RESUMO
Calcium phosphate cements (CPCs) are regarded as promising graft substitutes for bone tissue engineering. However, their wide use is limited by the high cost associated with the complex synthetic processes involved in their fabrication. Cheaper xenogeneic calcium phosphate (CaP) materials derived from waste animal bone may solve this problem. Moreover, the surface topography, mechanical strength, and cellular function of CPCs are influenced by the ratio of micro- to nano-sized CaP (M/NCaP) particles. In this study, we developed waste equine bone (EB)-derived CPCs with various M/NCaP particle ratios to examine the potential capacity of EB-CPCs for bone grafting materials. Our study showed that increasing the number of NCaP particles resulted in reductions in roughness and porosity while promoting smoother surfaces of EB-CPCs. Changes in the chemical properties of EB-CPCs by NCaP particles were observed using X-ray diffractometry. The mechanical properties and cohesiveness of the EB-CPCs improved as the NCaP particle content increased. In an in vitro study, EB-CPCs with a greater proportion of MCaP particles showed higher cell adhesion. Alkaline phosphatase activity indicated that osteogenic differentiation by EB-CPCs was promoted with increased NCaP particle content. These results could provide a design criterion for bone substitutes for orthopedic disease, including periodontal bone defects.
Assuntos
Células-Tronco Mesenquimais , Animais , Cimentos Ósseos/farmacologia , Substitutos Ósseos/farmacologia , Fosfatos de Cálcio/farmacologia , Cavalos , Humanos , Teste de Materiais , OsteogêneseRESUMO
In recent decades, cultured meat has received considerable interest as a sustainable alternative to traditional meat products, showing promise for addressing the inherent problems associated with conventional meat production. However, current limitations on the scalability of production and extremely high production costs have prevented their widespread adoption. Therefore, it is important to develop novel engineering strategies to overcome the current limitations in large-scale cultured meat production. Such engineering considerations have the potential for advancements in cultured meat production by providing innovative and effective solutions to the prevailing challenges. In this review, we discuss how engineering strategies have been utilized to advance cultured meat technology by categorizing the production processes of cultured meat into three distinct steps: (1) cell preparation; (2) cultured meat fabrication; and (3) cultured meat maturation. For each step, we provide a comprehensive discussion of the recent progress and its implications. In particular, we focused on the engineering considerations involved in each step of cultured meat production, with specific emphasis on large-scale production.
RESUMO
Personalized medicine aims to provide tailored medical treatment that considers the clinical, genetic, and environmental characteristics of patients. iPSCs have attracted considerable attention in the field of personalized medicine; however, the inherent limitations of iPSCs prevent their widespread use in clinical applications. That is, it would be important to develop notable engineering strategies to overcome the current limitations of iPSCs. Such engineering approaches could lead to significant advances in iPSC-based personalized therapy by offering innovative solutions to existing challenges, from iPSC preparation to clinical applications. In this review, we summarize how engineering strategies have been used to advance iPSC-based personalized medicine by categorizing the development process into three distinctive steps: 1) the production of therapeutic iPSCs; 2) engineering of therapeutic iPSCs; and 3) clinical applications of engineered iPSCs. Specifically, we focus on engineering strategies and their implications for each step in the development of iPSC-based personalized medicine.
RESUMO
Three-dimensional bioprinting represents an innovative platform for fabricating intricate, three-dimensional (3D) tissue structures that closely resemble natural tissues. The development of hybrid bioinks is an actionable strategy for integrating desirable characteristics of components. In this study, cellulose recovered from plum seed was processed to synthesize carboxymethyl cellulose (CMC) for 3D bioprinting. The plum seeds were initially subjected to α-cellulose recovery, followed by the synthesis and characterization of plum seed-derived carboxymethyl cellulose (PCMC). Then, hybrid bioinks composed of PCMC and sodium alginate were fabricated, and their suitability for extrusion-based bioprinting was explored. The PCMC bioinks exhibit a remarkable shear-thinning property, enabling effortless extrusion through the nozzle and maintaining excellent initial shape fidelity. This bioink was then used to print muscle-mimetic 3D structures containing C2C12 cells. Subsequently, the cytotoxicity of PCMC was evaluated at different concentrations to determine the maximum acceptable concentration. As a result, cytotoxicity was not observed in hydrogels containing a suitable concentration of PCMC. Cell viability was also evaluated after printing PCMC-containing bioinks, and it was observed that the bioprinting process caused minimal damage to the cells. This suggests that PCMC/alginate hybrid bioink can be used as a very attractive material for bioprinting applications.
RESUMO
Developing a scaffold for efficient and functional bone regeneration remains challenging. To accomplish this goal, a "scaffold-on-a-chip" device was developed as a platform to aid with the evaluation process. The device mimics a microenvironment experienced by a transplanted bone scaffold. The device contains a circular space at the center for scaffold insert and microfluidic channel that encloses the space. Such a design allows for monitoring of cell behavior at the blood-scaffold interphase. MC3T3-E1 cells were cultured with three different types of scaffold inserts to test its capability as an evaluation platform. Cellular behaviors, including migration, morphology, and osteogenesis with each scaffold, were analyzed through fluorescence images of live/dead assay and immunocytochemistry. Cellular behaviors, such as migration, morphology, and osteogenesis, were evaluated. The results revealed that our platform could effectively evaluate the osteoconductivity and osteoinductivity of scaffolds with various properties. In conclusion, our proposed platform is expected to replace current in vivo animal models as a highly relevant in vitro platform and can contribute to the fundamental study of bone regeneration.
Assuntos
Osteogênese , Alicerces Teciduais , Animais , Alicerces Teciduais/química , Regeneração Óssea , Impressão Tridimensional , Dispositivos Lab-On-A-ChipRESUMO
The near-perivascular accumulation in solid tumors and short-lived span in circulation, derails even the most competent nanoparticles (NPs) from achieving their maximum therapeutic potential. Moreover, delivering them across the blood brain/tumor barrier (BBB/BTB) is further challenging to sought anticancer effect. To address these key challenges, we designed a linearly aligned nucleic acid-complexed polydixylitol-based polymeric nanochains (X-NCs), with inherent hyperosmotic properties enabling transmigration of the BBB/BTB and navigation through deeper regions of the brain tumor. The high aspect ratio adds shape-dependent functional aspects to parent particles by providing effective payload increment and nuclear factor of activated T cells-5 (NFAT5)-mediated cellular uptake. Therefore, serine hydroxymethyltransferase 1 (SHMT1) siRNA-loaded nanochains not only demonstrated to transmigrate the BTB, but also resulted in remarkably reducing the tumor size to 97% in the glioblastoma xenograft brain tumor mouse models. Our study illustrates how the hyperosmotic nanochains with high aspect ratio and aligned structure can accelerate a therapeutic effect in aggressive brain tumors post-transmigration of the BBB/BTB by utilizing an NFAT5 mode of uptake mechanism.
Assuntos
Neoplasias Encefálicas , Glioblastoma , Nanopartículas , Animais , Barreira Hematoencefálica/patologia , Neoplasias Encefálicas/patologia , Glioblastoma/patologia , Humanos , Camundongos , RNA Interferente Pequeno/uso terapêuticoRESUMO
Natural calcium phosphate cements (CPCs) derived from sintered animal bone have been investigated to treat bone defects, but their low mechanical strength remains a critical limitation. Graphene improves the mechanical properties of scaffolds and promotes higher osteoinduction. To this end, reduced graphene oxide-incorporated natural calcium phosphate cements (RGO-CPCs) are fabricated for reinforcement of CPCs' characteristics. Pulsed electromagnetic fields (PEMFs) were additionally applied to RGO-CPCs to promote osteogenic differentiation ability. The fabricated RGO-CPCs show distinct surface properties and chemical properties according to the RGO concentration. The RGO-CPCs' mechanical properties are significantly increased compared to CPCs owing to chemical bonding between RGO and CPCs. In in vitro studies using a mouse osteoblast cell line and rat-derived adipose stem cells, RGO-CPCs are not severely toxic to either cell type. Cell migration study, western blotting, immunocytochemistry, and alizarin red staining assay reveal that osteoinductivity as well as osteoconductivity of RGO-CPCs was highly increased. In in vivo study, RGO-CPCs not only promoted bone ingrowth but also enhanced osteogenic differentiation of stem cells. Application of PEMFs enhanced the osteogenic differentiation of stem cells. RGO-CPCs with PEMFs can overcome the flaws of previously developed natural CPCs and are anticipated to open the gate to clinical application for bone repair and regeneration.
RESUMO
Periodontal diseases occur through bacterial infection in the oral cavity, which can cause alveolar bone loss. Several efforts have been made to reconstruct alveolar bone, such as grafting bone substitutes and 3D-printed scaffolds. Poly(ε-caprolactone) (PCL) is biocompatible and biodegradable, thus demonstrating its potential as a biomaterial substitute; however, it is difficult for cells to adhere to PCL because of its strong hydrophobicity. Therefore, its use as a biomaterial has limitations. In this study, we used graphene oxide (GO) as a coating material to promote the osteogenic differentiation ability of PCL scaffolds. First, 3D-printed PCL scaffolds were fabricated, and the oxygen plasma treatment and coating conditions were established according to the concentration of GO. The physical and chemical properties of the prepared scaffolds were evaluated through water contact angle analysis, Raman spectroscopy, and image analysis. In addition, the adhesion and proliferation of periodontal ligament stem cells (PDLSCs) on the GO scaffolds were assessed via the water-soluble tetrazolium salt-1 (WST-1) assay, and the osteogenic differentiation ability was evaluated through alizarin red S staining. The results confirmed that the cell proliferation and osteogenic differentiation of the PDLSCs were enhanced in the scaffolds coated with oxygen plasma and GO. In conclusion, the plasma-treated GO-coating method that we developed can be used to promote the cell proliferation and osteogenic differentiation of the scaffolds.
RESUMO
Endoscopic submucosal dissection (ESD) is a surgical procedure to remove early neoplastic lesions in the gastrointestinal tract with the critical issue of perforation. A submucosal fluid cushion, such as normal saline, is used as a cushioning agent to prevent perforation; however, its cushioning maintenance is insufficient for surgery. In this study, we introduce an injectable thermosensitive chitosan solution (CS) with ß-glycerophosphate (ß-GP) as a submucosal injection agent for ESD. The CS/ß-GP system with optimal ß-GP concentration showed drastic viscosity change near body temperature while other commercial products did not. Additionally, the injectability of the solution was similar to or greater than other commercial products. The solution with low ß-GP concentration showed low cytotoxicity similar to other products. An in vivo preclinical study illustrated maintenance of the high cushioning of the thermosensitive solutions. These results indicate that a CS/ß-GP system with optimal ß-GP concentration might be used as a submucosal injection agent in ESD, and further studies are needed to validate the effectiveness of the solutions in vivo.
RESUMO
Supramolecular hydrogels are considered promising drug carriers in the tissue engineering field due to their versatile nature. Chitosan hydrogels without chemical cross-linkers have low cytotoxicity and good delivery capacity; however, they have lower mechanical properties for injectable hydrogel usage. In this study, we developed novel chitosan derivatives via click chemistry for fabricating supramolecular hydrogels with higher mechanical strength under mild conditions. The chitosan derivative was successfully synthesized by a sulfur fluoride exchange reaction, and the synthesized chitosan-mPEG/Pluronic-F127 (CS-mPEG/F127) interacted with α-cyclodextrin (α-CD) to form a supramolecular hydrogel via a host-guest reaction. The gelation dynamics, hydrogel properties, and bovine serum albumin (BSA) release could be modulated by the concentration ratio of chitosan-mPEG and F127. This supramolecular hydrogel is a promising protein releasing carrier candidate for long term regeneration therapy.
RESUMO
The 3D-printed bioactive ceramic incorporated Poly(ε-caprolactone) (PCL) scaffolds show great promise as synthetic bone graft substitutes. However, 3D-printed scaffolds still lack adequate surface properties for cells to be attached to them. In this study, we modified the surface characteristics of 3D-printed poly(ε-caprolactone)/hydroxyapatite scaffolds using O2 plasma and sodium hydroxide. The surface property of the alkaline hydrolyzed and O2 plasma-treated PCL/HA scaffolds were evaluated using field-emission scanning microscopy (FE-SEM), Alizarin Red S (ARS) staining, and water contact angle analysis, respectively. The in vitro behavior of the scaffolds was investigated using human dental pulp-derived stem cells (hDPSCs). Cell proliferation of hDPSCs on the scaffolds was evaluated via immunocytochemistry (ICC) and water-soluble tetrazolium salt (WST-1) assay. Osteogenic differentiation of hDPSCs on the scaffolds was further investigated using ARS staining and Western blot analysis. The result of this study shows that alkaline treatment is beneficial for exposing hydroxyapatite particles embedded in the scaffolds compared to O2 plasma treatment, which promotes cell proliferation and differentiation of hDPSCs.
RESUMO
Hydroxyapatite (HA) is a representative substance that induces bone regeneration. Our research team extracted nanohydroxyapatite (EH) from natural resources, especially equine bones, and developed it as a molecular biological tool. Polyethylenimine (PEI) was used to coat the EH to develop a gene carrier. To verify that PEI is well coated in the EH, we first observed the morphology and dispersity of PEI-coated EH (pEH) by electron microscopy. The pEH particles were well distributed, while only the EH particles were not distributed and aggregated. Then, the existence of nitrogen elements of PEI on the surface of the pEH was confirmed by EDS, calcium concentration measurement and fourier transform infrared spectroscopy (FT-IR). Additionally, the pEH was confirmed to have a more positive charge than the 25 kD PEI by comparing the zeta potentials. As a result of pGL3 transfection, pEH was better able to transport genes to cells than 25 kD PEI. After verification as a gene carrier for pEH, we induced osteogenic differentiation of DPSCs by loading the BMP-2 gene in pEH (BMP-2/pEH) and delivering it to the cells. As a result, it was confirmed that osteogenic differentiation was promoted by showing that the expression of osteopontin (OPN), osteocalcin (OCN), and runt-related transcription factor 2 (RUNX2) was significantly increased in the group treated with BMP-2/pEH. In conclusion, we have not only developed a novel nonviral gene carrier that is better performing and less toxic than 25 kD PEI by modifying natural HA (the agricultural byproduct) but also proved that bone differentiation can be effectively promoted by delivering BMP-2 with pEH to stem cells.
RESUMO
The use of bone graft materials is required for the treatment of bone defects damaged beyond the critical defect; therefore, injectable calcium phosphate cement (CPC) is actively used after surgery. The application of various polymers to improve injectability, mechanical strength, and biological function of injection-type CPC is encouraged. We previously developed a chitosan-PEG conjugate (CS/PEG) by a sulfur (VI) fluoride exchange reaction, and the resulting chitosan derivative showed high solubility at a neutral pH. We have demonstrated the CPC incorporated with a poly (ethylene glycol) (PEG)-grafted chitosan (CS/PEG) and developed CS/PEG CPC. The characterization of CS/PEG CPC was conducted using Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD). The initial properties of CS/PEG CPCs, such as the pH, porosity, mechanical strength, zeta potential, and in vitro biocompatibility using the WST-1 assay, were also investigated. Moreover, osteocompatibility of CS/PEG CPCs was carried out via Alizarin Red S staining, immunocytochemistry, and Western blot analysis. CS/PEG CPC has enhanced mechanical strength compared to CPC, and the cohesion test also demonstrated in vivo stability. Furthermore, we determined whether CS/PEG CPC is a suitable candidate for promoting the osteogenic ability of Dental Pulp Stem Cells (DPSC). The elution of CS/PEG CPC entraps more calcium ion than CPC, as confirmed through the zeta potential test. Accordingly, the ion trapping effect of CS/PEG is considered to have played a role in promoting osteogenic differentiation of DPSCs. The results strongly suggested that CS/PEG could be used as suitable additives for improving osteogenic induction of bone substitute materials.
RESUMO
Post-surgery failure of dental implants due to alveolar bone loss is currently critical, disturbing the quality of life of senior dental patients. To overcome this problem, bioceramic or bone graft material is loaded into the defect. However, connective tissue invasion instead of osteogenic tissue limits bone tissue regeneration. The guided bone regeneration concept was adapted to solve this problem and still has room for improvements, such as biochemical similarity or oriented structure. In this article, an aligned electrospun-guided bone regeneration barrier with xenograft equine bone-derived nano hydroxyapatite (EBNH-RB) was fabricated by electrospinning EBNH/PCL solution on high-speed rotating drum collector and fiber characterization, viability and differentiation enhancing properties of mesenchymal dental pulp stem cell on the barrier was determined. EBNH-RB showed biochemical and structural similarity to natural bone tissue electron microscopy image analysis and x-ray diffractometer analysis, and had a significantly better effect in promoting osteogenesis based on the increased bioceramic content by promoting cell viability, calcium deposition and osteogenic marker expression, suggesting that they can be successfully applied to regenerate alveolar bone as a guided bone regeneration barrier.
RESUMO
Chronic tympanic membrane (TM) perforations can cause otorrhea. To date, various types of tissue engineering techniques have been applied for the regeneration of chronic TM perforations. However, the application of nanofibers with radially aligned nanostructures and the simultaneous release of growth factors have never been applied in the regeneration of chronic TM perforations. Here, epidermal growth factor (EGF)-releasing radially aligned nanofibrous patches (ERA-NFPs) are developed and applied for the regeneration of chronic perforated TMs. First, radial alignments and the presence of EGF in the ERA-NFPs are analyzed. EGF is confirmed to be released from the ERA-NFPs until 8 weeks. In an in vitro study, cell viability assay, immunocytochemistry, and wound-healing assay indicate rational enhancement of healing by the combination of radial alignments and EGF release. The effect of ERA-NFPs on TM cells is revealed by quantitative real-time polymerase chain reaction. An in vivo animal study shows that the ERA-NFPs effectively stimulates the healing of the chronic TM perforations. The TMs healed by ERA-NFPs show histological properties similar to those of normal TMs. These results indicate that ERA-NFPs may be an efficient platform for the regeneration of chronic TM perforations, laying the foundation for nonsurgical treatments of chronic otitis media.
Assuntos
Fator de Crescimento Epidérmico/farmacocinética , Nanofibras/administração & dosagem , Nanofibras/química , Perfuração da Membrana Timpânica/terapia , Animais , Sobrevivência Celular/efeitos dos fármacos , Liberação Controlada de Fármacos , Fator de Crescimento Epidérmico/química , Feminino , Regulação da Expressão Gênica/efeitos dos fármacos , Regeneração Tecidual Guiada/métodos , Microscopia Eletrônica de Varredura , Ratos Sprague-Dawley , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
c-Jun N-terminal kinase 2 (JNK2) is primarily responsible for the oncogenic transformation of the transcription factor c-Jun. Expression of the proto-oncogene c-Jun progresses the cell cycle from G1 to S phase, but when its expression becomes awry it leads to uncontrolled proliferation and angiogenesis. Delivering a JNK2 siRNA (siJNK2) in tumor tissue was anticipated to reverse the condition with subsequent onset of apoptosis which predominantly requires an efficient delivering system capable of penetrating through the compact tumor mass. In the present study, it was demonstrated that polymannitol-based vector (PMGT) with inherent hyperosmotic properties was able to penetrate through and deliver the siJNK2 in the subcutaneous tumor of xenograft mice. Hyperosmotic activity of polymannitol was shown to account for the enhanced therapeutic delivery both in vitro and in vivo because of the induction of cyclooxygenase-2 (COX-2) which stimulates caveolin-1 for caveolae-mediated endocytosis of the polyplexes. Further suppression of JNK2 and hence c-Jun expression led to the activation of caspase-9 to induce apoptosis and inhibition of tumor growth in xenograft mice model. The study exemplifies PMGT as an efficient vector for delivering therapeutic molecules in compact tumor tissue and suppression of JNK2 introduces a strategy to inhibit tumor progression.
Assuntos
Caspase 9/metabolismo , Progressão da Doença , Inativação Gênica , Proteína Quinase 9 Ativada por Mitógeno/deficiência , Proteína Quinase 9 Ativada por Mitógeno/genética , Osmose , Polímeros/química , Células A549 , Animais , Apoptose/genética , Transformação Celular Neoplásica , Ciclo-Oxigenase 2/biossíntese , Portadores de Fármacos/química , Portadores de Fármacos/metabolismo , Endocitose/genética , Ativação Enzimática/efeitos dos fármacos , Indução Enzimática/genética , Regulação Neoplásica da Expressão Gênica/genética , Técnicas de Silenciamento de Genes , Humanos , Manitol/química , Camundongos , Camundongos Endogâmicos BALB C , Polímeros/metabolismo , Proto-Oncogene Mas , RNA Interferente Pequeno/química , RNA Interferente Pequeno/genética , Carga Tumoral/genéticaRESUMO
Bio-electrospray technology is a very attractive tool for preparing scaffolds and depositing desired solutions on various targets by electric force. In this study, we focused on the application of a bio-electrospray (BES) technique to spray cells on the target and to simultaneously deliver genetic constructs into the cells, called non-viral gene delivery-based bio-electrospray (NVG-BES). Using this method, we tried to harvest the electric charge produced during electrospray for the cellular internalization of cationic polymer/DNA nanoparticles as well as the delivery of living cells on the desired substrate. Furthermore, we optimized the voltage, culture medium and polymeric cationic charges for high transfection efficiency and cell viability during NVG-BES. As a result, the solutions used during the NVG-BES process played an important role in improving transfection efficiency. We determined that a voltage of 10 kV with PBS as the spraying solution showed high transfection efficiency, probably due to the facilitation of cationic polymer/DNA nanocomplexes in cellular internalization and their subsequent expression. In conclusion, NVG-BES, as a novel method, is expected to deliver genes to cells and simultaneously deliver transfected cells to any substrate or scaffold.
RESUMO
[This corrects the article DOI: 10.1039/C7RA12477E.].
RESUMO
Low power light (LPL) treatment has been widely used in various clinical trials, which has been known to reduce pain and inflammation and to promote wound healing. LPL was also shown to enhance differentiation of stem cells into specific lineages. However, most studies have used high power light in mW order, and there was lack of studies about the effects of very low power light in µW. In this study, we applied 810 nm LPL of 128 µW/cm2 energy density in vitro. Upon this value, continuous wave (CW) irradiation did not induce any significant changes for differentiation of human dental pulp stem cells (hDPSCs). However, the membrane hyperpolarization, alkaline phosphatase activity, and intracellular oxidative stress were largely enhanced in the pulsed wave (PW) with 30% of duty cycle and 300-3000 Hz frequencies-LPL in which LED driver work in the form of square wave. After 21 days of daily LPL treatment, Western blot revealed the dentinogenesis in this condition in vitro. This study demonstrates that the very low power light at 810 nm enhanced significant differentiation of hDPSCs in the PW mode and there were duty cycle dependency as well as pulsing frequency dependency in the efficiency.
Assuntos
Células-Tronco Adultas/citologia , Polpa Dentária/citologia , Dentinogênese , Luz , Fototerapia/métodos , Células-Tronco Adultas/efeitos da radiação , Células Cultivadas , Polpa Dentária/efeitos da radiação , Humanos , Fototerapia/instrumentaçãoRESUMO
Damage to the eardrum causes acute pain and can lead to chronic otitis media if it develops into chronic tympanic membrane (TM) perforations. Chronic TM perforations are usually treated with surgical methods such as tympanoplasty and myringoplasty. However, these surgeries are not only complicated and difficult but also cost a lot of money. Our research team developed chitosan patches (E-CPs) that release epidermal growth factor (EGF) as a patch therapy to replace surgical methods. However, there was a limitation in the healing ratio of the treatment compared to the surgical methods. In this study, we developed EGF and epidermal growth factor receptor (EGFR) gene-releasing polyethyleneimine (PEI)/chitosan patches (EErP-CPs) to increase the regeneration of TM perforations. The addition of PEI increased the adhesion and migration ability of TM cells on the patches. The simultaneous release of the EGF and the EGFR gene further enhanced TM cell proliferation, adhesion and migratory ability. It was confirmed that the EGF protein and EGFR gene were released for 30 days; however, EGF was released and increased TM cell viability almost immediately after treatment and EGFR took a minimum of 3 days before showing its effect on improved cell viability. It was also shown that EErP-CPs are more hydrophilic and have more positive charge than E-CP because of added amine groups from PEI. In conclusion, the developed EErP-CPs resulted in the improved healing of TM perforations and can potentially be applied to the regeneration of both chronic and acute tympanic membrane perforations.