Poly(ethylene oxide) grafted silica nanoparticles: efficient routes of synthesis with associated colloidal stability.

In this study, poly(ethylene oxide) monomethyl ether (MPEO) of molecular weight of 5000, 10 000, and 20 000 g mol-1 were grafted onto colloidal silica nanoparticles (NPs) of a 27.6 nm diameter using two distinct "grafting to" processes. The first method was based on the coupling reaction of epoxide-end capped MPEO with amine-functionalized silica NPs, while the second method was based on the condensation of triethoxysilane-terminated MPEO onto the unmodified silica NPs. The influence of PEO molecular weight, grafting process and grafting conditions (temperature, reactant concentration, reaction time) on the PEO grafting density was fully investigated. Thermogravimetric analysis (TGA) was used to determine the grafting density which ranged from 0.12 chains per nm2 using the first approach to 1.02 chains per nm2 when using the second approach. 29Si CP/MAS NMR characterization indirectly revealed that above a grafting density value of 0.3 PEO chains per nm2, a dendri-graft PEO network was built around the silica surface which was composed of PEO chains directly anchored to the silica surface and those grafted to silica NPs by intermediate of >CH-O-Si- bonds. The colloidal stability of the particles during different steps of the grafting process was characterized by small-angle X-ray scattering (SAXS). We have found that the colloidal systems are stable whatever the achieved grafting density due to the strong repulsions between the NPs, with the strength of repulsion increasing with the molecular weight of the grafted MPEO chains.

The desalting/salting pathway: a route to form metastable aggregates with tuneable morphologies and lifetimes.

We investigate the formation/re-dissociation mechanisms of hybrid complexes made from negatively charged PAA2k coated γ-Fe2O3 nanoparticles (NP) and positively charged polycations (PDADMAC) in aqueous solution in the regime of very high ionic strength (I). When the building blocks are mixed at large ionic strength (1 M NH4Cl), the electrostatic interaction is screened and complexation does not occur. If the ionic strength is then lowered down to a targeted ionic strength Itarget, there is a critical threshold Ic = 0.62 M at which complexation occurs, that is independent of the charge ratio Z and the pathway used to reduce salinity (drop-by-drop mixing or fast mixing). If salt is added back up to 1 M, the transition is not reversible and persistent out-of-equilibrium aggregates are formed. The lifetimes of such aggregates depends on Itarget: the closer Itarget to Ic is, the more difficult it is to dissolve the aggregates. Such peculiar behavior is driven by the inner structure of the complexes that are formed after desalting. When Itarget is far below Ic, strong electrostatic interactions induce the formation of dense, compact and frozen aggregates. Such aggregates can only poorly reorganize further on with time, which makes their dissolution upon resalting almost reversible. Conversely, when Itarget is close to Ic more open aggregates are formed due to weaker electrostatic interactions upon desalting. The system can thus rearrange with time to lower its free energy and reach more stable out-of-equilibrium states which are very difficult to dissociate back upon resalting, even at very high ionic strength.

Photolabile Well-Defined Polystyrene Grafted on Silica Nanoparticle via Nitroxide-Mediated Polymerization (NMP).

Herein, the synthesis of a novel nitroxide-mediated polymerization (NMP) initiator bearing a photolabile ortho-nitrobenzyl (oNB) group allowing surface-initiated NMP preparation of well-defined photoresponsive polystyrene grafted on silica nanoparticles is described. The photocleavable and photoresponsive properties of the prepared materials are demonstrated using small angle X-ray scattering (SAXS) characterization.

Insight into Kinetics and Mechanisms of AOT Vesicle Adsorption on Silica in Unfavorable Conditions.

The structure of adsorbed surfactant layers at the equilibrium state has already been investigated using various experimental techniques. However, the comprehension of the formation of structural intermediates in nonequilibrium states and the resulting adsorption kinetics still remain a challenging task. The temporal characterization of these intermediate structures provides further understanding of the layer structure at equilibrium and of the main interactions involved in the adsorption process. In this article, we studied the adsorption kinetics of AOT vesicles on silica at different pHs at ambient temperature. The AOT vesicles were formed in a brine solution. Quartz crystal microbalance with dissipation monitoring (QCM-D) was used to obtain information on the kinetics of surfactant adsorption and on the structure of the adsorbed layer at the equilibrium state. Additionally, neutron reflectivity experiments were performed to provide a detailed description of the mean surfactant concentration profile normal to the surface at equilibrium. Results suggest that vesicles in the bulk influence the adsorption mechanisms. In acidic conditions, after a time-dependent structural rearrangement step, followed by the rupture of initially adsorbed vesicles, the formation of a bilayer was observed. At an intermediate and basic pH, in spite of the electrostatic repulsion between the negatively charged surfactants and silica, results demonstrated the existence of an adsorbed layer composed of AOT vesicles. Vesicles are more or less closely packed depending on the pH of the solution. Results show a non-negligible influence of NaCl addition at pH values where adsorption is initially inhibited. Vesicle adsorption at the intermediate and basic pH is probably due to the combination of attractive van der Waals interactions promoted in high ionic strength systems and the formation of hydrogen bonds. Interpretation of adsorption kinetics gave insight into adsorption mechanisms in an electrostatic repulsion environment.

Adhesive Sponge Based on Supramolecular Dimer Interactions as Scaffolds for Neural Stem Cells.

Improving cell-material interactions of nonadhesive scaffolds is crucial for the success of biomaterials in tissue engineering. Due to their high surface area and open pore structure, sponges are widely reported as absorbent materials for biomedical engineering. The biocompatibility and biodegradability of polysaccharide sponges, coupled with the chemical functionalities of supramolecular dimers, make them promising combinations for the development of adhesive scaffolds. Here, a supramolecular tactic based on (UPy)-modified polysaccharide associated with three-dimensional structure of sponges was developed to reach enhanced cellular adhesion. For this purpose, three approaches were examined individually in order to accomplish this goal. In the first approach, the backbone polysaccharides with noncell adhesive properties were modified via a modular tactic using UPy-dimers. Hereupon, the physical-chemical characterizations of the supramolecular sponges were performed, showing that the presence of supramolecular dimers improved their mechanical properties and induced different architectures. In addition, small-angle neutron scattering (SANS) measurements and rheology experiments revealed that the UPy-dimers into agarose backbone are able to reorganize in thinning aggregates. It is also demonstrated that the resulted UPy-agarose (AGA-UPy) motifs in surfaces can promote cell adhesion. Finally, the last approach showed the great potential for use of this novel material in bioadhesive scaffolds indicating that neural stem cells show a spreading bias in soft materials and that cell adhesion was enhanced for all UPy-modified sponges compared to the reference, i.e. unmodified sponges. Therefore, by functionalizing sponge surfaces with UPy-dimers, an adhesive supramolecular scaffold is built which opens the opportunity its use neural tissues regeneration.

Accelerated Local Dynamics in Matrix-Free Polymer Grafted Nanoparticles.

The tracer diffusion coefficient of six different permanent gases in polymer-grafted nanoparticle (GNP) membranes, i.e., neat GNP constructs with no solvent, show a maximum as a function of the grafted chain length at fixed grafting density. This trend is reproduced for two different NP sizes and three different polymer chemistries. We postulate that nonmonotonic changes in local, segmental friction as a function of graft chain length (at fixed grafting density) must underpin these effects, and use quasielastic neutron scattering to probe the self-motions of polymer chains at the relevant segmental scale (i.e., sampling local friction or viscosity). These data, when interpreted with a jump diffusion model, show that, in addition to the speeding-up in local chain dynamics, the elementary distance over which segments hop is strongly dependent on graft chain length. We therefore conclude that transport modifications in these GNP layers, which are underpinned by a structural transition from a concentrated brush to semidilute polymer brush, are a consequence of both spatial and temporal changes, both of which are likely driven by the lower polymer densities of the GNPs relative to the neat polymer.

pH-Induced reorientation of cytochrome c on silica nanoparticles.

The orientation of cytochrome c molecules at the surface of silica nanoparticles was studied in a wide pH range by combining small-angle neutron scattering, adsorption measurements, and molecular dynamics simulations. The results indicate a reorientation of the ellipsoidal protein from head-on to side-on as the pH is increased. This is attributed to changes in the surface charge distribution of both the protein and the nanoparticles.

A Competing Hydrogen Bonding Pattern to Yield a Thermo-Thickening Supramolecular Polymer.

Introduction of competing interactions in the design of a supramolecular polymer (SP) creates pathway complexity. Ester-bis-ureas contain both a strong bis-urea sticker that is responsible for the build-up of long rod-like objects by hydrogen bonding and ester groups that can interfere with this main pattern in a subtle way. Spectroscopic (FTIR and CD), calorimetric (DSC), and scattering (SANS) techniques show that such ester-bis-ureas self-assemble into three competing rod-like SPs. The previously unreported low-temperature SP is stabilized by hydrogen bonds between the interfering ester groups and the urea moieties. It also features a weak macroscopic alignment of the rods. The other structures form isotropic dispersions of rods stabilized by the more classical urea-urea hydrogen bonding pattern. The transition from the low-temperature structure to the next occurs reversibly by heating and is accompanied by an increase in viscosity, a rare feature for solutions in hydrocarbons.

Two-Component Self-Assemblies: Investigation of a Synergy between Bisurea Stickers.

It is of interest to develop two-component systems for added flexibility in the design of supramolecular polymers, nanofibers, or organogels. Bisureas are known to self-assemble by hydrogen bonding into long supramolecular objects. We show here that mixing aromatic bisureas with slightly different structures can yield surprisingly large synergistic effects. A strong increase in viscosity is observed when a bisurea with the sterically demanding 2,4,6-trimethylbenzene spacer is combined with a bisurea bearing no methyl group in position 2 of the aromatic spacer (i.e., 4-methylbenzene or 4,6-dimethylbenzene). This effect is the consequence of a change in the supramolecular assembly triggered by the composition of the mixture. The mixture of complementary bisureas forms rodlike objects that are more stable by about 1 kJ/mol and that are thicker than the rodlike objects formed by both parent systems.

Interplay between polymer chain conformation and nanoparticle assembly in model industrial silica/rubber nanocomposites.

The question of the influence of nanoparticles (NPs) on chain dimensions in polymer nanocomposites (PNCs) has been treated mainly through the fundamental way using theoretical or simulation tools and experiments on well-defined model PNCs. Here we present the first experimental study on the influence of NPs on the polymer chain conformation for PNCs designed to be as close as possible to industrial systems employed in the tire industry. PNCs are silica nanoparticles dispersed in a styrene-butadiene-rubber (SBR) matrix whose NP dispersion can be managed by NP loading with interfacial coatings or coupling additives usually employed in the manufacturing mixing process. We associated specific chain (d) labeling, and the so-called zero average contrast (ZAC) method, with SANS, in situ SANS and SAXS/TEM experiments to extract the polymer chain scattering signal at rest for non-cross linked and under stretching for cross-linked PNCs. NP loading, individual clusters or connected networks, as well as the influence of the type, the quantity of interfacial agent and the influence of the elongation rate have been evaluated on the chain conformation and on its related deformation. We clearly distinguish the situations where the silica is perfectly matched from those with unperfected matching by direct comparison of SANS and SAXS structure factors. Whatever the silica matching situation, the additive type and quantity and the filler content, there is no significant change in the polymer dimension for NP loading up to 15% v/v within a range of 5%. One can see an extra scattering contribution at low Q, as often encountered, enhanced for non-perfect silica matching but also visible for perfect filler matching. This contribution can be qualitatively attributed to specific h or d chain adsorption on the NP surface inside the NP cluster that modifies the average scattering neutron contrast of the silica cluster. Under elongation, NPs act as additional cross-linking junctions preventing chain relaxation and giving a deformation of the chain with the NP closer to a theoretical phantom network prediction than a pure matrix.

Role of block copolymer adsorption versus bimodal grafting on nanoparticle self-assembly in polymer nanocomposites.

We compare the self-assembly of silica nanoparticles (NPs) with physically adsorbed polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP) copolymers (BCP) against NPs with grafted bimodal (BM) brushes comprised of long, sparsely grafted PS chains and a short dense carpet of P2VP chains. As with grafted NPs, the dispersion state of the BCP NPs can be facilely tuned in PS matrices by varying the PS coverage on the NP surface or by changes in the ratio of the PS graft to matrix chain lengths. Surprisingly, the BCP NPs are remarkably better dispersed than the NPs tethered with bimodal brushes at comparable PS grafting densities. We postulate that this difference arises because of two factors inherent in the synthesis of the NPs: In the case of the BCP NPs the adsorption process is analogous to the chains being "grafted to" the NP surface, while the BM case corresponds to "grafting from" the surface. We have shown that the "grafted from" protocol yields patchy NPs even if the graft points are uniformly placed on each particle. This phenomenon, which is caused by chain conformation fluctuations, is exacerbated by the distribution function associated with the (small) number of grafts per particle. In contrast, in the case of BCP adsorption, each NP is more uniformly coated by a P2VP monolayer driven by the strongly favorable P2VP-silica interactions. Since each P2VP block is connected to a PS chain we conjecture that these adsorbed systems are closer to the limit of spatially uniform sparse brush coverage than the chemically grafted case. We finally show that the better NP dispersion resulting from BCP adsorption leads to larger mechanical reinforcement than those achieved with BM particles. These results emphasize that physical adsorption of BCPs is a simple, effective and practically promising strategy to direct NP dispersion in a chemically unfavorable polymer matrix.

Molten fatty acid based microemulsions.

We show that ternary mixtures of water (polar phase), myristic acid (MA, apolar phase) and cetyltrimethylammonium bromide (CTAB, cationic surfactant) studied above the melting point of myristic acid allow the preparation of microemulsions without adding a salt or a co-surfactant. The combination of SANS, SAXS/WAXS, DSC, and phase diagram determination allows a complete characterization of the structures and interactions between components in the molten fatty acid based microemulsions. For the different structures characterized (microemulsion, lamellar or hexagonal phases), a similar thermal behaviour is observed for all ternary MA/CTAB/water monophasic samples and for binary MA/CTAB mixtures without water: crystalline myristic acid melts at 52 °C, and a thermal transition at 70 °C is assigned to the breaking of hydrogen bounds inside the mixed myristic acid/CTAB complex (being the surfactant film in the ternary system). Water determines the film curvature, hence the structures observed at high temperature, but does not influence the thermal behaviour of the ternary system. Myristic acid is partitioned in two "species" that behave independently: pure myristic acid and myristic acid associated with CTAB to form an equimolar complex that plays the role of the surfactant film. We therefore show that myristic acid plays the role of a solvent (oil) and a co-surfactant allowing the fine tuning of the structure of oil and water mixtures. This solvosurfactant behaviour of long chain fatty acid opens the way for new formulations with a complex structure without the addition of any extra compound.

Control of the Pore Texture in Nanoporous Silicon via Chemical Dissolution.

The surface and textural properties of porous silicon (pSi) control many of its physical properties essential to its performance in key applications such as optoelectronics, energy storage, luminescence, sensing, and drug delivery. Here, we combine experimental and theoretical tools to demonstrate that the surface roughness at the nanometer scale of pSi can be tuned in a controlled fashion using partial thermal oxidation followed by removal of the resulting silicon oxide layer with hydrofluoric acid (HF) solution. Such a process is shown to smooth the pSi surface by means of nitrogen adsorption, electron microscopy, and small-angle X-ray and neutron scattering. Statistical mechanics Monte Carlo simulations, which are consistent with the experimental data, support the interpretation that the pore surface is initially rough and that the oxidation/oxide removal procedure diminishes the surface roughness while increasing the pore diameter. As a specific example considered in this work, the initial roughness ξ ∼ 3.2 nm of pSi pores having a diameter of 7.6 nm can be decreased to 1.0 nm following the simple procedure above. This study allows envisioning the design of pSi samples with optimal surface properties toward a specific process.

Quenched microemulsions: a new route to proton conductors.

Solid-state proton conductors operating under mild temperature conditions (T < 150 °C) would promote the use of electrochemical devices as fuel cells. Alternatives to the water-sensitive membranes made of perfluorinated sulfonated polymers require the use of protogenic moieties bearing phosphates/phosphonates or imidazole groups. Here, we formulate microemulsions using water, a cationic surfactant (cetyltrimethyl ammonium bromide, CTAB) and a fatty acid (myristic acid, MA). The fatty acid acts both as an oil phase above its melting point (52 °C) and as a protogenic moiety. We demonstrate that the mixed MA-CTA film presents significant proton conductivity. Furthermore, bicontinuous microemulsions are found in the water-CTAB-MA phase diagram above 52 °C, where molten MA plays both the role of the oil phase and the co-surfactant. This indicates that the hydrogen-bond rich MA-CTA film can be formulated in the molten phase. The microemulsion converts into a lamellar phase upon solidification at room temperature. Our results demonstrate the potential of such self-assembled materials for the design of bulk proton conductors, but also highlight the necessity to control the evolution of the nanostructure upon solidification of the oil phase.

Unexpected thermo-responsiveness of bisurea-functionalized hydrophilic polymers in water.

HYPOTHESIS: Thermoresponsive polymers are important materials for various applications. However, the number of polymers that exhibit this property in the temperature range of interest remains limited. The development of novel rational design strategies through the understanding of the thermal transition's origin is therefore of utmost importance. EXPERIMENTS: Bisurea-functionalized water-soluble polymers were synthesized by RAFT polymerization. After direct dissolution in water, the supramolecular assemblies were analyzed by cryo-TEM and SANS. Their temperature-dependent water-solubility was characterized by various techniques, namely DLS, SANS, DSC, IR, to understand the origin of the temperature sensitivity. FINDINGS: The supramolecular assemblies exhibit an unexpected temperature-dependent solubility. For instance, a cloud point of only 39 °C was measured for poly(N,N-dimethylacrylamide) assemblies. This property is not restricted to one specific polymer but is rather a general feature of bisurea-functionalized polymers that form supramacromolecular bottlebrushes in water. The results highlight the existence of two distinct transitions; the first one is a visually perceptible cloud point due to the aggregation of individual micelles, presumably driven by the hydrophobic effect. The second transition is related to the dissociation of intermolecular bisurea hydrogen bonds. Finally, we show that it is possible to widely tune the cloud point temperature through the formation of co-assemblies.

Impact of the protein composition on the structure and viscoelasticity of polymer-like gluten gels.

We investigate the structure of gluten polymer-like gels in a binary mixture of water/ethanol, 50/50 v/v, a good solvent for gluten proteins. Gluten comprises two main families of proteins, monomeric gliadins and polymer glutenins. In the semi-dilute regime, scattering experiments highlight two classes of behavior, akin to standard polymer solution and polymer gel, depending on the protein composition. We demonstrate that these two classes are encoded in the structural features of the proteins in very dilute solution, and are correlated with the presence of proteins assemblies of typical size tens of nanometers. The assemblies only exist when the protein mixture is sufficiently enriched in glutenins. They are found directly associated to the presence in the gel of domains enriched in non-exchangeable H-bonds and of size comparable to that of the protein assemblies. The domains are probed in neutron scattering experiments thanks to their unique contrast. We show that the sample visco-elasticity is also directly correlated to the quantity of domains enriched in H-bonds, showing the key role of H-bonds in ruling the visco-elasticity of polymer gluten gels.

How crucial is the impact of calcium on the reactivity of iron-organic matter aggregates? Insights from arsenic.

Environmental iron-organic matter (Fe-OM) aggregates play a major role in the dynamic of pollutants. Nowadays, there is a lack of information about the control exerted by their structural organization on their reactivity towards metal(loid)s and in particular, the impact of major ions, such as calcium. The sorption capacity of mimetic environmental Fe-OM-Ca aggregates was investigated relative to the Fe/organic carbon (OC) and Ca/Fe ratios using As as a probe. It was shown that Fe speciation is the key factor controlling the reactivity of Fe-OM-Ca aggregates regarding the high affinity of Fe(III)-oligomers towards As and the high sorption capacity of ferrihydrite-like nanoparticles. Moreover, when it occurs at high concentration, Ca competes with Fe for OM binding leading to an increase in the amount of ferrihydrite-like nanoparticles and binding site availability. As a consequence, Ca not only impacts the ionic strength but it also has a dramatic impact on the structural organization of Fe-OM aggregates at several scales of organization, resulting in an increase of their sorption capacity. In the presence of high amounts of Ca, Fe-OM-Ca aggregates could immobilize pollutants in the soil porous media as they form a micrometric network exhibiting a strong sorption capacity.