A measurement of the equation of state of carbon envelopes of white dwarfs.

White dwarfs represent the final state of evolution for most stars1-3. Certain classes of white dwarfs pulsate4,5, leading to observable brightness variations, and analysis of these variations with theoretical stellar models probes their internal structure. Modelling of these pulsating stars provides stringent tests of white dwarf models and a detailed picture of the outcome of the late stages of stellar evolution6. However, the high-energy-density states that exist in white dwarfs are extremely difficult to reach and to measure in the laboratory, so theoretical predictions are largely untested at these conditions. Here we report measurements of the relationship between pressure and density along the principal shock Hugoniot (equations describing the state of the sample material before and after the passage of the shock derived from conservation laws) of hydrocarbon to within five per cent. The observed maximum compressibility is consistent with theoretical models that include detailed electronic structure. This is relevant for the equation of state of matter at pressures ranging from 100 million to 450 million atmospheres, where the understanding of white dwarf physics is sensitive to the equation of state and where models differ considerably. The measurements test these equation-of-state relations that are used in the modelling of white dwarfs and inertial confinement fusion experiments7,8, and we predict an increase in compressibility due to ionization of the inner-core orbitals of carbon. We also find that a detailed treatment of the electronic structure and the electron degeneracy pressure is required to capture the measured shape of the pressure-density evolution for hydrocarbon before peak compression. Our results illuminate the equation of state of the white dwarf envelope (the region surrounding the stellar core that contains partially ionized and partially degenerate non-ideal plasmas), which is a weak link in the constitutive physics informing the structure and evolution of white dwarf stars9.

Prevention of internal bacterial colonization of dental implants: A comparative longitudinal observational study.

OBJECTIVES: Previous studies have indicated a progressive internal bacterial colonization of implants and possible implications for peri-implant bone loss. The aim of this study was to evaluate a decontamination protocol, two disinfectants, and a sealant for their ability to prevent such a colonization. MATERIALS AND METHODS: Bacterial samples were harvested from the peri-implant sulcus (external) and following abutment removal from the implant cavity (internal) during routine supportive peri-implant care in 30 edentulous patients 2 years after they had obtained two implants. In a split-mouth design, implants were randomly assigned to receive either internal decontamination alone (10% H2 O2 , brush) or additional placement of either sealant (GS), disinfectant agent (CHX-varnish) or disinfectant gel (1% CHX-gel), in the internal cavity before remounting of abutment/suprastructure. Twelve months later, internal and external sampling was repeated. Total bacterial counts (TBCs) were determined using real-time PCR in a total of 240 samples (eight per patient). RESULTS: Total bacterial counts in the internal cavity significantly reduced overall treatment modalities 1 year after the treatments (4.0 [2.3-6.9]-fold reduction; p = .000). No significant differences between the four treatment types were found (p = .348). Comparison of internal and external sampling points revealed significant correlation (R2 = .366; p = .000) with systematically higher TBC counts in external samples. CONCLUSIONS: Within the limitations of the present study, it can be concluded that the use of disinfectant agents or a sealant did not show an additional benefit in the prevention of internal bacterial colonization of implants compared to a decontamination protocol alone.

IMPACT OF LOADING PROTOCOL OF 2-IMPLANT BAR-RETAINED MANDIBULAR OVERDENTURES ON ORAL HEALTH-RELATED QUALITY OF LIFE: A RANDOMIZED CONTROLLED TRIAL.

OBJECTIVES: Aim was to assess whether immediate loading (IL) is more effective than delayed loading (DL) for 2-implant bar-retained mandibular overdentures in terms of oral health-related quality of life (OHRQoL) improvement over a period of 24-month. METHODS: In this randomized controlled trial, 32 edentulous patients (mean age: 65.7 ± 10.6 years, 50.0% female) were included. Potential participants had to be unsatisfied with the retention of their current mandibular complete denture and demanded implant treatment for inclusion in the study. OHRQoL was assessed with the 49-item Oral Health Impact Profile (OHIP) at baseline before treatment and 1, 3, 6, 12, and 24 months after implant loading and insertion of implant-retained bars for overdenture support. A mixed-effects model with patients as random effect and an unstructured covariance matrix was developed to address repeated outcome measurement. RESULTS: Patients' OHRQoL impairment at baseline was substantial indicated by mean OHIP summary score of 45.1 points. OHIP summary scores decreased substantially from baseline to 1-month follow-up to a mean of 33.5 points (P = .020). OHRQoL further improved during study period indicated by OHIP summary score of 25.7 points at 24-month follow-up. Raw treatment effects (IL vs. DL) ranged from -1.2 OHIP points for 12-month follow-up to 5.8 OHIP points for 24-month follow-up. Assuming constant treatment and time effects, treatment effect was small and not statistically significant (-0.7 OHIP points; P= .918). CONCLUSION: A 2-implant bar-retained mandibular overdentures substantially improves OHRQoL over a period of at least 24 months. There seems to be no significant effect of implant loading protocol.

Towards a dynamic compression facility at the ESRF.

Results of the 2018 commissioning and experimental campaigns of the new High Power Laser Facility on the Energy-dispersive X-ray Absorption Spectroscopy (ED-XAS) beamline ID24 at the ESRF are presented. The front-end of the future laser, delivering 15 J in 10 ns, was interfaced to the beamline. Laser-driven dynamic compression experiments were performed on iron oxides, iron alloys and bismuth probed by online time-resolved XAS.

Soft tissue response to different abutment materials: A controlled and randomized human study using an experimental model.

OBJECTIVES: Aim of this study was to compare the soft tissue response to implant abutments made of titanium, zirconia, zirconia veneered with feldspar ceramics and PEEK by various clinical, histological, microbiological, and molecular biological markers in an experimental model. MATERIALS AND METHODS: A total of 40 experimental one-piece healing abutments of four different materials were mounted on bone level implants in 20 volunteering patients (split-mouth design). After a three-month period of open healing, clinical parameters at the abutments were assessed and adjacent mucosa was sampled for inflammatory cytokine mRNA concentrations and histological analysis by a novel method. In addition, PISF samples were obtained for the analysis of periodonto-pathogenic bacteria counts and active MMP-8 levels. Marginal bone level change was measured by intra oral radiographs. RESULTS: Abutments of the different materials did not exhibit significant differences regarding clinical parameters, pathogenic bacteria counts or pro-inflammatory cytokine concentrations. Likewise, no significant differences were detected regarding soft tissue morphology or bone level change. Compared to titanium abutments, significantly less mononuclear inflammatory cells were detected in the mucosa at abutments made of zirconia veneered with feldspar ceramics. CONCLUSIONS: All examined abutment materials exhibited a similar soft tissue response compared to titanium and histological data did not reveal early signs of elevated inflammation caused by PEEK- and feldspar-veneered zirconia abutments. Due to the short observation period and the small sample size, a final conclusion on the long-term suitability of those abutment materials cannot be drawn. However, based on the presented data, we consider further studies on that subject as appropriate.

Influence of the loading protocol and platform switching in two-implant bar-retained overdentures: 3-year results from a randomized controlled equivalence clinical trial.

OBJECTIVES: To test the null hypothesis that vertical peri-implant bone level alterations (ΔIBL) are equivalent in immediately (IL) and 3-month post-placement (DL) loaded implants in mandibular implant overdentures (IODs) on two implants. MATERIALS AND METHODS: Thirty-two patients receiving two interforaminal implants, one with a platform-switched and one with a platform-matching abutment were randomly assigned to the IL or DL group (allocation ratio 1:1). All implants were primarily splinted with chairside-customized bars, converting the existing removable complete dentures to IODs. Standardized radiographs were recorded. The influence of the loading protocol (IL vs. DL), implant platform (platform switched vs. platform matching), implant site (43 vs. 33), participant age (≤65 vs. >65 years), and definition of baseline (implant placement vs. implant loading) were analyzed, applying linear regression analyses (α = 0.05). The equivalence range was [-0.4; 0.4]. RESULTS: Three participants of the IL group were lost during follow-up. The overall mean ΔIBL was -0.96 ± 0.89 mm. The ΔIBL was equivalent in terms of the implant platform and implant site but not in terms of participant age (in favor of more elderly participants) and the loading protocol. A significantly smaller ΔIBL was observed in the IL when the baseline was considered to be implant placement (p = .017), but not when it was considered to be implant loading (p = .084). CONCLUSION: Immediate loading of primary-splinted implants in two-implant bar-retained overdentures, seems beneficial relative to loading 3 months post-placement, with respect to ΔIBL. The ΔIBL were equivalent in terms of platform switching.

Novel method to obtain human non-separated histological samples for the assessment of peri-implant soft tissue response: A feasibility study.

OBJECTIVES: To introduce a standardized and less invasive clinical model that provides histological information on the abutment-mucosa interface in humans. MATERIALS AND METHODS: New experimental healing abutments were left in an open healing position on bone-level implants in the interforaminal region of the mandibles in six edentulous patients. The one-piece abutments were hollow cylinder-shaped with two lateral openings that allow for ingrowth of the peri-implant mucosa into the central abutment cavity. After three months of healing, abutments and ingrown mucosa were sampled and processed for histological analysis in a non-separated resin-embedding technique. To test the validity of the new model, the ingrown tissue was compared to the peri-implant mucosa around the same samples. RESULTS: None of the experimental abutments exhibited signs of failure, and all samples showed mucosal ingrowth to the inner-abutment cavity. Comparison of ingrown tissue and peri-implant mucosa revealed no significant differences regarding the traits: tissue morphology, quality of collagen fibers, and adherence to the abutment. Ingrown mucosa exhibited a tendency for higher leukocyte infiltration. CONCLUSIONS: The presented model is a promising approach to reduce invasiveness during the sampling process for human non-separated abutment biopsies.

Comparison of irrigation protocols for the internal decontamination of dental implants-results of in vitro and in vivo studies.

OBJECTIVES: Previous investigations have shown a progressive bacterial colonization of the internal cavities of two-piece dental implants with possible implications for peri-implant bone loss. The aim of the study was to compare different irrigation protocols for the internal decontamination of implants in vitro and in vivo. MATERIALS AND METHODS: In the in vitro part, 80 samples were obtained 24 h after inoculation with an aliquot of subgingival bacteria from 40 implants as follows: before and after either cleaning with a brush and an irrigation solution (irrigation-brush-irrigation: test) or repeated irrigation alone (irrigation-irrigation: control). In the clinical study, 40 samples from twenty partially edentulous patients contributing each with one implant were collected after removal of abutment and suprastructure with sterile paper points immediately before and after decontamination and subsequently analyzed for total bacterial counts (TBC) by real-time-PCR. Irrigation solutions were chlorhexidine (0.2% (CHX)), H2 O2 (10%), alcohol (70%, (ALC)), and NaCl (0.9%). Differences in proportional reduction of TBC between the four irrigation solutions were analyzed. RESULTS: Irrigation with H2 O2 showed the highest effect in both parts of the study (relative TBC reduction in vitro: H2 O2 : 87.1%, CHX: 56.9%, ALC: 43.7%, NaCl: 42.7%; in vivo: H2 O2 : 51.4%, ALC: 30.4%, NaCl: 26.3%, CHX: 7.1%). The additional use of a brush showed no beneficial effect (p = 0.088). Overall, H2 O2 was superior to all other irrigation solutions with regard to relative TBC reduction. CONCLUSIONS: The present results indicate the potential of an irrigation protocol that includes a 10% H2 O2 solution for the internal decontamination of implants. (ClinicalTrials.gov NCT01917305).

Short strategic implants for mandibular removable partial dentures: One-year results from a pilot randomized crossover abutment type study.

OBJECTIVES: The present pilot study analyzed two abutment types (a retentive ball and a non-retentive dome) in implant-assisted removable partial dentures (IARPDs) on 6 mm short implants with respect to clinical, radiological, and patient-reported outcomes (PROs), during the first year. MATERIALS AND METHODS: Two implants were placed bilaterally in mandibular molar sites, converting existing free-end removable partial dentures (RPDs) to IARPDs. Twelve subjects were randomized to initially receive either the dome (Group A, n = 6) or the ball abutment (Group B, n = 6). After eight weeks, the abutments were exchanged. After another 8 weeks, the participants were given the choice of one of the abutments. Mean values and standard deviations (SD) were calculated, and random-effect linear regression analyses were applied to analyze marginal bone level alterations and PROs (α < .05). RESULTS: Twelve participants were included in the study; however, one dropout occurred. Patient ratings increased significantly in both study groups. The majority of the participants (82%) ultimately chose the ball abutment. The implant survival rate was 100%, and the success rate was 90.9% twelve months after implant placement (mean peri-implant bone-loss: -1.2; SD: 0.6 mm) without a statistically significant difference between the study groups, in terms of clinical- and radiological outcomes. CONCLUSION: Placing 6 mm short implants at mandibular molar sites of RPD wearers seems to be a viable treatment option, based on this investigation with a short-term follow-up. Although only minor differences between the two abutments were observed, patients seem to prefer the ball over the dome abutment.

In vitro cytotoxicity of different dental resin-cements on human cell lines.

Adhesive resin-cements are increasingly used in modern dentistry. Nevertheless, released substances from resin materials have been shown to cause cellular toxic effects. Disc-shaped specimens from 12 different resin cements and one conventional zinc phosphate cement were prepared and used for direct stimulation of five different human cell lines via transwell cell culture system or in an indirect way using conditioned cell culture media. Cytotoxicity was determined using LDH and BCA assays. All tested cements led to a decrease of cell viability but to a distinct extent depending on cell type, luting material, and cytotoxicity assay. In general, cements exhibited a more pronounced cytotoxicity in direct stimulation experiments compared to stimulations using conditioned media. Interestingly, the conventional zinc phosphate cement showed the lowest impact on cell viability. On cellular level, highest cytotoxic effects were detected in osteoblastic cell lines. All resin cements reduced cell viability of human cells with significant differences depending on cell type and cement material. Especially, osteoblastic cells demonstrated a tremendous increase of cytotoxicity after cement exposure. Although the results of this in vitro study cannot be transferred directly to a clinical setting, it shows that eluted substances from resin cements may disturb osteoblastic homeostasis that in turn could lead to conditions favoring peri-implant bone destruction. Thus, the wide use of resin cements in every clinical situation should be scrutinized. A correct use with complete removal of all cement residues and a sufficient polymerization should be given the utmost attention in clinical usage.

The Presence of Yin-Yang Effects in the Migration Pattern of Staurosporine-Treated Single versus Collective Breast Carcinoma Cells.

BACKGROUND: Staurosporine-dependent single and collective cell migration patterns of breast carcinoma cells MDA-MB-231, MCF-7, and SK-BR-3 were analysed to characterise the presence of drug-dependent migration promoting and inhibiting yin-yang effects. METHODS: Migration patterns of various breast cancer cells after staurosporine treatment were investigated using Western blot, cell toxicity assays, single and collective cell migration assays, and video time-lapse. Statistical analyses were performed with Kruskal-Wallis and Fligner-Killeen tests. RESULTS: Application of staurosporine induced the migration of single MCF-7 cells but inhibited collective cell migration. With the exception of low-density SK-BR-3 cells, staurosporine induced the generation of immobile flattened giant cells. Video time-lapse analysis revealed that within the borderline of cell collectives, staurosporine reduced the velocity of individual MDA-MB-231 and SK-BR-3, but not of MCF-7 cells. In individual MCF-7 cells, mainly the directionality of migration became disturbed, which led to an increased migration rate parallel to the borderline, and hereby to an inhibition of the migration of the cell collective as a total. Moreover, the application of staurosporine led to a transient activation of ERK1/2 in all cell lines. CONCLUSION: Dependent on the context (single versus collective cells), a drug may induce opposite effects in the same cell line.

Platform switching in two-implant bar-retained mandibular overdentures: 1-year results from a split-mouth randomized controlled clinical trial.

OBJECTIVES: The concept of platform switching is widely applied in current implant dentistry; however, the influence on peri-implant bone-level alterations (ΔIBL), especially in the field of implant overdentures (IODs), remains inconclusive. Therefore, the present study aimed to test the alternative hypothesis that there is an equivalent ΔIBLs at platform-switching and platform-matching implant abutments in 2-implant bar-retained IODs. MATERIALS AND METHODS: Two interforaminal implants were placed in 32 subjects, who were randomly assigned to either an immediate- or a 3-month post-placement loading group. Furthermore, one implant in each subject was randomly assigned to receive a platform-switched abutment (test), and one a platform-matching abutment (control). The implants were splinted with prefabricated, chairside customized bars. ΔIBL was recorded by using customized radiograph holders at implant placement, implant loading, 3 months, 6 months, and 12 months after loading. RESULTS: After 1 year, equivalent ΔIBL could be identified (test: -0.51 mm ± 0.49 versus control: -0.56 mm ± 0.52; p < .001). ΔIBL increased over time and was more pronounced in the delayed-loaded implants (-0.87 mm ± 0.61) relative to the immediately loaded implants (-0.35 mm ± 0.43; p = .022). CONCLUSIONS: The prosthetic concept of platform switching does not necessarily lead to reduced bone loss. Immediate-loading of implants, primarily splinted with a bar, might be beneficial regarding peri-implant bone-level alterations over a short-term period.

Ghrelin promotes oral tumor cell proliferation by modifying GLUT1 expression.

In our study, ghrelin was investigated with respect to its capacity on proliferative effects and molecular correlations on oral tumor cells. The presence of all molecular components of the ghrelin system, i.e., ghrelin and its receptors, was analyzed and could be detected using real-time PCR and immunohistochemistry. To examine cellular effects caused by ghrelin and to clarify downstream-regulatory mechanisms, two different oral tumor cell lines (BHY and HN) were used in cell culture experiments. Stimulation of either cell line with ghrelin led to a significantly increased proliferation. Signal transduction occurred through phosphorylation of GSK-3ß and nuclear translocation of ß-catenin. This effect could be inhibited by blocking protein kinase A. Glucose transporter1 (GLUT1), as an important factor for delivering sufficient amounts of glucose to tumor cells having high requirements for this carbohydrate (Warburg effect) was up-regulated by exogenous and endogenous ghrelin. Silencing intracellular ghrelin concentrations using siRNA led to a significant decreased expression of GLUT1 and proliferation. In conclusion, our study describes the role for the appetite-stimulating peptide hormone ghrelin in oral cancer proliferation under the particular aspect of glucose uptake: (1) tumor cells are a source of ghrelin. (2) Ghrelin affects tumor cell proliferation through autocrine and/or paracrine activity. (3) Ghrelin modulates GLUT1 expression and thus indirectly enhances tumor cell proliferation. These findings are of major relevance, because glucose uptake is assumed to be a promising target for cancer treatment.

A novel blue light laser system for surgical applications in dentistry: evaluation of specific laser-tissue interactions in monolayer cultures.

OBJECTIVES: The objective of this study was to examine a new blue light diode laser system (445 nm) for dental soft tissue surgery on cellular level. MATERIALS AND METHODS: An in vitro cell culture model was established to evaluate the effects of the 445-nm diode laser in comparison to an established infrared diode laser (IR). Monolayer cell cultures were irradiated and wound healing was morphometrically measured. Fluorescence staining was used for proof of potential DNA double-strand breaks as well as cytoskeleton alterations. Cellular live/dead discrimination was performed and temperature development during laser irradiation was measured with a thermographic infrared camera. RESULTS: A characteristic zone formation was detected after irradiation with both wavelengths. Despite a larger wound area after irradiation with 445 nm, due to its higher temperature development, this laser system showed a faster wound healing in comparison to the IR laser. No increase of devitalized cells was documented with higher distances between laser tip and cell layer and thus without thermal interaction. Neither cytoskeleton alteration nor DNA double-strand breaks could be recorded after irradiation in non-contact mode. CONCLUSIONS: The blue diode laser system demonstrated an excellent direct thermal coupling to cells and tissues without side effects even by reduced power settings. CLINICAL RELEVANCE: The blue diode laser seems to be a promising technology for clinical application due to high absorption of blue light without major side effects in adjacent tissues even by reduced power settings.

Oncogenic relevant defensins: expression pattern and proliferation characteristics of human tumor cell lines.

The objective of this study was to investigate gene expression levels of oncogenic relevant human defensins and their impact on proliferation rates of 29 cell lines derived from main types of different tumor origins. Differential gene expression analysis of human defensins was performed by real-time PCR experiments. The proliferation rate of tumor cells that had been cultivated in the absence or presence of biologically active peptides was analyzed with a lactate dehydrogenase assay kit. At least one member of the defensin family was expressed in each tumor cell line, whereby α-defensin (DEFA1), DEFA2, or DEFA3 transcripts could be ubiquitously detected. Cell lines of neural origin (glioma, neuroblastoma, and small-cell lung carcinoma) expressed far less human ß-defensins (hBDs) in comparison to other tumor types. The expression level of a specific defensin in various cell lines could vary by more than five orders of magnitude. Compensatory mechanisms on the expression levels of the different defensins could not be strictly observed. Only in 3 out of 29 tumor cell lines the proliferation rate was affected after defensin stimulation. The variable appearance of defensins, as well as the cell line-restricted functional activity, argues for the integration of defensins in complex cellular and molecular networks that tolerate rather flexible expression patterns.

Cellular Distribution and Gene Expression Pattern of Metastasin (S100A4), Calgranulin A (S100A8), and Calgranulin B (S100A9) in Oral Lesions as Markers for Molecular Pathology.

The objective of this study was to analyze cellular localization and expression levels of oncologic relevant members of the S100 family in common oral lesions.Biopsies of various oral lesions were analyzed. S100A4 showed a higher expression rate in leukoplakias and oral squamous cell carcinomas. Transcript levels of S100A8 and S100A9 were significantly decreased in malignant OSCCs. A correlation could be drawn between the expression levels of these genes and the pathological characteristics of the investigated lesions. S100A4, A8, and A9 proteins represent promising marker genes to evaluate the risk potential of suspicious oral lesions in molecular pathology.

Staurosporine analogs promote distinct patterns of process outgrowth and polyploidy in small cell lung carcinoma cells.

We have recently shown that staurosporine mediates the conversion of small cell lung carcinoma (SCLC) cells into a neuron-like process-bearing phenotype. Here, we have extended these studies to the staurosporine analogs K252a, lestaurtinib, PKC412, stauprimide, and UCN-01 and analyzed their influence on process extension, cell cycle distribution, and induction of polyploidy in four SCLC cell lines. In GLC-2 cells, all compounds provoked extensive process formation with the exception of PKC412 that showed no response. In H1184 cells, process formation was predominantly induced by staurosporine and, to lesser extent, in lestaurtinib-, stauprimide-, and UCN-01-treated cells. In the presence of K252a or PKC412, cells became bipolar and spindle shaped or showed pronounced cell flattening. In GLC-36 and SCLC-24H cells, only cell flattening was detectable. Process formation was reversible upon drug removal as shown for GLC-2 and H1184 cells. Fluorescence-activated cell sorting (FACS) and fluorescence in situ hybridization (FISH) analysis indicated the induction of polyploidy in all staurosporine and in two out of four stauprimide-treated SCLC cell lines. For other staurosporine analogs, polyploidy was observed only in UCN-01-treated GLC-36 cells and in K252a-treated H1184 and GLC-36 cells. The presence of staurosporine or its analogs did not alter the constitutive activation pattern of the canonical Akt/PI3K or MEK/extracellular signal-regulated kinase (ERK)1/2 signaling pathways nor could we detect an influence of stauprimide application on the expression level of the c-Myc oncogene. These data demonstrate that in SCLC cells, albeit a higher substrate specificity, staurosporine analogs can induce staurosporine-comparable effects.

Functional characterization of the parathyroid hormone 1 receptor in human periodontal ligament cells.

OBJECTIVES: Intermittent parathyroid hormone (PTH) exerts anabolic effects on bone and has been approved for osteoporosis therapy. The dual actions of PTH are mediated primarily through the parathyroid hormone 1 receptor (PTH1R). Upon ligand binding, PTH1R activates diverse signaling pathways, including cAMP/protein kinase A (PKA)- and phospholipase C/protein kinase C (PLC/PKC)-dependent pathways. PTH1R has been abundantly studied in bone cells. Knowledge on PTH1R characteristics and physiology in periodontal ligament (PDL) cells is still in its infancy. MATERIALS AND METHODS: We characterized PTH1R in PDL cells in terms of its cellular localization, binding affinity, and signal transduction and compared these characteristics to those of MG63 osteoblast-like cells. RESULTS: PTH1R mRNA/protein was identified in PDL and MG63 cells. PTH1R was mainly localized on the plasma membrane, in vesicular structures inside the cell, and, to some extent, in the nucleus of both cell types. Binding characteristics of PTH1R were cell type specific, with PDL cells demonstrating a lower binding affinity. The response of cAMP and active PKC production in MG63 cells was dose dependent with increasing PTH(1-34) concentration, whereas in PDL cells, it was regulated biphasically. However, we observed a cross talk between the cAMP/PKA and PLC/PKC signaling pathways, which were regulated diametrically opposed at a given concentration of PTH(1-34). CONCLUSION: These data indicate that, albeit the similarity in its subcellular distribution, PTH1R in PDL cells exhibits characteristics different from those in MG63 cells, pointing to the cell type specificity of this receptor. CLINICAL RELEVANCE: The findings further elucidate the characteristics of PTH action in dental tissues and widen the theoretical basis for the development of anabolic treatment strategies.

Influence of Cementation Mode and Ferrule Design on the Fatigue Resistance of Monolithic Zirconia Endocrowns.

Background: Classic endocrowns made of dental ceramics are considered a promising alternative to traditional post-endodontic restorations. The use of circular ferrules in endocrowns is a topic of controversial discussion. Therefore, the present study aims to evaluate the effect of ferrule design and cementation mode on the fatigue resistance of zirconia endocrowns. Methods: Eighty human molars were divided into four groups (n = 20): NFC (no-ferrule, conventional cementation), NFA (no-ferrule, adhesive luting), FC (ferrule, conventional cementation) and FA (ferrule, adhesive luting). Both the classic and the modified endocrown preparation with a two-millimeter ferrule design were carried out. Endocrowns were fabricated from zirconia using the CEREC system. After thermocycling, specimens were loaded according to the step-stress test up to 1500 N. Results: Failure rate was low; 88.8% of total specimens passed the step-stress test. Fractures were distributed between all groups; no significant differences in fatigue resistance were detected for preparation design and cementation mode. Conclusions: Endocrowns appear to be a promising concept for endodontically treated molars. Ferrule and also cementation mode have only a minor influence on fatigue resistance of zirconia endocrowns. However, at very high forces, the marginal area of the ferrule represents a weak point.