Picometer-Scale Atomic Shifts Governing Subdisordered Structures in Diamond.

Diamond is considered the most promising next-generation semiconductor material due to its excellent physical characteristics. It has been more than three decades since the discovery of a special structure named n-diamond. However, despite extensive efforts, its crystallographic structure and properties are still unclear. Here, we show that subdisordered structures in diamond provide an explanation for the structural feature of n-diamond. Monocrystalline diamond with subdisordered structures is synthesized via the chemical vapor deposition method. Atomic-resolution scanning transmission electron microscopy characterizations combined with the picometer-precision peak finder technology and diffraction simulations reveal that picometer-scale shifts of atoms within cells of diamond govern the subdisordered structures. First-principles calculations indicate that the bandgap of diamond decreases rapidly with increasing shifting distance, in accordance with experimental results. These findings clarify the crystallographic structure and electronic properties of n-diamond and provide new insights into the bandgap adjustment in diamond.

Enhanced Long-Term Corrosion Resistance of 316L Stainless Steel by Multilayer Amorphous Carbon Coatings.

Diamond-like carbon (DLC) coatings are effective in protecting the key components of marine equipment and can greatly improve their short-term performance (1.5~4.5 h). However, the lack of investigation into their long-term (more than 200 h) performance cannot meet the service life requirements of marine equipment. Here, three multilayered DLC coatings, namely Ti/DLC, TiCx/DLC, and Ti-TiCx/DLC, were prepared, and their long-term corrosion resistance was investigated. Results showed that the corrosion current density of all DLC coatings was reduced by 1-2 orders of magnitude compared with bare 316L stainless steel (316Lss). Moreover, under long-term (63 days) immersion in a 3.5 wt.% NaCl solution, all DLC coatings could provide excellent long-term corrosion protection for 316Lss, and Ti-TiCx/DLC depicted the best corrosion resistance; the polarization resistances remained at ~3.0 × 107 Ω·cm2 after immersion for 63 days, with more interfaces to hinder the penetration of the corrosive media. Meanwhile, during neutral salt spray (3000 h), the corrosion resistance of Ti/DLC and TiCx/DLC coatings showed a certain degree of improvement because the insoluble corrosion products at the defects blocked the subsequent corrosion. This study can provide a route to designing amorphous carbon protective coatings for long-term marine applications in different environments.

Ultra-Large Compressive Plasticity of E-Ga2 O3 Thin Films at the Submicron Scale.

Gallium oxide (Ga2 O3 ) usually fractures in the brittle form, and achieving large plastic deformability to avoid catastrophic failure is in high demand. Here, ε-Ga2 O3 thin films with columnar crystals and partial unoccupied Ga sites are synthesized, and it is demonstrated that the ε-Ga2 O3 at the submicron scale can be compressed to an ultra-large plastic strain of 48.5% without cracking. The compressive behavior and related mechanisms are investigated by in situ transmission electron microscope nanomechanical testing combined with atomic-resolution characterizations. The serrated plastic flow and large strain burst are two major deformation forms of ε-Ga2 O3 during compression, which are attributed to the dislocation nucleation and avalanches, formation of new grains, and amorphization. The ultra-large compressive plasticity of ε-Ga2 O3 thin films at the submicron scale can inspire new applications of Ga2 O3 in micro- or nano- electronic and optoelectronic devices, especially those that require impact resistance during processing or service.

Enhanced Tribocorrosion Performance of Cr/GLC Multilayered Films for Marine Protective Application.

The corrosion and tribology are all closely related to the interface/surface of materials, which are extremely important for the mechanical components used in harsh marine environments. In this work, we fabricated Cr/graphite-like carbon (GLC) multilayered films with different modulation periods on the 316L stainless steels by direct current magnetron sputtering. Tribocorrosion tests in artificial seawater show that the tribocorrosion resistance of the Cr/GLC films is improved as the modulation period decreases from 1000 to 333 nm and then drastically drops with further decreasing to 250 nm. By taking a top-layer thickening strategy for the Cr/GLC film with 250 nm modulation period, the tribocorrosion performance is significantly enhanced. The corresponded mechanisms are discussed in terms of the film structure and electrochemical corrosion behavior.

Ab Initio Investigation on Cu/Cr Codoped Amorphous Carbon Nanocomposite Films with Giant Residual Stress Reduction.

Amorphous carbon films (a-C) codoped by two metal elements exhibit the desirable combination of tribological and mechanical properties for widely potential applications, but are also prone to catastrophic failure due to the inevitable residual compressive stress. Thus far, the residual stress reduction mechanism remains unclear due to the insufficient understanding of the structure from the atomic and electronic scale. In this paper, using ab initio calculations, we first designed a novel Cu/Cr codoped a-C film and demonstrated that compared with pure and Cu/Cr monodoped cases, the residual stress in Cu/Cr codoped a-C films could be reduced by 93.6% remarkably. Atomic bond structure analysis revealed that the addition of Cu and Cr impurities in amorphous carbon structure resulted in the critical and significant relaxation of distorted C-C bond lengths. On the other hand, electronic structure calculation indicated a weak bonding interaction between the Cr and C atoms, while the antibonding interaction was observed for the Cu-C bonds, which would play a pivot site for the release of strain energy. Those interactions combined with the structural evolution could account for the drastic residual stress reduction caused by Cu/Cr codoping. Our results provide the theoretical guidance and desirable strategy to design and fabricate a new nanocomposite a-C films with combined properties for renewed applications.