Morphology and thermodynamic properties of a copolymer with an electronically conducting block: poly(3-ethylhexylthiophene)-block-poly(ethylene oxide).

We report on the synthesis and morphology of a block copolymer, poly(3-(2'-ethylhexyl)thiophene)-b-poly(ethylene oxide) (P3EHT-b-PEO), that conducts both electrons and ions. We show that in the melt state the P3EHT-b-PEO chains self-assemble to produce traditional nanoscale morphologies such as lamellae and gyroid. This is in contrast to a majority of previous studies on copolymers with electronically conducting blocks wherein a nanofibrillar morphology is obtained. Our approach enables estimation of the Flory-Huggins interaction parameter, χ. The segregation strength between the two blocks is controlled through the addition of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). For the salt-free sample, the gyroid morphology, obtained in the melt state, is transformed into lamellae below the melting temperature of the P3EHT block. This is due to the "breaking out" of the crystalline phase. For the salt-containing sample, P3EHT-b-PEO has a lamellar morphology in both melt and crystalline states (confined crystallization).

Simultaneous electronic and ionic conduction in a block copolymer: application in lithium battery electrodes.

Charging ahead: separate values for the simultaneous electronic and ionic conductivity of a conjugated polymer containing poly(3-hexylthiophene) and poly(ethylene oxide) (P3HT-PEO) were determined by using ac impedance and dc techniques. P3HT-PEO was used as binder, and transporter of electronic charge and Li(+) ions in a LiFePO(4) cathode, which was incorporated into solid-state lithium batteries.

Relationship between Mobility and Lattice Strain in Electrochemically Doped Poly(3-hexylthiophene).

Conjugated semiconducting polymers, such as poly(3-hexylthiophene) (P3HT), are poised to play an integral role in the development of organic electronic devices; however, their performance is governed by factors that are intrinsically coupled: dopant concentration, carrier mobility, crystal structure, and mesoscale morphology. We utilize synchrotron X-ray scattering and electrochemical impedance spectroscopy to probe the crystal structure and electronic properties of P3HT in situ during electrochemical doping. We show that doping strains the crystalline domains, coincident with an exponential increase in hole mobility. We believe these observations provide guidance for the development of improved theoretical models for charge transport in semiconducting polymers.

Electrochemically oxidized electronic and ionic conducting nanostructured block copolymers for lithium battery electrodes.

Block copolymers that can simultaneously conduct electronic and ionic charges on the nanometer length scale can serve as innovative conductive binder material for solid-state battery electrodes. The purpose of this work is to study the electronic charge transport of poly(3-hexylthiophene)-b-poly(ethylene oxide) (P3HT-PEO) copolymers electrochemically oxidized with lithium bis(trifluoromethanesulfonyl) imide (LiTFSI) salt in the context of a lithium battery charge/discharge cycle. We use a solid-state three-terminal electrochemical cell that enables simultaneous conductivity measurements and control over electrochemical doping of P3HT. At low oxidation levels (ratio of moles of electrons removed to moles of 3-hexylthiophene moieties in the electrode), the electronic conductivity (σe,ox) increases from 10(-7) S/cm to 10(-4) S/cm. At high oxidation levels, σe,ox approaches 10(-2) S/cm. When P3HT-PEO is used as a conductive binder in a positive electrode with LiFePO4 active material, P3HT is electrochemically active within the voltage window of a charge/discharge cycle. The electronic conductivity of the P3HT-PEO binder is in the 10(-4) to 10(-2) S/cm range over most of the potential window of the charge/discharge cycle. This allows for efficient electronic conduction, and observed charge/discharge capacities approach the theoretical limit of LiFePO4. However, at the end of the discharge cycle, the electronic conductivity decreases sharply to 10(-7) S/cm, which means the "conductive" binder is now electronically insulating. The ability of our conductive binder to switch between electronically conducting and insulating states in the positive electrode provides an unprecedented route for automatic overdischarge protection in rechargeable batteries.

Simultaneous conduction of electronic charge and lithium ions in block copolymers.

The main objective of this work is to study charge transport in mixtures of poly(3-hexylthiophene)-b-poly(ethylene oxide) (P3HT-PEO) block copolymers and lithium bis(trifluoromethanesulfonyl) imide salt (LiTFSI). The P3HT-rich microphase conducts electronic charge, while the PEO-rich microphase conducts ionic charge. The nearly symmetric P3HT-PEO copolymer used in this study self-assembles into a lamellar phase. In contrast, the morphologies of asymmetric copolymers with P3HT as the major component are dominated by nanofibrils. A combination of ac and dc impedance measurements was used to determine the electronic and ionic conductivities of our samples. The ionic conductivities of P3HT-PEO/LiTFSI mixtures are lower than those of mixtures of PEO homopolymer and LiTFSI, in agreement with published data obtained from other block copolymer/salt mixtures. In contrast, the electronic conductivities of the asymmetric P3HT-PEO copolymers are significantly higher than those of the P3HT homopolymer. This is unexpected because of the presence of the nonelectronically conducting PEO microphase. This implies that the intrinsic electronic conductivity of the P3HT microphase in P3HT-PEO copolymers is significantly higher than that of P3HT homopolymers.