal plane, condylar liftoff and mediolateral translation in the coronal plane, and femoral rotation in the axial plane. RESULTS: Posterior translation of the lateral femoral condyle from 0° to 100° was larger in KA-TKA than in MA-TKA (P = .006). The degrees of condylar liftoff and mediolateral translation were comparable between TKAs. Total external rotation of the femoral component relative to tibial component was significantly greater for KA-TKA (7.7 ± 5.2°) than for MA-TKA (1.3 ± 3.3°; P = .03). The kinematic path of the femoral component revealed greater medial pivoting motion in KA-TKA than in MA-TKA. CONCLUSIONS: KA-TKA using a medial pivot knee prosthesis successfully reproduced the medial pivot pattern and achieved larger femoral external rotation relative to the tibia than MA-TKA. KA-TKA was able to maximize the primary concept of the medial pivot knee prosthesis.

Surgical Technique to Bring Down the Patellar Height and to Reconstruct the Tendon for Chronic Patellar Tendon Rupture.

Although surgical treatment is the gold standard for chronic patellar tendon rupture, the technique of patellar tendon reconstruction is still difficult. Basically, good clinical results of surgical repair for acute patellar tendon rupture have been reported. However, the results of reconstructive surgery for chronic patellar tendon rupture are still inconsistent. Some surgical options have been previously reported. For example, surgeons need to choose between 1- and 2-stage reconstruction. Furthermore, contralateral bone-tendon-bone graft, ipsilateral semitendinosus tendon graft, Achilles tendon allograft, and an artificial ligament have been used to reconstruct the patellar tendon. Generally, surgeons are concerned about postoperative complications, including loss of knee flexion, quadriceps weakness, and wound problems. One of the key points to avoid these complications is to improve proximal patellar migration. The purpose of this article is to present an easy and safe technique to bring down the patellar height with polyethylene tape and to reconstruct the patellar tendon with an artificial ligament. Although it has limitations, the described technique can facilitate reconstruction of chronic patellar tendon rupture.