Site environment type - The main factor of urban road dust toxicity?

The main objective of the study was to determine the effects of the water extracts of urban road dust (URD) samples on the growth inhibition and mortality rate of Heterocypris incongruens in various site environment type. We collected 24 samples of the road dust close to highways, main roads, crossroads as well as at other places i.e. residential area, and suburbs. We determined the selected metals (Al, As, Ba, Cd, Co, Cr, Cu, Ga, Mg, Mn, Mo, Ni, Pb, Rb, Sr, Ti, Tl, V and Zn) content of the water extracts of these samples as well as we tested the toxicity of the water extracts of URD samples using a commercial test Ostracodtoxkit F. We observed the lowest values of the growth inhibition of H. incongruens for residential areas and suburbs (<50%). The highest growth inhibition we found for water extracts of URD samples collected at the main roads in the Katowice urban area and crossroads in the urban areas. Although the mortality and growth inhibition of H. incongruens were related to the road traffic emissions it was impossible to clearly relate this finding with the urban site category.

In Vivo Validation of the BIANCA Biophysical Model: Benchmarking against Rat Spinal Cord RBE Data.

(1) Background: Cancer ion therapy is constantly growing thanks to its increased precision and, for heavy ions, its increased biological effectiveness (RBE) with respect to conventional photon therapy. The complex dependence of RBE on many factors demands biophysical modeling. Up to now, only the Local Effect Model (LEM), the Microdosimetric Kinetic Model (MKM), and the "mixed-beam" model are used in clinics. (2) Methods: In this work, the BIANCA biophysical model, after extensive benchmarking in vitro, was applied to develop a database predicting cell survival for different ions, energies, and doses. Following interface with the FLUKA Monte Carlo transport code, for the first time, BIANCA was benchmarked against in vivo data obtained by C-ion or proton irradiation of the rat spinal cord. The latter is a well-established model for CNS (central nervous system) late effects, which, in turn, are the main dose-limiting factors for head-and-neck tumors. Furthermore, these data have been considered to validate the LEM version applied in clinics. (3) Results: Although further benchmarking is desirable, the agreement between simulations and data suggests that BIANCA can predict RBE for C-ion or proton treatment of head-and-neck tumors. In particular, the agreement with proton data may be relevant if the current assumption of a constant proton RBE of 1.1 is revised. (4) Conclusions: This work provides the basis for future benchmarking against patient data, as well as the development of other databases for specific tumor types and/or normal tissues.

Mutagenicity of indoor air pollutants adsorbed on spider webs.

In this study, air pollutants were determined on spider webs collected from six indoor sites in the Lower Silesia region, southwest Poland. In order to assess the mutagenicity (M) of the collected samples, the standard Salmonella assay was used with two Salmonella typhimurium strains, TA98 and YG1041. The assays were conducted with and without metabolic activation (S9 mix). The presence of 15 polycyclic aromatic hydrocarbons (PAHs) and PAH-derivatives (nitro-PAHs; NPAHs) on spider webs was also assessed at the studied sites. The total PAH content of collected samples ranged from 1.65 to 51.75 µg g-1; the total NPAH content ranged from 0.22 to 2.44 µg g-1. The highest PAH concentration was found at two sites: a basement with coal heating (S4) and a garage (S6). Samples from these two sites were also characterized by the highest mutagenicity values in TA98 strain (65,127 and 35,565 revertants/g of web in the absence and presence of S9 mix, respectively, for S4 and 54,753 and 46,262 revertants/g, respectively, for S6). For strain YG1041, the highest values were obtained in a basement with coal heating; values were 233,748 and 185,321 revertants/g of web in the absence and presence of S9 mix, respectively. The concentration of PAHs was significantly correlated with the mutagenicity (M) of the web samples collected. Reassuming, people are exposed to substances with possible carcinogenic properties and potential adverse health effect through the ambient air due to vehicular traffic, heating systems, cooking habits etc. The application of spider webs sampling could bring the very important information regarding the possible health effect associated with indoor air, making these kind of studies cheap and reliable.

Inhalation Exposure to PM-Bound Polycyclic Aromatic Hydrocarbons Released from Barbecue Grills Powered by Gas, Lump Charcoal, and Charcoal Briquettes.

The present study seeks to define the possible cancer risk arising from the inhalation exposure to particle (PM)-bound polycyclic aromatic hydrocarbons (PAHs) present in barbecue emission gases and to compare the risk depending on the type of fuel used for grill powering. Three types of fuel were compared: liquid propane gas, lump charcoal, and charcoal briquettes. PM2.5 and PM2.5-100 were collected during grilling. Subsequently, 16 PAHs congeners were extracted from the PM samples and measured quantitatively using gas chromatography. The content of PM-bound PAHs was used to calculate PAHs deposition in the respiratory tract using the multiple path particle dosimetry model. Finally, a probabilistic risk model was developed to assess the incremental lifetime cancer risk (ILCR) faced by people exposed to PAHs. We found a distinctly greater PAHs formation in case of grills powered by charcoal briquettes. The summary concentration of PAHs (Σ16PAH) ranged from <0.002 µg/m3 (gas grill) to 21.52 µg/m3 (grill powered by briquettes). Daily exposure of a grill operator, while grilling meat, to PM2.5-bound PAHs, adjusted to benzo[a]pyrene toxicity equivalent (BaPeq), was 326.9, 401.6, and 0.04 ng/d for lump charcoal, charcoal briquettes, and gas powered grill, respectively. Exposure to PAHs emitted from charcoal briquettes was four orders of magnitude greater than that for gas grill. The ILCR followed a log-normal distribution, with a geometric mean of 8.38 × 10-5 for exposure to PM2.5-bound PAHs emitted from gas grills unloaded with food and as high as 8.68 × 10-1 for the grills loaded with food over charcoal briquettes. The estimated cancer risk for people who would inhale barbecue particles for 5 h a day, 40 days a year exceeds the acceptable level set by the U.S. Environmental Protection Agency. We conclude that the type of heat source used for grilling influences the PM-bound PAHs formation. The greatest concentration of PAHs is generated when grilling over charcoal briquettes. Loading grills with food generates conspicuously more PAHs emissions. Traditional grilling poses cancer risk much above the acceptable limit, as opposed to much less risk involving gas powered grills.

Health Risk Impacts of Exposure to Airborne Metals and Benzo(a)Pyrene during Episodes of High PM10 Concentrations in Poland.

OBJECTIVE: To check whether health risk impacts of exposure to airborne metals and Benzo(a) Pyrene during episodes of high PM10 concentrations lead to an increased number of lung cancer cases in Poland. METHODS: In this work, we gathered data from 2002 to 2014 concerning the ambient concentrations of PM10 and PM10-bound carcinogenic Benzo(a)pyrene [B(a)P] and As, Cd, Pb, and Ni. With the use of the criterion of the exceedance in the daily PM10 mass concentration on at least 50% of all the analyzed stations, the PM10 maxima's were selected. Lung cancer occurrences in periods with and without the episodes were further compared. RESULTS: During a 12-year period, 348 large-scale smog episodes occurred in Poland. A total of 307 of these episodes occurred in the winter season, which is characterized by increased emissions from residential heating. The occurrence of episodes significantly (P < 0.05) increased the concentrations of PM10-bound carcinogenic As, Cd, Pb, Ni, and B(a)P. During these events, a significant increase in the overall health risk from those PM10-related compounds was also observed. The highest probability of lung cancer occurrences was found in cities, and the smallest probability was found in the remaining areas outside the cities and agglomerations. CONCLUSION: The link between PM pollution and cancer risk in Poland is a serious public health threat that needs further investigation.

Submicron particle-bound polycyclic aromatic hydrocarbons in the Polish teaching rooms: Concentrations, origin and health hazard.

The goal of the work was to investigate the concentrations of the 16 US EPA priority polycyclic aromatic hydrocarbons (PAH) bound to submicrometer particles (particulate matter, PM1) suspended in the air of university teaching rooms and in the atmospheric air outside. Two teaching rooms were selected in two Polish cities, Gliwice, southern Poland, and Warsaw, central Poland, differing with regard to the ambient concentrations and major sources of PM and PAH. The variabilities of indoor and outdoor 24-hr concentrations of PM1-bound PAH, the ratio (I/O) of the indoor to outdoor 24-hr concentrations of PM1-bound PAH, probable sources of PAH and the level of the hazard from the mixture of the 16 PAH (ΣPAH) to humans at both sites were analyzed. In both Warsaw and Gliwice, the mean concentrations of PM1-bound ΣPAH were slightly higher in the atmospheric air than in the rooms. The indoor and outdoor concentrations of individual PAH in Gliwice were correlated, in Warsaw - they were not. Most probably, the lack of the correlations in Warsaw was due to the existence of an unidentified indoor source of gaseous PAH enriching PM1 in phenanthrene, fluorene, and pyrene. Although the ambient concentrations of PM1-bound PAH were low compared to the ones observed earlier at both sites, they were much higher than in other urbanized European areas. However, because of low mass share of heavy PAH in ΣPAH, the various indicators of the health hazard from the 16 PAH mixture were low compared to other regions.

Particulate Matter in the Air of the Underground Chamber Complex of the Wieliczka Salt Mine Health Resort.

This study evaluates the mass concentration and chemical composition of particulate matter (PM), collected in the chamber complex of the underground health resort located in the Wieliczka Salt Mine in southern Poland. Physical and chemical properties of PM were examined from the standpoint of their possible connection with therapeutic effects of the subterranean air in the mine. We found that in three underground spots we measured the average concentration of PM did not exceed 30 µg/m3. Chemical composition of PM was dominated by sodium chloride, making up 88 % of its mass, on average. It was shown that the underground ambient concentration of PM and its chemical composition depended mostly on the nature of the rock material present in the ventilation tunnel of the health resort, filtering the incoming air. The presence and effect of external sources of PM, including patients' activity, also had an impact on the underground PM concentration.

The size distribution and origin of elements bound to ambient particles: a case study of a Polish urban area.

Ambient particulate matter (PM) was sampled in Zabrze (southern Poland) in the heating period of 2009. It was investigated for distribution of its mass and of the masses of its 18 component elements (S, Cl, K, Ca, Cr, Mn, Fe, Ni, Cu, Zn, Ge, As, Br, Sr, Cd, Sb, Ba, and Pb) among 13 PM size fractions. In the paper, the distribution modality of and the correlations between the ambient concentrations of these elements are discussed and interpreted in terms of the source apportionment of PM emissions. By weight, S, Cl, K, Ca, Cr, Mn, Fe, Ni, Cu, Zn, Ge, As, Br, Sr, Cd, Sb, Ba, and Pb were 10% of coarse and 9% of ultrafine particles. The collective mass of these elements was no more than 3.5 % of the mass of the particles with the aerodynamic diameter D p between 0.4 and 1.0 µm (PM0.4₋1), whose ambient mass concentration was the highest. The PM mass size distribution for the sampling period is bimodal; it has the accumulation and coarse modes. The coarse particles were probably of the mineral/soil origin (characteristic elements: Ca, Fe, Sr, and Ba), being re-suspended polluted soil or road dust (characteristic elements: Ca, Fe, Sr, Ba, S, K, Cr, Cu, Zn, Br, Sb, Pb). The maxima of the density functions (modes) of the concentration distributions with respect to particle size of PM-bound S, Cl, K, Cu, Zn, Ge, Br, Cd, Sb, and Pb within the D p interval from 0.108 to 1.6 µm (accumulation PM particles) indicate the emissions from furnaces and road traffic. The distributions of PM-bound As, Mn, Ba, and Sr concentrations have their modes within D p ≤ 0.108 µm (nucleation PM particles), indicating the emissions from high-temperature processes (industrial sources or car engines). In this work, principal component analysis (PCA) is applied separately to each of the 13 fraction-related sets of the concentrations of the 18 PM-bound elements, and further, the fractions are grouped by their origin using cluster analysis (CA) applied to the 13 fraction-related first principal components (PC1). Four distinct groups of the PM fractions are identified: (PM1.6₋2.5, PM2.5₋4.4,), (PM0.03₋0.06, PM0.108₋0.17), (PM0.06₋0.108, PM0.17₋0.26, PM0.26₋0.4, PM0.4₋0.65, PM0.65₋1, PM1₋1.6), and (PM4.4₋6.8, PM6.8₋10, PM>10). The PM sources attributed to these groups by using PCA followed by CA are roughly the same as the sources from the apportionment done by analyzing the modality of the mass size distributions.

Traffic-generated changes in the chemical characteristics of size-segregated urban aerosols.

The road traffic impact on the concentrations of 13 fractions of particulate matter (PM) and their components was assessed. PM was sampled at two points in Katowice (southern Poland), a background point beyond the effects of road traffic, and a near-highway traffic point. The samples were analyzed for organic and elemental carbon, 8 water-soluble ions, 24 elements, and 16 polycyclic aromatic hydrocarbons (PAHs). The traffic emissions (mainly particles from car exhaust) enriched the ultrafine, submicron, and fine PM particles with elemental carbon. The traffic-caused re-suspension of the road and soil dust affecting the concentrations and chemical composition of the coarse PM fraction. However, for each PM fraction, the carcinogenic equivalent ratios, assumed as a measure of the hazard from 16 PAHs in this paper, were similar at the two sampling points. The traffic emissions from the highway appeared to have a weaker influence on the concentrations and chemical composition of PM in a typical urban area of southern Poland than elsewhere in Europe.

Off-gassing from firefighter suits (nomex) as an indoor source of BTEXS.

The clothes and special equipment of firefighters can be a source of indoor air pollution. Nevertheless, it has not been investigated so far what the scale of the release of various compounds from such materials into the indoor air can be. The following study analysed the results of an experiment involving the passive measurement of concentrations of selected compounds, i.a. benzene, toluene, ethylbenzene, m,p-xylene, o-xylene, styrene, isopropylbenzene and n-propylbenzene (BTEXS) in the air of a room where firefighters' special clothing, which had been previously exposed to emissions from simulated fires, was stored. The study included simulations of fires involving three materials: wood, processed wood (OSB/fibreboard) and a mixture of plastics. After being exposed to the simulated fire environment, special clothing (so-called nomex) was placed in a sealed chamber, where passive collection of BTEXS was carried out using tube-type axial passive samplers and a gas chromatograph. Irrespective of which burned material special clothing was exposed to, the compound emitted into the air most intensively was toluene. Its rate of release from a single nomex ranges from 4.4 to 28.6 µg h-1, while the corresponding rates for the sum of BTEXS are between 9.97 and 44.29 µg h-1.

Seasonal toxicity of urban road dust in runoff process-studies in Poland.

Urban road dust (URD) is one of the most important non-point sources of pollution in agglomerations. The aim of this study was to assess the seasonal toxic effects of URD runoff in two regions of Poland. The concentrations of elements in URD and leachate were studied. The impact of pollutants in URD runoff on water organisms was evaluated using Daphtoxkit F and Rotoxkit F (LC50). The acute toxicity tests for crustaceans and rotifers were selected as the response of these taxa reflects the impact on zooplankton, a key component of aquatic ecosystem and the basis of most food webs. The concentrations of elements were found to vary depending on the site, although URD samples collected in Katowice agglomeration (Upper Silesia) had higher values of elements (Mn, Cu, Zn, As) compared to Wroclaw (Lower Silesia). The concentrations of Mn, Zn, As, Cr, and Mg in water-soluble fraction of URD were higher in summer and winter in the Upper Silesia region due to rainwater runoff resulting from traffic, industries, post-industrial waste, and the presence of old heating systems. When comparing the content of elements in the water-soluble fraction between seasons, Zn, As, Cr, and Al concentrations were slightly higher in winter. The highest mortality of Daphnia magna and Brachiouns calyciflorus was observed in URD from both agglomerations in winter. However, the mortality is likely due to the concentration of elements or/and the coexistence of an unknown compound or a synergistic effect of the studied elements. This study highlights the alarming seasonal sources of elements in URD runoff, which will directly enter the food chain and affect the entire ecosystem, and human health.

Number size distribution of ambient particles in a typical urban site: the first Polish assessment based on long-term (9 months) measurements.

This work presents results from the long-term measurements of particle number carried out at an urban background station in Zabrze, Poland. Ambient particles with aerodynamic diameters of between 28 nm and 10 µ m were investigated by means of a DEKATI thirteen-stage electrical low pressure impactor (ELPI). The particle number-size distribution was bimodal, whilst its density function had the local maxima in the aerodynamic diameter intervals 0.056-0.095 µ m and 0.157-0.263 µ m. The average particle number in winter was nearly twice as high as in summer. The greatest number concentrations in winter were those of the particles with diameters of between 0.617 and 2.41 µ m, that is, the anthropogenic particles from fossil fuel combustion. Approximately 99% of the particles observed in Zabrze had aerodynamic diameters ≤ 1 µ m-they may have originated from the combustion of biomass, liquid, and gaseous fuels in domestic stoves or in car engines. The daily variation of particle number was similar for both seasons-the highest values were observed in the morning (traffic rush hour) and in the afternoon/late evening (traffic and house heating emissions). An additional maximum (0.028-0.056 µ m) observed in the early afternoon in summer was due to the intensive formation of new PM particles from gas precursors.

Submicrometer aerosol in rural and urban backgrounds in southern Poland: primary and secondary components of PM1.

Diurnal samples of PM(1) (submicrometer particles, having aerodynamic diameters not greater than 1 µm) were collected at an urban background site in Zabrze (from 01.08. to 31.12.2009) and a rural background site in Racibórz (from 01.08. to 31.12.2010). The samples were analyzed for carbon (organic and elemental), water soluble ions (Na(+), NH(4) (+), K(+), Mg(2+), Ca(2+), Cl(-), NO(3)(-), SO(4)(2-)) and concentrations of 21 elements by using, respectively, a Sunset Laboratory carbon analyzer, a Herisau Metrohm AG ion chromatograph, a PANalitycal Epsilon 5 spectrometer. To perform the monthly mass closure calculations for PM(1), the chemical components were categorized into organic matter (OM), elemental carbon (EC), secondary inorganic aerosol (SIA), crustal matter (CM), marine components (MC), other elements (OE) and unidentified matter (UM). The mass contributions of secondary (SOM) and primary (POM) organic matter to PM(1) were also estimated. In average, 50 % of PM(1) in Zabrze and 40 % in Racibórz were secondary aerosol coming from the transformations of its gaseous precursors. High concentrations and mass contributions of EC and OM to PM, and probable PM acidic nature in Zabrze, indicate particularly high hazard from the ambient submicrometer particles to the inhabitants of southern Poland.

Concentration, origin and health hazard from fine particle-bound PAH at three characteristic sites in Southern Poland.

Suspended particles with the aerodynamic diameters not greater than 2.5 µm (PM2.5) and 1 µm (PM1, sub-fraction of PM2.5) were sampled at three sites: an urban background site, rural background site, and urban traffic site in southern Poland. In total, there were 240 samples taken within 02.08.2009-27.12.2010. Fifteen polycyclic aromatic hydrocarbons (PAH) were determined in each dust fraction. The averages of the concentration of total PAH (ΣPAH) and of particular PAH, as well as the share of carcinogenic PAH in total PAH (ΣPAHcarc/ΣPAH), carcinogenic equivalent, mutagenic equivalent, and TCDD-toxic equivalent appeared high compared to other areas in the world. Their high values express the significance of health hazard from PM and PM-bound PAH in southern Poland. The diagnostic ratios suggest that PM-bound PAH originate from municipal (PM1-2.5) and vehicular (PM1) combustion.

Exploring the Relationship between Particulate Matter Emission and the Construction Material of Road Surface: Case Study of Highways and Motorways in Poland.

Road dust is an important inexhaustible source of particulate matter from traffic and the resuspension of finer particles carried by wind and traffic. The components of this material are of both natural and anthropogenic origin. Sources of particulate pollution are vehicles and road infrastructure. The work aimed to analyze the mass fraction of the finest fractions of road dust (<0.1 mm) collected from highways and expressways with asphalt and concrete surfaces. Sampling points were located in the central and southern parts of Poland. The research material was sieved on a sieve shaker. It has been proven that concrete pavement is less susceptible to abrasion than asphalt pavement. Particles formed under the influence of the erosion of asphalt and concrete belong to the fraction gathering coarser particles than the critical for this research fraction (<0.1 mm). It was found that limiting the area with sound-absorbing screens leads to the accumulation of fine road dust in this place, contrary to the space where are strong air drafts that remove smaller particles from the vicinity of the road. In general, the mass fraction of particles smaller than 100 µm in road dust was from 12.8% to 3.4% for asphalt surfaces and from 12.0% to 6.5% for concrete surfaces.

A study on the seasonal mass closure of ambient fine and coarse dusts in Zabrze, Poland.

Diurnal samples of PM(2.5) and PM(2.5-10) were taken in an urban background area in Zabrze (Upper Silesia in southern Poland) in the winter (January-March) and summer (July-September) of 2009. The samples were analyzed for carbon (organic and elemental), water soluble ions (Na(+), NH(4) (+), K(+), Mg(2+), Ca(2+), F(-), Cl(-), NO(3) (-), PO(4) (3-), SO(4) (2-)) and concentrations of 27 elements by using, respectively, a Behr C50 IRF carbon analyzer, a Herisau Metrohm AG ion chromatograph, and a PANalitycal EPSILON 5 X-ray fluorescence spectrometer. To perform the mass closure calculations for both dust fractions in the two periods, the particulate matter (PM) chemical components were categorized into organic matter, elemental carbon, secondary inorganic aerosol, crustal matter, marine components and unidentified matter. The chemical composition of the two dust fractions and the element enrichment coefficients in the two seasons, referred to proper emission profiles, proved about 80% of PM(2.5) and more than 50% (in winter 65%) of PM(2.5-10) mass coming from anthropogenic sources, mainly from fuel combustion and specific municipal emission shaping the winter emission of ambient dust in the area.

Mass size distribution and chemical composition of the surface layer of summer and winter airborne particles in Zabrze, Poland.

Mass size distributions of ambient aerosol were measured in Zabrze, a heavily industrialized city of Poland, during a summer and a winter season. The chemical analyses of the surface layer of PM(10), PM(2.5) and PM(1) in this area were also performed by X-ray photoelectron spectroscopy (XPS). Results suggested that the influence of an atmospheric aerosol on the health condition of Zabrze residents can be distinctly stronger in winter than in summer because of both: higher concentration level of particulate matter (PM) and higher contribution of fine particles in winter season compared to summer. In Zabrze in June (summer) PM(10) and PM(2.5) reached about 20 and 14 µg/m(3), respectively, while in December (winter) 57 and 51 µg/m(3), respectively. The XPS analysis showed that elemental carbon is the major surface component of studied airborne particles representing about 78%-80% (atomic mass) of all detected elements.

Particulate Matter Concentration in Selected Facilities as an Indicator of Exposure to Their Service Activities.

In recent years, the correlation between the concentration of pollutants in the atmosphere and inside buildings has been reported as high. The air inside living quarters and public utility buildings or the interiors of public transport vehicles, as well as the relationship between the internal and external sources of particulate matter (PM) and gaseous pollutants, have underwent sufficient research. On the other hand, non-production rooms, i.e., offices, restaurants, beauty salons, etc. remain very poorly recognized in this respect. For the above reasons, the aim of this work is to determine the difference in the total dust (TSP) and respirable PM (PM4) concentrations in selected rooms, i.e., offices and beauty centers, in relation to their outdoor concentrations. They were measured at six locations in accordance with the standard for the conditions at workplaces by means of PM aspirators. Indoor concentrations of TSP and PM4 were much higher than those in the external surroundings of the facilities. There were no significant relationships between the TSP and PM4 concentrations inside and outside tested rooms. Although the characteristic of the internal PM essentially depends on the characteristics of the external PM migrating to the interior of the premises, considering some types of non-production premises, internal emissions fundamentally changed the characteristics of PM.

Is Poland at risk of urban road dust? Comparison studies on mutagenicity of dust.

Depopulation concerns many polish cities, with the exception of a few metropolises such as Wroclaw (Lower Silesia) and Katowice (Upper Silesia) where investments are growing and therefore more humans are exposed to urban environmental pollution. Accumulation of toxic substances on road surfaces is a major global challenge requiring methods of assessing risk that initiate the proper management strategies. In this study urban road dust (URD) has been collected at seventeen sites in Lower and Upper Silesia regions in Poland renowned for their elevated level of pollution. The aim of the study was: (i) to determine PAH concentration in URD in both regions with the identification of their possible sources based on diagnostic ratio; (ii) to assess possible mutagenic effects of URD with the application of Ames test (Salmonella assay); (iii) to define a possible carcinogenic risk related to URD in both studied regions. We found that the total PAH content of collected URD samples ranged from 142.4 to 1349.4 ng g-1. The diagnostic ratio of PAHs in URD for all studied sites showed that pyrogenic combustion predominated indicating traffic-related and biomass sources of pollution. The Ames assay, which has never been used in studies of URD in Poland, demonstrated that in both regions, URD samples (from eight sites), were characterised by the highest mutagenicity values. Additionally, Incremental Lifetime Cancer Risk (ILCR) values, based on PAH content only, were between 10 and 6 to 10-4 indicating potential risk of cancer. Reassuming, humans in both agglomerations are exposed to factors or compounds with carcinogenic properties which may have an adverse health effect through the urban road dust mainly due to vehicular traffic, heating systems and industrial activities.

Properties of Particulate Matter in the Air of the Wieliczka Salt Mine and Related Health Benefits for Tourists.

This study aimed to evaluate the mass concentration of size-resolved (PM1, PM2.5, PM4, PM10, PM100) particulate matter (PM) in the Wieliczka Salt Mine located in southern Poland, compare them with the concentrations of the same PM fractions in the atmospheric air, and estimate the dose of dry salt aerosol inhaled by the mine visitors. Measurements were conducted for 2 h a day, simultaneously inside (tourist route, passage to the health resort, health resort) and outside the mine (duty-room), for three days in the summer of 2017 using DustTrak DRX devices (optical method). The highest average PM concentrations were recorded on the tourist route (54-81 µg/m3), while the lowest was in the passage to the health resort (49-62 µg/m3). At the same time, the mean outdoor PM concentrations were 14-20 µg/m3. Fine particles constituting the majority of PM mass (68-80%) in the mine originated from internal sources, while the presence of coarse particles was associated with tourist traffic. High PM deposition factors in the respiratory tract of children and adults estimated for particular mine chambers (0.58-0.70), the predominance of respirable particles in PM mass, and the high content of NaCl in PM composition indicate high health benefits for mine visitors.