RESUMO
In this article, we set up a methodology to investigate the relationship between the catalytic activity and the agglomeration state of platinum group metal-free ORR catalysts. To this end, we have developed a statistical approach based on scanning electrochemical microscopy (SECM) and atomic force microscopy (AFM). Two catalysts are investigated at very low loadings in order to access their intrinsic activity. Differences in terms of dispersion, stability of the inks, and adherence on the substrate are observed, highlighting the importance of measuring the exact amount and agglomeration state of the materials under study. The agglomeration state of the deposits measured by AFM explains the differences in activity measured by SECM. The performances of the catalysts are compared, and the contributions of the intrinsic activity and the agglomeration state are identified. This work paves the way toward various applications ranging from the benchmarking of new catalysts to the optimization of an ink formulation, for ORR and beyond.
RESUMO
We present a study of the excited state relaxation dynamics of the photosensitizer P1 used in p-type dye-sensitized solar cells. Comparative femtosecond fluorescence upconversion measurements in solution and in films show that the dye undergoes a picosecond electronic relaxation from the bright Franck-Condon (FC) state to a low-emitting charge-transfer (CT) state in polar environment. The fluorescence is moderately quenched in solution and on the mesoporous Al2O3 isolator but dramatically more on NiO semiconductor. We assign this sub-picosecond process to the hole injection thus confirming that the electron transfer is from the FC state directly into the NiO valence band.
RESUMO
A push-pull organic dye and a cobaloxime catalyst were successfully cografted on NiO and CuGaO2 to form efficient molecular photocathodes for H2 production with >80% Faradaic efficiency. CuGaO2 is emerging as a more effective p-type semiconductor in photoelectrochemical cells and yields a photocathode with 4-fold higher photocurrent densities and 400 mV more positive onset photocurrent potential compared to the one based on NiO. Such an optimized CuGaO2 photocathode was combined with a TaON|CoO x photoanode in a photoelectrochemical cell. Operated in this Z-scheme configuration, the two photoelectrodes produced H2 and O2 from water with 87% and 88% Faradaic efficiency, respectively, at pH 7 under visible light and in the absence of an applied bias, equating to a solar to hydrogen conversion efficiency of 5.4 × 10-3%. This is, to the best of our knowledge, the highest efficiency reported so far for a molecular-based noble metal-free water splitting Z-scheme.
RESUMO
There is a high interest in the development of new push-pull dyes for the use in dye sensitized solar cells. The pronounced charge transfer character of the directly photoexcited state is in principle favorable for a charge injection. Here, we report a time-resolved fluorescence study of a triphenylamine-bithiophene-naphthalimide dye in four solvents of varying polarity using fluorescence upconversion. The recording of femtosecond time-resolved fluorescence spectra corrected for the group velocity dispersion allows for a detailed analysis discriminating between spectral shifts and total intensity decays. After photoexcitation, the directly populated state (S1/FC) evolves toward a relaxed charge transfer state (S1/CT). This S1/CT state is characterized by a lower radiative transition moment and a higher nonradiative quenching. The fast dynamic shift of the fluorescence band is well described by solvation dynamics in polar solvents, but less so in nonpolar solvents, hinting that the excited-state relaxation process occurs on a free energy surface whose topology is strongly governed by the solvent polarity. This study underlines the influence of the environment on the intramolecular charge transfer (ICT) process, and the necessity to analyze time-resolved data in detail when solvation and ICT occur simultaneously.
RESUMO
The amazing properties of 2D materials are envisioned to revolutionize several domains such as flexible electronics, electrocatalysis, or biosensing. Herein we introduce scanning electrochemical microscopy (SECM) as a tool to investigate molybdenum disulfide in a straightforward fashion, providing localized information regarding the electronic transport within chemical vapor deposition (CVD)-grown crystalline MoS2 single layers having micrometric sizes. Our investigations show that within flakes assemblies some flakes are well electrically interconnected, with no detectable contact resistance, whereas others are not electrically connected at all, independent of the size of the physical contact between them. Overall, the work shows how the complex electronic behavior of MoS2 flake assemblies (semiconducting nature, contact quality between flakes) can be investigated with SECM.
RESUMO
The conformation and the two-dimensional self-assembly of 4'-(3',4â³-dihexyloxy-5,2':5',2â³:5â³,2â´-quaterthien-2,5â´-diyl)-bis(2,2':6',2â³-terpyridine) molecules are theoretically and experimentally investigated. This molecular building block forms a hydrogen-bonded chiral supramolecular nanoarchitecture on graphite at the solid/liquid interface. Scanning tunneling microscopy (STM) shows that the molecule adopts an S-shaped conformation in this structure. DFTB+ calculations reveal that this conformation is not the lowest-energy conformation. The molecular nanoarchitecture appears to be stabilized by hydrogen bonding as well as van der Waals interactions. I-, L-, and D-shaped molecular conformations are, however, locally observed at the domain boundary, but these conformations do not self-assemble into organized 2D structures.
RESUMO
The development of innovative techniques for the functionalization of carbon nanotubes that preserve their exceptional quality, while robustly enriching their properties, is a central issue for their integration in applications. In this work, we describe the formation of a covalent network of porphyrins around MWNT surfaces. The approach is based on the adsorption of cobalt(II) meso-tetraethynylporphyrins on the nanotube sidewalls followed by the dimerization of the triple bonds via Hay-coupling; during the reaction, the nanotube acts as a template for the formation of the polymeric layer. The material shows an increased stability resulting from the cooperative effect of the multiple π-stacking interactions between the porphyrins and the nanotube and by the covalent links between the porphyrins. The nanotube hybrids were fully characterized and tested as the supported catalyst for the oxygen reduction reaction (ORR) in a series of electrochemical measurements under acidic conditions. Compared to similar systems in which monomeric porphyrins are simply physisorbed, MWNT-CoP hybrids showed a higher ORR activity associated with a number of exchanged electrons close to four, corresponding to the complete reduction of oxygen into water.
RESUMO
Herein, we describe a new localized functionalization method of graphene oxide (GO) deposited on a silicon oxide surface. The functionalization starts with the reduction of GO by electrogenerated naphthalene radical anions. The source of reducers is a microelectrode moving close to the substrate in a typical scanning electrochemical microscopy (SECM) configuration. Then, the recovery of electronic conductivity upon reduction enables the selective electrochemical functionalization of the patterns. The illustrative example is the electrografting of reduced-GO with a diazonium salt bearing a protonated amino group that can further immobilize gold nanoparticles by simple immersion. This study opens new routes for the construction of multifunctional patterned surfaces.
RESUMO
This chapter aims to present recent examples of supramolecular functionalization of carbon nanotubes. The non-covalent functionalization appears as a solution for the future applications in nanotechnologies since it allows the functionalization and manipulation of nanotubes without the introduction of sp (3) defects in the π-conjugated system. Thus, the optical and electronic properties of the nanotubes remain preserved. In the first part of this chapter, we present the use of surfactant for the dispersion of nanotubes and its application for sorting. Then we report several examples of functionalization of nanotubes based on π-stacking interactions with pyrene derivatives. Finally, in the last part we review the wrapping of photo/electroactive polymers around the nanotube sidewalls. We put a particular focus on polyflurorene-based polymers and we show their utilization for the separation of nanotubes in diameter and chirality.
RESUMO
The future of energy supply depends on innovative breakthroughs regarding the design of cheap, sustainable and efficient systems for the conversion and storage of renewable energy sources. The production of hydrogen through water splitting seems a promising and appealing solution. We found that a robust nanoparticulate electrocatalytic material, H(2)-CoCat, can be electrochemically prepared from cobalt salts in a phosphate buffer. This material consists of metallic cobalt coated with a cobalt-oxo/hydroxo-phosphate layer in contact with the electrolyte and mediates H(2) evolution from neutral aqueous buffer at modest overpotentials. Remarkably, it can be converted on anodic equilibration into the previously described amorphous cobalt oxide film (O(2)-CoCat or CoPi) catalysing O(2) evolution. The switch between the two catalytic forms is fully reversible and corresponds to a local interconversion between two morphologies and compositions at the surface of the electrode. After deposition, the noble-metal-free coating thus functions as a robust, bifunctional and switchable catalyst.
RESUMO
Herein the synthesis, characterization, and organization of a first-generation dendritic fulleropyrrolidine bearing two pending porphyrins are reported. Both the dendron and the fullerene derivatives were synthesized by Cu(I) -catalyzed alkyne-azide cycloaddition (CuAAC). The electron-donor-acceptor conjugate possesses a shape that allows the formation of supramolecular complexes by encapsulation of C60 within the jaws of the two porphyrins of another molecule. The interactions between the two photoactive units (i.e., C60 and Zn-porphyrin) were confirmed by cyclic voltammetry as well as by steady-state and time-resolved spectroscopy. For example, a shift of about 85â mV was found for the first reduction of C60 in the electron-donor-acceptor conjugate compared with the parent molecules, which indicates that C60 is included in the jaws of the porphyrin. The fulleropyrrolidine compound exhibits a rich polymorphism, which was corroborated by AFM and SEM. In particular, it was found to form supramolecular fibrils when deposited on substrates. The morphology of the fibrils suggests that they are formed by several rows of fullerene-porphyrin complexes.
Assuntos
Fulerenos/química , Metaloporfirinas/química , Química Click , Reação de Cicloadição , Técnicas Eletroquímicas , Nanoestruturas/química , Polímeros/síntese química , Polímeros/químicaRESUMO
Nanographene materials are promising building blocks for the growing field of low-dimensional materials for optics, electronics and biophotonics applications. In particular, bottom-up synthesized 0D graphene quantum dots show great potential as single quantum emitters. To fully exploit their exciting properties, the graphene quantum dots must be of high purity; the key parameter for efficient purification being the solubility of the starting materials. Here, we report the synthesis of a family of highly soluble and easily processable rod-shaped graphene quantum dots with fluorescence quantum yields up to 94%. This is uncommon for a red emission. The high solubility is directly related to the design of the structure, allowing for an accurate description of the photophysical properties of the graphene quantum dots both in solution and at the single molecule level. These photophysical properties were fully predicted by quantum-chemical calculations.
RESUMO
The trapping of coronene and zinc phthalocyanine (ZnPc) molecules at low concentration by a two-dimensional self-assembled nanoarchitecture of a push-pull dye is investigated using scanning tunneling microscopy (STM) at the liquid-solid interface. The push-pull molecules adopt an L-shaped conformation and self-assemble on a graphite surface into a hydrogen-bonded Kagomé network with porous hexagonal cavities. This porous host-structure is used to trap coronene and ZnPc guest molecules. STM images reveal that only 11% of the Kagomé network cavities are filled with coronene molecules. In addition, these guest molecules are not locked in the host-network and are desorbing from the surface. In contrast, STM results reveal that the occupancy of the Kagomé cavities by ZnPc evolves linearly with time until 95% are occupied and that the host structure cavities are all occupied after few hours.
RESUMO
One of the major limitations yet to the global implementation of polymer electrolyte membrane fuel cells (PEMFCs) is the cathode catalyst. The development of efficient platinum-free catalysts is the key issue to solve the problem of slow kinetics of the oxygen reduction reaction (ORR) and high cost. We report a promising catalyst for ORR prepared through the annealing treatment under inert conditions of the cobalt-benzotriazole (Co-BTA) complex supported on carbon nanotubes (CNTs). The N-rich benzotriazole precursor was chosen based on its ability to complex Co(II) ions and generate under annealing highly reactive radicals able to tune the physicochemical properties of CNTs. X-Ray photoelectron spectroscopy (XPS) was used to follow the surface structure changes and highlight the active electrocatalytic sites towards the ORR. To achieve further evaluation of the catalysts in acidic medium, voltamperometry, rotating disk electrode (RDE), rotating ring-disk electrode (RRDE) and half-cell measurements were performed. The resulting catalysts (Co/N/CNTs) all show catalytic activity towards the ORR, the most active one resulting from annealing at 700 °C. The overall electron transfer number for the catalyzed ORR was determined to be â¼3.7 with no change upon the catalyst loading, suggesting that the ORR was dominated by a 4e(-) transfer process. The results indicate a promising alternative cathode catalyst for ORR in fuel cells, although its performance is still lower (overpotential around 110 mV evaluated by RDE and RRDE) than the reference Pt/C catalyst.
RESUMO
Water electrolysis powered by renewable energies is a promising technology to produce sustainable fossil free fuels. The development and evaluation of effective catalysts are here imperative; however, due to the inclusion of elements with different redox properties and reactivity, these materials undergo dynamical changes and phase transformations during the reaction conditions. NiMoO4 is currently investigated among other metal oxides as a promising noble metal free catalyst for the oxygen evolution reaction. Here we show that at applied bias, NiMoO4·H2O transforms into γ-NiOOH. Time resolved operando Raman spectroscopy is utilized to follow the potential dependent phase transformation and is collaborated with elemental analysis of the electrolyte, confirming that molybdenum leaches out from the as-synthesized NiMoO4·H2O. Molybdenum leaching increases the surface coverage of exposed nickel sites, and this in combination with the formation of γ-NiOOH enlarges the amount of active sites of the catalyst, leading to high current densities. Additionally, we discovered different NiMoO4 nanostructures, nanoflowers, and nanorods, for which the relative ratio can be influenced by the heating ramp during the synthesis. With selective molybdenum etching we were able to assign the varying X-ray diffraction (XRD) pattern as well as Raman vibrations unambiguously to the two nanostructures, which were revealed to exhibit different stabilities in alkaline media by time-resolved in situ and operando Raman spectroscopy. We advocate that a similar approach can beneficially be applied to many other catalysts, unveiling their structural integrity, characterize the dynamic surface reformulation, and resolve any ambiguities in interpretations of the active catalyst phase.
RESUMO
The attempt to decorate carbon nanotubes with organic molecules as a powerful means to form new functional materials has attracted broad attention in the scientific community. Here, we report the functionalization of single-walled carbon nanotubes (SWNTs) with zinc porphyrins (ZnP) using very mild conditions to afford a series of SWNTs-ZnP (1 and 2) electron donor-acceptor conjugates. Owing to the presence of either one or two ZnP, introduced via "click chemistry", different absorption cross sections were realized. Important in this context is that the covalent linkages between SWNT and ZnP were corroborated by monitoring the diagnostic signature of the nitrogen atoms as part of the formed triazole ring by X-ray photoelectron spectroscopy (XPS). The resulting SWNTs-ZnP 1 and 2 were fully characterized. This characterization was complemented by a full-fledged investigation of their electrochemical and photophysical properties. In particular, appreciably strong electronic coupling between the photo- and electroactive constituents (i.e., SWNT and ZnP) led to rapid excited-state deactivation of ZnP via charge transfer to the nanotubes. Here, the different absorption cross sections throughout the visible part of the solar spectrum turned out to be valuable in enhancing the overall light-harvesting features. Upon photoexcitation, for both SWNTs-ZnP 1 and 2, radical ion pair states (i.e., reduced SWNT and oxidized ZnP) are formed. The charge-separated states decay to regenerate the singlet ground state with lifetimes of 820 and 200 ps for 1 and 2, respectively.
Assuntos
Dendrímeros/química , Nanotubos de Carbono/química , Porfirinas/química , Microscopia de Força Atômica , Estrutura Molecular , Nanotubos de Carbono/ultraestruturaRESUMO
Boron doped diamond (BDD) functionalization has received an increasing interest during the last few years. Such an infatuation comes from the original properties of BDD, including chemical stability or an electrochemical window, that opens the way for the design of (bio)sensors or smart interfaces. In such a context, diazonium salts appear to be well suited for BDD functionalization as they enable covalent immobilization of functional entities such as enzymes or DNA. In this study we report microcrystalline BDD functionalization with a metallic complex, ruthenium tris(bipyridine), using the p-(tris(bipyridine)Ru(2+))phenyl diazonium salt. Electrografting using cyclic voltammetry (CV) allowed the formation of a ruthenium complex film that was finely characterized using electrochemistry and X-ray photoelectron spectroscopy (XPS). Moreover, we showed that chronopotentiometry (CP) is a convenient tool to monitor Ru complex film deposition through the control of the electrochemical pulse parameters (i.e. current density and pulse duration). Finally, such a control was demonstrated through the correlation between electrochemical and XPS characterizations.
Assuntos
2,2'-Dipiridil/análogos & derivados , Boro/química , Diamante/química , 2,2'-Dipiridil/química , Complexos de Coordenação , Compostos de Diazônio/química , Técnicas Eletroquímicas , Ouro/química , Estrutura Molecular , Espectroscopia Fotoeletrônica , Propriedades de SuperfícieRESUMO
There is a growing consensus that the charge separation taking place in dye-sensitized solar cells is a multiscale process occurring on a times scale from a few to hundreds of picoseconds. We studied the excited-state dynamics of the robust and efficient push-pull dye RK1 in solution, on mesoporous films and in complete photovoltaics cells by femtosecond fluorescence upconversion and transient absorption. In a polar environment and cells, the dynamics at early times are dominated by an intramolecular electronic relaxation, while electron injection is predominant on thin films only. In cells, the electron injection process becomes visible at a later stage, from tens to hundreds of picoseconds. Our study shows that it is crucial to record and analyze full time-resolved fluorescence spectra in order to obtain wavelength-independent dynamics and get a correct description of the nature and the population of the excited state.
RESUMO
In this work, a multifunctional non-toxic chromium free treatment is proposed. Hexavalent chromium, largely used for anticorrosion surface treatments of aluminum alloys in aeronautics, will soon be completely banned due to its high toxicity (European REACH regulation) and new solutions are required. Here, in a first step, a polymeric film was grafted at the aluminum surface by the surface induced reduction of a diazonium salt. In a second step, the grafted surface was submitted to an anodization treatment, forming a thick aluminum oxide layer protecting the underlying metal against corrosion. No change in the organic coating was detected after the second step of the process. This leads to a multilayer coating, which provides competitive results regarding both the adhesion of paint and corrosion protection.
RESUMO
Dye-sensitized photo-electrochemical cells (DS-PECs) form an emerging technology for the large-scale storage of solar energy in the form of (solar) fuels because of the low cost and ease of processing of their constitutive photoelectrode materials. Preparing such molecular photocathodes requires a well-controlled co-immobilization of molecular dyes and catalysts onto transparent semiconducting materials. Here we used a series of surface analysis techniques to describe the molecular assembly of a push-pull organic dye and a cobalt diimine-dioxime catalyst co-grafted on a p-type NiO electrode substrate. (Photo)electrochemical measurements allowed characterization of electron transfer processes within such an assembly and to demonstrate for the first time that a CoI species is formed as the entry into the light-driven H2 evolution mechanism of a dye-sensitized photocathode. This co-grafted noble-metal free H2-evolving photocathode architecture displays similar performances to its covalent dye-catalyst counterpart based on the same catalytic moiety. Post-operando time-of-flight secondary ion mass spectrometry (ToF-SIMS) analysis of these photoelectrodes after extensive photoelectrochemical operation suggested decomposition pathways of the dye and triazole linkage used to graft the catalyst onto NiO, providing grounds for the design of optimized molecular DS-PEC components with increased robustness upon turnover.