Synthesis of proposed structure of ledebourin A.

Naturally occurring homoisoflavonoids have attracted significant attention in the field of medicinal chemistry due to their potential health benefits and diverse range of biological properties. Recently, C-prenylated homoisoflavonoids, namely ledebourin A, B, and C, were isolated from the bulbs of Ledebouria floribunda and have exhibited potent antioxidant activity. In this study, we successfully synthesized ledebourin A and its regioisomer, compounds 1 and 9. By comparing the NMR spectra of the synthesized compounds with those of reported ledebourin A, we observed discrepancies. Nonetheless, our synthesis and subsequent findings offer valuable insights into the structural revision and biological activities of these unique prenylated homoisoflavonoids. Both synthesized compounds 1 and 9 exhibited no toxicity towards Hep-G2 cells and displayed the ability to recover glyceraldehyde-induced cell death, suggesting their potential as protective agents against liver damage.

Biodiesel production potential of microalgae, cultivated in acid mine drainage and livestock wastewater.

The adaptability and biofuel production potential of two strains of microalgae isolated and cultivated in livestock wastewater effluent (LWE) with acid mine drainage (AMD) were investigated. The isolated strains of microalgae from samples obtained from LWE and AMD, two microalgal strains (Nephroselmis sp. KGE2 and Autodesmus obliquus KGE17) were selected based on their growth rate and lipid productivity. The dry cell weight of Nephroselmis sp. KGE2 and Autodesmus obliquus KGE17 after 20 days of cultivation in AMD increased from 0.05 to 0.59 g/L and from 0.05 to 0.55 g/L, respectively. These findings revealed a significant accumulation of fatty acids with increasing AMD content. Nephroselmis sp. KGE2 in LWE with 5% AMD demonstrated a higher growth rate (0.59 ± 0.03 g/L) and fatty acid production (401.5 ± 47.3 mg/L) than Autodesmus obliquus KGE17 with 5% AMD. Additionally, Nephroselmis sp. KGE2 had C16-C18 fatty acid content (92.4%) in LWE with AMD. Biodiesel produced from Nephroselmis sp. KGE2 had a higher cetane number (52.31) and iodine value (88.26 g I2/100 g oil). Consequently, Nephroselmis sp. KGE2 can be considered a potential candidate for biodiesel production using AMD as an iron source.

Mixotrophic cultivation of a microalga Scenedesmus obliquus in municipal wastewater supplemented with food wastewater and flue gas CO2 for biomass production.

The biomass and lipid/carbohydrate production by a green microalga Scenedesmus obliquus under mixotrophic condition using food wastewater and flue gas CO2 with municipal wastewater was investigated. Different dilution ratios (0.5-2%) of municipal wastewater with food wastewater were evaluated in the presence of 5, 10 and 14.1% CO2. The food wastewater (0.5-1%) with 10-14.1% CO2 supported the highest growth (0.42-0.44 g L(-1)), nutrient removal (21-22 mg TN L(-1)), lipid productivity (10-11 mg L(-1)day(-1)) and carbohydrate productivity (13-16 mg L(-1)day(-1)) by S. obliquus after 6 days of cultivation. Food wastewater increased the palmitic and oleic acid contents up to 8 and 6%, respectively. Thus, application of food wastewater and flue gas CO2 can be employed for enhancement of growth, lipid/carbohydrate productivity and wastewater treatment efficiency of S. obliquus under mixotrophic condition, which can lead to development of a cost effective strategy for microalgal biomass production.

Simultaneous nutrient removal and lipid production from pretreated piggery wastewater by Chlorella vulgaris YSW-04.

The feasibility of using a microalga Chlorella vulgaris YSW-04 was investigated for removal of nutrients from piggery wastewater effluent. The consequent lipid production by the microalga was also identified and quantitatively determined. The wastewater effluent was diluted to different concentrations ranging from 20 to 80 % of the original using either synthetic media or distilled water. The dilution effect on both lipid production and nutrient removal was evaluated, and growth rate of C. vulgaris was also monitored. Dilution of the wastewater effluent improved microalgal growth, lipid productivity, and nutrient removal. The growth rate of C. vulgaris was increased with decreased concentration of piggery wastewater in the culture media regardless of the diluent type. Lipid production was relatively higher when using synthetic media than using distilled water for dilution of wastewater. The composition of fatty acids accumulated in microalgal biomass was dependent upon both dilution ratio and diluent type. The microalga grown on a 20 % concentration of wastewater effluent diluted with distilled water was more promising for generating high-efficient biodiesel compared to the other culture conditions. The highest removal of inorganic nutrients was also achieved at the same dilution condition. Our results revealed the optimal pretreatment condition for the biodegradation of piggery wastewater with microalgae for subsequent production of high-efficient biodiesel.

Biomass, lipid content, and fatty acid composition of freshwater Chlamydomonas mexicana and Scenedesmus obliquus grown under salt stress.

Two freshwater microalgae including Chlamydomonas mexicana and Scenedesmus obliquus were grown on Bold Basal Medium (BBM) with different levels of salinity up to 100 mM NaCl. The dry biomass and lipid content of microalgae were improved as the concentration of NaCl increased from 0 to 25 mM. Highest dry weight (0.8 and 0.65 g/L) and lipid content (37 and 34 %) of C. mexicana and S. obliquus, respectively, were obtained in BBM amended with 25 mM NaCl. The fatty acid composition of the investigated species was also improved by the increased NaCl concentration. At 50 mM, NaCl palmitic acid (35 %) and linoleic acid (41 %) were the dominant fatty acids in C. mexicana, while oleic acid (41 %) and α-linolenic acid (20 %) were the major fractions found in S. obliquus.

Microalgal species growing on piggery wastewater as a valuable candidate for nutrient removal and biodiesel production.

Six microalgal species were examined in this study to determine their effectiveness in the coupling of piggery wastewater treatment and biodiesel production. The dry biomasses of Ourococcus multisporus, Nitzschia cf. pusilla, Chlamydomonas mexicana, Scenedesmus obliquus, Chlorella vulgaris, and Micractinium reisseri were 0.34 ± 0.08, 0.37 ± 0.13, 0.56 ± 0.35, 0.53 ± 0.30, 0.49 ± 0.26, and 0.35 ± 0.08 g dwt/L, respectively. The highest removal of nitrogen (62%), phosphorus (28%), and inorganic carbon (29%) were achieved by C. mexicana. In the absence of microalgae, the spontaneous precipitation of phosphorus, calcium, and inorganic carbon occurred at slightly alkaline pH. The highest lipid productivity and lipid content (0.31 ± 0.03 g/L and 33 ± 3%, respectively) were found in C. mexicana. The fatty acid compositions of the studied species were mainly palmitic, linoleic, α-linolenic, and oleic. The results of our study suggest that C. mexicana is one of the most promising candidates for simultaneous nutrient removal and high-efficient biodiesel production.

Nitrate and ammonium ions removal from groundwater by a hybrid system of zero-valent iron combined with adsorbents.

Nitrate (NO(3)(-)) is a commonly found contaminant in groundwater and surface water. It has created a major water quality problem worldwide. The laboratory batch experiments were conducted to investigate the feasibility of HCl-treated zero-valent iron (Fe(0)) combined with different adsorbents as hybrid systems for simultaneous removal of nitrate (NO(3)(-)) and ammonium (NH(4)(+)) ions from aqueous solution. The maximum NO(3)(-) removal in combined Fe(0)-granular activated carbon (GAC), Fe(0)-filtralite and Fe(0)-sepiolite systems was 86, 96 and 99%, respectively, at 45 °C for 24 h reaction time. The NO(3)(-) removal rate increased with the increase in initial NO(3)(-) concentration. The NO(3)(-) removal efficiency by hybrid systems was in the order of sepiolite > filtralite > GAC. The NH(4)(+) produced during the denitrification process by Fe(0) was successfully removed by the adsorbents, with the removal efficiency in the order of GAC > sepiolite > filtralite. Results of the present study suggest that the use of a hybrid system could be a promising technology for achieving simultaneous removal of NO(3)(-) and NH(4)(+) ions from aqueous solution.

Removal of nitrate and ammonium ions from livestock wastewater by hybrid systems composed of zero-valent iron and adsorbents.

The feasibility of hybrid systems for simultaneous removal of nitrate (NO3-) and ammonium ions (NH4+) from livestock wastewater was examined in batch experiments. As a part of efforts to remove nitrate and ammonium simultaneously, Fe0 and adsorbents including coconut-based granular activated carbon (GAC), sepiolite and filtralite were used. Various parameters such as adsorbent dosages and temperature were studied. Removal of NO3- increased with increase in temperature. Maximum NO3- removal (85.3%) was observed for the Fe0-filtralite hybrid system at 45 degrees C for a 24 h reaction time. Increase in GAC and sepiolite dosages had significant (P < 0.01) effect on the NH4+ removal efficiency, which was primarily due to the net negative surface charge of the adsorbents. The efficiency of hybrid systems for the removal of NO3- was in the order of filtralite > sepiolite > GAC, and the order of the removal of NH4+ was GAC > sepiolite > filtralite. The results of the present study suggest that the use of hybrid systems could be a promising innovative technology for achieving simultaneous removal of NO3- and NH4 from livestock wastewater.

High-throughput integrated pretreatment strategies to convert high-solid loading microalgae into high-concentration biofuels.

The commercial feasibility of energy-efficient conversion of highly concentrated microalgal suspensions to produce high-titer biofuels is a major bottleneck due to high energy consumption. Herein, high-titer biofuels (bioethanol, higher-alcohols, and biodiesel) were generated from carbohydrate-rich Chlamydomonas mexicana and lipid-rich Chlamydomonas pitschmannii biomass through energy-saving microwave pretreatment, successive fermentation, and transesterification. Microwave pretreatment needed low specific energy (4.2 MJ/kg) for 100 g/L of microalgal suspension. Proposed sustainable integrated pretreatments method achieved unprecedented total conversion efficiency (67%) and highest biomass utilization (87%) of C. pitschmannii (100 g/L) with high yields of bioethanol (0.48 g-ethanol/g-carbohydrates), higher-alcohols (0.44 g-higher-alcohols/g-proteins), and biodiesel (0.90 g-biodiesel/g-lipids). Transmission electron microscopy showed the changes in the microalgal cellular integrity before and after sequential fermentations. Energy-efficient integrated pretreatments enhanced the extraction efficiency and whole utilization of high-concentration microalgae to generate high-titer biofuels with minimum waste production.

Metabolic pathways for microalgal biohydrogen production: Current progress and future prospectives.

Microalgal biohydrogen (bioH2) has attracted global interest owing to its potential carbon-free source of sustainable renewable energy. Most of previous reviews which focused on microalgal bioH2, have shown unclear differentiation among the metabolic pathways. In this review, investigation of all different metabolic pathways for microalgal bioH2 production along with discussion on the recent research work of last 5-years have been considered. The major factors (such as light, vital nutrients, microalgal cell density, and substrate bioavailability) are highlighted. Moreover, effect of various pretreatment approaches on the constituent's bioaccessibility is reported. Microbial electrolysis cells as a new strategy for bioH2 production is stated. Comparison between the operation conditions of various bioreactors and economic feasibility is also emphasized. Genetic, metabolic engineering, and synthetic biology as recent technologies improved the microalgal bioH2 production through inactivation of uptake hydrogenase (H2ase), inhibition of the competing pathways in polysaccharide synthesis, and improving the O2 tolerant H2ase.

Heavy metal speciation with prediction model for heavy metal mobility and risk assessment in mine-affected soils.

Heavy metals from mines affect the soil and groundwater, and cause and severely impact on the health of local residents. The soil samples were characterized for the distribution and by the chemical speciation method, and then estimated the human health risks of the two mineaffected soils after stabilization process.. Two extraction techniques (Tessier and Wenzel methods) were applied to fractionate metals, such as arsenic (As) and zinc (Zn), to quantify the chemical status of metals in the soils. The mobility of As and Zn was predicted using the ASTM test and sequential extraction (Tessier and Wenzel) method results. The correlation coefficients of As and Zn mobility prediction using Tessier and Wenzel Fraction 1 were 0.920 and 0.815, respectively. The sum of fractions F1 + F2 + F3 showed the highest correlation coefficients value and F value for mobility prediction of both As and Zn. The hazardous indices (HI) for non-carcinogenic risk and carcinogenic risk (CR) to humans were evaluated according to the pseudo-total concentrations of metal in soils. The CR values of carcinogenic for As were within the ranges from 1.38 × 10-4 to 1.25 × 10-3 and 3.71 × 10-4 to 3.35 × 10-3 for both Young Dong (YD) and Dea San (DS), respectively. The HI for non-carcinogenic risk was the highest for As in the YD (2.77) and DS (7.46) soils, which covered approximately 96 and 84% of HI, respectively. In summary, the contribution of As to risk from heavy metals was dominant.

Defluoridation from aqueous solutions by granular ferric hydroxide (GFH).

This research was undertaken to evaluate the feasibility of granular ferric hydroxide (GFH) for fluoride removal from aqueous solutions. Batch experiments were performed to study the influence of various experimental parameters such as contact time (1 min-24h), initial fluoride concentration (1-100 mgL(-1)), temperature (10 and 25 degrees C), pH (3-12) and the presence of competing anions on the adsorption of fluoride on GFH. Kinetic data revealed that the uptake rate of fluoride was rapid in the beginning and 95% adsorption was completed within 10 min and equilibrium was achieved within 60 min. The sorption process was well explained with pseudo-first-order and pore diffusion models. The maximum adsorption capacity of GFH for fluoride removal was 7.0 mgg(-1). The adsorption was found to be an endothermic process and data conform to Langmuir model. The optimum fluoride removal was observed between pH ranges of 4-8. The fluoride adsorption was decreased in the presence of phosphate followed by carbonate and sulphate. Results from this study demonstrated potential utility of GFH that could be developed into a viable technology for fluoride removal from drinking water.

Effect of flue gas CO2 on the growth, carbohydrate and fatty acid composition of a green microalga Scenedesmus obliquus for biofuel production.

Effect of various flue gas CO2 concentrations (5%, 10% and 14.1%) on growth rate and biochemical properties of a green microalga Scenedesmus obliquus was investigated. S. obliquus showed the highest biomass production and growth rate (0.36 g L-1 and µmax = 1.00 day-1), total inorganic carbon removal (35.8 mg L-1), lipid productivity (9.9 mg L-1 day) and carbohydrate productivity (10.3 mg L-1 day) with 14.1% CO2 after 8 days of cultivation. Fatty acid methyl ester analysis revealed that the palmitic and oleic acid contents were increased up to 5% and 7% with 14.1% CO2, respectively. Application of flue gas CO2 enhanced the growth along with lipid and carbohydrate productivity of S. obliquus, which can be exploited for reducing the CO2 concentration.

Microalga, Acutodesmus obliquus KGE 30 as a potential candidate for CO2 mitigation and biodiesel production.

In this study, the effect of flue gas CO2 on growth, lipid production, and fatty acid composition of a green microalga Acutodesmus obliquus KGE 30 was investigated. The highest growth rate (0.46 g L(-1) and µmax = 1.09 day(-1)), total inorganic carbon removal (95.9 mg L(-1)), and lipid productivity (20.1 mg L(-1) day L(-1)) was obtained at 14.1 % CO2 after 4 days of cultivation. In a semicontinuous batch reactor, the highest biomass production (1.19 g L(-1)) was achieved after 12 days with continuous injection of flue gas CO2. Compared with synthetic CO2, fatty acid methyl ester analysis showed that the amount of unsaturated fatty acid increased by 19.2 % with 14.1 % flue gas CO2. The application of flue gas CO2 improved biomass production and lipid productivity in A. obliquus. The current investigation demonstrated that the use of flue gas CO2 could reduce the cost of microalgae biomass production for better biofuel generation.

Biosorption of Cu(II) by immobilized microalgae using silica: kinetic, equilibrium, and thermodynamic study.

Immobilized microalgae using silica (IMS) from Micractinium reisseri KGE33 was synthesized through a sol-gel reaction. Green algal waste biomass, the residue of M. reisseri KGE33 after oil extraction, was used as the biomaterial. The adsorption of Cu(II) on IMS was tested in batch experiments with varying algal doses, pH, contact times, initial Cu(II) concentrations, and temperatures. Three types of IMSs (IMS 14, 70, and 100) were synthesized according to different algal doses. The removal efficiency of Cu(II) in the aqueous phase was in the following order: IMS 14 (77.0%) < IMS 70 (83.3%) < IMS 100 (87.1%) at pH 5. The point of zero charge (PZC) value of IMS100 was 4.5, and the optimum pH for Cu(II) adsorption was 5. Equilibrium data were described using a Langmuir isotherm model. The Langmuir model maximum Cu(II) adsorption capacity (q m) increased with the algal dose in the following order: IMS 100 (1.710 mg g(-1)) > IMS 70 (1.548 mg g(-1)) > IMS 14 (1.282 mg g(-1)). The pseudo-second-order equation fitted the kinetics data well, and the value of the second-order rate constant increased with increasing algal dose. Gibbs free energies (ΔG°) were negative within the temperature range studied, which indicates that the adsorption process was spontaneous. The negative value of enthalpy (ΔH°) again indicates the exothermic nature of the adsorption process. In addition, SEM-energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared (FT-IR), and X-ray photoelectron spectroscopy (XPS) analyses of the IMS surface reveal that the algal biomass on IMS is the main site for Cu(II) binding. This study shows that immobilized microalgae using silica, a synthesized biosorbent, can be used as a cost-effective sorbent for Cu(II) removal from the aqueous phase.

Biodegradation of carbamazepine using freshwater microalgae Chlamydomonas mexicana and Scenedesmus obliquus and the determination of its metabolic fate.

This study evaluated the toxicity and cellular stresses of carbamazepine (CBZ) on Chlamydomonas mexicana and Scenedesmus obliquus, and its biodegradation by both microalgal species. The growth of both microalgal species decreased with increase of CBZ concentration. The growth of S. obliquus was significantly inhibited (97%) at 200 mg CBZ L(-1), as compared to the control after 10days; whereas, C. mexicana showed 30% inhibition at the same experimental conditions. Biochemical characteristics including total chlorophyll, carotenoid contents and enzyme activities (SOD and CAT) for both species were affected by CBZ at relatively high concentration. C. mexicana and S. obliquus could achieve a maximum of 35% and 28% biodegradation of CBZ, respectively. Two metabolites (10,11-dihydro-10,11-expoxycarbamazepine and n-hydroxy-CBZ) were identified by UPLC-MS, as a result of CBZ biodegradation by C. mexicana. This study demonstrated that C. mexicana was more tolerant to CBZ and could be used for treatment of CBZ contaminated wastewater.

As(III) and As(V) removal from the aqueous phase via adsorption onto acid mine drainage sludge (AMDS) alginate beads and goethite alginate beads.

Acid mine drainage sludge (AMDS) is a solid waste generated following the neutralization of acid mine drainage (AMD). This material entrapped in calcium alginate was investigated for the sorption of As(III) and As(V). Three different adsorbent materials were prepared: AMDS alginate beads (AABs), goethite alginate beads (GABs), and pure alginate beads. The effects of pH and the adsorption kinetics were investigated, and the adsorption isotherms were also evaluated. The optimum pH range using the AABs was determined to be within 2-10 for As(III) and 2-9 for As(V). Adsorption equilibrium data were evaluated using the Langmuir isotherm model, and the maximum adsorption capacity qmax was 18.25 and 4.97 mg g(-1) for As(III) on AAB and GAB, respectively, and 21.79 and 10.92 mg g(-1) for As(V) on AAB and GAB, respectively. The adsorption of As(III) and As(V) was observed to follow pseudo-second order kinetics. The As K-edge X-ray absorption near-edge structure (XANES) revealed that the adsorbed As(III) on the AABs was oxidized to As(V) via manganese oxide in the AMDS.

Effect of food wastewater on biomass production by a green microalga Scenedesmus obliquus for bioenergy generation.

Effect of food wastewater (FW) on the biomass, lipid and carbohydrate production by a green microalga Scenedesmus obliquus cultivated in Bold's Basal Medium (BBM) was investigated. Different dilution ratios (0.5-10%) of BBM either with FW or salt solution (NaCl) or sea water (SW) were evaluated. S. obliquus showed the highest growth (0.41 g L(-1)), lipid productivity (13.3 mg L(-1) day L(-1)), carbohydrate productivity (14.7 mg L(-1) day L(-1)) and nutrient removal (38.9 mg TN L(-1) and 12.1 mg TP L(-1)) with 1% FW after 6 days of cultivation. The FW promoted algal autoflocculation due to formation of inorganic precipitates at an alkali pH. Fatty acid methyl ester analysis revealed that the palmitic and oleic acid contents were increased up to 8% with FW. Application of FW improved the growth, lipid/carbohydrate productivity and biomass recovery efficiency of S. obliquus, which can be exploited for cost effective production of microalgae biomass.

Application of acid mine drainage for coagulation/flocculation of microalgal biomass.

A novel application of acid mine drainage (AMD) for biomass recovery of two morphologically different microalgae species with respect to AMD dosage, microalgal cell density and pH of medium was investigated. Optimal flocculation of Scenedesmus obliquus and Chlorella vulgaris occurred with 10% dosage of AMD at an initial pH 9 for both 0.5 and 1.0 g/L cell density. The flocculation efficiency was 89% for S. obliquus and 93% for C. vulgaris. Zeta potential (ZP) was increased from -10.66 to 1.77 and -13.19 to 1.33 for S. obliquus and C. vulgaris, respectively. Scanning electron microscope with energy-dispersive X-ray of the microalgae floc confirmed the sweeping floc formation mechanism upon the addition of AMD. Application of AMD for the recovery of microalgae biomass is a cost-effective method, which might further allow reuse of flocculated medium for algal cultivation, thereby contributing to the economic production of biofuel from microalgal biomass.

Enhancement of microalgae growth and fatty acid content under the influence of phytohormones.

The growth of Scenedesmus obliquus improved with increase in phytohormones concentrations (10(-8)-10(-)(5)M). Indole-3-acetic acid (IAA) supported the maximum growth at 10(-5)M with 17.7×10(6)cells/mL and total fatty acid of 97.9mg/g-DCW, enhancing the growth by 1.9-fold compared to control (9.5×10(6)cells/mL). While 10(-5)M of a newly discovered phytohormone Diethyl aminoethyl hexanoate (DAH) demonstrated a 2.5-fold higher growth with 23.5×10(6)cells/mL and a total fatty acid content of 100mg/g-DCW. Poly-unsaturated fatty acid content increased up to 56% and 59% at 10(-)(5)M of IAA and DAH, respectively. The highest carbohydrate content (33% and 34%) achieved at 10(-8)M and 10(-5)M of IAA and DAH, respectively. While, the highest protein content (34% and 35%) obtained at 10(-8)M of IAA and DAH, respectively. The current investigation demonstrates that phytohormones accelerate microalgal growth and induce the quality and quantity of fatty acid content for biodiesel production.