Emerging Vanadium-Doped Cobalt Chloride Carbonate Hydroxide for Flexible Electrochromic Micro-Supercapacitor: Charged-State Prediction from RGB Input by ANN Model.

Multifunctional devices integrated with electrochromic and supercapacitance properties are fascinating because of their extensive usage in modern electronic applications. In this work, vanadium-doped cobalt chloride carbonate hydroxide hydrate nanostructures (V-C3H NSs) are successfully synthesized and show unique electrochromic and supercapacitor properties. The V-C3H NSs material exhibits a high specific capacitance of 1219.9 F g-1 at 1 mV s-1 with a capacitance retention of 100% over 30 000 CV cycles. The electrochromic performance of the V-C3H NSs material is confirmed through in situ spectroelectrochemical measurements, where the switching time, coloration efficiency (CE), and optical modulation (∆T) are found to be 15.7 and 18.8 s, 65.85 cm2 C-1 and 69%, respectively. A coupled multilayer artificial neural network (ANN) model is framed to predict potential and current from red (R), green (G), and blue (B) color values. The optimized V-C3H NSs are used as the active materials in the fabrication of flexible/wearable electrochromic micro-supercapacitor devices (FEMSDs) through a cost-effective mask-assisted vacuum filtration method. The fabricated FEMSD exhibits an areal capacitance of 47.15 mF cm-2 at 1 mV s-1 and offers a maximum areal energy and power density of 104.78 Wh cm-2 and 0.04 mW cm-2, respectively. This material's interesting energy storage and electrochromic properties are promising in multifunctional electrochromic energy storage applications.

Selective electrochemical nitrogen fixation to ammonia catalyzed by a novel microporous vanadium phosphonate via the distal pathway.

Herein, a microporous organic-inorganic hybrid, vanadium phosphonate (VPn) material has been developed. With the combined advantages of the periodic organic-inorganic skeleton, a regular microporous channel with a crystalline pore wall, and good surface area, VPn displays electrocatalytic NRR activity with a selective NH3 yield (11.84 µg h-1 mgcat-1), faradaic efficiency of 26.29% at -0.6 V and high stability up to 15 h. The isotopic labeling experiment also verifies the electrosynthesis of NH3 both qualitatively and quantitatively. The theoretical simulation reveals that the associative distal route serves as the most favourable pathway during the NRR, with the first protonation step of *N2 leading to *NNH as the potential determining step.

A bioinspired approach for shaping Au nanostructures: the role of biomolecule structures in shape evolution.

A new approach for shaping Au nanostructures by tuning the molecular structure of biomolecules has been explored. Different molecules, such as catechol, rutin, and quercetin, which have structural similarity to the catechol ring, were used to induce Au nanostructures under similar conditions. The as-synthesized nanostructures are characterized by using TEM, XPS, XRD, and UV/Vis spectral measurements. The growth mechanism for the formation of these noble metal shapes and the role of the molecular structure of the stabilizing/reducing agent were investigated by using TEM and UV/Vis spectral measurements. The structure and functional groups of the reducing/stabilizing agent play a vital role in the shape evolution of nanostructures. The electrocatalytic activity of different nanostructures in the reduction of oxygen was investigated and was found to be shape-dependent.

Hydrogen-Bonded Organic Framework Structure: A Metal-Free Electrocatalyst for the Evolution of Hydrogen.

The hydrogen-bonded organic frameworks (HOFs) have gained significant attention due to their various alluring applications in the fascinating field of supramolecular chemistry. Herein, we report the electrocatalytic activity of HOFs toward the hydrogen evolution reaction (HER) by utilizing the molecular adduct of cyanuric and trithiocyanuric acid with various organic substrates (melamine and 4,4'-bipyridine). Both the experimental and theoretical findings provide insights and validate the electrocatalytic activity toward HER applications. This work contributes significantly to designing novel highly efficient metal-free HOF-based electrocatalysts for the HER.

Concerted effect of Ni-in and S-out on ReS2 nanostructures towards high-efficiency oxygen evolution reaction.

Herein, a one-step hydrothermal reaction is developed to synthesize a Ni-doped ReS2 nanostructure with sulphur defects. The material exhibited excellent OER activity with a current density of 10 mA cm-2 at an overpotential of 270 mV, a low Tafel slope of 31 mV dec-1, and good long-term durability of 10 h in 1 M KOH. It shows high faradaic efficiency of 96%, benefiting from the rapid charge transfer caused by the concerted effect of Ni-in and S-out on the ReS2 nanostructure.

Highly sensitive detection of exocytotic dopamine release using a gold-nanoparticle-network microelectrode.

Here we report a new type of microelectrode sensor for single-cell exocytotic dopamine release. The new microsensor is built by forming a gold-nanoparticle (AuNP) network on a carbon fiber microelectrode. First a gold surface is obtained on a carbon fiber microdisk electrode by partially etching away the carbon followed by electrochemical deposition of gold into the pore. The gold surface is chemically functionalized with a sol-gel silicate network derived from (3-mercaptopropyl)trimethoxysilane (MPTS). A AuNP network is formed by immobilizing Au nanoparticles onto the thiol groups in the sol-gel silicate network. The AuNP-network microelectrode has been characterized by scanning electron microscopy (SEM) and steady-state voltammetry. The AuNP-network microelectrode has been used for amperometric detection of exocytotic dopamine secretion from individual pheochromocytoma (PC12) cells. The results show significant differences in the kinetic peak parameters including shorter rise time, decay time, and half-width as compared to a bare carbon fiber electrode equivalent. These results indicate AuNP-network microelectrodes possess an excellent sensing activity for single-cell exocytotic catecholamine release, specifically dopamine. Moreover, key advantageous properties inherent to bare carbon fiber microelectrodes (i.e., rigidity, flexibility, and small size) are maintained in addition to an observed prolonged shelf life stability and resistance to cellular debris fouling and dopamine polymerization.

Metal-Free Triazine-Based 2D Covalent Organic Framework for Efficient H2 Evolution by Electrochemical Water Splitting.

Hydrogen evolution reaction (HER) by electrochemical water splitting is one of the most active areas of energy research, yet the benchmark electrocatalysts used for this reaction are based on expensive noble metals. This is a major bottleneck for their large-scale operation. Thus, development of efficient metal-free electrocatalysts is of paramount importance for sustainable and economical production of the renewable fuel hydrogen by water splitting. Covalent organic frameworks (COFs) show much promise for this application by virtue of their architectural stability, nanoporosity, abundant active sites located periodically throughout the framework, and high electronic conductivity due to extended π-delocalization. This study concerns a new COF material, C6 -TRZ-TFP, which is synthesized by solvothermal polycondensation of 2-hydroxybenzene-1,3,5-tricarbaldehyde (TFP) and 4,4',4''-(1,3,5-triazine-2,4,6-triyl)tris[(1,1'-biphenyl)-4-amine]. C6 -TRZ-TFP displayed excellent HER activity in electrochemical water splitting, with a very low overpotential of 200 mV and specific activity of 0.2831 mA cm-2 together with high retention of catalytic activity after a long duration of electrocatalysis in 0.5 m aqueous H2 SO4 . Density functional theory calculations suggest that the electron-deficient carbon sites near the π electron-donating nitrogen atoms are more active towards HER than those near the electron-withdrawing nitrogen and oxygen atoms.

Au disk nanoelectrode by electrochemical deposition in a nanopore.

In this technical note, we report a process in scaling down the fabrication of Au disk nanoelectrodes as small as approximately 4 nm in radii. We have developed a bottom-up approach toward the fabrication of individual disk-shape Au nanoelectrodes. This new approach is based upon electrochemical deposition of Au in a silica nanopore electrode and involves the following four steps. First, a laser-assisted pulling process is employed to fabricate a disk-shape Pt nanoelectrode. Second, a Pt nanopore electrode is obtained by electrochemically etching the Pt from the disk nanoelectrode. Third, a Au metal nanowire is electrochemically deposited using the Pt nanopore electrode as a template. In the last step, the Au electrode is slightly polished to expose a disk-shape Au nanoelectrode, whose size is determined by the size of the initial Pt nanoelectrode. Steady-state voltammetry in the presence of ferrocene has been used to characterize these Au nanoelectrodes. The Au nanoelectrodes are also characterized using cyclic voltammetry in a H2SO4 solution. The results show characteristic peaks corresponding to the formation of Au surface oxides and their subsequent reduction. The Au nanoelectrodes are modified with 6-(ferrocenyl)hexanethiol molecules, and cyclic voltammetry is used to characterize the ferrocene molecules attached at the Au. As an application, we have constructed Au single-nanoparticle electrodes (SNPEs) using the Au disk nanoelectrodes fabricated by electrochemical deposition. Our initial results of such SNPEs show excellent electrochemical response from single Au nanoparticles.

Single Atom on the 2D Matrix: An Emerging Electrocatalyst for Energy Applications.

The electrochemical energy conversions play an essential role in the production of sustainable and renewable energy. However, the performance is not up to the mark due to the absence of highly efficient and stable electrocatalysts. Recently, both 2D-matrix and single-atom catalysts (SACs) are two intense research topics in the field of electrocatalysis due to the high activity and stability and to maximize the utilization efficiency. Engineering the materials from 3D to 2D and modification from nanoparticles to single atoms have created a significant enhancement in the electrocatalytic activity. Hybridizing both the 2D matrix and SACs (2DM@SACs) creates a new electronic state in the materials, and that bequeaths with enhancing potentials toward the electrocatalytic activity. The strong covalent interaction between the 2D matrix and SACs tunes the intrinsic activity of the electrocatalysts. In this mini-review, we have discussed the different synthesis methods of 2DM@SACs with a focus on their electrochemical energy applications such as hydrogen evolution, oxygen evolution, oxygen reduction, and carbon dioxide reduction. This mini-review appraises the contribution to the rational proposal for the synthesis of perfect 2DM@SAC catalysts with their electrochemical properties toward energy conversion applications.

Gold nanoelectrode ensembles for the simultaneous electrochemical detection of ultratrace arsenic, mercury, and copper.

Simultaneous electrochemical detection of As(III), Hg(II), and Cu(II) using a highly sensitive platform based on gold nanoelectrode ensembles (GNEEs) is described. GNEEs were grown by colloidal chemical approach on thiol-functionalized solgel derived three-dimensional silicate network preassembled on a polycrystalline gold (Au) electrode. GNEEs on the silicate network have been characterized by field emission scanning electron microscopy, X-ray diffraction, diffuse reflectance spectroscopy, and electrochemical measurements. Square wave anodic stripping voltammetry (SWASV) has been used for the detection of As(III) and Hg(II) without any interference from Cu(II) at the potentials of 0.06 and 0.53 V, respectively. The GNEE electrode is highly sensitive, and it shows linear response for As(III) and Hg(II) up to 15 ppb. The detection limit (signal-to-noise ratio = 4) of the GNEE electrode toward As(III) and Hg(II) is 0.02 ppb, which is well below the guideline value given by the World Health Organization (WHO). The potential application of the GNEE electrode for the detection of As(III) in a real sample collected from the arsenic-contaminated water in 24 North Parganas, West Bengal is demonstrated. The GNEE electrode has been successfully used for the simultaneous detection of As(III), Cu(II), and Hg(II) at sub-part-per-billion level without any interference for the first time. The nanostructured electrode shows individual voltammetric peaks for As(III), Cu(II), and Hg(II) at 0.06, 0.35, and 0.53 V, respectively. The analytical performance of the GNEE electrode is superior to the existing electrodes.

Optical sensing of biomedically important polyionic drugs using nano-sized gold particles.

A simple optical method for the sensing of biomedically important polyionic drugs, protamine and heparin based on the reversible aggregation and de-aggregation of gold nanoparticles (AuNPs) is described. The polycationic protamine induces the aggregation of negatively charged citrate-stabilized AuNPs, resulting in a shift in the surface plasmon (SP) band and a consequent color change of the AuNPs from red to blue. Addition of polyanionic heparin dissipates the aggregated AuNPs due to its strong affinity to protamine and the blue color changes to the native color. The color change was monitored using UV-vis spectrophotometry. The aggregation and de-aggregation was confirmed by transmission electron microscopic (TEM) measurements. The degree of aggregation and de-aggregation is proportional to the concentration of added protamine and heparin, allowing their quantitative detection. The change in the absorbance and SP band position has been used to monitor the concentration of protamine and heparin. This optical method can quantify protamine and heparin as low as 0.1 microg/ml and 0.6 microg/ml, respectively and the calibration is linear for a wide range of concentration.

Urea-Assisted Room Temperature Stabilized Metastable ß-NiMoO4: Experimental and Theoretical Insights into its Unique Bifunctional Activity toward Oxygen Evolution and Supercapacitor.

Room-temperature stabilization of metastable ß-NiMoO4 is achieved through urea-assisted hydrothermal synthesis technique. Structural and morphological studies provided significant insights for the metastable phase. Furthermore, detailed electrochemical investigations showcased its activity toward energy storage and conversion, yielding intriguing results. Comparison with the stable polymorph, α-NiMoO4, has also been borne out to support the enhanced electrochemical activities of the as-obtained ß-NiMoO4. A specific capacitance of ∼4188 F g-1 (at a current density of 5 A g-1) has been observed showing its exceptional faradic capacitance. We qualitatively and extensively demonstrate through the analysis of density of states (DOS) obtained from first-principles calculations that, enhanced DOS near top of the valence band and empty 4d orbital of Mo near Fermi level make ß-NiMoO4 better energy storage and conversion material compared to α-NiMoO4. Likewise, from the oxygen evolution reaction experiment, it is found that the state of art current density of 10 mA cm-2 is achieved at overpotential of 300 mV, which is much lower than that of IrO2/C. First-principles calculations also confirm a lower overpotential of 350 mV for ß-NiMoO4.

Highly Active 2D Layered MoS 2 -rGO Hybrids for Energy Conversion and Storage Applications.

The development of efficient materials for the generation and storage of renewable energy is now an urgent task for future energy demand. In this report, molybdenum disulphide hollow sphere (MoS2-HS) and its reduced graphene oxide hybrid (rGO/MoS2-S) have been synthesized and explored for energy generation and storage applications. The surface morphology, crystallinity and elemental composition of the as-synthesized materials have been thoroughly analysed. Inspired by the fascinating morphology of the MoS2-HS and rGO/MoS2-S materials, the electrochemical performance towards hydrogen evolution and supercapacitor has been demonstrated. The rGO/MoS2-S shows enhanced gravimetric capacitance values (318 ± 14 Fg-1) with higher specific energy/power outputs (44.1 ± 2.1 Whkg-1 and 159.16 ± 7.0 Wkg-1) and better cyclic performances (82 ± 0.95% even after 5000 cycles). Further, a prototype of the supercapacitor in a coin cell configuration has been fabricated and demonstrated towards powering a LED. The unique balance of exposed edge site and electrical conductivity of rGO/MoS2-S shows remarkably superior HER performances with lower onset over potential (0.16 ± 0.05 V), lower Tafel slope (75 ± 4 mVdec-1), higher exchange current density (0.072 ± 0.023 mAcm-2) and higher TOF (1.47 ± 0.085 s-1) values. The dual performance of the rGO/MoS2-S substantiates the promising application for hydrogen generation and supercapacitor application of interest.

Au Nanowire-Striped Cu3P Platelet Photoelectrocatalysts.

A stripy pattern of continuous epitaxial growth of thin Au nanowires on plasmonic Cu3P platelets is reported. The obtained Au-Cu3P heterostructures retain their wide area interfacial heterojunction, which is typically not observed in metal-semiconductor heterostructures. This is performed by phosphine-mediated in situ reduction of Au ions on specific facets of Cu3P platelets. The intriguing stripy movements of nanowires are regulated by strong surface binding ligands. Because this is a dual plasmon heterostructure with wide visible absorption window, these are further explored as a photoelectrocatalyst for efficient hole transfer and sensing of an important biomolecule, nicotinamide adenine dinucleotide (NADH). The observed anodic photocurrent was 30 times higher in the presence of NADH, and this proves that the heterostructured material is an ideal photosenser and an efficient catalyst for solar energy conversion.

Good's buffer derived highly emissive carbon quantum dots: excellent biocompatible anticancer drug carrier.

Here, a facile one-step approach has been developed for the synthesis of carbon quantum dots (CQDs) from Good's buffer. The as-synthesized CQDs emit a bright greenish blue coloured fluorescence after exposure to a 365 nm UV-lamp illumination. The bright fluorescence nature of the CQDs has proven them to be excellent probes for cellular imaging. The CQDs are highly biocompatible in nature, which has been validated by an MTT assay test. The in vitro MTT assay demonstrates a more than 95% survival rate when HEK293 (human embryonic kidney) and H357 (human oral squamous carcinoma) cells were treated with CQDs. The low cytotoxicity of Good's buffer derived CQDs opens the door to biomedical applications. The anticancer drug doxorubicin (DOX) was successfully loaded on the CQDs and their delivery efficiency to the target cells via in vitro treatment of cancerous cells was explored. The CQDs supported DOX showed a higher killing rate of the cancer cells compared to bare DOX due to its ease of internalization and efficient pH-triggered release inside the cells.

Efficient electrocatalytic oxidation of NADH at gold nanoparticles self-assembled on three-dimensional sol-gel network.

It is demonstrated that gold (Au) nanoparticles self-assembled on a sol-gel derived three-dimensional silicate network efficiently catalyze the oxidation of NADH in the absence of any electron transfer mediators with a decrease in overpotential of 780 mV in neutral solution.

Simple Growth of Faceted Au-ZnO Hetero-nanostructures on Silicon Substrates (Nanowires and Triangular Nanoflakes): A Shape and Defect Driven Enhanced Photocatalytic Performance under Visible Light.

A simple single-step chemical vapor deposition (CVD) method has been used to grow the faceted Au-ZnO hetero-nanostructures (HNs) either with nanowires (NWs) or with triangular nanoflakes (TNFs) on crystalline silicon wafers with varying oxygen defect density in ZnO nanostructures. This work reports on the use of these nanostructures on substrates for photodegradation of rhodamine B (RhB) dyes and phenol under the visible light illumination. The photoluminescence measurements showed a substantial enhancement in the ratio of defect emission to band-edge emission for TNF (ratio ≈ 7) compared to NW structures (ratio ≤ 0.4), attributed to the presence of more oxygen defects in TNF sample. The TNF structures showed 1 order of magnitude enhancement in photocurrent density and an order of magnitude less charge-transfer resistance (R(ct)) compared to NWs resulting high-performance photocatalytic activity. The TNFs show enhanced photocatalytic performance compared to NWs. The observed rate constant for RhB degradation with TNF samples is 0.0305 min(-1), which is ≈5.3 times higher compared to NWs case with 0.0058 min(-1). A comparison has been made with bulk ZnO powders and ZnO nanostructures without Au to deduce the effect of plasmonic nanoparticles (Au) and the shape of ZnO in photocatalytic performance. The results reveal the enhanced photocatalytic capability for the triangular nanoflakes of ZnO toward RhB degradation with good reusability that can be attracted for practical applications.

A facile approach for in situ synthesis of graphene-branched-Pt hybrid nanostructures with excellent electrochemical performance.

A facile and green approach for the synthesis of highly electroactive branched Pt nanostructures well dispersed on graphene has been developed by in situ reduction of graphene oxides and Pt(iv) ions in an aqueous medium. The as-synthesized branched Pt and graphene hybrid nanomaterials (GR-BPtNs) were thoroughly characterized using Transmission Electron Microscope (TEM), UV-Visible spectroscopy, Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and Raman spectroscopy. This report clearly exploits the decisive role of the graphene support, the pH of the solution and the stabiliser on shaping the branched morphology of the Pt nanostructures well dispersed on graphene. Cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy (EIS) measurements were employed to investigate the electrocatalytic performance and durability of GR-BPtNs towards methanol oxidation and oxygen reduction. The results reveal that the synergetic effect of the graphene support and the branched morphology triggers electrocatalytic performance and robust tolerance to surface poisoning of GR-BPtNs.

Enzyme integrated silicate-Pt nanoparticle architecture: a versatile biosensing platform.

A novel 3-D nanoarchitectured platform based on Pt nanoparticles (nPts) is developed for the sensing of sub-nanomolar levels of hydrogen peroxide and for the fabrication of amperometric biosensor for uric acid, cholesterol and glucose. The nPts have been immobilized on the thiol functional group containing sol-gel silicate 3-D network derived from 3-mercaptopropyltrimethoxysilane (MPTS). The nanoparticles on the 3-D architecture have size distribution between 7 and 10nm. The nPts on the platform efficiently catalyze the oxidation of H(2)O(2) at the potential of +0.45 V in the absence of enzymes and redox mediators. This nanoarchitectured platform is highly sensitive and can detect H(2)O(2) at sub-nanomolar levels (0.1 nM) in neutral solution. The nanoarchitectured platform does not suffer from interference due to other common easily oxidizable interfering agents. Excellent reproducibility, long-term storage and operational stability are observed. This platform is used to determine H(2)O(2) concentration in rainwater and for the fabrication of biosensors. Amperometric oxidase-based biosensing platforms are developed by integrating the enzymes and nPts with the silicate network for the sensing of uric acid cholesterol and glucose. The enzyme encapsulated 3-D architecture retains the enzymatic activity and efficiently detects enzymatically generated H(2)O(2) without any interference. These biosensors are stable and show excellent sensitivity and fast response time. A linear response was obtained for a wide concentration range of all analytes. The practical utilization of the biosensor for the measurement of uric acid, cholesterol and glucose in serum sample is demonstrated. The biological sample analysis was validated with clinical laboratory measurements.

A facile approach for morphosynthesis of Pd nanoelectrocatalysts.

A facile approach has been developed for synthesis of highly-structured, anisotropic Pd nanostructures. The dendritic Pd nanostructures show superior performance toward oxidation of formic acid and methanol for fuel cell application.