Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 41
Filtrar
1.
Phys Chem Chem Phys ; 26(10): 8327-8333, 2024 Mar 06.
Artigo em Inglês | MEDLINE | ID: mdl-38391147

RESUMO

Delafossites, typically denoted by the formula ABO2, are a class of layered materials that exhibit a wide range of electronic and optical properties. Recently, the idea of modifying these delafossites into ordered kagome or honeycomb phases via strategic doping has emerged as a potential way to tailor these properties. In this study, we use high-throughput density functional theory calculations to explore many possible candidate kagome and honeycomb phases by considering dopants selected from the parent compounds of known ternary delafossite oxides from the inorganic crystal structure database. Our results indicate that while A-site in existing delafossites can host a limited range of elemental specifies, and display a low propensity for mixing or ordering, the oxide sub-units in the BO2 much more readily admit guest species. Our study identifies four candidate B-site kagome and fifteen candidate B-site honeycombs with a formation energy more than 50 meV f.u.-1 below other competing phases. The ability to predict and control the formation of these unique structures offers exciting opportunities in materials design, where innovative properties can be engineered through the selection of specific dopants. A number of these constitute novel correlated metals, which may be of interest for subsequent efforts in synthesis. These novel correlated metals may have significant implications for quantum computing, spintronics, and high-temperature superconductivity, thus inspiring future experimental synthesis and characterization of these proposed materials.

2.
Phys Chem Chem Phys ; 26(8): 6967-6976, 2024 Feb 22.
Artigo em Inglês | MEDLINE | ID: mdl-38334756

RESUMO

As the only semimetallic d10-based delafossite, AgNiO2 has received a great deal of attention due to both its unique semimetallicity and its antiferromagnetism in the NiO2 layer that is coupled with a lattice distortion. In contrast, other delafossites such as AgCoO2 are insulating. Here we study how the electronic structure of AgNi1-xCoxO2 alloys vary with Ni/Co concentration, in order to investigate the electronic properties and phase stability of the intermetallics. While the electronic and magnetic structure of delafossites have been studied using density functional theory (DFT), earlier studies have not included corrections for strong on-site Coulomb interactions. In order to treat these interactions accurately, in this study we use Quantum Monte Carlo (QMC) simulations to obtain accurate estimates for the electronic and magnetic properties of AgNiO2. By comparison to DFT results we show that these electron correlations are critical to account for. We show that Co doping on the magnetic Ni sites results in a metal-insulator transition near x ∼0.33, and reentrant behavior near x ∼ 0.66.

3.
Nano Lett ; 23(16): 7279-7287, 2023 Aug 23.
Artigo em Inglês | MEDLINE | ID: mdl-37527431

RESUMO

The current challenge to realizing continuously tunable magnetism lies in our inability to systematically change properties, such as valence, spin, and orbital degrees of freedom, as well as crystallographic geometry. Here, we demonstrate that ferromagnetism can be externally turned on with the application of low-energy helium implantation and can be subsequently erased and returned to the pristine state via annealing. This high level of continuous control is made possible by targeting magnetic metastability in the ultrahigh-conductivity, nonmagnetic layered oxide PdCoO2 where local lattice distortions generated by helium implantation induce the emergence of a net moment on the surrounding transition metal octahedral sites. These highly localized moments communicate through the itinerant metal states, which trigger the onset of percolated long-range ferromagnetism. The ability to continuously tune competing interactions enables tailoring precise magnetic and magnetotransport responses in an ultrahigh-conductivity film and will be critical to applications across spintronics.

4.
J Chem Phys ; 159(11)2023 Sep 21.
Artigo em Inglês | MEDLINE | ID: mdl-37724730

RESUMO

We aim to improve upon the variational Monte Carlo (VMC) approach for excitations replacing the Jastrow factor by an auxiliary bosonic (AB) ground state and multiplying it by a fermionic component factor. The instantaneous change in imaginary time of an arbitrary excitation in the original interacting fermionic system is obtained by measuring observables via the ground-state distribution of walkers of an AB system that is subject to an auxiliary effective potential. The effective potential is used to (i) drive the AB system's ground-state configuration space toward the configuration space of the excitations of the original fermionic system and (ii) subtract from a diffusion Monte Carlo (DMC) calculation contributions that can be included in conventional approximations, such as mean-field and configuration interaction (CI) methods. In this novel approach, the AB ground state is treated statistically in DMC, whereas the fermionic component of the original system is expanded in a basis. The excitation energies of the fermionic eigenstates are obtained by sampling a fermion-boson coupling term on the AB ground state. We show that this approach can take advantage of and correct for approximate eigenstates obtained via mean-field calculations or truncated interactions. We demonstrate that the AB ground-state factor incorporates the correlations missed by standard Jastrow factors, further reducing basis truncation errors. Relevant parts of the theory have been tested in soluble model systems and exhibit excellent agreement with exact analytical data and CI and VMC approaches. In particular, for limited basis set expansions and sufficient statistics, AB approaches outperform CI and VMC in terms of basis size for the same systems. The implementation of this method in current codes, despite being demanding, will be facilitated by reusing procedures already developed for calculating ground-state properties with DMC and excitations with VMC.

5.
J Chem Phys ; 159(16)2023 Oct 28.
Artigo em Inglês | MEDLINE | ID: mdl-37888761

RESUMO

Pseudopotential locality errors have hampered the applications of the diffusion Monte Carlo (DMC) method in materials containing transition metals, in particular oxides. We have developed locality error free effective core potentials, pseudo-Hamiltonians, for transition metals ranging from Cr to Zn. We have modified a procedure published by some of us in Bennett et al. [J. Chem. Theory Comput. 18, 828 (2022)]. We carefully optimized our pseudo-Hamiltonians and achieved transferability errors comparable to the best semilocal pseudopotentials used with DMC but without incurring in locality errors. Our pseudo-Hamiltonian set (named OPH23) bears the potential to significantly improve the accuracy of many-body-first-principles calculations in fundamental science research of complex materials involving transition metals.

6.
Phys Rev Lett ; 129(23): 235701, 2022 Dec 02.
Artigo em Inglês | MEDLINE | ID: mdl-36563221

RESUMO

Understanding the behavior of defects in the complex oxides is key to controlling myriad ionic and electronic properties in these multifunctional materials. The observation of defect dynamics, however, requires a unique probe-one sensitive to the configuration of defects as well as its time evolution. Here, we present measurements of oxygen vacancy ordering in epitaxial thin films of SrCoO_{x} and the brownmillerite-perovskite phase transition employing x-ray photon correlation spectroscopy. These and associated synchrotron measurements and theory calculations reveal the close interaction between the kinetics and the dynamics of the phase transition, showing how spatial and temporal fluctuations of heterointerface evolve during the transformation process. The energetics of the transition are correlated with the behavior of oxygen vacancies, and the dimensionality of the transformation is shown to depend strongly on whether the phase is undergoing oxidation or reduction. The experimental and theoretical methods described here are broadly applicable to in situ measurements of dynamic phase behavior and demonstrate how coherence may be employed for novel studies of the complex oxides as enabled by the arrival of fourth-generation hard x-ray coherent light sources.

7.
J Chem Phys ; 156(5): 054104, 2022 Feb 07.
Artigo em Inglês | MEDLINE | ID: mdl-35135277

RESUMO

We present an efficient energy-based method for structural optimization with stochastic electronic structure theories, such as diffusion quantum Monte Carlo (DMC). This method is based on robust line-search energy minimization in reduced parameter space, exploiting approximate but accurate Hessian information from a surrogate theory, such as density functional theory. The surrogate theory is also used to characterize the potential energy surface, allowing for simple but reliable ways to maximize statistical efficiency while retaining controllable accuracy. We demonstrate the method by finding the minimum DMC energy structures of the selected flake-like aromatic molecules, such as benzene, coronene, and ovalene, represented by 2, 6, and 19 structural parameters, respectively. In each case, the energy minimum is found within two parallel line-search iterations. The method is near-optimal for a line-search technique and suitable for a broad range of applications. It is easily generalized to any electronic structure method where forces and stresses are still under active development and implementation, such as diffusion Monte Carlo, auxiliary-field Monte Carlo, and stochastic configuration interaction, as well as deterministic approaches such as the random-phase approximation. Accurate and efficient means of geometry optimization could shed light on a broad class of materials and molecules, showing high sensitivity of induced properties to structural variables.

8.
J Chem Phys ; 157(5): 054101, 2022 Aug 07.
Artigo em Inglês | MEDLINE | ID: mdl-35933201

RESUMO

We introduce new correlation consistent effective core potentials (ccECPs) for the elements I, Te, Bi, Ag, Au, Pd, Ir, Mo, and W with 4d, 5d, 6s, and 6p valence spaces. These ccECPs are given as a sum of spin-orbit averaged relativistic effective potential (AREP) and effective spin-orbit (SO) terms. The construction involves several steps with increasing refinements from more simple to fully correlated methods. The optimizations are carried out with objective functions that include weighted many-body atomic spectra, norm-conservation criteria, and SO splittings. Transferability tests involve molecular binding curves of corresponding hydride and oxide dimers. The constructed ccECPs are systematically better and in a few cases on par with previous effective core potential (ECP) tables on all tested criteria and provide a significant increase in accuracy for valence-only calculations with these elements. Our study confirms the importance of the AREP part in determining the overall quality of the ECP even in the presence of sizable spin-orbit effects. The subsequent quantum Monte Carlo calculations point out the importance of accurate trial wave functions that, in some cases (mid-series transition elements), require treatment well beyond a single-reference.

9.
J Phys Chem A ; 125(18): 3978-3985, 2021 May 13.
Artigo em Inglês | MEDLINE | ID: mdl-33724850

RESUMO

The mercury dihalides show a remarkable diversity in the structural preferences in their minimum energy structure types, spanning molecular to strongly bound ionic solids. A challenge in the development of density functional methods for extended systems is to arrive at strategies that serve equally well such a broad range of bonding modes or structural preferences. The chemical bonding and the stabilities of mercury dihalides and the general utility and reliability of the van der Waals density functional with C09 exchange (vdW-DF-C09) in predicting or describing the energetics and structural preferences in these metal dihalides is examined. We show that, in contrast with the uncorrected generalized gradient approximation of the Perdew-Burke-Erzenhoff (PBE) exchange-correlation functional, qualitative and quantitative patterns in the bonding of the mercury dihalide solids are well reproduced with vdW-DF-C09 for the full series of HgX2 systems for X = F, Cl, Br, and I. The possible existence of a low-temperature cotunnite polymorph for HgF2 and PbF2 is posited.

10.
J Chem Phys ; 154(20): 204111, 2021 May 28.
Artigo em Inglês | MEDLINE | ID: mdl-34241166

RESUMO

Quantum Monte Carlo (QMC) forces have been studied extensively in recent decades because of their importance with spectroscopic observables and geometry optimization. Here, we benchmark the accuracy and computational cost of QMC forces. The zero-variance zero-bias (ZVZB) force estimator is used in standard variational and diffusion Monte Carlo simulations with mean-field based trial wavefunctions and atomic pseudopotentials. Statistical force uncertainties are obtained with a recently developed regression technique for heavy tailed QMC data [P. Lopez Rios and G. J. Conduit, Phys. Rev. E 99, 063312 (2019)]. By considering selected atoms and dimers with elements ranging from H to Zn (1 ≤ Zeff ≤ 20), we assess the accuracy and the computational cost of ZVZB forces as the effective pseudopotential valence charge, Zeff, increases. We find that the costs of QMC energies and forces approximately follow simple power laws in Zeff. The force uncertainty grows more rapidly, leading to a best case cost scaling relationship of approximately Zeff 6.5(3) for diffusion Monte Carlo. We find that the accessible system size at fixed computational cost scales as Zeff -2, insensitive to model assumptions or the use of the "space warp" variance-reduction technique. Our results predict the practical cost of obtaining forces for a range of materials, such as transition metal oxides where QMC forces have yet to be applied, and underscore the importance of further developing force variance-reduction techniques, particularly for atoms with high Zeff.

11.
J Phys Chem A ; 124(47): 9867-9876, 2020 Nov 25.
Artigo em Inglês | MEDLINE | ID: mdl-33190498

RESUMO

The van der Waals interaction is of foundational importance for a wide variety of physical systems. In particular, van der Waals forces lie at the heart of potential device technologies that may be realized from the functional organization of layered two-dimensional (2D) nanomaterials. For intermediate to large-scale applications modeling, van der Waals density functionals have become the de facto choice for first-principles calculations. In particular, the vdW-DF family of functionals have provided a systematic approach to this theoretically challenging problem. While much progress has been made, there remains room for improvement in the microscopic description of vdW forces from these density functionals. In this work, we compute benchmark results for the binding energy and the electronic density response to binding in TiS2 via accurate diffusion quantum Monte Carlo calculations. We compare these benchmark data to results obtained from local, semilocal, and van der Waals functionals. In particular, we gauge the quality of the original vdW-DF/vdW-DF2 functionals, as well as updated variants such as vdW-DF-C09, vdW-DF-optB88, vdW-DF-optB86b, and vdW-DF2-B86R. We find a close relationship between the accuracy of predicted interlayer separation distances and binding energies for TiS2, with the vdW-DF-optB88 functional performing very well in terms of both quantities. In general, the more recently developed functionals are systematic improvements over older ones. However, when considering the response of the electron density to binding, we find that local-density approximation (LDA) and PBEsol generally outperform the vdW-DF functionals in describing the interlayer charge accumulation with vdW-DF-C09 variants performing the best overall.

12.
J Chem Phys ; 153(10): 104111, 2020 Sep 14.
Artigo em Inglês | MEDLINE | ID: mdl-32933304

RESUMO

An accurate treatment of effective core potentials (ECPs) requires care in continuum quantum Monte Carlo (QMC) methods. While most QMC studies have settled on the use of familiar non-local (NL) pseudopotentials with additional localization approximations, these approaches have been shown to result in moderate residual errors for some classes of molecular and solid state applications. In this work, we revisit an idea proposed early in the history of QMC ECPs that does not require localization approximations, namely, a differential class of potentials referred to as pseudo-Hamiltonians. We propose to hybridize NL potentials and pseudo-Hamiltonians to reduce residual non-locality of existing potentials. We derive an approach to recast pseudopotentials for 3d elements as hybrid pseudo-Hamiltonians with optimally reduced NL energy. We demonstrate the fidelity of the hybrid potentials by studying atomic ionization potentials of Ti and Fe and the binding properties of TiO and FeO molecules with diffusion Monte Carlo (DMC). We show that localization errors have been reduced relative to potentials with the same NL channels for Sc-Zn by considering the DMC energy change with respect to the choice of approximate localization. While localization error decreases proportionate to the reduced NL energy without a Jastrow, with a Jastrow, the degree of reduction decreases at higher filling of the d-shell. Our results suggest that a subset of existing ECPs may be recast in this hybrid form to reduce the DMC localization error. They also point to the prospect of further reducing this error by generating ECPs within this hybrid form from the start.

13.
J Chem Phys ; 153(18): 184111, 2020 Nov 14.
Artigo em Inglês | MEDLINE | ID: mdl-33187421

RESUMO

While Diffusion Monte Carlo (DMC) is in principle an exact stochastic method for ab initio electronic structure calculations, in practice, the fermionic sign problem necessitates the use of the fixed-node approximation and trial wavefunctions with approximate nodes (or zeros). This approximation introduces a variational error in the energy that potentially can be tested and systematically improved. Here, we present a computational method that produces trial wavefunctions with systematically improvable nodes for DMC calculations of periodic solids. These trial wavefunctions are efficiently generated with the configuration interaction using a perturbative selection made iteratively (CIPSI) method. A simple protocol in which both exact and approximate results for finite supercells are used to extrapolate to the thermodynamic limit is introduced. This approach is illustrated in the case of the carbon diamond using Slater-Jastrow trial wavefunctions including up to one million Slater determinants. Fixed-node DMC energies obtained with such large expansions are much improved, and the fixed-node error is found to decrease monotonically and smoothly as a function of the number of determinants in the trial wavefunction, a property opening the way to a better control of this error. The cohesive energy extrapolated to the thermodynamic limit is in close agreement with the estimated experimental value. Interestingly, this is also the case at the single-determinant level, thus, indicating a very good error cancellation in carbon diamond between the bulk and atomic total fixed-node energies when using single-determinant nodes.

14.
J Chem Phys ; 152(17): 174105, 2020 May 07.
Artigo em Inglês | MEDLINE | ID: mdl-32384844

RESUMO

We review recent advances in the capabilities of the open source ab initio Quantum Monte Carlo (QMC) package QMCPACK and the workflow tool Nexus used for greater efficiency and reproducibility. The auxiliary field QMC (AFQMC) implementation has been greatly expanded to include k-point symmetries, tensor-hypercontraction, and accelerated graphical processing unit (GPU) support. These scaling and memory reductions greatly increase the number of orbitals that can practically be included in AFQMC calculations, increasing the accuracy. Advances in real space methods include techniques for accurate computation of bandgaps and for systematically improving the nodal surface of ground state wavefunctions. Results of these calculations can be used to validate application of more approximate electronic structure methods, including GW and density functional based techniques. To provide an improved foundation for these calculations, we utilize a new set of correlation-consistent effective core potentials (pseudopotentials) that are more accurate than previous sets; these can also be applied in quantum-chemical and other many-body applications, not only QMC. These advances increase the efficiency, accuracy, and range of properties that can be studied in both molecules and materials with QMC and QMCPACK.

15.
J Chem Phys ; 148(4): 044110, 2018 Jan 28.
Artigo em Inglês | MEDLINE | ID: mdl-29390850

RESUMO

Quantum Monte Carlo calculations of defect properties of transition metal oxides have become feasible in recent years due to increases in computing power. As the system size has grown, availability of on-node memory has become a limiting factor. Saving memory while minimizing computational cost is now a priority. The main growth in memory demand stems from the B-spline representation of the single particle orbitals, especially for heavier elements such as transition metals where semi-core states are present. Despite the associated memory costs, splines are computationally efficient. In this work, we explore alternatives to reduce the memory usage of splined orbitals without significantly affecting numerical fidelity or computational efficiency. We make use of the kinetic energy operator to both classify and smooth the occupied set of orbitals prior to splining. By using a partitioning scheme based on the per-orbital kinetic energy distributions, we show that memory savings of about 50% is possible for select transition metal oxide systems. For production supercells of practical interest, our scheme incurs a performance penalty of less than 5%.

16.
J Chem Phys ; 146(24): 244101, 2017 Jun 28.
Artigo em Inglês | MEDLINE | ID: mdl-28668053

RESUMO

Growth in computational resources has lead to the application of real space diffusion quantum Monte Carlo to increasingly heavy elements. Although generally assumed to be small, we find that when using standard techniques, the pseudopotential localization error can be large, on the order of an electron volt for an isolated cerium atom. We formally show that the localization error can be reduced to zero with improvements to the Jastrow factor alone, and we define a metric of Jastrow sensitivity that may be useful in the design of pseudopotentials. We employ an extrapolation scheme to extract the bare fixed node energy and estimate the localization error in both the locality approximation and the T-moves schemes for the Ce atom in charge states 3+ and 4+. The locality approximation exhibits the lowest Jastrow sensitivity and generally smaller localization errors than T-moves although the locality approximation energy approaches the localization free limit from above/below for the 3+/4+ charge state. We find that energy minimized Jastrow factors including three-body electron-electron-ion terms are the most effective at reducing the localization error for both the locality approximation and T-moves for the case of the Ce atom. Less complex or variance minimized Jastrows are generally less effective. Our results suggest that further improvements to Jastrow factors and trial wavefunction forms may be needed to reduce localization errors to chemical accuracy when medium core pseudopotentials are applied to heavy elements such as Ce.

17.
J Chem Phys ; 147(2): 024102, 2017 Jul 14.
Artigo em Inglês | MEDLINE | ID: mdl-28711049

RESUMO

The necessarily approximate evaluation of non-local pseudopotentials in diffusion Monte Carlo (DMC) introduces localization errors. We estimate these errors for two families of non-local pseudopotentials for the first-row transition metal atoms Sc-Zn using an extrapolation scheme and multideterminant wavefunctions. Sensitivities of the error in the DMC energies to the Jastrow factor are used to estimate the quality of two sets of pseudopotentials with respect to locality error reduction. The locality approximation and T-moves scheme are also compared for accuracy of total energies. After estimating the removal of the locality and T-moves errors, we present the range of fixed-node energies between a single determinant description and a full valence multideterminant complete active space expansion. The results for these pseudopotentials agree with previous findings that the locality approximation is less sensitive to changes in the Jastrow than T-moves yielding more accurate total energies, however not necessarily more accurate energy differences. For both the locality approximation and T-moves, we find decreasing Jastrow sensitivity moving left to right across the series Sc-Zn. The recently generated pseudopotentials of Krogel et al. [Phys. Rev. B 93, 075143 (2016)] reduce the magnitude of the locality error compared with the pseudopotentials of Burkatzki et al. [J. Chem. Phys. 129, 164115 (2008)] by an average estimated 40% using the locality approximation. The estimated locality error is equivalent for both sets of pseudopotentials when T-moves is used. For the Sc-Zn atomic series with these pseudopotentials, and using up to three-body Jastrow factors, our results suggest that the fixed-node error is dominant over the locality error when a single determinant is used.

18.
J Chem Phys ; 147(3): 034701, 2017 Jul 21.
Artigo em Inglês | MEDLINE | ID: mdl-28734312

RESUMO

The equations of state, formation energy, and migration energy barrier of the oxygen vacancy in SrFeO3 and LaFeO3 were calculated with the diffusion quantum Monte Carlo (DMC) method. Calculations were also performed with various Density Functional Theory (DFT) approximations for comparison. DMC reproduces the measured cohesive energies of these materials with errors below 0.23(5) eV and the structural properties within 1% of the experimental values. The DMC formation energies of the oxygen vacancy in SrFeO3 and LaFeO3 under oxygen-rich conditions are 1.3(1) and 6.24(7) eV, respectively. Similar calculations with semi-local DFT approximations for LaFeO3 yielded vacancy formation energies 1.5 eV lower. Comparison of charge density evaluated with DMC and DFT approximations shows that DFT tends to overdelocalize the electrons in defected SrFeO3 and LaFeO3. Calculations with DMC and local density approximation yield similar vacancy migration energy barriers, indicating that steric/electrostatic effects mainly determine migration barriers in these materials.

19.
J Chem Phys ; 147(17): 174703, 2017 Nov 07.
Artigo em Inglês | MEDLINE | ID: mdl-29117688

RESUMO

MnNiO3 is a strongly correlated transition metal oxide that has recently been investigated theoretically for its potential application as an oxygen-evolution photocatalyst. However, there is no experimental report on critical quantities such as the band gap or bulk modulus. Recent theoretical predictions with standard functionals such as LDA+U and HSE show large discrepancies in the band gaps (about 1.23 eV), depending on the nature of the functional used. Hence there is clearly a need for an accurate quantitative prediction of the band gap to gauge its utility as a photocatalyst. In this work, we present a diffusion quantum Monte Carlo study of the bulk properties of MnNiO3 and revisit the synthesis and experimental properties of the compound. We predict quasiparticle band gaps of 2.0(5) eV and 3.8(6) eV for the majority and minority spin channels, respectively, and an equilibrium volume of 92.8 Å3, which compares well to the experimental value of 94.4 Å3. A bulk modulus of 217 GPa is predicted for MnNiO3. We rationalize the difficulty for the formation of ordered ilmenite-type structure with specific sites for Ni and Mn to be potentially due to the formation of antisite defects that form during synthesis, which ultimately affects the physical properties of MnNiO3.

20.
Phys Chem Chem Phys ; 18(27): 18323-35, 2016 Jul 21.
Artigo em Inglês | MEDLINE | ID: mdl-27334262

RESUMO

The Magnéli phase Ti4O7 is an important transition metal oxide with a wide range of applications because of its interplay between charge, spin, and lattice degrees of freedom. At low temperatures, it has non-trivial magnetic states very close in energy, driven by electronic exchange and correlation interactions. We have examined three low-lying states, one ferromagnetic and two antiferromagnetic, and calculated their energies as well as Ti spin moment distributions using highly accurate quantum Monte Carlo methods. We compare our results to those obtained from density functional theory-based methods that include approximate corrections for exchange and correlation. Our results confirm the nature of the states and their ordering in energy, as compared with density-functional theory methods. However, the energy differences and spin distributions differ. A detailed analysis suggests that non-local exchange-correlation functionals, in addition to other approximations such as LDA+U to account for correlations, are needed to simultaneously obtain better estimates for spin moments, distributions, energy differences and energy gaps.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA