RESUMO
Silica nanoparticles were ozone-treated to increase the dispersibility of silica in a silicone matrix. Silicone rubber/silica composites were prepared using a melt-blending method. The effect of silica content on the mechanical and thermal properties of the silica-reinforced silicone composites was examined. The tensile strength of the prepared silicone/silica composites was maximized at 1 wt.% silica, due to the improved interfacial interactions between the silica reinforcement surface and the silicone matrix. The thermal stability of the composites was significantly enhanced with increasing silica content.
RESUMO
Epoxy resin is extensively applied in the electronics and electrical fields because of its outstanding comprehensive performance. However, the low thermal conductivity (TC) limits its application in thermal interface materials. In the present work, epoxy-based hybrid composites with high TC were prepared by using expanded graphite (EG) and copper (Cu) nanoparticles as thermally conductive hybrid fillers via hot blending and compression-curing processes. Additionally, the influence of the Cu content on the thermal properties, mechanical properties, and morphology of each epoxy/EG/Cu composite was investigated. According to the results, the epoxy/EG/Cu composite showed a maximum TC of 9.74 W/(m·K) at a fixed EG content of 60 wt % owing to the addition of 10 wt % Cu. After the addition of 10 wt % Cu, the flexural strength, flexural modulus, and impact strengths of epoxy/EG/Cu composites were improved from 27.9 MPa, 9.72 GPa, and 0.81 kJ/m2 to 37.5 MPa, 10.88 GPa, and 0.91 kJ/m2, respectively. Hence, this study offers a feasible strategy for the design of epoxy hybrid composites with excellent TC that can be applied to thermal interface materials.
RESUMO
In this study, to improve the electrical properties and impact strength of phenolic formaldehyde (PF) resin, PF-based composites were prepared by mixing graphene and the ionic liquid 3-decyl-bis(1-vinyl-1H-imidazole-3-ium-bromide) (C10[VImBr]2) via hot blending and compression-curing processes. The graphene surface was modified using a silane coupling agent. The synergistic effect of graphene and C10[VImBr]2 on the electrical properties, electromagnetic shielding efficiency, thermal stability, impact strength, and morphology of PF/graphene and PF/graphene/C10[VImBr]2 composites was then investigated. It was found that the electrical conductivity of the composites significantly increased from 2.3 × 10-10 to 4.14 × 10-3 S/m with an increase in the graphene content from 0 to 15 wt %, increasing further to 0.145 S/m with the addition of 5 wt % C10[VImBr]2. The electromagnetic shielding efficiency of the composite increased from 4.70 to 28.64 dB with the addition of 15 wt % graphene, while the impact strength of the composites rose significantly from 0.59 to 1.13 kJ/m2 with an increase in the graphene content from 0 to 15 wt %, reaching 1.53 kJ/m2 with the addition of 5 wt % C10[VImBr]2. Scanning electron microscopy images of the PF/GNP/C10[VImBr]2 composites revealed a rough morphology with numerous microcracks.
RESUMO
Polymer foams have low density, good heat insulation, good sound insulation effects, high specific strength, and high corrosion resistance, and are widely used in civil and industrial applications. In this paper, the classification of polymer foams, principles of the foaming process, types of blowing agents, and raw materials of polymer foams are reviewed. The research progress of various foaming methods and the current problems and possible solutions are discussed in detail.
RESUMO
In this study, the effects of fluorine treatment on surface properties, surface free energies, and dielectric constants of polyimide thin films were studied using X-ray photoelectron spectroscopy, contact angles, and dielectric characteristics, respectively. The glass transition temperature of fluorinated polyimide film gradually decreases with increasing fluorine pressure. The surface free energies and dielectric constants of the film decreased with increasing amount of the treatment fluorine gas. It was explained that the replacement of fluorine led to a decrease of the local electron polarization of polyimide and an increase of the free volume, which could be attributed to the relatively large volume of fluorine.