RESUMO
A stable nonlinear wave packet, self-localized in all three dimensions, is an intriguing and much sought after object in nonlinear science in general and in nonlinear photonics in particular. We report on the experimental observation of mode-locked spatial laser solitons in a vertical-cavity surface-emitting laser with frequency-selective feedback from an external cavity. These spontaneously emerging and long-term stable spatiotemporal structures have a pulse length shorter than the cavity round-trip time and may pave the way to completely independent cavity light bullets.
RESUMO
A semiconductor laser with delayed optical feedback is an experimental implementation of a nominally infinite dimensional dynamical system. As such, time series analysis of the output power from this laser system is an excellent test of complexity analysis tools, as applied to experimental data. Additionally, the systematic characterization of the range and variation in complexity that can be obtained in the output power from the system, which is available to be used in applications like secure communication, is of interest. Output power time series from a semiconductor laser system, as a function of the optical feedback level and the laser injection current, have been analyzed for complexity using permutation entropy. High resolution maps of permutation entropy as a function of optical feedback level and injection current have been achieved for the first time. This confirms prior research that identifies a coherence collapse region which is found to be uninterrupted with respect to any embedded islands with different dynamics. The results also show new observations of low optical feedback dynamics which occur in a region below that for coherence collapse. The map of the complexity shows a strong dependence on the delay time used in the permutation entropy calculation. Short delay times, which sample information at the complete measurement bandwidth, produce maps with drastically different systematic variation in complexity throughout the coherence collapse region, compared to maps generated with a delay time that matches the optical feedback delay. Evaluating the complexity with a permutation entropy delay equal to the external cavity delay produces results consistent with the notion of weak/strong chaos, as well as categorizing the dynamics as being of high complexity where the external cavity delay time is harder to identify. These are both desirable features for secure communication applications. The results also show permutation entropy as a function of delay time can be used to detect key frequencies driving the dynamics, including any that may exist due to, or arise from, technicalities of device fabrication and/or noise. A more complete insight into complexity as measured by permutation entropy is gained by considering multiple delay times.
RESUMO
Automated protocols have been developed to characterize time series data in terms of stability. These techniques are applied to the output power time series of an optically injected vertical cavity surface emitting laser (VCSEL) subject to varying injection strength and optical frequency detuning between master and slave lasers. Dynamic maps, generated from high resolution, computer controlled experiments, identify regions of dynamic instability in the parameter space.
Assuntos
Lasers , Desenho de Equipamento , Análise de Falha de Equipamento , Dinâmica não Linear , Espalhamento de RadiaçãoRESUMO
Microspheres made from optical glasses such as silica and chalcogenide are used as both passive and active optical elements in micro-optics systems and devices. The homogeneity of the microspheres is crucial to their optical quality and performance in such devices and so it is essential, in optimizing such systems, that techniques with nanometer scale resolution are developed to measure the internal structure and homogeneity of such spheres. In this work an analytical protocol based on focussed ion beam milling, combined with secondary ion and secondary electron imaging, has been developed to study the internal homogeneity of glass microspheres. The results have shown that silica microspheres with diameters of three to five microns, fabricated by a sol-gel method, have internal inhomogeneities and voids that will lead to non-uniform optical properties. The FIB milling and imaging technique developed has been found to be a very useful method of studying such inhomogeneities, which have been proposed, but never previously observed, in glass microspheres. The FIB based technique has also been used on larger chalcogenide glass (Ga(2)S(3):La(2)S(3)) microspheres (diameter of order 70 microns) but no inhomogeneities have been observed at the spatial resolution of a few microns so far achieved for these larger microspheres. This study suggests that the FIB based milling and imaging technique may have potential for quantitative use in the measurement of morphological variations in such systems as well as in the study of aging processes in micron-sized glass spheres.
RESUMO
An optically injected solid state laser (OISSL) system is known to generate complex nonlinear dynamics within the parameter space of varying the injection strength of the master laser and the frequency detuning between the master and slave lasers. Here we show that within these complex nonlinear dynamics, a system which can be operated as a source of laser pulses with a pulse repetition frequency (prf) that can be continuously varied by a single control, is embedded. Generation of pulse repetition frequencies ranging from 200 kHz up to 4 MHz is shown to be achievable for an optically injected Nd:YVO4 solid state laser system from analysis of prior experimental and simulation results. Generalizing this to other optically injected solid state laser systems, the upper bound on the repetition frequency is of order the relaxation oscillation frequency for the lasers. The system is discussed in the context of prf versatile laser systems more generally. Proposals are made for the next generation of OISSLs that will increase understanding of the variable pulse repetition frequency operation, and determine its practical limitations. Such variable prf laser systems; both low powered, and, higher powered systems achieved using one or more optical power amplifier stages; have many potential applications from interrogating resonance behaviors in microscale structures, through sensing and diagnostics, to laser processing.
Assuntos
Lasers de Estado Sólido , Processamento de Sinais Assistido por Computador/instrumentação , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
A technique for measuring the refractive index of micron sized fibers using a series of immersion index matching oils, and image contrast measurements is proposed and demonstrated. It has been applied to radial silks of the orb web weaving spider Plebs eburnus. These have widths of ~1-2 microns. Values about 1.5500 are obtained, with birefringence values between 0.0000 and 0.0133 for individual silks. An uncertainty in the range ± 5 × 10(-4) to ± 2 × 10(-3) is achieved for these challenging samples. This accuracy is about a twenty times improvement on previously reported measurements for spider silks using other techniques. The technique is used to obtain measurements of the refractive index of spider silks as a function of wavelength, for the first time. An Abbe number for the radial silks of Plebs eburnus of ~32 is found.
Assuntos
Imersão , Refratometria/métodos , Seda/química , Aranhas , AnimaisRESUMO
The nonlinear dynamics of two semiconductor laser systems: (i) with optical feedback, and (ii) with optical feedback and direct current modulation are evaluated from multi-GHz-bandwidth output power time-series. Animations of compilations of the RF spectrum (from the FFT of the time-series) as a function of optical feedback level, injection current and modulation signal strength is demonstrated as a new tool to give insight into the dynamics. The results are contrasted with prior art and new observations include fine structure in the RF spectrum at low levels of optical feedback and non-stationary switching between periodic and chaotic dynamics for some sets of laser system parameters. Correlation dimension analysis successfully identifies periodic dynamics but most of the dynamical states are too complex to be extracted using standard algorithms.
Assuntos
Lasers Semicondutores , Luz , Dinâmica não Linear , Processamento de Sinais Assistido por Computador/instrumentação , Algoritmos , Desenho de Equipamento , RetroalimentaçãoRESUMO
A hybrid electronic/optical system for synchronizing a chaotic receiver to a chaotic transmitter has been demonstrated. The chaotic signal is generated electronically and injected, in addition to a constant bias current, to a semiconductor laser to produce an optical carrier for transmission. The optical chaotic carrier is photodetected to regenerate an electronic signal for synchronization in a matched electronic receiver The system has been successfully used for the transmission and recovery of a chaos masked message that is added to the chaotic optical carrier. Past demonstrations of synchronized chaos based, secure communication systems have used either an electronic chaotic carrier or an optical chaotic carrier (such as the chaotic output of various nonlinear laser systems). This is the first electronic/optical hybrid system to be demonstrated. We call this generation of a chaotic optical carrier by electronic injection.
Assuntos
Eletrônica/instrumentação , Tecnologia de Fibra Óptica/instrumentação , Dispositivos Ópticos , Processamento de Sinais Assistido por Computador/instrumentação , Telecomunicações/instrumentação , Desenho Assistido por Computador , Desenho de Equipamento , Análise de Falha de Equipamento , Dinâmica não Linear , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , Integração de SistemasRESUMO
Nonlinear lasers are excellent systems from which to obtain high signal-to-noise experimental data of nonlinear dynamical variables to be used to develop and demonstrate robust nonlinear dynamics analysis techniques. Here we investigate the dynamical complexity of such a system: an optically injected Nd:YVO(4) solid state laser. We show that a map of the correlation dimension as a function of the injection strength and frequency detuning, extracted from the laser output power time-series data, is an excellent mirror of the dynamics map generated from a theoretical model of the system. An automated computational protocol has been designed and implemented to achieve this. The correlation dimension map is also contrasted with prior research that mapped the peak intensity of the output power as an experimentally accessible measurand reflecting the dynamical state of the system [Valling et al., Phys. Rev. A 72, 033810 (2005)].
Assuntos
Algoritmos , Análise de Falha de Equipamento/métodos , Lasers de Estado Sólido , Desenho Assistido por Computador , Desenho de Equipamento , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
Eleven nonsmoking male resting subjects were exposed to two transient CO profiles to examine whether the resultant carboxyhemoglobin (HbCO) differs with CO concentration for a fixed total CO dose and to determine the predictive capability of the theoretical model of Coburn et al. (J. Clin. Invest. 44: 1899-1910, 1965) using measured alveolar ventilation. One profile consisted of five sequential exposures to 1,500 ppm CO for 5 min each and spaced 3 min apart. The other consisted of five sequential exposures to 7,500 ppm CO for 1 min each and spaced 7 min apart. The subjects, therefore, were exposed to the same overall nominal dose of 37,500 ppm.min. During the experiment, the subject's ventilatory functions and respiratory gases were recorded continuously, and the resultant HbCO% was measured in venous blood samples by gas chromatography. Mean increase (+/- SD) in HbCO% per exposure was 2.08 +/- 0.27% for the 1,500 ppm CO exposures and 2.05 +/- 0.29% for the 7,500 ppm CO exposures with no significant difference between the two. When the measured values of the subject's alveolar ventilation were applied to the theoretical model of Coburn et al., the predicted rate of HbCO% formation was found to agree with the experimental results.
Assuntos
Monóxido de Carbono/farmacologia , Carboxihemoglobina/metabolismo , Adulto , Humanos , Masculino , Modelos Biológicos , Alvéolos Pulmonares/fisiologia , Capacidade de Difusão Pulmonar , Respiração , DescansoRESUMO
The purpose of this study was to test the CFK equation for its prediction of the rate of formation of carboxyhemoglobin (HbCO) in exercising humans by use of measured values of the respiratory variables and to characterize the rate of appearance of HbCO with frequent blood sampling. Ten nonsmoking male subjects were exposed to carbon monoxide (CO) on two separate occasions distinguished by the level of activity. Steady-state exercise was conducted on a cycle ergometer at either a low (approximately 45 W) or moderate (approximately 90 W) power output. Each experiment began with an exposure of 3,000 ppm CO for 3 min during a rest period followed by three intermittent exposures ranging from 3,000 ppm CO for 1 min at low exercise to 667 ppm CO for 3 min at moderate exercise. Increases in HbCO were normalized against predicted values to account for individual differences in the variables that govern CO uptake. No difference in the normalized uptake of CO was found between the low- and moderate-exercise trials. However, the CFK equation underpredicted the increase in HbCO for the exposures at rest and the first exposure at exercise, whereas it overpredicted for the latter two exposures at exercise. The net increase in HbCO after all exposures (approximately 10% HbCO) deviated by less than 1% HbCO between the measured and predicted values. The rate of appearance of HbCO fits a sigmoidal shape with considerable overshoot at the end of exposure. This can be explained by delays in the delivery of CO to the blood sampling point (dorsal hand vein) and by a relatively small blood circulation time compared with other regions of the body. A simple circulation model is used to demonstrate the overshoot phenomenon.
Assuntos
Monóxido de Carbono , Carboxihemoglobina/biossíntese , Exercício Físico/fisiologia , Adulto , Tempo de Circulação Sanguínea , Intoxicação por Monóxido de Carbono/sangue , Humanos , Cinética , Masculino , Modelos BiológicosRESUMO
Much spider silk research to date has focused on its mechanical properties. However, the webs of many orb-web spiders have evolved for over 136 million years to evade visual detection by insect prey. It is therefore a photonic device in addition to being a mechanical device. Herein we use optical surface profiling of capture silks from the webs of adult female St Andrews cross spiders (Argiope keyserlingi) to successfully measure the geometry of adhesive silk droplets and to show a bowing in the aqueous layer on the spider capture silk between adhesive droplets. Optical surface profiling shows geometric features of the capture silk that have not been previously measured and contributes to understanding the links between the physical form and biological function. The research also demonstrates non-standard use of an optical surface profiler to measure the maximum width of a transparent micro-sized droplet (microlens).
Assuntos
Seda/ultraestrutura , Algoritmos , Animais , Artefatos , Feminino , Óptica e Fotônica , Aranhas , Propriedades de SuperfícieRESUMO
Chaos data analysis has been performed on the chaotic output power time series data from a synchronized transmitter-receiver pair of semiconductor lasers. The system uses an asymmetric, bidirectional coupling configuration between the master (transmitter), which is a laser diode with optical feedback, and a stand-alone slave semiconductor laser. The correlation dimension of the chaotic time series has a minimum value of 4, which was obtained from high-bandwidth measurements. The correlation dimensions for both the master and the synchronized slave are identical when the cross-correlation coefficient of the synchronized chaos is above 0.9. These results establish correlation dimension analysis as an effective tool for the determination of the quality of wideband chaos synchronization.
RESUMO
Presented in this article is a brief overview of cranial anatomy and physiology, highlights of surgical indications, and the surgical procedure for craniotomy. Nursing interventions and their rationales are emphasized.
Assuntos
Craniotomia/enfermagem , Enfermagem Perioperatória/métodos , Cuidados Pós-Operatórios/métodos , Sala de Recuperação , Humanos , Exame Neurológico , Planejamento de Assistência ao PacienteRESUMO
Presented in this article is a brief overview of cranial anatomy and pathophysiology. Highlights of preoperative signs and symptoms and three surgical procedures performed on acoustic neuroma patients are discussed. Postoperative complications and nursing interventions are emphasized.
Assuntos
Neuroma Acústico/cirurgia , Enfermagem em Pós-Anestésico , Cuidados Pós-Operatórios , Encéfalo/anatomia & histologia , Ângulo Cerebelopontino/cirurgia , HumanosRESUMO
Comprehensive calculations of the cavity mode size throughout a Ti:sapphire laser, made with the ABCD Gaussian beam formalism are reported. These calculations show that the beam is not collimated, in general, in what are normally referred to as the collimated arms of the laser cavity. Additionally, the mode size and volume (in the gain medium) of the argon-ion laser, which is used to pump the Ti:sapphire laser optically, are evaluated for different focusing geometries, and graphs that can be used to select suitable mode-matching optics are produced. It is concluded that an appropriate strategy for mode matching the pump beam to the Ti:sapphire laser mode is to use a zoom telescope to tailor the collimated pump-laser beam diameter to an optimum value. Finally, comparisons of the pump-laser mode and the Ti:sapphire laser mode are presented for selected pumping geometries.
RESUMO
The cleaning action of the cleaning arc of two optical-fiber fusion-splicing devices is investigated. Interferometric analysis of the optical-fiber endfaces before and after exposure to the cleaning arcs reveals damage to the endfaces caused by one of the devices. The position of the fiber relative to the cleaning arc is thought to cause this damage.
RESUMO
Comparative operating characteristics of external-cavity diode lasers (ECDL's) with either a channel substrate planar device or a multi-quantum-well (MQW) device are presented. These include the output beam profile, which is significantly altered depending on the collimating lens used (either multielement or graded index), power versus injection-current characteristics, and the optical frequency and the rf spectra. The coherence lengths of the different laser diode-collimating-lens combinations in the ECDL are measured, and a new method for calculating the coupling coefficient and the coupled values of the internal quantum efficiency and the internal lumped loss is demonstrated for the MQW device.
RESUMO
The output beam profile of a laser diode with weak-to-moderate levels of optical feedback is shown to arise from interference of the emitted and feedback fields. This has been determined from a series of experiments, that measure the output spatial beam profile as the optical feedback field into the laser diode is spatially manipulated. Tilting, focusing, and aperturing the feedback field led to output beam profiles readily interpreted as the interference between the emitted and the feedback fields, provided the output of the laser-diode system with optical feedback has sufficient temporal coherence. Observation of the interference pattern in the spatial beam profile, at an appropriate level of optical feedback, can be used to study the relative wave front of the optical feedback and emitted fields and to estimate coupling coefficients.
RESUMO
A new method of Doppler-free two-photon spectroscopy has been developed in which a frequency-modulated (FM) dye laser is used to perform high-resolution spectroscopy. This provides an ideal method of locking a broadband FM laser to a narrow atomic or molecular reference line, a necessary step in using the FM laser for optical-frequency metrology. The method may also be used to test how closely the FM dye laser approaches a pure FM oscillation.