Mechanically and Thermally Stable Cathode Electrolyte Interphase Enables High-temperature, High-voltage Li||LiCoO2 Batteries.

The development of high-energy-density Li||LiCoO2 batteries is severely limited by the instability of cathode electrolyte interphase (CEI) at high voltage and high temperature. Here we propose a mechanically and thermally stable CEI by electrolyte designing for achieving the exceptional performance of Li||LiCoO2 batteries at 4.6 V and 70 °C. 2,4,6-tris(3,4,5-trifluorophenyl)boroxin (TTFPB) as the additive could preferentially enter into the first shell structure of PF6 - solvation and be decomposed on LiCoO2 surface at low oxidation potential to generate a LiBx Oy -rich/LiF-rich CEI. The LiBx Oy surface layer effectively maintained the integrity of CEI and provided excellent mechanical and thermal stability while abundant LiF in CEI further improved the thermal stability and homogeneity of CEI. Such CEI drastically alleviated the crack and regeneration of CEI and irreversible phase transformation of the cathode. As expected, the Li||LiCoO2 batteries with the tailored CEI achieved 91.9 % and 74.0 % capacity retention after 200 and 150 cycles at 4.6 and 4.7 V, respectively. Moreover, such batteries also delivered an unprecedented high-temperature performance with 73.6 % capacity retention after 100 cycles at 70 °C and 4.6 V.

Efficient Laser-Induced Construction of Oxygen-Vacancy Abundant Nano-ZnCo2 O4 /Porous Reduced Graphene Oxide Hybrids toward Exceptional Capacitive Lithium Storage.

Recently, binary ZnCo2 O4 has drawn enormous attention for lithium-ion batteries (LIBs) as attractive anode owing to its large theoretical capacity and good environmental benignity. However, the modest electrical conductivity and serious volumetric effect/particle agglomeration over cycling hinder its extensive applications. To address the concerns, herein, a rapid laser-irradiation methodology is firstly devised toward efficient synthesis of oxygen-vacancy abundant nano-ZnCo2 O4 /porous reduced graphene oxide (rGO) hybrids as anodes for LIBs. The synergistic contributions from nano-dimensional ZnCo2 O4 with rich oxygen vacancies and flexible rGO guarantee abundant active sites, fast electron/ion transport, and robust structural stability, and inhibit the agglomeration of nanoscale ZnCo2 O4 , favoring for superb electrochemical lithium-storage performance. More encouragingly, the optimal L-ZCO@rGO-30 anode exhibits a large reversible capacity of ≈1053 mAh g-1 at 0.05 A g-1 , excellent cycling stability (≈746 mAh g-1 at 1.0 A g-1 after 250 cycles), and preeminent rate capability (≈686 mAh g-1 at 3.2 A g-1 ). Further kinetic analysis corroborates that the capacitive-controlled process dominates the involved electrochemical reactions of hybrid anodes. More significantly, this rational design holds the promise of being extended for smart fabrication of other oxygen-vacancy abundant metal oxide/porous rGO hybrids toward advanced LIBs and beyond.

Stabilizing the cycling stability of rechargeable lithium metal batteries with tris(hexafluoroisopropyl)phosphate additive.

The application of rechargeable lithium metal batteries (LMBs) has been hindered by the fast growth of lithium dendrites during charge and the limited cycling life because of the decomposition of the electrolyte at the interface. Here, we have developed a non-flammable triethyl phosphate (TEP)-based electrolyte with tris(hexafluoroisopropyl)phosphate (THFP) as an additive. The polar nature of the C-F bonding and the rich CF3 groups in THFP lowers its LUMO energy and HOMO energy to help form a stable, LiF-rich solid electrolyte interphase (SEI) layer through the reduction of THFP and increases the binding ability of the PF6- anions, which significantly suppresses lithium dendrite growth and reduces the electrolyte decomposition. Moreover, THFP participates in the formation of a thin, C-F rich electrolyte interphase (CEI) layer to provide the stable cycling of the cathode at a high voltage. The symmetric Li||Li and full Li/NCM622 cells with THFP additive have small polarization and long cycling life, which demonstrates the importance of the additive to the application of the LMBs.

Separator-Wetted, Acid- and Water-Scavenged Electrolyte with Optimized Li-Ion Solvation to Form Dual Efficient Electrode Electrolyte Interphases via Hexa-Functional Additive.

The performance of lithium metal batteries (LMBs) is determined by many factors from the bulk electrolyte to the electrode-electrolyte interphases, which are crucially affected by electrolyte additives. Herein, the authors develop the heptafluorobutyrylimidazole (HFBMZ) as a hexa-functional additive to inhibit the dendrite growth on the surface of lithium (Li) anode, and then improve the cycling performance and rate capabilities of Li||LiNi0.6 Co0.2 Mn0.2 O2 (NCM622). The HFBMZ can remove the trace H2 O and HF from the electrolyte, reducing the by-products on the surface of solid electrolyte interphase (SEI) and inhibiting the dissolution of metal ions from NCM622. Also, the HFBMZ can enhance the wettability of the separator to promote uniform Li deposition. HFBMZ can make Li+ easy to be desolvated, resulting in the increase of Li+ flux on Li anode surface. Moreover, the HFBMZ can optimize the composition and structure of SEI. Therefore, the Li||Li symmetrical cells with 1 wt% HFBMZ-contained electrolyte can achieve stable cycling for more than 1200 h at 0.5 mA cm-2 . In addition, the capacity retention rate of the Li||NCM622 can reach 92% after 150 cycles at 100 mA g-1 .

Hierarchical Ti3C2@TiO2 MXene hybrids with tunable interlayer distance for highly durable lithium-ion batteries.

To realize high-rate and long-term performance of rechargeable batteries, the most effective approach is to develop an advanced hybrid material with a stable structure and more reaction active sites. Recently, 2D MXenes have become an up-and-coming electrode owing to their high conductivity and large redox-active surface area. In this work, we firstly prepared Ti3C2 MXenes through the selective etching of silicon from Ti3SiC2 (MAX) using HF and an oxidant for highly durable lithium-ion batteries (LIBs). The interlayer distance of Ti3C2 MXenes can be controlled with the oxidizability of the oxidant and etching temperature. In addition, Ti3C2@TiO2 MXene hybrids with further expanded interlayer spacing were purposefully fabricated by a simple hydrothermal method. The hierarchical N-doped Ti3C2@TiO2 MXene hybrids show that the in situ synthesized nanoscale TiO2 particles are loaded homogeneously on the layered N-doped Ti3C2 surface. The interlayer distance of N-doped Ti3C2@TiO2 MXene can reach 12.77 Å when using HNO3 as the oxidant at room temperature. As an anode material, the N-doped Ti3C2@TiO2(HNO3-RT) hybrid displays a high reversible capacity of 302 mA h g-1 at 200 mA g-1 after 500 cycles and 154 mA h g-1 at 2000 mA g-1 after 1500 cycles, which indicates its long cycle lifetime and excellent stability in LIBs. This highly durable LIB anode performance is ascribed to synergetic contributions from the high capacitive contribution, high electrical conductivity, high-capacity of in situ formed nanoscale TiO2 and interlayer-expanded architecture of the N-doped Ti3C2@TiO2(HNO3-RT). This study provides a theoretical basis for the application of MXenes as high capacity anodes for advanced LIBs.