Interrelations between Linkage Isomers of an Efficient Square-planar Nickel(II) Nitrite Photoswitch in the Solid State.

An efficient nitrite nickel(II) photoswitch, with the 1-phenyl-2-hydroxyimino-3-[(2'-dimethylamino)ethyl]imino-1-propanone moiety used as the ancillary ligand, is reported. In the ground-state ('dark') crystal structure, the studied compound exists predominantly as the nitro-(η1 -N(O)2 ) isomer, however, traces of the exo- and endo-nitrito-(η1 -ONO) forms are detected both at 100 K (4-5 % each) and under ambient conditions (~9 % each). When excited with the 405-530 nm LED light, the nitro-to-nitrito isomerization takes place. The total conversion exceeds 90 %. The exo-nitrito linkage isomer constitutes the dominant photo-generated form, whereas the relative population of both nitrito species depends on temperature. The reaction is fully reversible and reproducible. The photo-products are stable up to 200 K. The system constitutes a good model case for the reaction mechanism studies. Thus, experimental and theoretical investigations on the photo-isomerism were conducted and are presented in detail. Eventually, the nitro→exo-nitrito→endo-nitrito reaction pathway is proposed.

Exploring Photoswitchable Properties of Two Nitro Nickel(II) Complexes with (N,N,O)-Donor Ligands and Their Copper(II) Analogues.

Two photoswitchable nickel(II) nitro coordination compounds and their copper(II) analogues are reported. In all these systems, the metal center is chelated by (N,N,O)-donor ligands containing either 2-picolylamine or 8-aminoquinoline fragments. The studied compounds were thoroughly investigated using crystallographic and spectroscopic techniques supplemented by computational analysis. They are easy to synthesize and stable, and all compounds undergo the nitro group isomerization reaction. Nevertheless, there are significant differences between the copper and nickel systems regarding their structural and switchable properties. According to the solid-state IR spectroscopy results, 400-660 nm light irradiation of the ground-state (η2-O,O')-κ-nitrito copper(II) complexes at 10 K induces a rather moderate conversion to a metastable linkage isomer, which is visible only up to approximately 60-80 K. In turn, upon visible light irradiation (ca. 530 nm excitation wavelength), the ground-state nitro isomers of the examined nickel(II) complexes transform into the endo-nitrito forms. It was possible to achieve about 35% conversion for both nickel(II) systems and to determine the resulting crystal structures at 160 K in the case of single crystals after 30-45 min of exposure to LED light (crystals decayed with longer irradiation), and roughly 95% conversion was achieved for thin-film samples as indicated by the IR spectroscopy results. Traces of the endo-nitrito linkage isomers remained up to 200-220 K, and the isomerization reaction was proven to be fully reversible.

Seed-skewness algorithm for X-ray diffraction signal detection in time-resolved synchrotron Laue photocrystallography.

A one-dimensional seed-skewness algorithm adapted for X-ray diffraction signal detection is presented and discussed. The method, primarily designed for photocrystallographic time-resolved Laue data processing, was shown to work well for the type of data collected at the Advanced Photon Source and European Synchrotron Radiation Facility. Nevertheless, it is also applicable in the case of standard single-crystal X-ray diffraction data. The reported algorithm enables reasonable separation of signal from the background in single one-dimensional data vectors as well as the capability to determine small changes of reflection shapes and intensities resulting from exposure of the sample to laser light. Otherwise, the procedure is objective, and relies only on skewness computation and its subsequent minimization. The new algorithm was proved to yield comparable results to the Kruskal-Wallis test method [Kalinowski, J. A. et al. (2012). J. Synchrotron Rad. 19, 637], while the processing takes a similar amount of time. Importantly, in contrast to the Kruskal-Wallis test, the reported seed-skewness approach does not need redundant input data, which allows for faster data collections and wider applications. Furthermore, as far as the structure refinement is concerned, the reported algorithm leads to the excited-state geometry closest to the one modelled using the quantum-mechanics/molecular-mechanics approach reported previously [Jarzembska, K. N. et al. (2014). Inorg. Chem. 53, 10594], when the t and s algorithm parameters are set to the recommended values of 0.2 and 3.0, respectively.

Boronate Covalent and Hybrid Organic Frameworks Featuring PIII and P=O Lewis Base Sites.

Invited for the cover of this issue is Sergiusz Lulinski and his co-workers from Warsaw University of Technology and University of Warsaw. The image depicts a journey through the interior of the porous Covalent Organic Framework containing phosphorus and boron centres with carbon dioxygen trapped inside an imagined cave. Read the full text of the article at 10.1002/chem.202001960.

Boronate Covalent and Hybrid Organic Frameworks Featuring PIII and P=O Lewis Base Sites.

Two covalent organic frameworks comprising Lewis basic PIII centers and Lewis acidic boron atoms were prepared by poly-condensation reactions of newly obtained tris(4-diisopropoxyborylphenyl)phosphine with 2,3,6,7,10,11-hexahydroxytriphenylene and 2,3,6,7-tetrahydroxy-9,10-dimethylanthracene. Obtained materials exhibit significant sorption of dihydrogen (100 cm3 g-1 at 1 bar at 77 K), methane (20 cm3 g-1 at 1 bar at 273 K) and carbon dioxide (50 cm3 g-1 at 1 bar at 273 K). They were exploited as solid-state ligands for coordination of Pd0 centers. Alternatively, in a bottom-up approach, boronated phosphine was treated with Pd2 dba3 and poly-condensated, yielding hybrid materials where the polymer networks are formed by means of covalent boronate linkages and coordination P-Pd bonds. In addition, the analogous materials based on phosphine oxide were synthesized. The DFT calculations on framework-guest interactions revealed that the behavior of adjacent boron and phosphorus/phosphine oxide centers is reminiscent of that found in Frustrated Lewis Pairs and may improve sorption of selected molecules.

Photo- and Thermoswitchable Half-Sandwich Nickel(II) Complex: [Ni(η5-C5H5)(IMes)(η1-NO2)].

A new photoswitchable half-sandwich nitro NiII complex with the N-heterocyclic carbene ligand was synthesized and successfully crystallized. The compound constitutes an analogue of a known nitrate nickel(II) compound, [Ni(η5-Cp)(IMes)(NO3)] (Cp = cyclopentadienyl, C5H5; IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene), and crystallizes with two symmetry-independent molecules in the asymmetric unit. When irradiated with 470 nm light-emitting diode light, the complex molecules undergo a photoisomerization reaction in the solid state. Formation of the respective NO2 group linkage isomers was studied photocrystallographically at different temperatures. After irradiation of the single-crystal sample for ca. 3 h at 100 K approximately 20% conversion of the η1-nitro (Ni-NO2) ligand to its exo-nitrito (Ni-ONO) form was observed. At ∼130 K the exo-nitrito binding mode transforms further to the more stable endo-nitrito conformation, whereas at temperatures higher than 175 K the crystal converts back to the ground state. It appears that the photoisomerization reaction can be to some extent triggered, or additionally stimulated, thermally. Consequently, the highest conversion level (ca. 90%) was achieved after sample irradiation at 145 K. Despite similar molecular energies and intermolecular interactions, the two symmetry-independent molecules behave somewhat differently upon irradiation and temperature changes. The photocrystallographic findings and molecular aspects were supplemented by theoretical computations, including the quantum-mechanics/molecular-mechanics approach.

Impact of High Pressure on Metallophilic Interactions and Its Consequences for Spectroscopic Properties of a Model Tetranuclear Silver(I)-Copper(I) Complex in the Solid State.

Structure-property relationships were investigated via combined high-pressure spectroscopic and X-ray diffraction techniques for a model luminescent Ag2Cu2L4 (L = 2-diphenylphosphino-3-methylindole) complex in the crystalline state. The experimental results were contributed by theoretical calculations, compared with the previously evaluated light-induced geometrical changes, and discussed in the context of available literature to date. To the best of our knowledge, this is the first study of this kind devoted to a coinage-metal complex for which the argentophilic interactions are crucial. High-pressure X-ray diffraction and optical spectroscopy experiments showed close correspondence between structural changes and optical properties. The unit-cell angles, absorption edges, emission maxima, decay lifetimes and silver-copper bond trends, all change around 2-3 GPa. A blue-shift to red-shift switch when increasing the pressure was observed for both absorption and emission spectra. This is unique behavior when compared to the literature-reported coinage metal systems. It also occurred that the pressure-induced structural changes differ notably from the geometrical distortions observed for the excited state. Interestingly, shortening of the Ag-Ag bond itself does not ensure the red shift of the absorption and emission spectra. All the optical spectroscopy data are suggestive of an important role of defects, likely related to the lack of a hydrostatic pressure transmitting medium, for pressures higher than 3 GPa.

Ground-State Charge-Density Distribution in a Crystal of the Luminescent ortho-Phenylenediboronic Acid Complex with 8-Hydroxyquinoline.

This contribution is devoted to the first electron density studies of a luminescent oxyquinolinato boron complex in the solid state. ortho-Phenylenediboronic acid mixed with 8-hydroxyquinoline in dioxane forms high-quality single crystals via slow solvent evaporation, which allows successful high resolution data collection (sin Î¸/λ = 1.2 Å-1) and charge density distribution modeling. Particular attention has been paid to the boron-oxygen fragment connecting the two parts of the complex, and to the solvent species exhibiting anharmonic thermal motion. The experiment and theory compared rather well in terms of atomic charges and volumes, except for the boron centers. Boron atoms, as expected, constitute the most electron-deficient species in the complex molecule, whereas the neighboring oxygen and carbon atoms are the most significantly negatively charged ones. This part of the molecule appears to be very much involved in the charge transfer occurring between the acid fragment and oxyquinoline moiety leading to the observed fluorescence, as supported by the time-dependent density functional theory (TDDFT) results and the generated transition density maps. TDDFT calculations indicated that p-type atomic orbitals contributing to the HOMO-1, HOMO, and LUMO play the major role in the lowest energy transitions, and enabled further comparison with the charge density features, which is discussed in details. Furthermore, the results confirmed the known fact the Q ligand character is most important for the spectroscopic properties of this class of complexes.

Shedding light on the photochemistry of coinage-metal phosphorescent materials: a time-resolved Laue diffraction study of an Ag(I)-Cu(I) tetranuclear complex.

The triplet excited state of a new crystalline form of a tetranuclear coordination d(10)-d(10)-type complex, Ag2Cu2L4 (L = 2-diphenylphosphino-3-methylindole ligand), containing Ag(I) and Cu(I) metal centers has been explored using the Laue pump-probe technique with ≈80 ps time resolution. The relatively short lifetime of 1 µs is accompanied by significant photoinduced structural changes, as large as the Ag1···Cu2 distance shortening by 0.59(3) Å. The results show a pronounced strengthening of the argentophilic interactions and formation of new Ag···Cu bonds on excitation. Theoretical calculations indicate that the structural changes are due to a ligand-to-metal charge transfer (LMCT) strengthening the Ag···Ag interaction, mainly occurring from the methylindole ligands to the silver metal centers. QM/MM optimizations of the ground and excited states of the complex support the experimental results. Comparison with isolated molecule optimizations demonstrates the restricting effect of the crystalline matrix on photoinduced distortions. The work represents the first time-resolved Laue diffraction study of a heteronuclear coordination complex and provides new information on the nature of photoresponse of coinage metal complexes, which have been the subject of extensive studies.

Correction: Porous oligomeric materials synthesised using a new, highly active precatalyst based on ruthenium(III) and 2-phenylpyridine.

Correction for 'Porous oligomeric materials synthesised using a new, highly active precatalyst based on ruthenium(III) and 2-phenylpyridine' by Kacper Poblocki et al., Dalton Trans., 2024, 53, 4194-4203, https://doi.org/10.1039/D3DT04091G.

Porous oligomeric materials synthesised using a new, highly active precatalyst based on ruthenium(III) and 2-phenylpyridine.

There are few literature reports on using precatalysts based on ruthenium(II/III) ions in the polymerization of olefins. Therefore, a new coordination compound was designed based on ruthenium(III) ion and 2-phenylpyridine. The resulting monocrystal was characterized by X-ray diffraction (XRD), solid-state (photo)IR spectroscopy, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The new ruthenium(III) complex compound was used as a precatalyst in the oligomerization reactions of ethylene, 2-propen-1-ol, 2-chloro-2-propen-1-ol, 3-butene-2-ol and 2,3-dibromo-2-propen-1-ol with methylaluminoxane and ethylaluminium dichloride as activators. The catalytic activity of the newly discovered ruthenium(III) complex compound ranges from 159.5 (for 2-chloro-2-propen-1-ol) to 755.6 (for ethylene) g mmol-1 h-1 bar-1, indicating that it is a chemical compound with high catalytic activity. In addition, the oligomerization reaction products were subjected to physicochemical characterization, using BET (Brunauer-Emmett-Teller isotherm), mass spectrometry (MALDI-TOF-MS), Fourier transform infrared (FT-IR) spectroscopy, NMR, TGA, differential scanning calorimetry (DSC), and the morphology of the porous polymeric materials was investigated by SEM. The distinguishing feature of the obtained precatalyst is its high catalytic activity under mild reaction conditions, a rare phenomenon. Compared with other precatalysts, it is the most active ruthenium(II/III) ion-based catalytic material used in oligo- and polymerization reactions of ethylene.

Correction: An optically reversible room-temperature solid-state cobalt(III) photoswitch based on nitro-to-nitrito linkage isomerism.

Correction for 'An optically reversible room-temperature solid-state cobalt(III) photoswitch based on nitro-to-nitrito linkage isomerism' by Krystyna A. Deresz et al., Chem. Commun., 2022, 58, 13439-13442, https://doi.org/10.1039/d2cc05134f.

Catalytic Properties of Two Complexes of chromium(III) and cobalt(II) with Nitrilotriacetate, Dipicolinate, and 4-Acetylpyridine.

In this paper, a synthesis of two innovative coordination compounds, based on chromium(III) and cobalt(II) ions with N,O-donor ligands (nitrilotriacetate, dipicolinate) and 4-acetylpyridine, is reported. The obtained metal-organic compounds were structurally characterized using the single-crystal X-ray diffraction (XRD) method. The well-defined chromium(III) and cobalt(II) complexes were used as precatalysts in the oligomerization reaction of 2-chloro-2-propen-1-ol and 2-propen-1-ol with methylaluminoxane (MMAO) as an activator. The products of the oligomerization reaction were subjected to full physicochemical characteristics, i.e., time-of-flight mass spectrometry (MALDI-TOF-MS), TGA, and differential scanning calorimetry (DSC) methods. The catalytic activity of the precatalysts in both reactions was calculated and compared with other catalysts known in the literature.

An optically reversible room-temperature solid-state cobalt(III) photoswitch based on nitro-to-nitrito linkage isomerism.

A simple trinitro cobalt complex [Co(3,3'-diamino-N-methylpropanediamine)(NO2)3] was proven to be photoswitchable at room temperature as the Pca21 polymorph with the maximum nitro-to-nitrito conversion reaching ca. 55%. Solid-state IR, UV-vis and XRD indicate that the transformation can be triggered optically in both ways via 470 nm and 570-660 nm LED light, respectively.

Macrocyclic multicenter complexes of nickel and copper of increasing complexity.

Multicenter (bi-, tri-, and tetranuclear) tetraazamacrocyclic complexes were self-assembled from Ni and Cu tetraazamacrocyclic mononuclear units and α,ω-diamines as building blocks. The structures of all compounds studied were proved by spectroscopic methods (ESI MS and NMR spectroscopy). Electrochemical experiments revealed reversible one-electron electrode processes at each of the Ni(2+) and Cu(2+) centers with formation of metal cations in oxidation state +3. Long linkers allow bi- and trinuclear complexes with noninteracting metal centers to be obtained. In the case of the short linkers (e.g. ethylenediamine) higher, trinuclear species are formed as major product. The structures of the bis- and tris-macrocyclic systems were confirmed by single-crystal X-ray diffraction. The tris-macrocyclic systems form cations in the shape of triangles partially filled with counterions and solvent molecules. The cations form positively charged layers, which interact in the crystal lattice with the neighboring negatively charged layers of anions. In solution, the trinuclear complexes exhibit strong host-guest interactions with 9,10-dimethyltriptycene due to complementarity of shape and size of this guest molecule. The association constants were determined by NMR spectroscopy and voltammetry, and very good agreement was obtained. The structural flexibility of the tetranuclear complex with long linkers allows for attractive interactions between the metal-complexing macrocycles that result in folding of the molecule. On the contrary, no folding is possible in the case of short linkers consisting of two CH(2) groups.

On the nature of Ni···Ni interaction in a model dimeric Ni complex.

A new dinuclear complex (NiC(5)H(4)SiMe(2)CHCH(2))(2) (2) was prepared by reacting nickelocene derivative [(C(5)H(4)SiMe(2)CH=CH(2))(2)Ni] (1) with methyllithium (MeLi). Good quality crystals were subjected to a high-resolution X-ray measurement. Subsequent multipole refinement yielded accurate description of electron density distribution. Detailed inspection of experimental electron density in Ni···Ni contact revealed that the nickel atoms are bonded and significant deformation of the metal valence shell is related to different populations of the d-orbitals. The existence of the Ni···Ni bond path explains the lack of unpaired electrons in the complex due to a possible exchange channel.

Optimizing the accuracy and precision of the single-pulse Laue technique for synchrotron photo-crystallography.

The accuracy that can be achieved in single-pulse pump-probe Laue experiments is discussed. It is shown that with careful tuning of the experimental conditions a reproducibility of the intensity ratios of equivalent intensities obtained in different measurements of 3-4% can be achieved. The single-pulse experiments maximize the time resolution that can be achieved and, unlike stroboscopic techniques in which the pump-probe cycle is rapidly repeated, minimize the temperature increase due to the laser exposure of the sample.

On the nature of the B...N interaction and the conformational flexibility of arylboronic azaesters.

It is shown that the structural and physicochemical properties of arylboronic azaesters result from the properties of the key B-N bond. This bond is different in arylboronic azaesters from typical single/double/triple B-N bonds present in other boron-nitrogen compounds. By studying a model example, 6-tert-butyl-2-(3',5'-difluorophenyl)-(N-B)-1,3,6,2-dioxazaborocane, it is proved that the molecule adopts the closed form in the solid state with the BN bond length equal to 1.7646(3) Å. This represents the longest B-N bond length for an arylboronic ester reported in literature. According to the results of experimental charge density studies and QTAIM analysis, the BN bond/contact shows good separation of the respective atomic basins and significant flexibility. The source function and NBO analyses indicate an evident involvement of the oxygen atoms in the creation of the B-N bonding. According to our DFT calculations the isolated model molecule exists in the open conformer. The constrained energy scans reveal an E(d(B-N)) potential energy surface which depends strongly on the nature of the substituents at the nitrogen and aromatic carbon atoms. It appears that an appropriate substitution can produce either conformer. A dipole moment analysis provides a good insight into the reactivity properties of the compound in solution. The opening of the azaester cage is associated with a breaking of the B-N bond, thus decreasing the magnitude of the dipole moment. The existence of the open conformer is confirmed by multi-temperature NMR studies. When decreasing the temperature of the measurements the (1)H and (11)B NMR spectra show features corresponding to the open form of the model arylboronic azaester.

An experimental charge density of HEPES.

We report the experimental charge density of HEPES [4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid], which is a common buffering agent. The structure was refined using the Hansen-Coppens formalism. The ability of the HEPES molecule to form stable intermolecular interactions and intermolecular hydrogen bonds in the crystal structure is discussed in terms of its buffering properties. The protonation mode observed in the crystal structure is different from that expected in solution, suggesting that additional factors must be taken into consideration in order to explain the solution properties of the compound. As ordered HEPES molecules are found in the active sites of proteins in several protein crystal structures, our results will allow for quantitative analysis of the electrostatic potential of the interacting surfaces of those proteins.

Instrument-model refinement in normalized reciprocal-vector space for X-ray Laue diffraction.

A simple yet efficient instrument-model refinement method for X-ray diffraction data is presented and discussed. The method is based on least-squares minimization of differences between respective normalized (i.e. unit length) reciprocal vectors computed for adjacent frames. The approach was primarily designed to work with synchrotron X-ray Laue diffraction data collected for small-molecule single-crystal samples. The method has been shown to work well on both simulated and experimental data. Tests performed on simulated data sets for small-molecule and protein crystals confirmed the validity of the proposed instrument-model refinement approach. Finally, examination of data sets collected at both BioCARS 14-ID-B (Advanced Photon Source) and ID09 (European Synchrotron Radiation Facility) beamlines indicated that the approach is capable of retrieving goniometer parameters (e.g. detector distance or primary X-ray beam centre) reliably, even when their initial estimates are rather inaccurate.