RESUMO
The valorization of sewage sludge by black soldier fly larvae (BSFL) has gained attentions for sewage sludge management since the sludge can be reduced securely as well as larval biomass can be used for biorefineries application. Nevertheless, the BSFL growth was impeded while assimilating nutrition from sewage sludge due to the presence of extracellular polymeric substances (EPS) that had entrapped the essential nutrients inside. Accordingly, the pre-treatment of sewage sludge via anaerobic digestion at different pH was employed in this work to rupture the EPS structure and release more nutrients for larval growth. The results showed that larvae fed with raw sewage sludge had attained the lowest final larval weight (2.05 ± 0.38 mg/larva) as opposed to batches fed with pre-treated sewage sludges. This was because the soluble carbohydrate (more than 6.81 ± 1.31 mg of glucose/g sewage sludge) in EPS was released after anaerobic pre-treatment, facilitating larval assimilation for growth. Furthermore, it was observed that further increasing of pH for sewage sludge pre-treatment had led to lower final larval weight gained due to the inhibitory effect stemming from ammonia production at higher pH. The anaerobic pre-treatment of sewage sludge being executed at pH 3 for 8 days had achieved the highest final larval weight at 7.34 ± 0.97 mg/larva. The still low quality of sewage sludges after the pre-treatment also offered benefit, where high sewage sludge reduction and waste reduction index were recorded due to the necessity of BSFL to consume more sewage sludge in compensating the nutrients destitution in sludge. Lastly, the possibility of predicting final larval weight was successfully materialized via a statistical model derived from the multiple linear regression method. The derived model incorporated the interactive parameters of anaerobic pre-treated pH and durations at various combinations could predict the final larval weight.
Assuntos
Dípteros , Esgotos , Anaerobiose , Animais , Matriz Extracelular de Substâncias Poliméricas , Larva , Esgotos/químicaRESUMO
The purpose of this research was to learn the formation of biomedical scaffold material from gelatin by using titanate (Na2Ti3O7), which is a newly synthesized derivative of titanium dioxide (TiO2) with gelatin. It was prepared by mixed several solutions and cross-linked molecules by heating and salt-leaching. The biomedical scaffold was formed, and its porosity depended on the size of the salt crystal. The mixture was designed by using a mixture design with three factors: gelatin, titanate, and deionized water to determine the optimal mixture for the tensile strength of the biomedical scaffold. The microstructure of the biomedical scaffold was studied using scanning electron microscopy (SEM). The findings revealed that Na2Ti3O7 thoroughly pen-extracted the biomedical scaffold, and the tensile strength of the gelatin/titanate scaffold was higher than the biomedical scaffold, which was formed using pure gelatin. By using the mixture design technique, the 14.73% gelatin, 0.2% Na2Ti3O7, and 85.07% DI water got the highest yield of tensile strength (1508.15 kP). This was an about 4.88% increase in the tensile strength property when compared with using TiO2.
RESUMO
Being the second-largest country in the production of palm oil, Malaysia has a massive amount of palm kernel expeller (PKE) leftover. For that purpose, black soldier fly larvae (BSFL) are thus employed in this study to valorize the PKE waste. More specifically, this work elucidated the effects of the pre-fermentation of PKE via different amounts of Rhizopus oligosporus to enhance PKE palatability for the feeding of BSFL. The results showed that fermentation successfully enriched the raw PKE and thus contributed to the better growth of BSFL. BSFL grew to be 34% heavier at the optimum inoculum volume of 0.5 mL/10 g dry weight of PKE as compared to the control. Meanwhile, excessive fungal inoculum induced competition between BSFL and R. oligosporus, resulting in a reduction in BSFL weight. Under optimum feeding conditions, BSFL also registered the highest lipid yield (24.7%) and protein yield (44.5%). The biodiesel derived from BSFL lipid had also shown good compliance with the European biodiesel standard EN 14214. The high saturated fatty acid methyl esters (FAMEs) content (C12:0, C14:0, C16:0) in derived biodiesel made it highly oxidatively stable. Lastly, the superior degradation rate of PKE executed by BSFL further underpinned the sustainable conversion process in attaining valuable larval bioproducts.
RESUMO
This work aims to enhance the photocatalytic antibacterial performance of plastics according to the JIS Z 2801:2010 standard, and to determine their mechanical properties by studying: (i) the influence of calcination on titanium dioxide (TiO2); (ii) modification with different TiO2 concentrations, and; (iii) the effect of silane as a coupling agent. Acrylonitrile-butadiene-styrene plastics (ABS) and Escherichia coli (E. coli) were chosen as the model plastic and bacteria, respectively. The 500 °C calcined TiO2 successfully provided the best photoantibacterial activity, with an approximately 62% decrease of E. coli colony counts following 30 min of exposure. Heat treatment improved the crystallinity of anatase TiO2, resulting in low electron-hole recombination, while effectively adsorbing reactants on the surface. ABS with 500 °C-calcined TiO2 at the concentration of 1 wt % gave rise to the highest performance due to the improved distribution of TiO2. At this point, blending silane coupling agent could further improve the efficacy of photoantibacterial activity up to 75% due to greater interactions with the polymer matrix. Moreover, it could promote a 1.6-fold increase of yield strength via increased adherent bonding between TiO2 and the ABS matrix. Excellent photocatalytic and material stability can be achieved, with constant photocatalytic efficiency remaining for up to five reuse cycles without loss in the yield strength.
RESUMO
The increase of annual organic wastes generated worldwide has become a major problem for many countries since the mismanagement could bring about negative effects on the environment besides, being costly for an innocuous disposal. Recently, insect larvae have been investigated to valorize organic wastes. This entomoremediation approach is rising from the ability of the insect larvae to convert organic wastes into its biomass via assimilation process as catapulted by the natural demand to complete its lifecycle. Among the insect species, black soldier fly or Hermetia illucens is widely researched since the larvae can grow in various environments while being saprophagous in nature. Even though black soldier fly larvae (BSFL) can ingest various decay materials, some organic wastes such as sewage sludge or lignocellulosic wastes such as waste coconut endosperm are destitute of decent nutrients that could retard the BSFL growth. Hence, blending with nutrient-rich low-cost substrates such as palm kernel expeller, soybean curd residue, etc. is employed to fortify the nutritional contents of larval feeding substrates prior to administering to the BSFL. Alternatively, microbial fermentation can be adopted to breakdown the lignocellulosic wastes, exuding essential nutrients for growing BSFL. Upon reaching maturity, the BSFL can be harvested to serve as the protein and lipid feedstock. The larval protein can be made into insect meal for farmed animals, whilst the lipid source could be extracted and transesterified into larval biodiesel to cushion the global energy demands. Henceforth, this review presents the influence of various organic wastes introduced to feed BSFL, targeting to reduce wastes and producing biochemicals from mature larvae through entomoremediation. Modification of recalcitrant organic wastes via fermentation processes is also unveiled to ameliorate the BSFL growth. Lastly, the sustainable applications of harvested BSFL biomass are as well covered together with the immediate shortcomings that entail further researches.
Assuntos
Dípteros , Simuliidae , Animais , Biocombustíveis , Larva , Lipídeos , EsgotosRESUMO
The role titanate particle structure plays in governing its characteristics upon calcining and their ensuing influence on photocatalytic performance was investigated. Titanate nanotubes and nanoribbons were prepared by hydrothermal treatment of Aeroxide P25 and then calcined at temperatures in the range 200 - 800 °C. Heat treatment directly transformed the nanotubes to anatase while nanoribbon transformation to anatase occurred via a TiO(2)(B) intermediate phase. The nanoribbon structure also provided an increased resistance to sintering, allowing for retention of the original {010} facet of the titanate nanosheets up to 800 °C. The changing material properties with calcining were found to influence the capacity of the particles to photodegrade oxalic acid and methanol. The nanotubes provided an optimum photoactivity following calcination at 500 °C with this point representing a transition between the relative dominance of crystal phase and surface area on performance. The comparatively smaller initial surface area of the nanoribbons consigned this characteristic to a secondary role in influencing photoactivity with the changes to crystal phase dominating the continually improving performance with calcination up to 800 °C. The structural stability imparted by the nanoribbon architecture during calcination, in particular its retention of the {010} facet at temperatures >700 °C, advanced its photocatalytic performance compared with the nanotubes. This was especially the case for methanol photooxidation whose primary degradation mechanism relies on hydroxyl radical attack and was facilitated by the {010} facet. The effect was not as pronounced for oxalic acid due to its higher adsorption on TiO(2) and therefore greater susceptibility to oxidation by photogenerated holes. This study demonstrates that, apart from modulating sintering effects and changes to crystal phase, the titanate nanostructure influences particle crystallography which can be beneficial for photocatalytic performance.