Priming chondrocytes during expansion alters cell behavior and improves matrix production in 3D culture.

OBJECTIVE: Cartilage tissue engineering strategies that use autologous chondrocytes require in vitro expansion of cells to obtain enough cells to produce functional engineered tissue. However, chondrocytes dedifferentiate during expansion culture, limiting their ability to produce chondrogenic tissue and their utility for cell-based cartilage repair strategies. The current study identified conditions that favor cartilage production and the mechanobiological mechanisms responsible for these benefits. DESIGN: Chondrocytes were isolated from juvenile bovine knee joints and cultured with (primed) or without (unprimed) a growth factor cocktail. Gene expression, cell morphology, cell adhesion, cytoskeletal protein distribution, and cell mechanics were assessed. Following passage 5, cells were embedded into agarose hydrogels to evaluate functional properties of engineered cartilage. RESULTS: Priming cells during expansion culture altered cell phenotype and chondrogenic tissue production. Unbiased ribonucleic acid-sequencing analysis suggested, and experimental studies confirmed, that growth factor priming delays dedifferentiation associated changes in cell adhesion and cytoskeletal organization. Priming also overrode mechanobiological pathways to prevent chondrocytes from remodeling their cytoskeleton to accommodate the stiff, monolayer microenvironment. Passage 1 primed cells deformed less and had lower yes associated protein 1 activity than unprimed cells. Differences in cell adhesion, morphology, and cell mechanics between primed and unprimed cells were mitigated by passage 5. CONCLUSIONS: Priming suppresses mechanobiologic cytoskeletal remodeling to prevent chondrocyte dedifferentiation, resulting in more cartilage-like tissue-engineered constructs.

Effect of Passaging on Bovine Chondrocyte Gene Expression and Engineered Cartilage Production.

Tissue engineering strategies show great potential for repairing osteochondral defects in osteoarthritic joints; however, these approaches often rely on passaging cells multiple times to obtain enough cells to produce functional tissue. Unfortunately, monolayer expansion culture causes chondrocyte dedifferentiation, which is accompanied by a phenotypical and morphological shift in chondrocyte properties that leads to a reduction in the quality of de novo cartilage produced. Thus, the objective of this study was to evaluate transcriptional variations during in vitro expansion culture and determine how differences in cell phenotype from monolayer expansion alter development of functional engineered cartilage. We used an unbiased approach to explore genome-wide transcriptional differences in chondrocyte phenotype at passage 1 (P1), P3, and P5, and then seeded cells into hydrogel scaffolds at P3 and P5 to assess cells' abilities to produce cartilaginous extracellular matrix in three dimensional (3D). We identified distinct phenotypic differences, specifically for genes related to extracellular organization and cartilage development. Both P3 and P5 chondrocytes were able to produce chondrogenic tissue in 3D, with P3 cells producing matrix with greater compressive properties and P5 cells secreting matrix with higher glycosaminoglycan/DNA and collagen/DNA ratios. Furthermore, we identified 24 genes that were differentially expressed with passaging and enriched in human osteoarthritis (OA) genome-wide association studies, thereby prioritizing them as functionally relevant targets to improve protocols that recapitulate functional healthy cartilage with cells from adult donors. Specifically, we identified novel genes, such as TMEM190 and RAB11FIP4, which were enriched with human hip OA and may play a role in chondrocyte dedifferentiation. This work lays the foundation for several pathways and genes that could be modulated to enhance the efficacy for chondrocyte culture for tissue regeneration, which could have transformative impacts for cell-based cartilage repair strategies.

Orphan Applicants in Orthopedic Surgery: Where Do Allopathic Applicants Without an Affiliated Residency Program Match?

Background  Orthopedic surgery is one of the most competitive specialties to match into a residency. With a plethora of qualified applicants and the subjective nature of matching into any residency program, it can be difficult to accurately assess the chances of successfully matching into orthopedic surgery and the types of programs an applicant will match into. The purpose of this study is to compare the types of programs that students from medical schools with and without home programs match. Methods This was a five-year retrospective study (2019 to 2023) analyzing 155 United States Doctor of Medicine (M.D.) programs and their orthopedic residency-matched students. Of the 155 programs, 40 were excluded from the study due to the lack of obtainable data. For each medical school, we analyzed several variables: the presence of a home program, the total number of orthopedic residency matches, residency program matches, and residency program affiliation (academic, community, university-affiliated community-based, military). Results Of the 2066 total matched applicants from institutions with home programs, 1508 (73%) matched into academic centers, 315 (15.3%) into university-affiliated community programs, 172 (8.3%) into community programs, and 71 (3.4%) into military programs. In contrast, of the 219 total matched applicants from institutions without home programs (orphan applicants), 144 (67.8%) matched into academic programs, 36 (16.4%) into university-affiliated community programs, 28 (12.8%) into community programs, and 11 (5%) into military programs. Conclusion A greater proportion of students from institutions with home programs matched into academic centers compared to orphan applicants (73% vs. 65.8%). A greater proportion of orphan applicants matched into community programs (12.8% vs. 8.3%).

What is normal femoral head/neck anatomy? An analysis of radial CT reconstructions in adolescents.

BACKGROUND: Cam morphology in femoroacetabular impingement has been implicated in the development of osteoarthritis. The alpha angle and femoral head/neck offset are widely used to determine femoral head asphericity. To our knowledge, no study has evaluated the alpha angle circumferentially using three-dimensional imaging in a population of healthy individuals of adolescent age. QUESTIONS/PURPOSES: We sought to (1) determine normal values for the alpha angle in adolescents, (2) define the location along the neck with the highest alpha angle, and (3) determine normal femoral head and neck radii and femoral head/neck offset. METHODS: Fifty CT scans from a database of scans obtained for reasons not related to hip pain were studied. The average age of the subjects was 15 years (range, 14-16 years). Alpha angle and femoral head/neck offset were measured circumferentially. RESULTS: The alpha angle averaged 40.66 ± 4.46 mm for males and 37.77 ± 5.65 mm for females. The alpha angle generally was highest between the 11:40 and 12:40 o'clock and between the 6:00 and 7:40 o'clock positions. The femoral head radius was 24.53 ± 1.74 mm for males and 21.94 ± 1.13 mm for females, and the femoral neck radius was 16.14 ± 2.32 mm for males and 13.82 ± 2.38 mm for females. The mean femoral head/neck offset was 8.39 ± 1.97 mm for males and 8.13 ± 2.27 mm for females. CONCLUSIONS: In this healthy population of 14- to 16-year-old subjects, the highest alpha angle was at the superior and inferior aspects of the heads rather than at the anterosuperior aspect. This information will provide benchmark values for distinction between normal and abnormal morphologic features of the femoral head.

Patient-Reported Outcomes of Kinematic vs Mechanical Alignment in Total Knee Arthroplasty: A Systematic Review and Meta-analysis of Randomized Controlled Trials.

Background: Total knee arthroplasty (TKA) is an effective treatment method for severe osteoarthritis of the knee. Poor alignment of a knee replacement has been associated with suboptimal clinical results. Traditionally, mechanical alignment (MA) has been considered the gold standard. In light of reports of decreased satisfaction with TKA, a new technique called kinematic alignment (KA) has been developed. The purpose of this study is to (1) review the results of KA and MA for TKA in randomized controlled trials based on the Western Ontario and McMaster Universities Arthritis Index score, the Oxford Knee Score, and the Knee Society Scores, (2) perform a meta-analyses of the randomized controlled trials with baseline and follow-up values of these parameters, and (3) discuss other shortcomings of this literature from the perspective of study design and execution. Methods: Two independent reviewers performed a systematic review of the English literature using the Embase, Scopus, and PubMed databases searching for randomized controlled trials of MA vs KA in TKA. Of the initial 481 published reports, 6 studies were included in the final review for meta-analysis. The individual studies were then analyzed to evaluate for risks of bias and inconsistencies of methodology. Results: A majority of studies demonstrated low risk of bias. All studies had fundamental technical issues by utilizing different techniques to achieve KA vs MA. There was no significant difference between KA and MA in these studies. Conclusions: There is no significant difference in any outcomes measured between KA and MA in TKA. Both statistical and methodological factors diminish the value of these conclusions.

Improving Technical Outcome in Osteochondral Allograft Transplantation of the Femoral Trochlea: The Role of Contoured Guides, Experience Level, Graft Size, and Graft Position.

Background: The use of coring instrumentation for osteochondral allograft (OCA) transplantation of the femoral trochlea is challenging due to the complex topography of this anatomical area. Purpose: We sought to determine the effect of flat guides versus guides contoured to the surface of the trochlea on graft step-off in trochlear OCAs performed on a foam bone model. We also determined the effect of surgeon experience level and graft size on step-off. Study Design: Controlled laboratory study. Methods: Allograft harvesters were produced in 3 different sequential sizes with either a flat or a contoured undersurface. The guides matched one another in all aspects of shape and size except for the undersurface contour. The contoured undersurface generally matched the surface of the bone model trochlea but was not customized to that surface. A total of 72 foam femora were obtained. Identical trochlear stellate lesions of 3 different sizes (small, medium, and large) were created using 3-dimensional printed surface templates. A total of 6 surgeons (3 attending and 3 resident surgeons) performed OCAs of each trochlear lesion. Each surgeon performed 1 graft for each size and each guide type (n = 6 per surgeon). A specialized digital caliper was prepared that allowed the measurement of graft step-off to within 0.01 mm at a distance of 5 mm between the 2 sensors. The measurements were performed at 8 positions around the clockface of the grafts. Results: Grafts performed with the contoured guides had a mean step-off of 0.43 ± 0.37 mm. Grafts performed with the flat guides had a mean step-off of 0.74 ± 0.78 mm (P < .0001). Experience level did not have a significant effect on graft step-off (P = .81). There was no identifiable pattern indicating higher step-off at any one position on the clockface. Conclusion: In this study, contoured grafts had significantly lower step-offs compared with flat guides. Experience level, clockface position, and graft size did not affect step-off.

Multilevel measurement of acetabular version using 3-D CT-generated models: implications for hip preservation surgery.

BACKGROUND: Numerous structural deformities of the acetabulum are associated with hip osteoarthritis (OA). Acetabular retroversion has been implicated in the development of femoroacetabular impingement. However, it is unknown if retroversion occurs from isolated excessive bone in the superior acetabulum or a torsional phenomenon of the entire pelvic segment. QUESTIONS/PURPOSES: A method was developed to measure acetabular version (AV) using 3-D models thus eliminating positional factors. This method was used to determine if acetabular retroversion is an isolated entity or an effect involving the entire pelvic segment containing the acetabulum. METHOD: Fifty pelvic CT scans were selected from a large database. Measurements were performed for abduction, ischial spine position, and AV at multiple levels. The relationships between anteversion at multiple levels and between midacetabular anteversion and ischial spine position were analyzed. RESULTS: The mean upper and midlevel acetabular anteversion values were 14.4° ± 10.5° and 21.3° ± 5.8°, respectively. The mean abduction was 39.7° ± 4.3°. The prevalence of acetabular retroversion was 7%. Females had greater anteversion than males at all levels. Correlations were found between Levels 1 and 4 version (r = 0.74) and the ischial spine index and Level 4 version (r = 0.67). CONCLUSIONS: These data suggest retroversion involves the acetabulum at all levels and includes the entire pelvic segment containing the acetabulum and the ischial spine. CLINICAL RELEVANCE: These data are relevant for surgeons in providing targets for normal positioning of the acetabulum during periacetabular osteotomies and acetabular recontouring procedures.

Computer-assisted navigation of total knee arthroplasty for osteoarthritis in a patient with severe posttraumatic femoral deformity.

In the setting of extraarticular deformities of the knee, total knee arthroplasty (TKA) is difficult, as anatomical abnormalities obstruct identification of alignment landmarks and may preclude the use of traditional instrumentation. The long-term clinical value of computer assistance for TKA is a point of ongoing controversy. Few reports describe the use of computer-assisted orthopedic surgery as a method to decrease alignment outliers in TKA with associated posttraumatic deformities. In this report, a 70-year-old woman who had a severe distal femoral deformity from a previous open fracture underwent computer-assisted TKA for osteoarthritis. The use of a computer-assisted navigation system achieved a high degree of accuracy relative to the desired target alignment and led to improved function in a patient in which standard instrumentation was not feasible.

Intermediate-term radiographic and patient outcomes in revision hip arthroplasty with a modular calcar design and porous plasma coating.

This study is a retrospective evaluation of the intermediate-term results of 26 consecutive revision total hip arthroplasties performed with a modular titanium, uncemented femoral component. The average patient age at the time of revision total hip arthroplasty was 72 years, and there were an equal number of males and females. The mean follow-up was 5.7 years (ranging from 4 to 11 years). No re-revision was necessary during this follow-up time. The mean Harris hip score improved significantly (preoperative and postoperative score was 50.7 and 89.6, respectively; P < .001). Postoperatively, Short Form 36 functional scores averaged 67.7 across 9 functional parameters. Our observed low revision rate and favorable patient-reported outcome scores support the continuous use of modular titanium, uncemented femoral components in revision total hip arthroplasty.

Femoral anteversion in THA and its lack of correlation with native acetabular anteversion.

Several studies support the concept that, for optimum range of motion in THA, the combined femoral and acetabular anteversion should be some constant or fall within some "safe zone." When using a cementless femoral component, the surgeon has little control of the anteversion of the component since it is dictated by native femoral anteversion. Given this constraint, we asked whether the surgeon should use the native anteversion of the acetabulum as a target for implant position in THA. Forty-six patients scheduled for primary THA underwent CT scanning and preoperative planning using a computer workstation. The native acetabular anteversion and the native femoral anteversion were measured. Prosthetic femoral anteversion was measured on the workstation by three-dimensional templating of a straight-stemmed tapered implant. The mean of the sum of the native acetabular anteversion and native femoral anteversion was 28.9 degrees; however, 17% varied by 10 degrees to 15 degrees and 11% by more than 15 degrees. The mean of native femoral anteversion and prosthetic femoral anteversion was 13.8 degrees (range, -6.1 degrees-32.7 degrees) and 22.5 degrees (range, 1 degrees-39 degrees), respectively. Based on our data, we believe the surgeon should not use the native acetabular anteversion as a target for positioning the acetabular component.

Accuracy of computer navigation for acetabular component placement in THA.

The accuracy and precision of any computer-aided surgical device is critical to its utility. We asked the following question: how accurate and precise are the values measured by an imageless computer navigation system as compared with those measured using postoperative CT scans? Twenty-five patients (26 hips) underwent primary THA using an imageless computer navigation system for placement of the acetabular component. Inclination and anteversion were measured in the operative coordinate system as defined by Murray. Accuracy, precision, and bias were computed, and Bland-Altman analysis was used to assess levels of agreement. The accuracy (mean +/- standard deviation of the absolute difference between computer-assisted navigation and CT) was 1.8 degrees +/- 1.2 degrees for inclination and 2.0 degrees +/- 2.0 degrees for anteversion. Precision was 3.4 degrees for inclination and 5.5 degrees for anteversion. Bias was 0.52 degrees for inclination and 0.35 degrees for anteversion. Limits of agreement were 4.26 degrees for inclination and 5.58 degrees for anteversion. An imageless computer navigation system can precisely determine acetabular cup position.

Minimally invasive bone grafting of cysts of the femoral head and acetabulum in femoroacetabular impingement: arthroscopic technique and case presentation.

Femoroacetabular impingement (FAI) has been recently established as a risk factor in the development of osteoarthritis of the hip. Intraosseous cysts are commonly seen on imaging of FAI. In most cases these cysts are incidental and do not require specific treatment at the time of surgical treatment of hip impingement. However, in some cases the cysts may mechanically compromise the acetabular rim or femoral neck. We present a technique for treating such cysts with an all-arthroscopic technique using a commercially available bone graft substitute composed of cancellous bone and demineralized bone matrix placed within an arthroscopic cannula for direct delivery into the cysts. This technique may be of benefit to surgeons treating FAI with an all-arthroscopic technique.

Femoral neck exostosis, a manifestation of cam/pincer combined femoroacetabular impingement.

We present 2 cases of cam/pincer combined femoroacetabular impingement treated arthroscopically with labral debridement, acetabuloplasty, and femoral head recontouring. In both cases there was essentially no evidence of osteoarthritis of the hip. However, in both cases raised exostoses were evident on the anterolateral femoral neck in the region that commonly comes into contact with the acetabular rim. On the basis of 3-dimensional dynamic reconstructions, we surmise that these exostoses are a direct result of linear contact between the femoral neck and acetabular rim. We recommend that the presence of these exostoses be carefully noted by the arthroscopic hip surgeon and that they be a geographic marker of the zone of contact between the head-neck junction and the acetabular rim and a guide for the area of head osteochondroplasty in combination with appropriate treatment of the acetabular rim.

Acetabular cartilage repair: state of the art in surgical treatment.

Hip preservation has emerged as a developing surgical subspecialty with a variety of tools to address hip joint pain and dysfunction. Cartilage tears and delamination are caused by injury to the hip and can ultimately progress to osteoarthritis. It has been established that the acetabulum is particularly at risk of cartilage injury secondary to trauma, hip dysplasia and hip impingement. In spite of the high frequency of acetabular cartilage lesions based on our experience and the literature, there is no consensus as to the optimal treatment of these lesions. This review article highlights the challenges in treating cartilage injuries of the acetabulum with a particular emphasis on published studies and technical considerations in performing these procedures.

Digital templating and preoperative deformity analysis with standard imaging software.

Analysis of deformity and subsequent correction are the basis for many orthopaedic surgical procedures. In advanced cases of joint degeneration, arthroplasty may be the only available treatment option. Until recently, these analyses and preoperative surgical plans have been performed using standard radiographs, tracing paper, and/or plastic overlays. Numerous customized, commercially available, computer-based preoperative planning software programs have been introduced. The purposes of this study were to describe (1) the techniques used in deformity analysis and preoperative surgical planning using standard radiographs for joint arthroplasty and corrective osteotomies of the extremities, (2) the use of computed tomography (CT) scans to analyze rotational deformities in the presence and absence of joint prostheses and in planning corrective rotational osteotomies or revision joint replacement, and (3) the techniques for analyzing angular deformities of the spine. All these applications were performed with a widely available image analysis software.

Extensive Recontouring of the Femoral Head with Osteochondral Allografting: A Case Report with Histological and MicroCT Analysis.

Morphological abnormalities such as cam deformity or growth disturbances can have a detrimental effect on the smooth function of the hip joint. This case reports an attempt to salvage the hip joint of a young patient with a posttraumatic growth disturbance of the femoral head using a fresh osteochondral allograft. This treatment has been used very rarely in the femoral head due to the presumed tenuous blood supply of the head and the perceived risk of nonunion or progressive avascular necrosis. The patient in this case had persistent pain and mechanical symptoms leading to hip replacement. A detailed analysis of the retrieved femoral head demonstrated durability and healing of the grafts based on gross inspection, histology of bone and cartilage, and microCT analysis. This case is the first report to our knowledge of a detailed histological and radiographic analysis of the fate of osteochondral allografts of the femoral head. We hope that this case provides justification for the use of osteochondral allografts of the femoral head for other indications such as femoral head fractures, avascular necrosis, and benign epiphyseal tumors of the femoral head in an effort to avoid arthroplasty in young patients. The authors have obtained the patient's informed written consent for print and electronic publication of the case report.

Anteroposterior pelvic radiographs to assess acetabular retroversion: high validity of the "cross-over-sign".

Acetabular retroversion has been proposed to contribute to the development of osteoarthritis of the hip. For the diagnosis of this condition, conventional AP pelvic radiographs may represent a reliable, easily available diagnostic modality as they can be obtained with a reproducible technique allowing the anterior and posterior acetabular rims to be visible for assessment. This study was designed to: (i) determine cranial, central, and caudal anatomic acetabular version (AV) from cadaveric specimens; (ii) establish the validity and reliability of the radiographic measurements of central acetabular anteversion; and (iii) determine the validity and reliability of the radiographic "cross-over-sign" to detect acetabular retroversion. Using 43 desiccated pelvises (86 acetabuli) the anatomic AVs were measured at three different transverse planes (cranially, centrally, and caudally). From these pelvises, standardized AP pelvic radiographs were obtained. To directly measure central AV, a modified radiographic method is introduced for the use of AP pelvic radiographs. The validity and reliability of this radiographic method and of the radiographic cross-over-sign to detect cranial acetabular retroversion were determined. The mean central and caudal anatomic AVs were approximately 20 degrees , and the mean cranial AV was 8 degrees . Cranial retroversion (AV < 0 degrees ) was present in 19 of 86 hips (22%). A linear correlation was found between the central and cranial AV. Below 10 degrees of central AV, all acetabuli were cranially retroverted. Between 10 degrees and 20 degrees , 30% of the acetabuli were cranially retroverted, and above 20 degrees , only 1 of 45 acetabuli was cranially retroverted. The radiographic measurement of the central AV (20.3 +/- 6.5 degrees ) correlated strongly with the anatomic AV (20.1 +/- 6.4 degrees ). The sensitivity of the cross-over-sign to detect a cranial acetabular anteversion of less than 4 degrees was 96%, its specificity 95%, and the positive predictive and negative predictive values 90% and 98%, respectively. Both the modified radiographic anteversion measurements and the cross-over-sign demonstrated substantial inter- and intraobserver reliability. Retroversion is almost exclusively a problem of the cranial acetabulum. The cranial AV is on average 12 degrees lower than the central AV, with the latter directly measurable from AP pelvic radiographs. A central AV of less than 10 degrees was associated with cranial retroversion. The presence of a positive cross-over-sign is a highly reliable indicator of cranial AV of <4 degrees.

Fresh osteochondral allografting in the treatment of osteochondritis dissecans of the femoral condyle.

BACKGROUND: The treatment of osteochondritis dissecans in the adult knee can be challenging. As part of our comprehensive treatment program, fresh osteochondral allografts have been used in the surgical management of osteochondritis dissecans of the femoral condyle. HYPOTHESIS: Fresh osteochondral allograft transplantation will provide a successful surgical treatment for osteochondritis dissecans of the femoral condyle. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: Sixty-six knees in 64 patients underwent fresh osteochondral allografting for the treatment of osteochondritis dissecans. Each patient was evaluated both preoperatively and postoperatively using an 18-point modified D'Aubigné and Postel scale. Subjective assessment was performed using a patient questionnaire. Radiographs were evaluated preoperatively and postoperatively. RESULTS: Mean follow-up was 7.7 years (range, 2-22 years). There were 45 men and 19 women with a mean age of 28.6 years (range, 15-54 years). All patients had undergone previous surgery. Forty-one lesions involved the medial femoral condyle, and 25 involved the lateral femoral condyle. All were osteochondritis dissecans type 3 or 4. The mean allograft size was 7.5 cm(2). One knee was lost to follow-up. Of the remaining 65 knees, 47 (72%) were rated good/excellent, 7 (11%) were rated fair, and 1 (2%) was rated poor. Ten patients (15%) underwent reoperation. The mean clinical score improved from 13.0 preoperatively to 16.4 postoperatively (P < .01). Fifty-nine of 64 patients completed questionnaires. Subjective knee function improved from a mean of 3.4 to 8.4 on a 10-point scale (P < .01). CONCLUSION: With greater than 70% good or excellent results, fresh osteochondral allograft transplantation is a successful surgical treatment for osteochondritis dissecans of the femoral condyle.

Linear and angular measurements of computer-generated models: are they accurate, valid, and reliable?

INTRODUCTION: Traditional advanced imaging modalities such as CT and MRI are limited in their ability to perform accurate linear distance and angular measurements regardless of anatomical orientation. The construction of 3D models has been used to perform anthropometric analyses as well as in the reconstruction of rapid prototypes. We hypothesized that such measurements would be precise to within 2 mm or 2 degrees of measurements performed with a coordinate measurement machine (CMM). We also hypothesized that there would be a high degree of interobserver reliability with these measurements. MATERIALS AND METHODS: Multiple aluminum screws were implanted in various positions in three foam pelvises which were subsequently scanned by CT and rendered as 3D models using a commercially available software package (Mimics). Linear and angular measurements were performed using a CMM machine, the software package, and a dial caliper or goniometer. The deviation of the measurements from the CMM data was compared using ANOVA. The interobserver reliability of both the manual and computer-generated measurements was calculated. RESULTS: The mean difference between the CMM distances and those measured manually and with the software was 2.12 +/- 1.20 mm and 1.57 +/- 1.05 mm, respectively. The mean difference between the CMM angular measurements and the angular measurements performed manually and with the software was 4.07 +/- 4.70 degrees and 1.62 +/- 1.32 degrees, respectively. In all cases, the manual measurements were significantly less accurate (p < 0.0001) and there was a high degree of interobserver reliability. CONCLUSIONS: Computer-generated measurements taken from three-dimensionally reconstructed models are more accurate than manual measurements and are within 2 mm and 2 degrees of measurements performed with a CMM. These measurements have high interobserver reliability.

Do small changes in rotation affect measurements of lower extremity limb alignment?

BACKGROUND: The alignment of the lower extremity has important implications in the development of knee arthritis. The effect of incremental rotations of the limb on common parameters of alignment has not been studied. The purpose of the study was to (1) determine the standardized neutral position measurements of alignment and (2) determine the effect of rotation on commonly used measurements of alignment. METHODS: Eighty-seven full length CT angiography studies (49 males and 38 females, average age 66 years old) were included. Three-dimensional models were created using a rendering software program and placed on a virtual plane. An image of the extremity was obtained. Thirty scans were randomly selected, and those models were rotated in 3° intervals around the longitudinal axis and additional images were obtained. RESULTS: In the neutral position, the mechanical lateral distal femoral articular angle (mLDFA) was 85.6 ± 2.3°, medial proximal tibial angle (MPTA) was 86.1 ± 2.8°, and mechanical tibiofemoral angle (mTFA) was -0.7 ± 3.1°. Females had a more valgus alignment with a mTFA of 0.5 ± 2.9° while males had a more varus alignment with a mTFA of -1.7 ± 2.9°. The anatomic tibiofemoral angle (aTFA) was 4.8 ± 2.6°, the anatomic lateral distal femoral angle (aLDFA) measured 80.2 ± 2.2°, and the anatomical-mechanical angle (AMA) was 5.4 ± 0.7°. The prevalence of constitutional varus was 18%. The effect of rotation on the rotated scans led to statistically significant differences relative to the 0° measurement for all measurements. These effects may be small, and their clinical importance is unknown. CONCLUSIONS: This study provides new information on standardized measures of lower extremity alignment and the relationship between discreet axial rotations of the entire lower extremity and these parameters.