Local Environments Created by the Ligand Coating of Nanoparticles and Their Implications for Sensing and Surface Reactions.

ConspectusThe ligand shells of colloidal nanoparticles (NPs) can serve different purposes. In general, they provide colloidal stability by introducing steric repulsion between NPs. In the context of biological applications, the ligand shell plays a critical role in targeting, enabling NPs to achieve specific biodistributions. However, there is also another important feature of the ligand shell of NPs, namely, the creation of a local environment differing from the bulk of the solvent in which the NPs are dispersed. It is known that charged ligand shells can attract or repel ions and change the effective charge of a NP through Debye-Hückel screening. Positively charged ions, such as H+ (or H3O+) are attracted to negatively charged surfaces, whereas negatively charged ions, such as Cl- are repelled. The distribution of the ions around charged NP surfaces is a radial function of distance from the center of the NP, which is governed by a balance of electrostatic forces and entropy of ions and ligands. As a result, the ion concentration at the NP surface is different from its bulk equilibrium concentration, i.e., the charged ligand shell around the NPs has formed a distinct local environment. This not only applies to charged ligand shells but also follows a more general principle of induced condensation and depletion. Polar/apolar ligand shells, for example, result in a locally increased concentration of polar/apolar molecules. Similar effects can be seen for biocatalysts like enzymes immobilized in nanoporous host structures, which provide a special environment due to their surface chemistry and geometrical nanoconfinement. The formation of a local environment close to the ligand shell of NPs has profound implications for NP sensing applications. As a result, analyte concentrations close to the ligand shell, which are the ones that are measured, may be very different from the analyte concentrations in bulk. Based on previous work describing this effect, it will be discussed herein how such local environments, created by the choice of used ligands, may allow for tailoring the NPs' sensing properties. In general, the ligand shell around NPs can be attractive/repulsive for molecules with distinct properties and thus forms an environment that can modulate the specific response. Such local environments can also be optimized to modulate chemical reactions close to the NP surface (for example, by size filtering within pores) or to attract specific low abundance proteins. The importance hereby is that this is based on interaction with low selectivity between the ligands and the target molecules.

Encapsulation of Nanoparticles with Statistical Copolymers with Different Surface Charges and Analysis of Their Interactions with Proteins and Cells.

Encapsulation with polymers is a well-known strategy to stabilize and functionalize nanomaterials and tune their physicochemical properties. Amphiphilic copolymers are promising in this context, but their structural diversity and complexity also make understanding and predicting their behavior challenging. This is particularly the case in complex media which are relevant for intended applications in medicine and nanobiotechnology. Here, we studied the encapsulation of gold nanoparticles and quantum dots with amphiphilic copolymers differing in their charge and molecular structure. Protein adsorption to the nanoconjugates was studied with fluorescence correlation spectroscopy, and their surface activity was studied with dynamic interfacial tensiometry. Encapsulation of the nanoparticles without affecting their characteristic properties was possible with all tested polymers and provided good stabilization. However, the interaction with proteins and cells significantly depended on structural details. We identified statistical copolymers providing strongly reduced protein adsorption and low unspecific cellular uptake. Interestingly, different zwitterionic amphiphilic copolymers showed substantial differences in their resulting bio-repulsive properties. Among the polymers tested herein, statistical copolymers with sulfobetaine and phosphatidylcholine sidechains performed better than copolymers with carboxylic acid- and dimethylamino-terminated sidechains.

Joining Two Natural Motifs: Catechol-Containing Poly(phosphoester)s.

Numerous catechol-containing polymers, including biodegradable polymers, are currently heavily discussed for modern biomaterials. However, there is no report combining poly(phosphoester)s (PPEs) with catechols. Adhesive PPEs have been prepared via acyclic diene metathesis polymerization. A novel acetal-protected catechol phosphate monomer was homo- and copolymerized with phosphoester comonomers with molecular weights up to 42000 g/mol. Quantitative release of the catechols was achieved by careful hydrolysis of the acetal groups without backbone degradation. Degradation of the PPEs under basic conditions revealed complete and statistical degradation of the phosphotri- to phosphodiesters. In addition, a phosphodiester monomer with an adhesive P-OH group and no protective group chemistry was used to compare the binding to metal oxides with the multicatechol-PPEs. All PPEs can stabilize magnetite particles (NPs) in polar solvents, for example, methanol, due to the binding of the phosphoester groups in the backbone to the particles. ITC measurements reveal that multicatechol PPEs exhibit a higher binding affinity to magnetite NPs compared to PPEs bearing phosphodi- or phosphotriesters as repeating units. In addition, the catechol-containing PPEs were used to generate organo- and hydrogels by oxidative cross-linking, due to cohesive properties of catechol groups. This unique combination of two natural adhesive motives, catechols and phosphates, will allow the design of novel future gels for tissue engineering applications or novel degradable adhesives.

Triblock Terpolymers by Simultaneous Tandem Block Polymerization (STBP).

A route of synthesizing triblock terpolymers in a one-pot, "one-step" polymerization approach is presented. The combination of two distinct polymerization techniques through orthogonal catalyst/initiator functionalities attached to a polymeric linker furnishes novel pathways to ABC-terpolymers. Both polymerizations have to be compatible regarding mechanisms, chosen monomers, and solvents. Here, an α,ω-heterobifunctional poly(ethylene glycol) serves as poly-meric catalyst/initiator to obtain triblock terpolymers of poly(norbornene)-b-poly(ethylene glycol)-b-poly(L-lactic acid) PNB-PEG-PLLA via simultaneous ring opening metathesis poly-merization and ring opening polymerization in a fast one-pot polymerization. Structural characterization of the polymers is provided via (1)H-, DOSY-, and (1)H,(1)H-COSY-NMR, while solution and thin film self-assembly are investigated by dynamic light scattering and atomic force microscopy.

Spherical Polyolefin Particles from Olefin Polymerization in the Confined Geometry of Porous Hollow Silica Particles.

Porous hollow silica particles (HSPs) are presented as new templates to control the product morphology in metallocene-catalyzed olefin polymerization. By selectively immobilizing catalysts inside the micrometer-sized porous hollow silica particles, the high hydraulic forces resulting from polymer growth within the confined geometries of the HSPs cause its supporting shell to break up from the inside. As the shape of the support is replicated during olefin polymerization, perfectly spherical product particles with very narrow size distribution can be achieved by using HSPs exhibiting a monomodal size distribution. Furthermore, the size of the obtained product particles can be controlled not only by the polymerization time but also by the size of the support material.

Direct observation of drops on slippery lubricant-infused surfaces.

For a liquid droplet to slide down a solid planar surface, the surface usually has to be tilted above a critical angle of approximately 10°. By contrast, droplets of nearly any liquid "slip" on lubricant-infused textured surfaces - so termed slippery surfaces - when tilted by only a few degrees. The mechanism of how the lubricant alters the static and dynamic properties of the drop remains elusive because the drop-lubricant interface is hidden. Here, we image the shape of drops on lubricant-infused surfaces by laser scanning confocal microscopy. The contact angle of the drop-lubricant interface with the substrate exceeds 140°, although macroscopic contour images suggest angles as low as 60°. Confocal microscopy of moving drops reveals fundamentally different processes at the front and rear. Drops recede via discrete depinning events from surface protrusions at a defined receding contact angle, whereas the advancing contact angle is 180°. Drops slide easily, as the apparent contact angles with the substrate are high and the drop-lubricant interfacial tension is typically lower than the drop-air interfacial tension. Slippery surfaces resemble superhydrophobic surfaces with two main differences: drops on a slippery surface are surrounded by a wetting ridge of adjustable height and the air underneath the drop in the case of a superhydrophobic surface is replaced by lubricant in the case of a slippery surface.

Poly(isobutylene) nanoparticles via cationic polymerization in nonaqueous emulsions.

The preparation of poly(isobutylene) (PIB) nanoparticles via cationic emulsion polymerization is presented. As a requirement, an oil-in-perfluoroalkane nonaqueous emulsion is developed, which is inert under the carbocationic polymerization conditions. To stabilize the dichloromethane/hexane droplets in the fluorinated, continuous phase, an amphiphilic block copolymer emulsifier is prepared containing PIB and 1H,1H-perfluoroalkylated poly(pentafluorostyrene) blocks. This system allows for the polymerization of isobutylene with number-average molecular weights (Mn) up to 27,000 g mol(-1). The particle morphologies are characterized via dynamic light scattering and electron microscopy. For Mn > 20,000 g mol(-1), the particles exhibit shape-persistence at room temperature and are ≈100 nm in diameter.

Tuning polarity of polyphenylene dendrimers by patched surface amphiphilicity--precise control over size, shape, and polarity.

In the ideal case, a precise synthesis yields molecules with a constitutional as well as a conformational perfectness. Such a case of precision is demonstrated by the synthesis of semi-rigid amphiphilic polyphenylene dendrimers (PPDs). Polar sulfonate groups are precisely placed on their periphery in such a manner that patches of polar and non-polar regions are created. Key structural features are the semi-rigid framework and shape-persistent nature of PPDs since the limited flexibility introduces a nano-phase-separated amphiphilic rim of the dendrimer. This results in both attractive and repulsive interactions with a given solvent. Frustrated solvent structures then lead to a remarkable solubility in solvents of different polarity such as toluene, methanol, and water or their mixtures. Water solubility combined with defined surface structuring and variable hydrophobicity of PPDs that resemble the delicate surface textures of proteins are important prerequisites for their biological and medical applications based upon cellular internalization.

Biocompatible polylactide-block-polypeptide-block-polylactide nanocarrier.

Polypeptides are successfully incorporated into poly(l-lactide) (PLLA) chains in a ring-opening polymerization (ROP) of l-lactide by using them as initiators. The resulting ABA triblock copolymers possess molecular weights up to 11000 g·mol(-1) and polydispersities as low as 1.13, indicating the living character of the polymerization process. In a nonaqueous emulsion, peptide-initiated polymerization of l-lactide leads to well-defined nanoparticles, consisting of PLLA-block-peptide-block-PLLA copolymer. These nanoparticles are easily loaded by dye-encapsulation and transferred into aqueous media without aggregation (average diameter of 100 nm) or significant dye leakage. Finally, internalization of PLLA-block-peptide-block-PLLA nanoparticles by HeLa cells is demonstrated by a combination of coherent anti-Stokes Raman spectroscopy (CARS) and fluorescence microscopy. This demonstrates the promise of their utilization as cargo delivery vehicles.

Solvent-free synthesis of microparticles on superamphiphobic surfaces.

Polymeric and composite microspheres can be synthesized without solvents or process liquids by using superamphiphobic surfaces. In this method, the repellency of superamphiphobic layers to monomers and polymer melts and the extremely low adhesion to particles are taken advantage of.

Synthesis, electrochemical properties and self-assembly of a proton-conducting core-shell macromolecule.

Let the protons flow: The synthesis of a core-shell macromolecule bearing phosphonic acids is presented. The rigid central core serves as a scaffold to stabilize the flexible polymer shells. Pronounced proton conductivity is obtained under humidified conditions. The self-assembly of such dendritic macromolecules by electrostatic interactions on a modified gold substrate is investigated and characterized.

Molecularly imprinted nanospheres by nonaqueous emulsion polymerization.

The preparation of nanosized, molecularly imprinted polymer particles by nonaqueous emulsion polymerization is presented. Monodisperse cross-linked polymer nanospheres with a diameter of around 100 nm were synthesized using a standard monomer mixture of methacrylic acid and ethylene dimethacrylate, containing (±)-propranolol as a template. The rebinding efficiency of the resulting particles was determined by batch rebinding tests and isothermal titration calorimetry (ITC). The results indicate that the proposed imprinting process under nonaqueous conditions lead to particles with an enhanced capacity of template rebinding compared to both nonimprinted ones and to particles obtained by more conventional emulsion polymerization in water.

Oil-in-oil emulsions: a unique tool for the formation of polymer nanoparticles.

Polymer latex particles are nanofunctional materials with widespread applications including electronics, pharmaceuticals, photonics, cosmetics, and coatings. These materials are typically prepared using waterborne heterogeneous systems such as emulsion, miniemulsion, and suspension polymerization. However, all of these processes are limited to water-stable catalysts and monomers mainly polymerizable via radical polymerization. In this Account, we describe a method to overcome this limitation: nonaqueous emulsions can serve as a versatile tool for the synthesis of new types of polymer nanoparticles. To form these emulsions, we first needed to find two nonmiscible nonpolar/polar aprotic organic solvents. We used solvent mixtures of either DMF or acetonitrile in alkanes and carefully designed amphiphilic block and statistical copolymers, such as polyisoprene- b-poly(methyl methacrylate) (PI- b-PMMA), as additives to stabilize these emulsions. Unlike aqueous emulsions, these new emulsion systems allowed the use of water-sensitive monomers and catalysts. Although polyaddition and polycondensation reactions usually lead to a large number of side products and only to oligomers in the aqueous phase, these new conditions resulted in high-molecular-weight, defect-free polymers. Furthermore, conducting nanoparticles were produced by the iron(III)-induced synthesis of poly(ethylenedioxythiophene) (PEDOT) in an emulsion of acetonitrile in cyclohexane. Because metallocenes are sensitive to nitrile and carbonyl groups, the acetonitrile and DMF emulsions were not suitable for carrying out metallocene-catalyzed olefin polymerization. Instead, we developed a second system, which consists of alkanes dispersed in perfluoroalkanes. In this case, we designed a new amphipolar polymeric emulsifier with fluorous and aliphatic side chains to stabilize the emulsions. Such heterogeneous mixtures facilitated the catalytic polymerization of ethylene or propylene to give spherical nanoparticles of high molecular weight polyolefins. These nonaqueous systems also allow for the combination of different polymerization techniques to obtain complex architectures such as core-shell structures. Previously, such structures primarily used vinylic monomers, which greatly limited the number of polymer combinations. We have demonstrated how nonaqueous emulsions allow the use of a broad variety of hydrolyzable monomers and sensitive catalysts to yield polyester, polyurethane, polyamide, conducting polymers, and polyolefin latex particles in one step under ambient reaction conditions. This nonpolar emulsion strategy dramatically increases the chemical palette of polymers that can form nanoparticles via emulsion polymerization.

Proton mobilities in phosphonic acid-based proton exchange membranes probed by 1H and 2H solid-state NMR spectroscopy.

Two novel phosphonic acid-based "dry" proton exchange membrane materials that may allow for fuel cell operation above 100 degrees C have been prepared and characterized via solid-state 1H and 2H MAS NMR spectroscopy. We obtained information on both the nature of hydrogen bonding and local proton mobilities among phosphonic acid moieties. In particular, 2H MAS NMR line shape analysis yielded apparent activation energies of the underlying motional processes. Using this approach, we have investigated both a model compound and a novel PEM system. It was found that the relation of estimated hydrogen-bond strength and local proton mobility accessible by solid-state NMR and bulk proton conductivity is complex. Improvements through admixture of a second component with protogenic groups are suggested.

Novel fluorescent core-shell nanocontainers for cell membrane transport.

The synthesis and characterization of novel core-shell macromolecules consisting of a fluorescent perylene-3,4,9,10-tetracarboxdiimide chromophore in the center surrounded by a hydrophobic polyphenylene shell as a first and a flexible hydrophilic polymer shell as a second layer was presented. Following this strategy, several macromolecules bearing varying polymer chain lengths, different polymer shell densities, and increasing numbers of positive and negative charges were achieved. Because all of these macromolecules reveal a good water solubility, their ability to cross cellular membranes was investigated. In this way, a qualitative relationship between the molecular architecture of these macromolecules and the biological response was established.

Dissecting common and divergent molecular pathways elicited by CdSe/ZnS quantum dots in freshwater and marine sentinel invertebrates.

Water ecosystems represent main targets of unintentional contamination of nanomaterials, due to industrial waste or other anthropogenic activities. Nanoparticle insult to living organisms may occur in a sequential way, first by chemical interactions of the material with the target membrane, then by progressive internalisation and interaction with cellular structures and organelles. These events trigger a signal transduction, through which cells modulate molecular pathway in order to respond and survive to the external elicitation. Therefore, the analysis of the global changes of the molecular machinery, possibly induced in an organism upon exposure to a given nanomaterial, may provide unique clues for proper and exhaustive risk assessment. Here, we tested the impact of core/shell CdSe/ZnS QDs coated by a positively charged polymer on two aquatic species, the polyp Hydra vulgaris and the coral S. pistillata, representative of freshwater and sea habitats, respectively. By using reliable approaches based on animal behaviour and physiology together with a whole transcriptomic profiling, we determined several toxicity endpoints. Despite the difference in the efficiency of uptake, both species were severely affected by QD treatment, resulting in dramatic morphological damages and tissue bleaching. Global transcriptional changes were also detected in both organisms, but presenting different temporal dynamics, suggesting both common and divergent functional responses in the two sentinel organisms. Due to the striking conservation of structure and genomic organisation among animals throughout evolution, our expression profiling offers new clues to identify novel molecular markers and pathways for comparative transcriptomics of nanotoxicity.

An autonomic self-healing organogel with a photo-mediated modulus.

A new method is described for fabricating autonomic, self-healing, deformable organogels. We combined imidazolium-based poly(ionic liquid) (PIL) and azobenzene-grafted poly(carboxylic acid) (PAA-Azo) in N,N-dimethyl formamide. Further, complexing PIL with unirradiated (trans) or irradiated (cis) PAA-Azo tuned the elastic modulus of the organogel.

Polycarbonate and polystyrene nanoplastic particles act as stressors to the innate immune system of fathead minnow (Pimephales promelas).

Water pollution with large-scale and small-scale plastic litter is an area of growing concern. Macro-plastic litter is a well-known threat to aquatic wildlife; however, the effects of micro-sized and nano-sized plastic particles on the health of organisms are not well understood. Small-scale plastic particles can easily be ingested by various aquatic organisms and potentially interfere with their immune system; therefore, the authors used a freshwater fish species as a model organism for nanoplastic exposure. Characterization of polystyrene (41.0 nm) and polycarbonate (158.7 nm) nanoplastic particles (PSNPs and PCNPs, respectively) in plasma was performed, and the effects of PSNPs and PCNPs on the innate immune system of fathead minnow were investigated. In vitro effects of PSNPs and PCNPs on neutrophil function were determined using a battery of neutrophil function assays. Exposure of neutrophils to PSNPs or PCNPs caused significant increases in degranulation of primary granules and neutrophil extracellular trap release compared to a nontreated control, whereas oxidative burst was less affected. The present study outlines the stress response of the cellular component of fish innate immune system to polystyrene and polycarbonate nanoparticles/aggregates and indicates their potential to interfere with disease resistance in fish populations. Environ Toxicol Chem 2016;35:3093-3100. © 2016 SETAC.

Evaluation of quantum dot cytotoxicity: interpretation of nanoparticle concentrations versus intracellular nanoparticle numbers.

While substantial progress has been achieved in the design of more biocompatible nanoparticles (NP), detailed data are required on the precise interactions of NPs and their environment for more reliable interpretation of toxicity results. Therefore, this study aims to investigate the interaction of two quantum dots (QDs) of the same core material CdSe/ZnS coated with two different amphiphilic polymers, with two well-established mammalian cell lines representing possible sites of QD accumulation. Results are linked to either extracellular QD concentrations (given dose) or cellular QD levels (number of internalized particles). In this study, QD internalization, effects on cellular homeostasis, and consequent inflammatory and cytoskeletal alterations caused by these QDs were explored. Fluorescence imaging techniques, including; image-based flow cytometry, confocal microscopy and high-content imaging with the InCell analyzer were used in a multiparametric methodology to evaluate cell viability, induction of oxidative stress, mitochondrial health, cell cytoskeletal functionality and changes in cellular morphology. Gene expression arrays were also carried out on 168 key genes involved in the cytoskeletal architecture and inflammatory pathway accompanied with the analysis of focal adhesions as key markers for actin-mediated signaling. Our results show distinct differences between the PMA and PTMAEMA-stat-PLMA coated QDs, which could mainly be attributed to differences in their cellular uptake levels. The toxicity profiles of both QD types changed drastically depending on whether effects were expressed in terms of given dose or internalized particles. Both QDs triggered alterations to important but different genes, most remarkably the up-regulation of tumor suppression and necrosis genes and the down regulation of angiogenesis and metastasis genes at sub-cytotoxic concentrations of these QDs.