A retrospective study of alveolar bone remodelling after anterior retraction in orthodontic tooth extraction cases with clear aligners and fixed appliances.

OBJECTIVES: To evaluate alveolar bone dimensions and its relationship with tooth movement (retraction, intrusion and torque) during orthodontic treatment with fixed appliance and clear aligners. METHODS: Thirty-two patients were included in this retrospective clinical study. Cone beam computed tomography (CBCT) was collected before and after treatment to measure the volume of dehiscence and fenestrations in the maxillary anterior region, anterior alveolar bone thickness and height and degree of tooth movement. Rank-sum tests were used to compare the differences in alveolar bone defect volumes between clear aligners and fixed appliance, multiple linear regression analysis was used for study evaluation, and kappa statistics were used to assess internal consistency and test-retest reliability. RESULTS: Post-operatively, most alveolar bone defects occurred on the labial side. The incidence of bone fenestration was 23.96% in the clear aligner group and 26.18% in the fixed appliance group, which was higher than the incidence of bone dehiscence (5.21%). The labial bone height decreased by 0.272 mm, and the palatal bone height increased by 0.617 mm for every 1 mm downward intrusion of the anterior tooth apex in the fixed appliance group. In the clear aligner group, there was no significant change in the labial bone height, and the palatal bone height decreased by 0.447 mm for every 1 mm of anterior tooth retraction coronally. CONCLUSIONS: In the fixed appliance group, anterior tooth intrusion and retraction may have led to alveolar bone resorption by its compression at the cervical level. This study provides a three-dimensional tooth movement evaluation method by using CBCT.

Actual contribution ratio of maxillary and mandibular molars for total molar relationship correction during maxillary molar sequential distalization using clear aligners with Class II elastics: A finite element analysis.

INTRODUCTION: Class II elastics, in combination with clear aligners (CA), are efficient for molar distalization. However, the effects of this combination on intermaxillary molar relationship correction have yet to be investigated. This study aimed to investigate the actual contribution ratio of the maxillary and mandibular molars for total molar relationship correction during maxillary molar distalization using Class II elastics with CA and further explore therapeutic recommendations for clinical practice. METHODS: Finite element models (FEMs) were established, including the distalization of the second molars (Set I), followed by the distalization of the first molars (Set II). Model A simulated elastics attached by precision cutting, whereas Model B simulated elastics attached to buttons. Force magnitudes of 100 g, 150 g, and 200 g of force were applied. We recorded the contribution ratio of the maxillary and mandibular molars for total molar relationship correction, effective distalizing distance in 0.25 mm step distance, tipping and rotation angles, and the hydrostatic stress in the periodontal ligament. RESULTS: During maxillary molar distalization, mesialization of the mandibular molar had a notable contribution ratio for molar relationship correction. The mandibular first molar was mesialized with mesiolingual rotation tendency. Approximately half of the 0.25 mm step distance was occupied by maxillary molar distalization; the remainder was occupied by anchorage teeth mesialization and tipping or rotation. When traction forces increased, the total molar relationship correction and effective distalization increased; the mandibular molars mesialization contribution ratio also increased, as did rotation and inclination tendency. Precision cutting had a higher total molar relationship correction and more effective distalization than a button but also had a larger contribution ratio of mandibular molar mesialization and inclination or rotation. CONCLUSIONS: Mandibular molar mesialization should be considered when correcting the molar relationship using CA with intermaxillary elastics during maxillary molar distalization. It is also important to consider the anchorage teeth mesialization and undesired tipping or rotation.

Three dimensional quantitative study of soft tissue changes in nasolabial folds after orthodontic treatment in female adults.

BACKGROUND: With the popularity of medical aesthetic programs, some female adults who will or are undergoing orthodontic treatment often wonder whether orthodontic treatment has adverse effects on the nasolabial folds (NLFs). The aims of the study were to investigate any potential changes in the NLFs and associated peripheral soft tissues after orthodontic treatment of female adults. METHODS: This study compared changes in the NLFs and peripheral soft tissues in female adults undergoing orthodontic treatment using the 3dMD Face system (3dMD, Atlanta, Ga). A total of 52 adult female patient cases (24 teeth extraction, 28 non-teeth extraction) were included to evaluate the effects of different orthodontic treatment regimens on the NLFs and peripheral soft tissues. RESULTS: In the NLFs area, the landmarks of the extraction group were all significantly negatively changed (P < 0.001; the NLF2s average value was - 0.72 mm), and the upper and middle parts of the landmarks were negatively changed in the non-extraction group (P < 0.05; the NLF2s average value was - 0.22 mm). Compared to the non-extraction group, the negative changes in the extraction group were more pronounced (P < 0.005). In the lip region, all landmarks in the extraction group were negative changes (P < 0.05; upper lip (ULP) = - 0.93 mm, lower lip (LLP) = - 1.46 mm), and most landmarks in the non-extraction group were positive changes (P < 0.01; ULP = 0.55 mm). In the cheek area, the left and right buccal of the extraction and non-extraction groups were all negatively changed (P < 0.05), and there was no significant difference between the two groups. CONCLUSION: After orthodontic treatment, the NLFs showed negative changes, which were more obvious in the extraction group. The lip soft tissue had a negative change in the extraction group and a positive change in the non-extraction group, indicating that orthodontic treatment affected the soft tissue around the nasolabial sulcus, and that tooth extraction would lead to more negative changes.

N6-methyladenosine promotes osteogenic differentiation of PDLSCs from periodontitis patients.

OBJECTIVES: This study aimed to investigate the mechanism of N6-methyladenosine (m6A) in the osteogenic differentiation of periodontal ligament stem cells (PDLSCs) from periodontitis patients. METHODS: Differentially m6A-methylated lncRNA/mRNA profiles were detected by a m6A epitranscriptomic microarray. Bioinformatics analysis was performed by Gene Ontology and Kyoto Encyclopedia of Genes and Genomes pathway analysis. The transfection efficiency of the lentivirus was detected. The osteogenic activity of PDLSCs from periodontitis patients (PPDLSCs) was assessed. RESULTS: The microarray results showed that 275 lncRNAs and 1292 mRNAs were significantly differentially methylated between PPDLSCs and PDLSCs from healthy people. Among those lncRNAs, lncRNA4114 (transcript_ID: ENST00000444114) showed both reduced m6A methylation levels and expression levels in PPDLSCs. Further bioinformatics analysis predicted that the differentially methylated mRNAs were mainly involved in cell interaction, stem cell pluripotency, and osteogenic differentiation signals. Then, overexpression of methyltransferase like 3 (METTL3) promoted the osteogenic differentiation of PPDLSCs, while knocking down METTL3 showed an inhibitory effect. Furthermore, METTL3 overexpression promotes the stability of lncRNA4114 to upregulate the expression level. Moreover, lncRNA4114 overexpression promoted the osteogenic differentiation of PPDLSCs. CONCLUSION: METTL3 promotes the osteogenic differentiation of PPDLSCs by regulating the stability of lncRNA4114.

CXCL8, MMP12, and MMP13 are common biomarkers of periodontitis and oral squamous cell carcinoma.

OBJECTIVE: To analysis the relationship between periodontitis (PD) and oral squamous cell carcinoma (OSCC) by bioinformatic analysis. MATERIALS AND METHODS: We analyzed the gene expression profiles of PD (GSE16134) from the Gene Expression Omnibus (GEO) database and OSCC samples from TCGA-HNSC (head and neck squamous cell carcinoma) and identified common differentially expressed genes (DEGs) in PD and OSCC. Then, functional annotation and signaling pathway enrichment, protein interaction network construction, and hub gene identification were performed. Subsequently, the function and signaling pathway enrichment of hub genes, miRNA interaction, and transcription factor interaction analyses were carried out. We analyzed GSE10334 and GSE30784 as validation datasets, and performed qRT-PCR experiments simultaneously for validation, and obtained 4 hub genes. Finally, immune infiltration analysis and clinical correlation analysis of 4 hub genes and related miRNAs were performed. RESULTS: We identified 31 DEGs (16 up-regulated and 15 down-regulated). Four hub genes were obtained by qRT-PCR and validation dataset analysis, including IL-1ß, CXCL8, MMP12, and MMP13. The expression levels of them were all significantly upregulated in both diseases. The functions of these genes focus on three areas: neutrophil chemotaxis, migration, and CXCR chemokine receptor binding. Key pathways include IL-17 signaling pathway, chemokine signaling pathway, and cytokine-cytokine receptor interactions pathway. Immune infiltration analysis showed that the expressions of 4 hub genes were closely related to a variety of immune cells. ROC curve analysis indicated that AUCs of 4 hub genes are all greater than 0.7, among which MMP12 and MMP13 were greater than 0.9. Kaplan-Meier survival analysis indicated that worse OS was strongly correlated with CXCL8 and MMP13 high-expression groups. MMP12 low-expression group was strongly associated with worse OS. The results of multivariate Cox regression analysis showed that age, N stage, CXCL8, MMP12, and MMP13 were independent prognostic factors for OS. We also identified 3 miRNAs, including hsa-miR-19b-3p, hsa-miR-181b-2-3p, and hsa-miR-495-3p, that were closely related to 4 hub genes. Hsa-miR-495-3p is closely related to the diagnosis and prognosis of OSCC. CONCLUSIONS: We identified 4 hub genes between PD and OSCC, including IL-1ß, CXCL8, MMP12, and MMP13. These genes may mediate the co-morbid process of PD and OSCC through inflammation-related pathways such as the IL-17 signaling pathway. It is worth noting that CXCL8, MMP12, and MMP13 have great significance in the diagnosis and prognosis of OSCC.

Profiles of facial soft tissue changes during and after orthodontic treatment in female adults.

BACKGROUND: Some female adults who received orthodontic treatment often complain about thinner faces, protruding cheekbones and sunken temples, even at the beginning of treatment. The present research aimed to explore facial soft tissue changes during and after orthodontic treatment, as well as the related factors affecting facial soft tissue changes. METHODS: This study used 3dMD stereo photography technology to compare facial soft tissue changes among adult females who received orthodontics. A total of 52 adult females (24 teeth extraction, 28 non-teeth extraction cases) were included and potential correlations between related factors (facial morphology features, the change of occlusal height and dental arch width) were evaluated during different treatment periods. RESULTS: Overall, 3D-negative soft tissue changes of the buccal region moderately correlated with distances of nasion-menton and subnasale-menton (both rs = 0.30, P < 0.05) as well as the ratio of subnasale-menton/right gonion-left gonion (rs = 0.33, P < 0.05) and nasion-menton/right zygomatic point-left zygomatic point (rs = 0.30, P < 0.05). Among the 3D angle measurements, the right chelion-median upper lip point-left chelion angle was found to have a moderate correlation with 3D negative changes of the upper cheilion region (rs = 0.31, P < 0.01). Analysis of occlusal height changes revealed that an increase in the posterior facial height (nasion-gonial distance) may be a risk factor for negative changes in the zygomatic arch area. In addition, a moderate positive correlation between the maxillary first molar width changes and 3D-negative changes of the lower cheek region was found (rs = 0.41, P < 0.05). CONCLUSIONS: After orthodontic treatment, adult females with wide and short faces may be prone to negative soft tissue changes. Changes of posterior facial height and arch width between the first molars were also risk factors for negative changes of facial soft tissues. Extraction is not a major factor producing facial soft tissue changes.

The three-dimensional displacement tendency of teeth depending on incisor torque compensation with clear aligners of different thicknesses in cases of extraction: a finite element study.

BACKGROUND: Despite the popularity of clear aligner treatment, the effect of the thickness of these aligners has not been fully investigated. The objective of this study was to assess the effects of incisor torque compensation with different thicknesses of clear aligner on the three-dimensional displacement tendency of teeth in cases of extraction. METHODS: Three-dimensional finite element models of the maxillary dentition with extracted first premolars, maxilla, periodontal ligaments, attachments, and aligners were constructed and subject to Finite Element Analysis (FEA). Two groups of models were created: (1) with 0.75 mm-thick aligners and (2) with 0.5 mm-thick aligners. A loading method was developed to simulate the action of clear aligners for the en masse retraction of the incisors. Power ridges of different heights were applied to both groups to mimic torque control, and the power ridges favoring the translation of the central incisors were selected. Then, we used ANSYS software to analyze the initial displacement of teeth and the principle stress on the PDL. RESULTS: Distal tipping, lingual tipping and extrusion of the incisors, distal tipping and extrusion of the canines, and mesial tipping and intrusion of the posterior teeth were all generated by clear aligner therapy. With the 0.5 mm-thick aligner, a power ridge of 0.7 mm could cause bodily retraction of the central incisors. With the 0.75 mm-thick aligner, a power ridge of 0.25 mm could cause translation of the central incisors. Aligner torque compensation created by the power ridges generated palatal root torque and intrusion of the incisors, intrusion of the canines, mesial tipping and the intrusion of the second premolar; these effects were more significant with a 0.75 mm-thick aligner. After torque compensation, the stress placed on the periodontal ligament of the incisors was distributed more evenly with the 0.75 mm-thick aligner. CONCLUSIONS: The torque compensation caused by power ridges can achieve incisor intrusion and palatal root torque. Appropriate torque compensation with thicker aligners should be designed to ensure bodily retraction of anterior teeth and minimize root resorption, although more attention should be paid to the anchorage control of posterior teeth in cases of extraction.

Effects of upper-molar distalization using clear aligners in combination with Class II elastics: a three-dimensional finite element analysis.

INTRODUCTION: The effects of upper-molar distalization using clear aligners in combination with Class II elastics for anchorage reinforcement have not been fully investigated yet. The objective of this study is to analyze the movement and stress of the whole dentition and further explore guidelines for the selection of traction methods. METHODS: Three-dimensional (3D) finite element models are established to simulate the sequential molar distalization process, including the initial distalization of the 2nd molar (Set I) and the initial distalization of the 1st molar (Set II). Each group set features three models: a control model without Class II elastics (model A), Class II elastics attached to the tooth by buttons (model B), and Class II elastics attached to the aligner by precision cutting (model C). The 3D displacements, proclination angles, periodontal ligament (PDL) hydrostatic stress and alveolar bone von Mises stress in the anterior area are recorded. RESULTS: In all of the models, the maxillary anterior teeth are labial and mesial proclined, whereas the distal moving molars exhibit distal buccal inclination with an extrusion tendency. With the combination of Class II elastics, the anchorage was effectively reinforced; model C demonstrates superior anchorage reinforcement with lower stress distribution in comparison with model B. The upper canines in model B present an extrusion tendency. Meanwhile, the mandibular dentition in models B and C experience undesired movement tendencies with little discrepancy from each other. CONCLUSIONS: Class II elastics are generally effective for anchorage reinforcement as the upper-molar distalization is performed with clear aligners. Class II elastics attached to an aligner by precision cutting is a superior alternative for maxillary anchorage control in cases that the proclination of upper incisors and extrusion of upper canines are unwanted.

Involvement of astrocytes activation in orofacial hyperalgesia induced by experimental tooth movement.

OBJECTIVE: The study aimed to investigate the involvement of astrocytes in the medullary dorsal horn (MDH) in the orofacial hyperalgesia induced by experimental tooth movement (ETM) and related mechanism. MATERIALS AND METHODS: Experimental tooth movement was produced with nickel-titanium alloy closed-coil spring fixed between the left maxillary first molar and the left upper incisor. Fluorocitrate was administrated through medullary subarachnoid at 3 days after ETM. Pressure pain threshold (PPT) in masseter cutaneous area was measured. The expression of glial fibrillary acidic protein (GFAP) and c-Fos in MDH was measured using immunofluoroscence staining. The expression of interleukin-1ß (IL-1ß) and phosphorylated N-methyl-D-aspartic acid (NMDA) receptor subunit NR1 (p-NR1) was measured with Western blotting. RESULTS: Experimental tooth movement-induced orofacial hyperalgesia from 1 to 9 days as the PPT was significantly reduced (P < .05). Immunofluoroscence staining showed that the expression of c-Fos in MDH was dramatically upregulated at 1 day and 3 days after ETM, while GFAP expression with both immunofluoroscence staining and Western blotting was significantly enhanced at 3 days and 7 days after ETM. Western blotting analysis indicated that the expression of IL-1ß and p-NR1 in MDH was significantly enhanced at 3 days after ETM. Furthermore, we found that fluorocitrate administration at 3 days after ETM could markedly suppress the expression of c-Fos, GFAP, IL-1ß and p-NR1 and attenuate the reduction of PPT induced by ETM. CONCLUSION: Astrocyte activation in MDH is involved in the mechanical hyperalgesia, and the subsequent upregulated IL-1ß and overexpression of p-NR1 may participate in this process.

Periostin regulates osteogenesis of mesenchymal stem cells from ovariectomized rats through actions on the ILK/Akt/GSK-3ß Axis.

Osteoporosis is a condition of the skeleton that mainly results from estrogen deficiency. Periostin is a matricellular component in bone that is involved in osteoblast differentiation. However, how Periostin promotes osteogenesis remains largely unknown. Here, we isolated bone marrow skeletal stem cells (BMSCs) derived from an ovariectomy (OVX)-induced osteoporosis rat model and the effects of periostin on BMSCs derived from OVX rats (OVX-BMSCs) were assessed. Overexpression of periostin enhanced alkaline phosphatase (ALP) and alizarin red staining in OVX-BMSCs as well as the osteogenic genes OCN, BSP and Runx2. ILK is a downstream effector of signals from the extracellular matrix and participates in bone homeostasis. Overexpression of periostin also increased expression of protein levels for ILK, as well as the downstream targets pAkt and pGSK3ß. Suppression of ILK or Akt partially suppressed the enhancement of osteogenic ability induced by periostin overexpression in OVX-BMSCs. Thus, periostin may promote the osteogenic ability of OVX-BMSCs through actions on the ILK/Akt/GSK3ß axis.

ATP6V1H regulates the growth and differentiation of bone marrow stromal cells.

ATP6V1H encodes subunit H of vacuolar ATPase (V-ATPase) and may regulate osteoclastic function. The deficiency of ATP6V1H caused bone loss in human, mouse and zebrafish. In this report, we identified the mechanisms by which ATP6V1H regulates proliferation and differentiation of bone marrow stromal cells (BMSCs). We found that ATP6V1H was expressed in BMSCs, and Atp6v1h+/- BMSCs exhibited the lower proliferation rate, cell cycle arrest and reduced osteogenic differentiation capacity, as well as the increased adipogenic potentials. Histologic analysis confirmed less bone formation and more fatty degeneration in Atp6v1h+/- mice in the different age groups. Q-PCR analysis revealed that loss of ATP6V1H function downregulated the mRNA level of TGF-ß1 receptor, and its binding molecule, subunit ß of adaptor protein complex 2 (AP-2), suggesting ATP6V1H regulates the proliferation and differentiation of BMSCs by interacting with TGF-ß receptor I and AP-2 complex.

Effects of occlusion on mandibular morphology and architecture in rats.

BACKGROUND: A rodent occlusal hypofunction model has been widely established in jawbone-related studies. However, the effects of occlusal stimuli, with total elimination of molar contacts, and its rehabilitation on mandibular remodeling remain unclear. MATERIALS AND METHODS: Forty-eight 5-wk-old Sprague-Dawley male rats were used. Twenty-four experimental rats underwent occlusal hypofunction by insertion of a bite-raising appliance. Twenty-four rats received no treatment (control group). Two weeks later, half the experimental rats (occlusal hypofunction group) were killed; the appliance was removed from the remaining experimental rats (recovery group) for two additional weeks before killing. Control animals were killed biweekly. Body weight and masseter muscle weight were measured, and the mandibles were subjected to micro-computed tomography to evaluate the mandibular morphology and cortical bone characteristics. The expressions of osteoblast- and osteoclast-related genes were evaluated with quantitative polymerase chain reaction. RESULTS: No significant body weight differences were observed between the experimental and control rats. However, lighter masseter muscle, shorter mandibular incisor crown, mandibular body and ramus, and higher mandibular alveolar process and first molar fossae were observed in the occlusal hypofunction group. Moreover, the cortical bone characteristics associated with the expression of osteoblast- and osteoclast-related genes were remarkably different in the central and posterior mandible in the occlusal hypofunction group. At the 2-wk recovery time point after occlusal stimuli, the altered parameters in the masseter and mandible returned to normal levels. CONCLUSIONS: Mandibular remodeling via bone turnover is region specific for altered occlusal stimuli. Normal occlusion is an important determinant of the mandibular morphology and architecture.

Regulation of OPG and RANKL expressed by human dental follicle cells in osteoclastogenesis.

We investigate whether the expression of the receptor activator of nuclear factor kappa-B ligand (RANKL) and osteoprotegerin (OPG) in human dental follicle cells (HDFCs) regulated by colony stimulating factor 1 (CSF-1), parathyroid hormone-related protein (PTHrP) and bone morphogenetic protein-2 (BMP-2) contributes to osteoclastogenesis. Adolescent human impacted third mandibular molars were used to separate HDFCs. These cells were incubated with PTHrP (10 ng/ml), CSF-1 (25 ng/ml), or BMP-2 (100 ng/ml) for 0.5, 1, 3, 6 and 12 h. The expression of OPG and RANKL was investigated by immunohistochemistry and reverse transcription polymerase chain reaction (RT-PCR). Two co-culture systems and tartrate-resistant acid phosphatase (TRAP) staining were used to examine osteoclast formation. Scanning electron microscopy was utilized for the resorption pit assay. RANKL and OPG were expressed innately in HDFCs. Exogenous PTHrP, CSF-1 and BMP-2 chronologically regulated the expression of RANKL and OPG in HDFCs. PTHrP and CSF-1 had similar regulative patterns leading to the up-regulated expression of RANKL and the down-regulated expression of OPG and opposite for BMP-2. The number of TRAP-positive peripheral blood mononuclear cells (PBMCs) slightly increased in contacted co-culture of HDFCs and PBMCs, whereas secreted OPG from HDFCs inhibited osteoclastogenesis in the transwell co-culture system. Contacted co-culture of HDFCs and PBMCs exhibited small and shallow resorption pits, whereas in the transwell co-culture system, secreted OPG from HDFCs reduced the resorption pits, reflecting the difference in osteoclast production. Collectively, we found a dual action of HDFCs in osteoclastogenesis; moreover, PTHrP, CSF-1 and BMP-2 might influence osteoclastogenesis by regulating the expression of RANKL and OPG in HDFCs.

Effect of occlusal hypofunction and its recovery on the three-dimensional architecture of mandibular alveolar bone in growing rats.

BACKGROUD: Normal occlusion is very important for physiological structure of mandible. However, the details of influences of occlusal hypofunction and its recovery on the three-dimensional architecture of mandibular alveolar bone in growing rats are still lacking. MATERIALS AND METHODS: Forty-eight growing male Sprague-Dawley rats were randomly divided into normal (n = 24), hypofunctional (n = 12), and recovery (n = 12) groups. The hypofunction group was developed by inserting a bite-raising appliance between the maxillary and mandibular incisors of the rats. Two weeks after insertion, the appliance was removed to result in the recovery group; the experiment continued for two additional weeks. The experimental animals and control animals were killed weekly. In addition to measuring the body weight and masseter muscle weight of the rats, the histomorphology and microstructure of the mandibular alveolar bone were scanned using microcomputed tomography. RESULTS: A lighter masseter muscle and a higher and narrower alveolar process were observed in the hypofunction group compared with the control animals (P < 0.05). Mandibular remodeling also occurred in the hypofunctional group, as demonstrated by a smaller trabecular cross-sectional area, looser trabecular bone, decreased bone volume fraction, trabecular thickness, trabecular number, and increased bone surface density and trabecular separation, especially at week 2 (P < 0.05). After removing the anterior bite-opening appliance, the altered masseter muscle weight and architecture of the mandibular alveolar bone were gradually reversed and reached normal levels at the end of the experiment (P > 0.05). CONCLUSIONS: A loss of occlusal stimuli can lead into mandibular alveolar bone remodeling, and the recovery of occlusion can restore the altered mandibular architecture in growing rats.

Analysis of 627 hospitalized maxillofacial-oral injuries in Xi'an, China.

BACKGROUND: Maxillofacial-oral injuries is a serious health problem in China. The main aetiologic factors and types of maxillofacial-oral injuries differ according to different geographical areas and socio-economic statuses of populations in different countries or within the same country. AIM: The aim of this study was to analyze the types and external causes of maxillofacial-oral injuries among hospitalized patients in Xi'an, China, and thereafter to determine the status of maxillofacial-oral injuries in this region and to provide clinical clues for a future prevention of these injuries. MATERIAL AND METHODS: Totally, 627 patients aged 3-64 years with maxillofacial-oral injuries, who were hospitalized in two public stomatological hospitals in Xi'an from 1 January 2008 to 31 December 2008, were included in this study. The types and external causes of injuries were analyzed in terms of age, gender and urban and rural location. RESULTS: The results showed that jaw fractures (n = 406, 64.8%) and contusion/laceration injuries (n = 161, 25.7%) were the most frequent injuries. Injuries were 4.6 times more common in males than in females. Most maxillofacial-oral injuries occurred in those aged 18-59 years (71.1%), with a peak incidence in the 15- to 39-year-old group (31.4%). The proportion of patients from urban areas (45.5%) was lower than that from rural areas (54.4%). Regardless of gender, age and location, vehicle traffic accidents was the most common cause (n = 263, 41.9%), followed by falls (n = 109, 17.2%) and fighting-induced injuries (n = 87, 13.9%). CONCLUSIONS: Preventive strategies for maxillofacial-oral injuries due to traffic accidents should be emphasized and promoted in the first hand, especially for males, rural residents and those aged between 18 and 59 years.

Dental Artificial Intelligence Systems: A Review of Various Data Types.

With the rapid development of dental artificial intelligence systems (DAIS), a new field known as "Data Dentistry", proposed by Schwendicke in 2021, has successfully bridged the gap between medicine and engineering. This literature review introduces advanced techniques in data collection, outlines the current state of DAIS in data processing, and anticipates the future of DAIS by emphasizing the importance of more extensive and enhanced datasets. The key findings include: Versatility of imaging data: Various types of imaging data, such as X-ray, cone beam computed tomography (CBCT), facial photos, and face and oral scans, can be transformed into datasets used by artificial intelligence systems. Uniform rules in electronic dental record (EDR) systems: EDR systems require standardized rules for general use in DAIS, ensuring compatibility and seamless integration. Potential of wearable device data: Data from wearable devices, including bioelectric signals (such as electromyography), stress sensors, AR glasses, etc., show great potential for enhancing DAIS capabilities. Current DAIS performance focus: Presently, DAIS demonstrate superior performance in object location and disease diagnosis compared to information integration and clinical decision-making. Need for data quality and quantity improvement: Further improvements are needed in both the quality and quantity of data for DAIS.

Comparison between basal arch width in normal occlusions and class â ¡ malocclusions by using cone-beam computed tomography.

Objective: The purpose of this research was to investigate the measurements of maxillary and mandibular basal arch width in male and female with normal occlusion, and to compare dental arch width difference between normal occlusion and ClassⅡ malocclusion groups could be helpful in orthodontic diagnosis and treatment planning. Methods: Cone-beam computed tomography (CBCT) images from 133 individuals (76 males and 57 females) with normal occlusion and 64 (25 males and 39 females) with skeletal Class II malocclusions were evaluated. The distances between canines, first molars (basal arch widths: BAW) and second molars were measured from CRs (center of resistance) of the teeth and the projection of first molars on buccal bones (WALA distance) were measured. Results: There were significant differences in male and female maxillary and mandibular dental transverse widths. The normal range of the maxilla and mandible basal bone widths differences were -2 mm-2 mm (-0.05 ± 2.17 mm). The normal occlusion and Class Ⅱ groups exhibited significant differences in the width of the intercanine and first molars. Sella-nasion-A point angle (SNA) and Sella-nasion-B point angle (SNB) in the Class Ⅱ male group were positively correlated with the width between the maxillary canines. For individuals with normal occlusions, the width of the mandible at the second molar was greater than that of the maxilla, so more attention should be paid to the width of the second molar when considering clinical treatment. Conclusion: Measuring the width of the maxilla and mandible basal bones from the resistance center of the first molar was a feasible and repeatable method can be used in clinical practice. The data could serve as a reference for orthodontic treatment planning. More consideration should be paid to the horizontal dental problems of the treatment plan for Class Ⅱ patients. And the width of the mandible at the second molar was greater than that of the maxilla, so more attention should be paid during treatment.

Three-dimensional spatial analysis of temporomandibular joint in adolescent Class II division 1 malocclusion patients: comparison of Twin-Block and clear functional aligner.

BACKGROUND: Our study aimed to use three-dimensional (3D) spatial morphological measurement methods to compare the influence of Twin-Block and clear functional aligners on the temporomandibular joint (TMJ) of adolescent Class II division 1 malocclusion mandibular retraction patients. We also aimed to explore the similarities and differences in the effects on the TMJ upon using Twin-Block and clear functional aligner. METHODS: Cone-beam computed tomography (CBCT) data of 49 patients with Class II division 1 malocclusion (Twin-Block group: 24; clear functional aligner group: 25) were collected before and after functional orthodontic treatment, and a 3D model of the TMJ was reconstructed using MIMICS 21.0 software. Eighteen measurement parameters, including the anterior, superior, and posterior joint spaces, were measured and compared using the 3D model. RESULTS: After the two groups underwent functional appliance treatment, the height, volume, and surface area of the condyle, length of the mandibular ramus and mandibular length increased; The retro-displaced condyle moved to the middle position of the articular fossa, while the rest of the condylar position did not change significantly. Remodeling of the articular fossa after treatment was not evident. The superior joint space of the clear functional aligner group increased, but there was no significant change after Twin-Block appliances treatment. CONCLUSIONS: Both appliances promote condylar growth and sagittal and vertical development of the mandible in adolescent Class II division 1 malocclusion mandibular retraction patients. The length of the mandibular ramus showed a more significant increase following treatment with the Twin-Block appliances than with clear function aligners.

METTL3-Mediated m6A Modification Regulates the Osteogenic Differentiation through LncRNA CUTALP in Periodontal Mesenchymal Stem Cells of Periodontitis Patients.

Objective: Periodontitis is a chronic inflammatory disease that causes loss of periodontal support tissue. Our objective was to investigate the mechanism by which METTL3-mediated N6-methyladenosine modification regulates the osteogenic differentiation through lncRNA in periodontal mesenchymal stem cells in patients with periodontitis (pPDLSCs). Material and Methods. We carried out a series of experiments, including methylated RNA immunoprecipitation-PCR, quantitative real-time polymerase chain reaction, and western blotting. The expressions of alkaline phosphatase (ALP), Runx2, Col1, Runx2 protein level, ALP staining, and Alizarin red staining were used to demonstrate the degree of osteogenic differentiation. Results: We found that METTL3 was the most significantly differentially expressed methylation-related enzyme in pPDLSCs and promoted osteogenic differentiation of pPDLSCs. METTL3 regulated the stability and expression of lncRNA CUTALP, while lncRNA CUTALP promoted osteogenic differentiation of pPDLSCs by inhibiting miR-30b-3p. At different time points of osteogenic differentiation, lncRNA CUTALP expression was positively correlated with Runx2, while miR-30b-3p showed the opposite pattern. The attenuated osteogenic differentiation induced by METTL3 knockdown was recovered by lncRNA CUTALP overexpression. The attenuated osteogenic differentiation induced by lncRNA CUTALP knockdown could be reversed by the miR-30b-3p inhibitor. Conclusions: In summary, METTL3/lncRNA CUTALP/miR-30b-3p/Runx2 is a regulatory network in the osteogenic differentiation of pPDLSCs.

Orthodontic program design based on aesthetic.

Orthodontics is a discipline that is based on aesthetics. It coordinates the relationship among nose, lip, and chin through the movement of teeth and the adjustment of jaw relationship. Orthodontists need to fully analyze the patient's soft tissue profile before treatment. They also need to analyze the existing problems and those that may be solved or caused during orthodontics to guide the design of orthodontic treatment and effectively improve the clinical effect of orthodontics. This article reviews the aesthetic preconditions that guide the design of orthodontic treatment from the perspective of orthodontists.