RESUMO
Sub-10 nm nanoparticles are known to exhibit extraordinary size-dependent properties for wide applications. Many approaches have been developed for synthesizing sub-10 nm inorganic nanoparticles, but the fabrication of sub-10 nm polymeric nanoparticles is still challenging. Here, a scalable, spontaneous confined nanoemulsification strategy that produces uniform sub-10 nm nanodroplets for template synthesis of sub-10 nm polymeric nanoparticles is proposed. This strategy introduces a high-concentration interfacial reaction to create overpopulated surfactants that are insoluble at the droplet surface. These overpopulated surfactants act as barriers, resulting in highly accumulated surfactants inside the droplet via a confined reaction. These surfactants exhibit significantly changed packing geometry, solubility, and interfacial activity to enhance the molecular-level impact on interfacial instability for creating sub-10 nm nanoemulsions via self-burst nanoemulsification. Using the nanodroplets as templates, the fabrication of uniform sub-10 nm polymeric nanoparticles, as small as 3.5 nm, made from biocompatible polymers and capable of efficient drug encapsulation is demonstrated. This work opens up brand-new opportunities to easily create sub-10 nm nanoemulsions and advanced ultrasmall functional nanoparticles.
RESUMO
Biological polyampholytes are ubiquitous in living organisms with primary functions including serving as transporters for moving chemical molecular species across the cell membranes. Synthetic amphoteric macromolecules that can change their phase states depending on the environment to simulate some properties of natural polyampholytes are of great interest. Here, the implementation of synthetic pseudo polymeric ampholytes is explored with ion-recognition-triggered conformational change. The phase transition behaviors of the ion-recognition-creative polyampholytes that contain deprotonated carboxylic acid groups as negative charges and 18-crown-6 units for forming positively charged host-guest complexes are systematically investigated. The ion-recognition-triggered phase transition behaviors of pseudo polyampholytes significantly depend on cation species and concentrations. Only those specific ions such as K+ , Ba2+ , Sr2+ and Pb2+ ions that can form 1:1 host-guest complexes with 18-crown-6 units in polymers enable control over conformational change like that of traditional pH-dependent polyampholytes. By regulating the content of carboxylic acid groups to match the content of ion-recognized positive charges provided by the host-guest complexes, the pseudo polyampholytes are more sensitive to the recognizable cations. Such ion-recognition-triggered amphoteric characteristics make the pseudo polyampholytes act like biological proteins, nucleic acids, and enzymes as molecular transporters, genetic code storage, and biocatalysts in artificial systems.
Assuntos
Ácidos Carboxílicos , Polímeros , Íons/química , Conformação Molecular , Transição de Fase , Polímeros/químicaRESUMO
Thermochromic poly(N-isopropyl acrylamide) (PNIPAM) photonic crystal gels based on 1D magnetically assembling colloidal nanocrystal clusters have attracted much attention due to its convenient preparation process, striking color response, and good mechanical strength. However, there remain challenges to broaden the thermochromic range and improve the sensitivity for their iridescent color display. Here, a PNIPAM photonic gel with wide thermochromic range and high sensitivity is prepared by using four-arm star poly(ethylene glycol) acrylamide (PEGAAm) as cross-linker at appropriately reduced magnetic field strength as well as cross-linker content. PEGAAm improves the homogeneity of the microstructure in PNIPAM photonic gel and thus maintains the structure colors at a wide temperature range from room temperature to 44 °C. The reduced magnetic field strength of 70 Gs and low cross-linker content (the molar ratio of monomer to cross-linker of 300:1) lead to a large initial lattice spacing of the photonic gel and thus wide diffraction wavelength migration of 194 nm. This optimized PNIPAM gel exhibits vivid iridescent colors from orange-red to indigo blue as temperature increases from 20 to 44 °C with satisfactory repeatability. Therefore, it may be an ideal candidate for temperature sensors and displays with utility and accuracy such as low-temperature burns.
Assuntos
Nanopartículas , Óptica e Fotônica , Géis , Fótons , TemperaturaRESUMO
Real-time online detection of trace threat analytes is critical for global sustainability, whereas the key challenge is how to efficiently convert and amplify analyte signals into simple readouts. Here we report an ultrasensitive microfluidic platform incorporated with smart microgel for real-time online detection of trace threat analytes. The microgel can swell responding to specific stimulus in flowing solution, resulting in efficient conversion of the stimulus signal into significantly amplified signal of flow-rate change; thus highly sensitive, fast, and selective detection can be achieved. We demonstrate this by incorporating ion-recognizable microgel for detecting trace Pb(2+), and connecting our platform with pipelines of tap water and wastewater for real-time online Pb(2+) detection to achieve timely pollution warning and terminating. This work provides a generalizable platform for incorporating myriad stimuli-responsive microgels to achieve ever-better performance for real-time online detection of various trace threat molecules, and may expand the scope of applications of detection techniques.
Assuntos
Dispositivos Lab-On-A-Chip , Chumbo/análise , Técnicas Analíticas Microfluídicas , Técnicas Analíticas Microfluídicas/instrumentação , Técnicas Analíticas Microfluídicas/métodos , Sensibilidade e EspecificidadeRESUMO
A novel thermoresponsive catalytic polyethersulfone membrane with multiscale pores is developed by constructing silver nanoparticles (Ag NPs) loaded poly(N-isopropylacrylamide) (PNIPAM) nanogels on pore walls of cellular pores as thermoresponsive gates and catalysts via vapor-induced phase separation. The Ag NPs are stably immobilized on the PNIPAM nanogels by an in situ reduction method based on the versatile adhesion and reduction properties of polydopamine. The micrometer cellular pores decorated with Ag NPs loaded PNIPAM nanogels are formed throughout the membrane and act as numerous microreactors with a large pore surface. The proposed membrane exhibits both satisfactory thermoresponsive characteristics and stable catalytic properties. The effects of operation temperature and reactant concentration of feed solution on the catalytic properties are investigated systematically. The results show that the apparent kinetic rate constant of catalytic reduction of 4-nitrophenol (4-NP) in water by reductant sodium borohydride (NaBH4 ), is ranging from 3.7 to 37.9 min-1 at temperatures from 20 to 45 ºC and the molar ratio of NaBH4 to 4-NP from 100:1 to 500:1. When the reactant concentration in feed solution fluctuates, the permeability or throughput of the membrane is simply adjusted by virtue of the thermoresponsive characteristics of membranes to achieve high catalytic conversion of reactant.
RESUMO
A simple device, which is equipped with a non-woven fabric filter medium immobilized with ion-recognizable smart hollow microgels, is developed for facile detection of trace lead(II) ions (Pb2+ ). The ion-recognizable smart microgels are made of poly(N-isopropylacrylamide-co-benzo-18-crown-6-acrylamide) (PNB), in which the 18-crown-6 groups act as the sensors of Pb2+ and the N-isopropylacrylamide groups act as the actuators. The PNB hollow microgels can isothermally change from a shrunk state to a swollen state in response to recognizing Pb2+ in the aqueous environment due to the electrostatic repulsion among the charged 18-crown-6/Pb2+ complex groups and the enhancement of hydrophilicity of the microgels. Due to the hollow structures, the PNB microgels show remarkable isothermal swelling ratio. Thus, the flux of solution pass through the non-woven fabric filter medium decreases significantly because of the remarkable reduction in the space for liquid flowing upon recognizing Pb2+ . The Pb2+ concentration can be detected quantitatively by simply and easily measuring the change of solution flux using the proposed device, which is operated without external power supply or spectroscopic measurements. The strategy proposed in this study provides a promising method for facile detection of trace Pb2+ in aqueous environments.
RESUMO
This work reports on a facile and flexible strategy based on the deformation of encapsulated droplets in fiber-like polymeric matrices for template synthesis of controllable microstructured materials from nonspherical microparticles to complex 3D helices. Monodisperse droplets generated from microfluidics are encapsulated into crosslinked polymeric networks via an interfacial crosslinking reaction in microchannel to in situ produce the droplet-containing, fiber-like matrices. By stretching and twining the dried fiber-like matrices, the encapsulated droplets can be flexibly engineered into versatile shapes for template synthesis of controllable nonspherical microparticles and helices. Moreover, magnetic helices can be fabricated by simply dispersing magnetic Fe3 O4 nanoparticles in the droplets to achieve rotational and translational motion under a rotated magnetic field. This work provides a simple and versatile strategy for the template synthesis of advanced functional microstructured materials with flexible shapes.
Assuntos
Microfluídica/métodos , Polímeros/química , Nanopartículas de Magnetita/química , Técnicas Analíticas Microfluídicas , Tamanho da PartículaRESUMO
Membranes are playing paramount roles in the sustainable development of myriad fields such as energy, environmental and resource management, and human health. However, the unalterable pore size and surface properties of traditional porous membranes restrict their efficient applications. The performances of traditional membranes will be weakened upon unavoidable membrane fouling, and they cannot be applied to cases where self-regulated permeability and selectivity are required. Inspired by natural cell membranes with stimuli-responsive channels, artificial stimuli-responsive smart gating membranes are developed by chemically/physically incorporating stimuli-responsive materials as functional gates into traditional porous membranes, to provide advanced functions and enhanced performances for breaking the bottlenecks of traditional membrane technologies. Smart gating membranes, integrating the advantages of traditional porous membrane substrates and smart functional gates, can self-regulate their permeability and selectivity via the flexible adjustment of pore sizes and surface properties based on the "open/close" switch of the smart gates in response to environmental stimuli. This tutorial review summarizes the recent developments in stimuli-responsive smart gating membranes, including the design strategies and the fabrication strategies that are based on the introduction of the stimuli-responsive gates after or during membrane formation, and the positively and negatively responsive gating models of versatile stimuli-responsive smart gating membranes, as well as the advanced applications of smart gating membranes for regulating substance concentration in reactors, controlling the release rate of drugs, separating active molecules based on size or affinity, and the self-cleaning of membrane surfaces. With self-regulated membrane performances, smart gating membranes show great power for use in global sustainable development.
RESUMO
A simple and efficient method is developed to fabricate monodisperse and fast-responsive poly(N-isopropylacrylamide) (PNIPAM) microgels with open-celled porous structure. First, numerous fine oil droplets are fabricated by homogeneous emulsification method and are then evenly dispersed inside monodisperse PNIPAM microgels as porogens via the combination of microfluidic emulsification and UV-initiated polymerization methods. Subsequently, the embedded fine oil droplets inside the PNIPAM microgels are squeezed out upon stimuli-induced rapid volume shrinkage of the microgels; as a result, a spongelike open-celled porous structure is formed inside the PNIPAM microgels. The open-celled porous structure provides numerous interconnected free channels for the water transferring convectively inward or outward during the volume phase transition process of PNIPAM microgels; therefore, the response rates of the PNIPAM microgels with open-celled porous structure are much faster than that of the normal ones in both thermo-responsive shrinking and swelling processes. Because of the fast-responsive characteristics, the microgels with open-celled porous structure will provide ever better performances in their myriad applications, such as microsensors, microactuators, microvalves, and so on.
Assuntos
Resinas Acrílicas/química , Emulsões , Géis , Microscopia Eletrônica de Varredura , Porosidade , Temperatura , Fatores de TempoRESUMO
Novel dual molecular- and ion-recognition responsive poly(N-isopropylacrylamide-co-benzo-12-crown-4-acrylamide) (PNB12 C4 ) linear copolymers with benzo-12-crown-4 (B12C4) as both guest and host units are prepared. The copolymers exhibit highly selective sensitivities toward γ-cyclodextrin (γ-CD) and Na(+) . The presence of γ-CD induces the lower critical solution temperature (LCST) of PNB12 C4 copolymer to shift to a higher value due to the formation of 1:1 γ-CD/B12C4 host-guest inclusion complexes, while Na(+) causes a negative shift in LCST due to the formation of 2:1 "sandwich" B12C4/Na(+) host-guest complexes. Regardless of the complexation order, when γ-CD and Na(+) coexist with PNB12 C4 , competitive complexation actions of B12C4 as both guest and host units toward γ-CD and Na(+) finally form equilibrium 2:2:1 γ-CD/B12C4/Na(+) composite complexes, and the final LCST values of PNB12 C4 copolymer reach almost the same level. The results provide valuable guidance for designing and applying PNB12 C4 -based smart materials in various applications.
Assuntos
Acrilamida/química , Acrilamidas/química , Éteres de Coroa/química , Polímeros/química , Íons/química , Transição de Fase , Polímeros/síntese química , Sódio/química , gama-Ciclodextrinas/químicaRESUMO
Developing a hemostatic material suitable for rapid hemostasis remains a challenge. This study presents a novel aminated gelatin sponge cross-linked with dialdehyde starch, exhibiting excellent biocompatibility and hemostatic ability. This aminated gelatin sponge features hydrophilic surface and rich porous structure with a porosity of up to 80 %. The results show that the aminated gelatin sponges exhibit superior liquid absorption capacity and can absorb up to 30-50 times their own mass of simulated body fluid within 5 min. Compared with the commercial gelatin hemostatic sponge and non-aminated gelatin hemostatic sponge, the aminated gelatin hemostatic sponge can accelerate the hemostatic process through electrostatic interactions, demonstrating superior hemostatic performance in both in vitro and in vivo hemostasis tests. The aminated gelatin sponge can effectively control the hemostatic time within 80 s in the in vivo rat femoral artery injury model, significantly outperforming both commercial and non-aminated gelatin sponges. In addition, the aminated gelatin sponge also exhibits good biocompatibility and certain antibacterial properties. The proposed aminated gelatin sponge has very good application prospects for the management of massive hemorrhage.
Assuntos
Materiais Biocompatíveis , Gelatina , Hemostáticos , Amido , Animais , Amido/química , Amido/farmacologia , Amido/análogos & derivados , Ratos , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Hemostáticos/química , Hemostáticos/farmacologia , Gelatina/química , Gelatina/farmacologia , Masculino , Porosidade , Ratos Sprague-Dawley , Hemorragia/tratamento farmacológico , Hemostasia/efeitos dos fármacos , Esponja de Gelatina Absorvível/química , Esponja de Gelatina Absorvível/farmacologia , Reagentes de Ligações Cruzadas/química , Artéria Femoral/efeitos dos fármacos , HumanosRESUMO
Most cases of delayed wound healing are associated with bacterial biofilm infections due to high antibiotic resistance. To improve patient compliance and recovery rates, it is critical to develop minimally invasive and efficient methods to eliminate bacterial biofilms as an alternative to clinical debridement techniques. Herein, we develop a dissolving microneedle system containing Ag nanoparticles (AgNPs)-decorated silk fibroin microspheres (SFM-AgNPs) and antibiotics for synergistic treatment of bacterial biofilm infection. Silk fibroin microspheres (SFM) are controllably prepared in an incompatible system formed by a mixture of protein and carbohydrate solutions by using a mild all-aqueous phase method and serve as biological templates for the synthesis of AgNPs. The SFM-AgNPs exert dose- and time-dependent broad-spectrum antibacterial effects by inducing bacterial adhesion. The combination of SFM-AgNPs with antibiotics breaks the limitation of the antibacterial spectrum and achieves better efficacy with reduced antibiotic dosage. Using hyaluronic acid (HA) as the soluble matrix, the microneedle system containing SFM-AgNPs and anti-Gram-positive coccus drug (Mupirocin) inserts into the bacterial biofilms with sufficient strength, thereby effectively delivering the antibacterial agents and realizing good antibiofilm effect on Staphylococcus aureus-infected wounds. This work demonstrates the great potential for the development of novel therapeutic systems for eradicating bacterial biofilm infections.
Assuntos
Fibroínas , Nanopartículas Metálicas , Infecções Estafilocócicas , Humanos , Antibacterianos/farmacologia , Fibroínas/farmacologia , Prata/farmacologia , Microesferas , Bactérias , Biofilmes , SedaRESUMO
A facile strategy for efficient and continuous fabrication of monodisperse gas-core microcapsules with controllable sizes and excellent ultrasound-induced burst performances is developed based on droplet microfluidics and interfacial polymerization. Monodisperse gas-in-oil-in-water (G/O/W) double emulsion droplets with a gas core and monomer-contained oil layer are fabricated in the upstream of a microfluidic device as templates, and then water-soluble monomers are added into the aqueous continuous phase in the downstream to initiate rapid interfacial polymerization at the O/W interfaces to prepare monodisperse gas-in-oil-in-solid (G/O/S) microcapsules with gas cores. The sizes of both microbubbles and G/O/W droplet templates can be precisely controlled by adjusting the gas supply pressure and the fluid flow rates. Due to the very thin shells of G/O/S microcapsules fabricated via interfacial polymerization, the sizes of the resultant G/O/S microcapsules are almost the same as those of the G/O/W droplet templates, and the microcapsules exhibit excellent deformable properties and ultrasound-induced burst performances. The proposed strategy provides a facile and efficient route for controllably and continuously fabricating monodisperse microcapsules with gas cores, which are highly desired for biomedical applications.
RESUMO
A novel, simple, portable, and low-cost method for diagnosis of hyperkalemia by using K(+)-recognizable poly(N-isopropylacrylamide-co-benzo-15-crown-5-acrylamide) [poly(NIPAM-co-B15C5Am)] linear copolymer as indicator is presented in this work. The pendent 15-crown-5 units in the linear copolymers can selectively and specifically recognize K(+) to form stable 2:1 "sandwich" host-guest complexes, which cause the copolymer chains to change from the hydrophilic state to the hydrophobic state isothermally, whereas other tested metal ions (e.g., Li(+), Na(+), Cs(+), Mg(2+), Ca(2+), Sr(2+), Ba(2+), Cu(2+), Fe(3+), Pb(2+), Cd(2+), Cr(3+)) cannot be recognized. With increasing the 15-crown-5 content or the K(+) concentration, the poly(NIPAM-co-B15C5Am) linear copolymers exhibit higher sensitivity to K(+). The hyperkalemia can be simply diagnosed by observing the K(+)-induced optical transmittance change of human blood samples with poly(NIPAM-co-B15C5Am) linear copolymer as an indicator. Normal blood samples with low potassium level containing the poly(NIPAM-co-B15C5Am) linear copolymer are almost transparent since the copolymer is hydrophilic and soluble at the operating temperature. However, severe hyperkalemia samples with high potassium level become completely cloudy since the copolymer is hydrophobic and insoluble at this temperature. The presented diagnosis method with poly(NIPAM-co-B15C5Am) linear copolymer as indicator is quite simple and low-cost, and it would bring a new candidate material to design simple and portable tools for diagnosis of hyperkalemia in the general population. Moreover, the results in this work provide valuable guidance for building novel poly(NIPAM-co-B15C5Am)-based artificial K(+)-recognizable "smart" or "intelligent" systems in various application fields.
Assuntos
Resinas Acrílicas/química , Técnicas Biossensoriais/métodos , Hiperpotassemia/sangue , Hiperpotassemia/diagnóstico , Potássio/química , Técnicas Biossensoriais/instrumentação , HumanosRESUMO
A composite separable microneedles (MNs) system consisting of silk fibroin (SF) needle tips and hyaluronic acid (HA) base is developed for transdermal delivery of salmon calcitonin (sCT) for therapy of osteoporosis. Poly(ethylene glycol) (PEG) is used to modulate the conformation structure of SF to achieve controllable sustained release of sCT. The prepared MNs can effectively penetrate the skin stratum corneum. After application to the skin, the HA base is dissolved within 2 min, allowing these SF drug depots to be implanted into the skin for controllable sustained release of sCT. The release kinetics of sCT can be controlled by regulating the conformation of SF with PEG and the interaction between sCT peptide and SF proteins. Compared with traditional needle injection, delivery of sCT using optimized HA-PEG/SF MNs shows better trabecular bone repair for ovariectomized-induced osteoporosis in mice. The proposed MNs system provides a new noninjection strategy for therapy of osteoporosis.
Assuntos
Calcitonina , Osteoporose , Camundongos , Animais , Preparações de Ação Retardada/farmacologia , Administração Cutânea , Calcitonina/farmacologia , Calcitonina/química , Osteoporose/tratamento farmacológico , Sistemas de Liberação de Medicamentos , AgulhasRESUMO
The development of materials with highly selective recognition towards Hg2+ is of great significance in environmental monitoring. Herein, a novel thermo-responsive copolymer with Hg2+ recognition property is prepared via thermally-initiated copolymerization of 5'-O-Acryloyl 5-methyl-uridine (APU) and N-isopropylacrylamide (NIPAM). The chemical structure and stimuli-sensitive properties of poly(N-isopropylacrylamide-co-5-methyl-uridine) (P(NIPAM-co-APU)) linear polymers and hydrogel are thoroughly investigated. At the supramolecular level, P(NIPAM-co-APU) linear polymers could respond to both temperature and Hg2+ stimuli with highly selective recognition towards Hg2+ over other 18 metal ion species (at least 5 fold difference) and common anions. Upon capturing Hg2+ by APU units as host metal receptors, the lower critical solution temperature (LCST) of P(NIPAM-co-APU, PNU-7 and PNU-11) linear polymers are significantly shifted more than 10 °C due to the formation of stable APU-Hg2+-APU directed host-guest complexes. Accordingly, at the macroscopic level, P(NIPAM-co-APU) hydrogel display selective and robust recognition of Hg2+ under optimum conditions, and its maximum Hg2+ uptake capacity was 33.1 mg g-1. This work provides a new option for Hg2+ recognition with high selectivity, which could be facilely integrated with other smart systems to achieve satisfactory detection of environmental Hg2+.
RESUMO
Ultrasensitive real-time detection of trace Pb2+ in continuous flow is vital to effectively and timely eliminate the potential hazards to ecosystem health and sustainability. This work reports on a micro-structured smart hydrogel grating with ultra-sensitivity, high selectivity, good transparency and mechanical property for real-time detection of Pb2+ in continuous flow. The hydrogel grating possesses uniform surface relief microstructures with periodic nano-height ridges made of poly(acrylamide-co-benzo-18-crown-6-acrylamide) networks that crosslinked by tetra-arm star poly(ethylene glycol)acrylamide. The hydrogel grating with good optical transparency and mechanical property can change its height via selective host-guest complexation with Pb2+ to output a changed diffraction efficiency. Meanwhile, the periodic nano-ridges with large specific area benefit the contact with Pb2+ for fast Pb2+-induced height change. Thus, with such rationally designed molecular structures and surface relief microstructures, the hydrogel grating integrated in a glass-based mini-chip allows real-time detection of Pb2+ in continuous flow with ultra-sensitivity and high selectivity. The hydrogel grating detector can achieve ultralow detection limit (10-9 M Pb2+), fast response (2 min), and selective detection of Pb2+ from dozens of interfering ions even with high concentrations. This high-performance hydrogel grating detector is general and can be extended to detect many analytes due to the wide choice of responsive hydrogels, thus opening new areas for creating advanced smart detectors in analytical science.
Assuntos
Hidrogéis , Chumbo , Hidrogéis/química , Ecossistema , Íons/química , AcrilamidaRESUMO
The development of transmucosal drug delivery systems is a practical requirement in oral clinical practice, and controlled sequential delivery of multiple drugs is usually required. On the basis of the previous successful construction of monolayer microneedles (MNs) for transmucosal drug delivery, we designed transmucosal double-layer sequential dissolving MNs using hyaluronic acid methacryloyl (HAMA), hyaluronic acid (HA), and polyvinyl pyrrolidone (PVP). MNs have the advantages of small size, easy operation, good strength, rapid dissolution, and one-time delivery of two drugs. Morphological test results showed that the HAMA-HA-PVP MNs were small and intact in structure. The mechanical strength and mucosal insertion test results indicated the HAMA-HA-PVP MNs had appropriate strength and could penetrate the mucosal cuticle quickly to achieve transmucosal drug delivery. The in vitro and in vivo experiment results of the double-layer fluorescent dyes simulating drug release revealed that MNs had good solubility and achieved stratified release of the model drugs. The results of the in vivo and in vitro biosafety tests also indicated that the HAMA-HA-PVP MNs were biosafe materials. The therapeutic effect of drug-loaded HAMA-HA-PVP MNs in the rat oral mucosal ulcer model demonstrated that these novel HAMA-HA-PVP MNs quickly penetrated the mucosa, dissolved and effectively released the drug, and achieved sequential drug delivery. Compared to monolayer MNs, these HAMA-HA-PVP MNs can be used as double-layer drug reservoirs for controlled release, effectively releasing the drug in the MN stratification by dissolution in the presence of moisture. The need for secondary or multiple injections can be avoided, thus improving patient compliance. This drug delivery system can serve as an efficient, multipermeable, mucosal, and needle-free alternative for biomedical applications.
RESUMO
Transcatheter arterial radioembolization (TARE) is of great significance for the treatment of advanced hepatocellular carcinoma (HCC). However, the existing radioembolic microspheres still have problems such as non-degradability, non-uniform size, and inability to directly monitor in vivo, which hinders the development of TARE. In this paper, a novel radioembolic agent, 131 I-labeled methacrylated gelatin microspheres (131 I-GMs), is prepared for the treatment of HCC. Water-in-oil (W/O) emulsion templates are prepared by a simple one-step microfluidic method to obtain methacrylated gelatin microspheres (GMs) after UV irradiation. A series of GMs with uniform and controllable size is obtained by adjusting the flow rate of each fluid. Both air-dried and freeze-dried GMs can quickly restore their original shape and size, and still have good monodispersity, elasticity, and biocompatibility. The radiolabeling experiments show that 131 I can efficiently bind to GMs by chloramine-T method, and the obtained 131 I-GMs have good radioactive stability in vitro. The results of in vivo TARE treatment in rats show that 131 I-GMs can be well retained in the hepatic artery and have a good inhibitory effect on the progression of liver cancer, showing the potential for the treatment of HCC.
Assuntos
Carcinoma Hepatocelular , Neoplasias Hepáticas , Ratos , Animais , Neoplasias Hepáticas/radioterapia , Neoplasias Hepáticas/patologia , Carcinoma Hepatocelular/radioterapia , Microesferas , Gelatina , MicrofluídicaRESUMO
Smart polymeric materials with dynamically tunable physico-chemical characteristics in response to changes of environmental stimuli, have received considerable attention in myriad fields. The diverse combination of their micro-/nano-structural and molecular designs creates promising and exciting opportunities for exploiting advanced smart polymeric materials. Engineering micro-/nano-structures into smart polymeric materials with elaborate molecular design enables intricate coordination between their structures and molecular-level response to cooperatively realize smart functions for practical applications. In this review, recent progresses of smart polymeric materials that combine micro-/nano-structures and molecular design to achieve designed advanced functions are highlighted. Smart hydrogels, gating membranes, gratings, milli-particles, micro-particles and microvalves are employed as typical examples to introduce their design and fabrication strategies. Meanwhile, the key roles of interplay between their micro-/nano-structures and responsive properties to realize the desired functions for their applications are emphasized. Finally, perspectives on the current challenges and opportunities of micro-/nano-structured smart polymeric materials for their future development are presented.