Applying Nuclear Forward Scattering as In Situ and Operando Tool for the Characterization of FeN4 Moieties in the Hydrogen Evolution Reaction.

Nuclear forward scattering (NFS) is a synchrotron-based technique relying on the recoil-free nuclear resonance effect similar to Mössbauer spectroscopy. In this work, we introduce NFS for in situ and operando measurements during electrocatalytic reactions. The technique enables faster data acquisition and better discrimination of certain iron sites in comparison to Mössbauer spectroscopy. It is directly accessible at various synchrotrons to a broad community of researchers and is applicable to multiple metal isotopes. We demonstrate the power of this technique with the hydrogen evolution mechanism of an immobilized iron porphyrin supported on carbon. Such catalysts are often considered as model systems for iron-nitrogen-carbon (FeNC) catalysts. Using in situ and operando NFS in combination with theoretical predictions of spectroscopic data enables the identification of the intermediate that is formed prior to the rate-determining step. The conclusions on the reaction mechanism can be used for future optimization of immobilized molecular catalysts and metal-nitrogen-carbon (MNC) catalysts.

Sol-Gel-Derived Ordered Mesoporous High Entropy Spinel Ferrites and Assessment of Their Photoelectrochemical and Electrocatalytic Water Splitting Performance.

The novel material class of high entropy oxides with their unique and unexpected physicochemical properties is a candidate for energy applications. Herein, it is reported for the first time about the physico- and (photo-) electrochemical properties of ordered mesoporous (CoNiCuZnMg)Fe2 O4 thin films synthesized by a soft-templating and dip-coating approach. The A-site high entropy ferrites (HEF) are composed of periodically ordered mesopores building a highly accessible inorganic nanoarchitecture with large specific surface areas. The mesoporous spinel HEF thin films are found to be phase-pure and crack-free on the meso- and macroscale. The formation of the spinel structure hosting six distinct cations is verified by X-ray-based characterization techniques. Photoelectron spectroscopy gives insight into the chemical state of the implemented transition metals supporting the structural characterization data. Applied as photoanode for photoelectrochemical water splitting, the HEFs are photostable over several hours but show only low photoconductivity owing to fast surface recombination, as evidenced by intensity-modulated photocurrent spectroscopy. When applied as oxygen evolution reaction electrocatalyst, the HEF thin films possess overpotentials of 420 mV at 10 mA cm-2 in 1 m KOH. The results imply that the increase of the compositional disorder enhances the electronic transport properties, which are beneficial for both energy applications.

Substituent Effects in Iron Porphyrin Catalysts for the Hydrogen Evolution Reaction.

For a future hydrogen economy, non-precious metal catalysts for the water splitting reactions are needed that can be implemented on a global scale. Metal-nitrogen-carbon (MNC) catalysts with active sites constituting a metal center with fourfold coordination of nitrogen (MN4 ) show promising performance, but an optimization rooted in structure-property relationships has been hampered by their low structural definition. Porphyrin model complexes are studied to transfer insights from well-defined molecules to MNC systems. This work combines experiment and theory to evaluate the influence of porphyrin substituents on the electronic and electrocatalytic properties of MN4 centers with respect to the hydrogen evolution reaction (HER) in aqueous electrolyte. We found that the choice of substituent affects their utilization on the carbon support and their electrocatalytic performance. We propose an HER mechanism for supported iron porphyrin complexes involving a [FeII (P⋅)]- radical anion intermediate, in which a porphinic nitrogen atom acts as an internal base. While this work focuses on the HER, the limited influence of a simultaneous interaction with the support and an aqueous electrolyte will likely be transferrable to other catalytic applications.

Magnetic and Electrocatalytic Properties of Nanoscale Cobalt Boride, Co3B.

The use of low-temperature solution synthesis followed by a brief annealing step allows metastable single-phase Co3B nanoparticles to be obtained, with sizes ranging from 11 to 22 nm. The particles are ferromagnetic with a saturation magnetization of 91 A m2 kg-1 (corresponding to 1.02 µB/Co) and a coercive field of 0.14 T at 5 K, retaining the semihard magnetic properties of bulk Co3B. They display a magnetic blocking temperature of 695 K and a Curie temperature near 710 K, but the measurement of these high-temperature properties was complicated by decomposition of the particles during heating in the magnetometer. Additionally, the nanoparticles of Co3B were investigated as an electrocatalyst in the oxygen evolution reaction and showed a low onset potential of 1.55 V vs RHE. XPS measurements were performed before and after the electrocatalytic measurements to study the surface of the catalyst, to pinpoint what appear to be the active surface species.

Analysis of the interfacial characteristics of BiVO4/metal oxide heterostructures and its implication on their junction properties.

The formation of heterostructures has proven to be a viable way to achieve high photoelectrochemical water splitting efficiencies with BiVO4 based photoanodes. Especially, cobalt and nickel based oxides are suitable low cost contact materials. However, the exact role of these contact materials is not yet completely understood because of the difficulty to individually quantify the effects of surface passivation, charge carrier separation and catalysis on the efficiency of a heterostructure. In this study, we used photoelectron spectroscopy in combination with in situ thin film deposition to obtain direct information on the interface structure between polycrystalline BiVO4 and NiO, CoOx and Sn-doped In2O3 (ITO). Strong upwards band bending was observed for the BiVO4/NiO and BiVO4/CoOx interfaces without observing chemical changes in BiVO4, while limited band bending and reduction of Bi and V was observed while forming the BiVO4/ITO interface. Thus, the tunability of the Fermi level position within BiVO4 seems to be limited to a certain range. The feasibility of high upwards band bending through junctions with high work function (WF) compounds demonstrate that nickel oxide and cobalt oxide are able to enhance the charge carrier separation in BiVO4. Similar studies could help to identify whether new photoelectrode materials and their heterostructures would be suitable for photoelectrochemical water splitting.

Interaction of liquid water with the p-GaInP2(100) surface covered with submonolayer oxide.

High-resolution surface-sensitive synchrotron radiation photoelectron spectroscopy was used to study the interaction of water with the p-GaInP2(100) surface covered with submonolayer residual native oxide in order to get insight into water dissociation at the solar water-splitting photocathodes in real liquid environment. In the surface-sensitive valence band spectra features related to Ga-OH, In-OH, and H-In-OH bonds appear after emersion of the p-GaInP2(100) surface from liquid water at room temperature. Indium core levels remain intact after emersion, while the gallium core levels indicate transformation of gallium oxides to hydroxides, as well as the accumulation of metallic gallium. Surface sensitive P 2p core level spectra indicate formation of P-H bonds after emersion. These changes of the surface chemical bonds can be attributed to the dissociation of the water molecules on the p-GaInP2(100) surface, leading to the subsequent transformation of surface oxides to hydroxides. Interaction of water with the p-GaInP2(100) surface covered with submonolayer residual native oxide causes an increase in the work function by 80 meV and a modification of the valence band edge spectrum, which is evidence of a change of the surface dipole due to the charge redistribution induced by the transformation of the surface oxides to hydroxides.

CoOx thin film deposited by CVD as efficient water oxidation catalyst: change of oxidation state in XPS and its correlation to electrochemical activity.

To reduce energy losses in water electrolysers a fundamental understanding of the water oxidation reaction steps is necessary to design efficient oxygen evolution catalysts. Here we present CoOx/Ti electrocatalytic films deposited by thermal and plasma enhanced chemical vapor deposition (CVD) onto titanium substrates. We report electrochemical (EC), photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) measurements. The electrochemical behavior of the samples was correlated with the chemical and electronic structure by recording XPS spectra before and after each electrochemical treatment (conditioning and cyclovoltammetry). The results show that the electrochemical behavior of CoOx/Ti strongly depends on the resulting electronic structure and composition. The thermal deposition leads to the formation of a pure Co(II)Ox which transforms to a mixed Co(II)Co(III)Ox during the OER. This change in oxidation state is coupled with a decrease in overpotential from η = 0.57 V to η = 0.43 V at 5 mA cm(-2). Plasma deposition in oxygen leads to a Co(III)-dominated mixed CoOx, that has a lower onset potential as deposited due to a higher Co(III) content in the initial deposited material. After the OER XPS results of the CoOx/Ti indicate a partial formation of hydroxides and oxyhydroxides on the oxide surface. Finally the plasma deposition in air, results in a CoOxOH2 surface, that is able to completely oxidizes during OER to an oxyhydroxide Co(III)OOH. With the in situ formed CoOOH we present a highly active catalyst for the OER (η = 0.34 at 5 mA cm(-2); η = 0.37 V at 10 mA cm(-2)).

Band engineering for efficient catalyst-substrate coupling for photoelectrochemical water splitting.

To achieve an overall efficient solar water splitting device, not only the efficiencies of photo-converter and catalyst are decisive, but also their appropriate coupling must be considered. In this report we explore the origin of a voltage loss occurring at the interface between a thin film amorphous silicon tandem cell and the TiO2 corrosion protection layer by means of XPS. We find that the overall device can be disassembled into its primary constituents and that they can be analyzed separately, giving insight into the device structure as a whole. Thus, a series of model experiments were conducted, each representing a part of the complete device. We finally arrive at the conclusion, that the formation of a SiO2 interfacial layer between the TiO2 protection layer and the silicon cell gives rise to the voltage loss observed for the whole device.

Dipolar SAMs Reduce Charge Carrier Injection Barriers in n-Channel Organic Field Effect Transistors.

In this work we examine small conjugated molecules bearing a thiol headgroup as self assembled monolayers (SAM). Functional groups in the SAM-active molecule shift the work function of gold to n-channel semiconductor regimes and improve the wettability of the surface. We examine the effect of the presence of methylene linkers on the orientation of the molecule within the SAM. 3,4,5-Trimethoxythiophenol (TMP-SH) and 3,4,5-trimethoxybenzylthiol (TMP-CH2-SH) were first subjected to computational analysis, predicting work function shifts of -430 and -310 meV. Contact angle measurements show an increase in the wetting envelope compared to that of pristine gold. Infrared (IR) measurements show tilt angles of 22 and 63°, with the methylene-linked molecule (TMP-CH2-SH) attaining a flatter orientation. The actual work function shift as measured with photoemission spectroscopy (XPS/UPS) is even larger, -600 and -430 meV, respectively. The contact resistance between gold electrodes and poly[N,N'-bis(2-octyldodecyl)-naphthalene-1,4:5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene) (Polyera Aktive Ink, N2200) in n-type OFETs is demonstrated to decrease by 3 orders of magnitude due to the use of TMP-SH and TMP-CH2-SH. The effective mobility was enhanced by two orders of magnitude, significantly decreasing the contact resistance to match the mobilities reported for N2200 with optimized electrodes.

Electronic structure and electrode properties of tetracyanoquinodimethane (TCNQ): a surface science investigation of lithium intercalation into TCNQ.

Organic materials are of interest as ion battery cathode materials because they offer advantages over inorganic cathodes such as abundant resources and a low ecological footprint. However, they suffer from slow kinetics and a comparatively low potential. In this paper, we have investigated alkali induced changes in the electronic structure of tetracyanoquinodimethane (TCNQ) to be used as cathode material in Li-ion batteries. Lithium was inserted stepwise into TCNQ thin films by exposure to lithium vapour and analysis by photoemission (PES) was performed. The evolution of core levels, electronic structure and Fermi-level with increasing lithium insertion into TCNQ was monitored. The results show that lithium insertion takes place under integer charge transfer and polaron formation. We find no indication of deterioration of the material. The consequences of evolution of electronic structure and polaron formation for electrode potential and kinetic properties of the material are discussed.

Improved photocatalytic activity in RuO2-ZnO nanoparticulate heterostructures due to inhomogeneous space charge effects.

New 2-6 wt% RuO2-ZnO heterojunction nanocatalysts were synthesized by a straightforward two-step procedure. They were composed of a porous network of aggregated 25 nm wurtzite ZnO nanocrystallites modified with RuO2 and showed enhanced light absorption in the visible region due to surface plasmon resonance. In order to investigate the energetic structure of the photocatalyst XPS core line and valence band spectra of in situ in UHV prepared heterointerfaces were compared to results obtained from the particles. The shift of Zn 2p3/2 and O 1s core level spectra was determined to be at least 0.80 ± 0.05 eV for the in situ prepared heterojunction whereas it was found to be 0.40 ± 0.05 and 0.45 ± 0.05 eV, respectively, in the photocatalysts. The different values were ascribed to the reduced size of the particles and the different measurability of band bending at the interface of the heterojunction RuO2-ZnO compared to the nanoparticles. The RuO2/ZnO photocatalysts showed higher photocatalytic activity and recyclability than pure ZnO for the degradation of various dyes under UV light irradiation due to vectorial charge separation of photogenerated electrons and holes resulting from internal electric field, the ruthenium oxide acting as a quasi-metallic contact.

Photoelectrochemical and photovoltaic characteristics of amorphous-silicon-based tandem cells as photocathodes for water splitting.

In this study amorphous silicon tandem solar cells are successfully utilized as photoelectrodes in a photoelectrochemical cell for water electrolysis. The tandem cells are modified with various amounts of platinum and are combined with a ruthenium oxide counter electrode. In a two-electrode arrangement this system is capable of splitting water without external bias with a short-circuit current of 4.50 mA cm(-2). On the assumption that no faradaic losses occur, a solar-to-hydrogen efficiency of 5.54% is achieved. In order to identify the relevant loss processes, additional three-electrode measurements were performed for each involved half-cell.

Solar hydrogen generation with wide-band-gap semiconductors: GaP(100) photoelectrodes and surface modification.

GaP, with its large band gap of 2.26 eV (indirect) and 2.78 eV (direct), is a very promising candidate for direct photoelectrochemical water splitting. Herein, p-GaP(100) is investigated as a photocathode for hydrogen generation. The samples are characterized after each preparation step regarding how their photoelectrochemical behavior is influenced by surface composition and structure using a combination of electrochemical and surface-science preparation and characterization techniques. The formation of an Ohmic back contact employing an annealed gold layer and the removal of the native oxides using various etchants are studied. It turns out that the latter has a pronounced effect on the surface composition and structure and therefore also on the electronic properties of the interface. The formation of a thin Ga(2)O(3) buffer layer on the p-GaP(100) surface does not lead to a clear improvement in the photoelectrochemical efficiency, neither do Pt nanocatalyst particles deposited on top of the buffer layer. This behavior can be understood by the electronic structure of these layers, which is not well suited for an efficient charge transfer from the absorber to the electrolyte. First experiments show that the efficiency can be considerably improved by employing a thin GaN layer as a buffer layer on top of the p-GaP(100) surface.

Nanostructured SnO2-ZnO heterojunction photocatalysts showing enhanced photocatalytic activity for the degradation of organic dyes.

Nanoporous SnO(2)-ZnO heterojunction nanocatalyst was prepared by a straightforward two-step procedure involving, first, the synthesis of nanosized SnO(2) particles by homogeneous precipitation combined with a hydrothermal treatment and, second, the reaction of the as-prepared SnO(2) particles with zinc acetate followed by calcination at 500 °C. The resulting nanocatalysts were characterized by X-ray diffraction (XRD), FTIR, Raman, X-ray photoelectron spectroscopy (XPS), nitrogen adsorption-desorption analyses, transmission electron microscopy (TEM), and UV-vis diffuse reflectance spectroscopy. The SnO(2)-ZnO photocatalyst was made of a mesoporous network of aggregated wurtzite ZnO and cassiterite SnO(2) nanocrystallites, the size of which was estimated to be 27 and 4.5 nm, respectively, after calcination. According to UV-visible diffuse reflectance spectroscopy, the evident energy band gap value of the SnO(2)-ZnO photocatalyst was estimated to be 3.23 eV to be compared with those of pure SnO(2), that is, 3.7 eV, and ZnO, that is, 3.2 eV, analogues. The energy band diagram of the SnO(2)-ZnO heterostructure was directly determined by combining XPS and the energy band gap values. The valence band and conduction band offsets were calculated to be 0.70 ± 0.05 eV and 0.20 ± 0.05 eV, respectively, which revealed a type-II band alignment. Moreover, the heterostructure SnO(2)-ZnO photocatalyst showed much higher photocatalytic activities for the degradation of methylene blue than those of individual SnO(2) and ZnO nanomaterials. This behavior was rationalized in terms of better charge separation and the suppression of charge recombination in the SnO(2)-ZnO photocatalyst because of the energy difference between the conduction band edges of SnO(2) and ZnO as evidenced by the band alignment determination. Finally, this mesoporous SnO(2)-ZnO heterojunction nanocatalyst was stable and could be easily recycled several times opening new avenues for potential industrial applications.

The stability of the SEI layer, surface composition and the oxidation state of transition metals at the electrolyte-cathode interface impacted by the electrochemical cycling: X-ray photoelectron spectroscopy investigation.

The stability of the valence state of the 3d transition metal ions and the stoichiometry of LiMO(2) (M = Co, Ni, Mn) layered oxides at the surface-electrolyte interface plays a crucial role in energy storage applications. The surface oxidation/reduction of the cations caused by the contact of the solids to air or to the electrolyte results in the blocking of the Li-transport through the interface that leads to the fast batteries deterioration. The influence of the end-of-charge voltage on the chemical composition and the oxidation state of 3d transition metal ions, as well as the stability of the solid-electrolyte interface formed during the electrochemical Li-deintercalation/intercalation of the LiCoO(2) and Li(Ni,Mn,Co)O(2), have been investigated by X-ray photoelectron spectroscopy. While the chemical composition of the solid-electrolyte interface is similar for both layered oxide surfaces, the electrochemical cycling to some critical voltage values leads to the disappearance of the interface. By the analysis of the shape of the 2p and 3s photoelectron emissions we show that the formation of the solid-electrolyte interface layer correlates with the partial reduction of the trivalent Co ions at the electrolyte-LiCoO(2) interface and the amount of the Co(2+) ions is increased as the solid-electrolyte interface vanishes. In contrast, the Mn(4+), Co(3+) and Ni(2+) ions of the Li(Ni,Mn,Co)O(2) are stable at the interface under the electrochemical cycling to higher end-of-charge voltage. A correlation between deterioration of the LiCoO(2) and Li(Ni,Mn,Co)O(2) batteries and the change of electronic structure at the surface/interface after the electrochemical cycling has been found. The dissolution of the solid-electrolyte interface layer might be the reason for the fast deterioration of the Li-ion batteries.

On the Surface Modification of LLZTO with LiF via a Gas-Phase Approach and the Characterization of the Interfaces of LiF with LLZTO as Well as PEO+LiTFSI.

In this study we present gas-phase fluorination as a method to create a thin LiF layer on Li6.5La3Zr1.5Ta0.5O12 (LLZTO). We compared these fluorinated films with LiF films produced by RF-magnetron sputtering, where we investigated the interface between the LLZTO and the deposited LiF showing no formation of a reaction layer. Furthermore, we investigated the ability of this LiF layer as a protection layer against Li2CO3 formation in ambient air. By this, we show that Li2CO3 formation is absent at the LLZTO surface after 24 h in ambient air, supporting the protective character of the formed LiF films, and hence potentially enhancing the handling of LLZTO in air for battery production. With respect to the use within hybrid electrolytes consisting of LLZTO and a mixture of polyethylene oxide (PEO) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), we also investigated the interface between the formed LiF films and a mixture of PEO+LiTFSI by X-ray photoelectron spectroscopy (XPS), showing decomposition of the LiTFSI at the interface.

P-Terminated InP (001) Surfaces: Surface Band Bending and Reactivity to Water.

Stable InP (001) surfaces are characterized by fully occupied and empty surface states close to the bulk valence and conduction band edges, respectively. The present photoemission data show, however, a surface Fermi level pinning only slightly below the midgap energy which gives rise to an appreciable surface band bending. By means of density functional theory calculations, it is shown that this apparent discrepancy is due to surface defects that form at finite temperature. In particular, the desorption of hydrogen from metalorganic vapor phase epitaxy grown P-rich InP (001) surfaces exposes partially filled P dangling bonds that give rise to band gap states. These defects are investigated with respect to surface reactivity in contact with molecular water by low-temperature water adsorption experiments using photoemission spectroscopy and are compared to our computational results. Interestingly, these hydrogen-related gap states are robust with respect to water adsorption, provided that water does not dissociate. Because significant water dissociation is expected to occur at steps rather than terraces, surface band bending of a flat InP (001) surface is not affected by water exposure.

Impedance Modeling of Solid-State Electrolytes: Influence of the Contacted Space Charge Layer.

Understanding the interfacial impedance between the solid electrolyte and the electrode is a critical issue for the design of solid-state batteries. We propose a new equivalent circuit model that treats the interface not only as a capacitor but also includes the space charge layer resistance and the resultant polarization resistance. Moreover, the elements of the circuit model are quantified by the physical quantities based on the recently proposed modified Planck-Nernst-Poisson (MPNP) model, which includes the effect of the unoccupied regular lattice sites (vacancies) in the electro-diffusion problem and takes both the ion and electron contributions into the account. We provide a new analytical solution for the space charge layer capacitance. Comparative numerical results demonstrate that our proposed model with additional polarization resistance can explain well the real impedance tail at the low-frequency region, for which the pure capacitor interface model fails. The model is verified against the experimental impedance spectra of LiPON.

Compositional Dependence of Li-Ion Conductivity in Garnet-Rich Composite Electrolytes for All-Solid-State Lithium-Ion Batteries-Toward Understanding the Drawbacks of Ceramic-Rich Composites.

Composite electrolytes comprising a polymer plus Li salt matrix and embedded fillers have the potential of realizing high lithium-ion conductivity, good mechanical properties, wide electrochemical operational window, and stability against metallic lithium, all of which are essential for the development of high-energy-density all-solid-state lithium-ion batteries. In this study, a solvent-free approach has been used to prepare composite electrolytes with tetragonal and cubic phase garnets synthesized via nebulized spray pyrolysis with polyethylene oxide (PEO) being the polymer component. Electrochemical impedance spectroscopy (EIS) is used to examine a series of composites with different garnets and weight fractions. The results show that with the increase in the ceramic weight fraction in the composites, ionic conductivity is reduced and alternative Li-ion transport pathways become accessible for composites as compared to the filler-free electrolytes. An attempt is made to understand the ion transport mechanism within the composites. The role of the chemical and morphological properties of the ceramic filler in polymer-rich and ceramic-rich composite electrolytes is explained by studying the blends of nonconducting ceramics with the Li-conducting polymer, indicating that the intrinsic conductivity of the ceramic filler significantly contributes to the overall conductive process in the ceramic-rich systems. Further, the stability of the garnet/PEO interface is studied via X-ray photoelectron spectroscopy, and its impact on the lithium-ion transport is studied using EIS.

Thermal Stability and Cation Composition of Hybrid Organic-Inorganic Perovskites.

One of the great challenges of hybrid organic-inorganic perovskite photovoltaics is the material's stability at elevated temperatures. Over the past years, significant progress has been achieved in the field by compositional engineering of perovskite semiconductors, e.g., using multiple-cation perovskites. However, given the large variety of device architectures and nonstandardized measurement protocols, a conclusive comparison of the intrinsic thermal stability of different perovskite compositions is missing. In this work, we systematically investigate the role of cation composition on the thermal stability of perovskite thin films. The cations in focus of this study are methylammonium (MA), formamidinium (FA), cesium, and the most common mixtures thereof. We compare the thermal degradation of these perovskite thin films in terms of decomposition, optical losses, and optoelectronic changes when stressed at 85 °C for a prolonged time. Finally, we demonstrate the effect of thermal stress on perovskite thin films with respect to their performance in solar cells. We show that all investigated perovskite thin films show signs of degradation under thermal stress, though the decomposition is more pronounced in methylammonium-based perovskite thin films, whereas the stoichiometry in methylammonium-free formamidinium lead iodide (FAPbI3) and formamidinium cesium lead iodide (FACsPbI3) thin films is much more stable. We identify compositions of formamidinium and cesium to result in the most stable perovskite compositions with respect to thermal stress, demonstrating remarkable stability with no decline in power conversion efficiency when stressed at 85 °C for 1000 h. Thereby, our study contributes to the ongoing quest of identifying the most stable perovskite compositions for commercial application.