Discrete, Cationic Palladium(II)-Oxo Clusters via f-Metal Ion Incorporation and their Macrocyclic Host-Guest Interactions with Sulfonatocalixarenes.

We report on the discovery of the first two examples of cationic palladium(II)-oxo clusters (POCs) containing f-metal ions, [PdII6 O12 M8 {(CH3 )2 AsO2 }16 (H2 O)8 ]4+ (M=CeIV , ThIV ), and their physicochemical characterization in the solid state, in solution and in the gas phase. The molecular structure of the two novel POCs comprises an octahedral {Pd6 O12 }12- core that is capped by eight MIV ions, resulting in a cationic, cubic assembly {Pd6 O12 MIV8 }20+ , which is coordinated by a total of 16 terminal dimethylarsinate and eight water ligands, resulting in the mixed PdII -CeIV /ThIV oxo-clusters [PdII6 O12 M8 {(CH3 )2 AsO2 }16 (H2 O)8 ]4+ (M=Ce, Pd6 Ce8 ; Th, Pd6 Th8 ). We have also studied the formation of host-guest inclusion complexes of Pd6 Ce8 and Pd6 Th8 with anionic 4-sulfocalix[n]arenes (n=4, 6, 8), resulting in the first examples of discrete, enthalpically-driven supramolecular assemblies between large metal-oxo clusters and calixarene-based macrocycles. The POCs were also found to be useful as pre-catalysts for electrocatalytic CO2 -reduction and HCOOH-oxidation.

Enhancement of Activity and Development of Low Pt Content Electrocatalysts for Oxygen Reduction Reaction in Acid Media.

Platinum is a main catalyst for the electroreduction of oxygen, a reaction of primary importance to the technology of low-temperature fuel cells. Due to the high cost of platinum, there is a need to significantly lower its loadings at interfaces. However, then O2-reduction often proceeds at a less positive potential, and produces higher amounts of undesirable H2O2-intermediate. Hybrid supports, which utilize metal oxides (e.g., CeO2, WO3, Ta2O5, Nb2O5, and ZrO2), stabilize Pt and carbon nanostructures and diminish their corrosion while exhibiting high activity toward the four-electron (most efficient) reduction in oxygen. Porosity of carbon supports facilitates dispersion and stability of Pt nanoparticles. Alternatively, the Pt-based bi- and multi-metallic catalysts, including PtM alloys or M-core/Pt-shell nanostructures, where M stands for certain transition metals (e.g., Au, Co, Cu, Ni, and Fe), can be considered. The catalytic efficiency depends on geometric (decrease in Pt-Pt bond distances) and electronic (increase in d-electron vacancy in Pt) factors, in addition to possible metal-support interactions and interfacial structural changes affecting adsorption and activation of O2-molecules. Despite the stabilization of carbons, doping with heteroatoms, such as sulfur, nitrogen, phosphorus, and boron results in the formation of catalytically active centers. Thus, the useful catalysts are likely to be multi-component and multi-functional.

FeIII 48 -Containing 96-Tungsto-16-Phosphate: Synthesis, Structure, Magnetism and Electrochemistry.

The 48-FeIII -containing 96-tungsto-16-phosphate, [FeIII 48 (OH)76 (H2 O)16 (HP2 W12 O48 )8 ]36- (Fe48 ), has been synthesized and structurally characterized. This polyanion comprises eight equivalent {FeIII 6 P2 W12 } units that are linked in an end-on fashion forming a macrocyclic assembly that contains more iron centers than any other polyoxometalate (POM) known to date. The novel Fe48 was synthesized by a simple one-pot reaction of an {Fe22 } coordination complex with the hexalacunary {P2 W12 } POM precursor in water. The title polyanion was characterized by single-crystal XRD, FTIR, TGA, magnetic and electrochemical studies.

Solar-Driven Water Oxidation and Decoupled Hydrogen Production Mediated by an Electron-Coupled-Proton Buffer.

Solar-to-hydrogen photoelectrochemical cells (PECs) have been proposed as a means of converting sunlight into H2 fuel. However, in traditional PECs, the oxygen evolution reaction and the hydrogen evolution reaction are coupled, and so the rate of both of these is limited by the photocurrents that can be generated from the solar flux. This in turn leads to slow rates of gas evolution that favor crossover of H2 into the O2 stream and vice versa, even through ostensibly impermeable membranes such as Nafion. Herein, we show that the use of the electron-coupled-proton buffer (ECPB) H3PMo12O40 allows solar-driven O2 evolution from water to proceed at rates of over 1 mA cm(-2) on WO3 photoanodes without the need for any additional electrochemical bias. No H2 is produced in the PEC, and instead H3PMo12O40 is reduced to H5PMo12O40. If the reduced ECPB is subjected to a separate electrochemical reoxidation, then H2 is produced with full overall Faradaic efficiency.

CO2 electroreduction at bare and Cu-decorated Pd pseudomorphic layers: catalyst tuning by controlled and indirect supporting onto Au(111).

We report here the results of electrochemical studies on CO2 electroreduction at multilayered catalyst composed of the monatomic layer of copper covering palladium overlayers (0.8-10 monolayers) deposited on the well-defined Au(111) surface. These multilayered systems were obtained by successive underpotential deposition steps: Pd on Au(111) as well as Cu on Pd/Au(111). Low index orientation of Au substrate was chosen to compare Pd overlayers with bulk Pd(111), which is known to reduce CO2 to CO adsorbates in acidic solutions. The process of CO2 electroreduction was studied by using classical transient electrochemical methods. Catalytic activity of bare Pd layers was investigated in acidic and neutral solutions. In the latter case, much higher activity of Pd overlayers was observed. The results showed that the palladium layer thickness significantly changed the catalytic activities of both bare Pd overlayers and the one Cu monolayer covered electrodes toward CO2 electroreduction. Results show that catalytic activity can be finely tuned by using the multilayered near-surface-alloy approach.

Assembly of crosslinked oxo-cyanoruthenate and zirconium oxide bilayers: Application in electrocatalytic films based on organically modified silica with templated pores.

Electrochemical deposition of crosslinked oxo-cyanoruthenate, Ru-O/CN-O, from a mixture of RuCl3 and K4Ru(CN)6 is known to yield a film on glassy carbon that promotes oxidations by a combination of electron and oxygen transfer. Layer-by-layer (LbL) deposition of this species and of a film formed by cycling of the electrode potential in a ZrO2 solution systematically increases the number of catalytically active sites of the Ru-O/CN-O on the electrode. The evaluation of the electrocatalytic activity was by cyclic voltammetric oxidation of cysteine at pH 2. Plots of the anodic peak current vs. the square root of scan rate were indicative of linear diffusion control of this oxidation, even in the absence of ZrO2, but the slopes of these linear plots increased with bilayer number, n, of (ZrO2 | Ru-O/CN-O) n . The latter observation is hypothesized to be due to an increased number of active sites for a given geometric electrode area, but proof required further study. To optimize utilization of the catalyst and to provide a size-exclusion characteristic to the electrode, the study was extended to LbL deposition of the composite in 50-nm pores of an organically modified silica film deposited by electrochemically assisted sol-gel processing using surface-bound poly(styrene sulfonate) nanospheres as a templating agent.

Enhanced water splitting at thin film tungsten trioxide photoanodes bearing plasmonic gold-polyoxometalate particles.

Tungsten trioxide (WO3) is one of a few stable semiconductor materials liable to produce solar fuel by photoelectrochemical water splitting. To enhance its visible light conversion efficiency, we incorporated plasmonic gold nanoparticles (Au NPs) derivatized with polyoxometalate (H3PMo12O40) species into WO3. The combined plasmonic and catalytic effect of Au NPs anchored to the WO3 surface resulted in a large increase of water photooxidation currents. Shielding the Au NPs with polyoxometalates appears to be an effective means to avoid formation of recombination centers at the photoanode surface.

Inorganic-organic modular silicon and dye-sensitized solar cells and predicted role of artificial intelligence towards efficient and stable solar chargers based on supercapacitors.

Appropriate and rational management of the energy produced by renewable energy sources is one of the most urgent challenges for the global energy sector. This paper is devoted to the systematic experimental and theoretical studies of a modular solar charger based on silicon and dye-sensitized solar cells as an energy source, and supercapacitor as an energy bank. Using the MathCAD program, I-V characteristics were plotted for both a single cell and a photovoltaic module based on various series-to-parallel connections. To assess the surface quality of the modules, additional tests using a thermal imaging camera were carried out as well. The charging characteristics of the supercapacitor (two series-connected cells with a capacity of 300 F), were determined depending on the parameters of the photovoltaic module as well as considering the influence of the voltage balancing system and control system. The charge, discharge, and recharge characteristics were carefully analyzed to optimize the operating conditions, i.e. the number of photovoltaic cells. To evaluate the stability of parameters with operation time, and their temperature dependence (17-65 °C), solar modules were tested for ten days under Central European weather conditions. Importantly, a comparative analysis of solar chargers based on different configurations of photovoltaic cells showed an increase in electrical parameters for the proposed modular inorganic-organic concept compared to dye-sensitized solar cells produced alone on a rigid substrate. Finally, preliminary assumptions (requirements) were developed regarding the electrical and optical parameters for new dye-sensitized solar cells that could be used in the innovative solar charger instead of silicon cells along with a predicted role of artificial intelligence (AI) in these devices.

Electrocatalytic oxidation of small organic molecules in acid medium: enhancement of activity of noble metal nanoparticles and their alloys by supporting or modifying them with metal oxides.

Different approaches to enhancement of electrocatalytic activity of noble metal nanoparticles during oxidation of small organic molecules (namely potential fuels for low-temperature fuel cells such as methanol, ethanol and formic acid) are described. A physical approach to the increase of activity of catalytic nanoparticles (e.g. platinum or palladium) involves nanostructuring to obtain highly dispersed systems of high surface area. Recently, the feasibility of enhancing activity of noble metal systems through the formation of bimetallic (e.g. PtRu, PtSn, and PdAu) or even more complex (e.g. PtRuW, PtRuSn) alloys has been demonstrated. In addition to possible changes in the electronic properties of alloys, specific interactions between metals as well as chemical reactivity of the added components have been postulated. We address and emphasize here the possibility of utilization of noble metal and alloyed nanoparticles supported on robust but reactive high surface area metal oxides (e.g. WO3, MoO3, TiO2, ZrO2, V2O5, and CeO2) in oxidative electrocatalysis. This paper concerns the way in which certain inorganic oxides and oxo species can act effectively as supports for noble metal nanoparticles or their alloys during electrocatalytic oxidation of hydrogen and representative organic fuels. Among important issues are possible changes in the morphology and dispersion, as well as specific interactions leading to the improved chemisorptive and catalytic properties in addition to the feasibility of long time operation of the discussed systems.

Electrochemically assisted fabrication of size-exclusion films of organically modified silica and application to the voltammetry of phospholipids.

Modification of electrodes with nm-scale organically modified silica films with pores diameters controlled at 10- and 50-nm is described. An oxidation catalyst, mixed-valence ruthenium oxide with cyano crosslinks or gold nanoparticles protected by dirhodium-substituted phosophomolybdate (AuNP-Rh2PMo11), was immobilized in the pores. These systems comprise size-exclusion films at which the biological compounds, phosphatidylcholine and cardiolipin, were electrocatalytically oxidized without interference from surface-active concomitants such as bovine serum albumin. 10-nm pores were obtained by adding generation-4 poly(amidoamine) dendrimer, G4-PAMAM, to a (CH3)3SiOCH3 sol. 50-nm pores were obtained by modifying a glassy carbon electrode (GC) with a sub-monolayer film of aminopropyltriethoxylsilane, attaching 50-nm diameter poly(styrene sulfonate), PSS, spheres to the protonated amine, transferring this electrode to a (CH3)3SiOCH3 sol, and electrochemically generating hydronium at uncoated GC sites, which catalyzed ormosil growth around the PSS. Voltammetry of Fe(CN)63- and Ru(NH3)63+ demonstrated the absence of residual charge after removal of the templating agents. With the 50-nm system, the pore structure was sufficiently defined to use layer-by-layer electrostatic assembly of AuNP-Rh2PMo11 therein. Flow injection amperometry of phosphatidylcholine and cardiolipin demonstrated analytical utility of these electrodes.

Toward more efficient bioelectrocatalytic oxidation of ethanol for amperometric sensing and biofuel cell technology.

The integrated, structured, and multifunctional bioelectrocatalytic system for effective oxidation of ethanol is developed here. The concept is based on the layer-by-layer (LbL) assembly through electrostatic attraction of positively charged, multiwalled carbon nanotubes and the controlled combination of dehydrogenase enzymes. More specifically, the LbL technique was employed for sequential immobilization of two dehydrogenase enzymes and poly(diallyldimethylammonium chloride)-covered multiwalled carbon nanotubes onto a glassy carbon electrode substrate. Both monoenzymatic [utilizing a single enzyme, alcohol dehydrogenase (ADH)] and bienzymatic (anchoring sequentially both ADH and aldehyde dehydrogenase) systems were tested. Multilayers were characterized using scanning electron microscopy, infrared spectroscopy, and cyclic voltammetry. The results are consistent with the view that our approach enables good control of distribution and efficient utilization of both enzymes within the biocomposite film and leads to sizable enhancement of the oxidation of ethanol through significant (more than 2-fold) increase of bioelectrocatalytic currents and by shifting the ethanol oxidation potential to 0.1 V (vs Ag/AgCl) or decreasing the overvoltage by ca. 200 mV in comparison with the monoenzymatic electrode system. This simple biocomposite (enzyme-cascade) system permits fabrication of highly sensitive ethanol biosensors based on nicotinamide adenine dinucleotide coenzyme-dependent dehydrogenases. Our ethanol biosensor exhibited a good linearity ranging from 50 to 300 µM, and it was characterized by a high sensitivity of 118.8 µA mM(-1) cm(-2) as well as a low detection limit of 24 µM.

Toward Effective CO2 Reduction in an Acid Medium: Electrocatalysis at Cu2O-Derived Polycrystalline Cu Sites Immobilized within the Network of WO3 Nanowires.

A hybrid catalytic system composed of copper (I)-oxide-derived copper nanocenters immobilized within the network of tungsten oxide nanowires has exhibited electrocatalytic activity toward CO2 reduction in an acid medium (0.5 mol dm-3 H2SO4). The catalytic system facilitates conversion of CO2 to methanol and is fairly selective with respect to the competing hydrogen evolution. The preparative procedure has involved voltammetric electroreduction of Cu2O toward the formation and immobilization of catalytic Cu sites within the hexagonal structures of WO3 nanowires which are simultaneously partially reduced to mixed-valence hydrogen tungsten (VI, V) oxide bronzes, H x WO3, coexisting with sub-stoichiometric tungsten (VI, IV) oxides, WO3-y . After the initial loss of Cu through its dissolution to Cu2+ during positive potential scanning up to 1 V (vs RHE), the remaining copper is not electroactive and seems to be trapped within in the network of hexagonal WO3. Using the ultramicroelectrode-based probe, evidence has also been provided that partially reduced nonstoichiometric tungsten oxides induce reduction of CO2 to the CO-type reaction intermediates. The chronocoulometric data are consistent with the view that existence of copper sites dispersed in WO3 improves electron transfers and charge propagation within the hybrid catalytic layer. The enhanced tolerance of the catalyst to the competitive hydrogen evolution during CO2R should be explained in terms of the ability of H x WO3 to consume protons and absorb hydrogen as well as to shift the proton discharge at Cu toward more negative potentials. However, the capacity of WO3 to interact with catalytic copper and to adsorb CO-type reaction intermediates is expected to facilitate removal of the poisoning CO-type adsorbates from Cu sites.

Enhanced oxygen reduction at Pd catalytic nanoparticles dispersed onto heteropolytungstate-assembled poly(diallyldimethylammonium)-functionalized carbon nanotubes.

Both Keggin-type phosphotungstic acid (HPW) and Pd are not prominent catalysts towards the oxygen reduction (ORR), but their composite Pd-HPW catalyst produces a significantly higher electrochemical activity for the ORR in acidic media. The novel composite catalyst was synthesized by self-assembly of HPW on multi-walled carbon nanotubes (MWCNTs) via the electrostatic attraction between negatively charged HPW and positively charged poly(diallyldimethylammonium (PDDA)-wrapped MWCNTs, followed by dispersion of Pd nanoparticles onto the HPW-PDDA-MWCNT assembly. The as-prepared catalyst was characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, thermal gravimetric analysis (TGA), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). TEM images show that Pd nanoparticles were uniformly dispersed on the surface of MWCNTs even when the Pd loading was increased to 60 wt%. Electrochemical activity of the catalysts for the ORR was evaluated by steady state polarization measurements using a rotating disk electrode. Compared with the acid treated MWCNTs, Pd nanoparticles supported on the HPW-assembled MWCNTs show a much higher ORR activity that is comparable to conventional Pt/C catalysts. The high electrocatalytic activities could be related to high dispersion of Pd nanoparticles as well as synergistic effects originating from the high proton conductivity of HPW. The Pd/HPW-PDDA-MWCNTs system as the cathode catalyst in proton exchange membrane fuel cells is demonstrated.

Differences in electrochemical response of prospective anticancer drugs IPBD and Cl-IPBD, doxorubicin and Vitamin C at plasmid modified glassy carbon.

For the comparison of the DNA interactions with drugs, two newly synthesized prospective anticancer drugs, 6-(1H-imidazo[4,5-b]phenasine-2-yl)benzene-1,3-diol (IPBD) and, its -Cl derivative (Cl-IPBD) have been compared with doxorubicin, a drug widely used in medicine, and with Vitamin C. These compounds were accumulated at a supercoiled scpUC19 plasmid layer formed on a glassy carbon electrode (GCE). Stability of the drug-plasmid/GCE layer was achieved by initial plasmid accumulation using prolonged potential cycling for ca. 200 min. from highly diluted scpUC19 solutions (8 pg/mL), followed by accumulation of the drugs from 1 µM - 50 µM. Electrochemical properties in terms of the redox potentials of the compounds and capacitative/resistive characteristics of the layers have been tested using, in sequence, four voltammetric methods: Square Wave (SWV), Differential Pulse (DPV) and Alternating Current (ACV) with phase detection 0° and 90°. Importantly, with progressive drug accumulation in the plasmid, for Cl-IPBD, but not for IPBD, an increase in peak (I) at -0.42 V vs. SCE was observed, while biological tests revealed a higher cytotoxic activity for Cl-IPBD vs. IPBD. Moreover, an additional redox signal of Cl-IPBD was observed with the compound reductive accumulation at the plasmid layer in the presence of Vitamin C.

Visible-light-driven CO2 reduction on dye-sensitized NiO photocathodes decorated with palladium nanoparticles.

The thin-layer-stacked dye-sensitized NiO photocathodes decorated with palladium nanoparticles (nPd) can be used for the visible-light-driven selective reduction of CO2, mostly to CO, at potentials starting as low as 0 V vs. RHE (compared to -0.6 V in the dark for electrocatalysis). The photosensitization of NiO by the organic dye P1, with a surface coverage of 1.5 × 10-8 mol cm-2, allows the hybrid material to absorb light in the 400-650 nm range. In addition, it improves the stability and the catalytic activity of the final material decorated with palladium nanoparticles (nPd). The resulting multi-layered-type photocathode operates according to the electron-transfer-cascade mechanism. On the one hand, the photosensitizer P1 plays a central role as it generates excited-state electrons and transfers them to nPd, thus producing the catalytically active hydride material PdH x . On the other hand, the dispersed nPd, absorb/adsorb hydrogen and accumulate electrons, thus easing the reductive electrocatalysis process by further driving the separation of charges at the photoelectrochemical interface. Surface analysis, morphology, and roughness have been assessed using SEM, EDS, and AFM imaging. Both conventional electrochemical and photoelectrochemical experiments have been performed to confirm the catalytic activity of hybrid photocathodes toward the CO2 reduction. The recorded cathodic photocurrents have been found to be dependent on the loading of Pd nanoparticles. A sufficient amount of loaded catalyst facilitates the electron transfer cascade, making the amount of dye grafted at the surface of the electrode the limiting parameter in catalysis. The formation of CO as the main reaction product is postulated, though the formation of traces of other small organic molecules (e.g. methanol) cannot be excluded.

ABTS-modified multiwalled carbon nanotubes as an effective mediating system for bioelectrocatalytic reduction of oxygen.

The ability of such a common redox mediator as 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) to undergo sorption on carbon surfaces is explored here to convert multiwalled carbon nanotubes (CNTs) into a stable colloidal solution of ABTS-modified carbon nanostructures, the diameters of which are approximately 10 nm (as determined by transmission electron microscopy). Subsequently, inks composed of fungal laccase (Cerrena unicolor) mixed with the dispersion of ABTS-modified CNTs and stabilized with Nafion, were deposited on glassy carbon and successfully employed to the reduction of oxygen in McIlvain buffer at pH 5.2. For comparison, the systems utilizing only ABTS-free CNTs and laccase as well as ABTS-modified CNTs did not show appreciable activity toward the oxygen reduction. The three-dimensionally distributed ABTS-modified CNTs are expected to improve the film's overall conductivity and to facilitate electrical connection between the electrode and the enzyme. The network film of ABTS-modified CNTs is rigid, and it is characterized by charge propagation capabilities comparable to the conventional redox polymers. The whole concept of utilization of CNTs modified with ultrathin films of redox mediators in the preparation of efficient bioelectrocatalytic films seems to be of general importance to electroanalytical chemistry and to the development of biosensors.

15-Copper(ii)-containing 36-tungsto-4-silicates(iv) [Cu15O2(OH)10X(A-α-SiW9O34)4]25- (X = Cl, Br): synthesis, structure, magnetic properties, and electrocatalytic CO2 reduction.

The 15-copper(ii)-containing 36-tungsto-4-silicates [Cu15O2(OH)10X(A-α-SiW9O34)4]25- (X = Cl, 1; Br, 2) have been prepared in 70% yield by reaction of the trilacunary 9-tungstosilicate precursor [A-α-SiW9O34]10- with Cu2+ ions in aqueous pH 8 medium. Both polyanions 1 and 2 were isolated as hydrated mixed potassium/sodium salts and characterized in the solid state by FT-IR, TGA, single-crystal XRD, and elemental analysis. DC magnetic susceptibility measurements from 1.8-300 K established the ground state to be paramagnetic with a magnetic moment corresponding to 15 uncoupled Cu2+ (S = 1/2) ions. EPR measurements and simulations were consistent with this analysis. Electrochemical studies were performed for polyanions 1 and 2 dissolved in solution to elucidate the electroactivity of both copper and tungstate sites. Using 2 as a representative example, the electrocatalytic activity towards CO2 reduction upon deposition on a glassy carbon electrode surface, while retaining selectivity relative to hydrogen evolution, was demonstrated.

Hybrid bioelectrocatalyst for hydrogen peroxide reduction: immobilization of enzyme within organic-inorganic film of structured Prussian Blue and PEDOT.

Fabrication of structured film (on glassy carbon substrate) composed of compact Prussian Blue (that has been prepared by alternate immersions and through assembling within ultra-thin layers of 4(pyrrole-1-yl)-benzoic acid, PPyBA) and poly(3,4-ethylendioxythiophene), PEDOT, is described. This functionalized film has been characterized by fast charge propagation, and it has served as a redox conducting template for permanent attachment of a model enzyme, horseradish peroxidase, HRP. The resulting organic-inorganic system acts as an effective hybrid bioelectrocatalyst for electroreduction of hydrogen peroxide, a model reactant for biosensors and biofuel cells. Among important issues are rigidity, permanence of enzyme attachment, morphology, hydrophilicity, and attractive mediating capabilities of the PEDOT-stabilized Prussian Blue based structured film.

Amperometric detector for gas chromatography based on a silica sol-gel solid electrolyte.

An electrochemical cell comprising a silica sol-gel solid electrolyte, a working electrode that protrudes into a gas phase, and reference and counter electrodes that contact the solid electrolyte comprises an amperometric detector for gas chromatography. Under potentiostatic conditions, a current related to the concentration of an analyte in the gas phase is produced by its oxidation at the three-phase boundary among the sol-gel, working electrode, and the gas phase. The sol-gel is processed to contain an electrolyte that also serves as a humidistat to maintain a constant water activity even in the presence the gas chromatographic mobile phase. Response was demonstrated toward a diverse set of analytes, namely hydrogen, 1,2-ethandithiol, phenol, p-cresol, and thioanisole. Using flow injection amperometry of hydrogen with He as the carrier gas, 90% of the steady-state current was achieved in < 1s at a flow rate of 20mLmin-1. A separation of 1,2-ethandithiol, phenol, p-cresol, and thioanisole at a 2.2mLmin-1 flow rate was achieved with respective detection limits (k = 3 criterion) of 4, 1, 3, and 70 ppmv when the working electrode potential was 800mV.

Polyoxometallates as inorganic templates for electrocatalytic network films of ultra-thin conducting polymers and platinum nanoparticles.

We develop a concept of fabrication of the multilayer network films on electrodes by exploring the ability of a Keggin-type polyoxometallate, phosphododecamolybdate (PMo(12)O(40)(3-)), to form stable anionic monolayers (templates) on carbon and metals including platinum. By repeated alternate treatments in the solution of PMo(12)O(40)(3-) (or in the colloidal suspension of polyoxometallate-protected Pt-nanoparticles) and in the solution of monomer (e.g. anilinium) cations, the amount of the material can be increased systematically (layer-by-layer) to form stable three-dimensional assemblies on electrode (e.g. glassy carbon) surfaces. In the resulting hybrid (organic-inorganic) films, the layers of negatively charged polyoxometallate, or polyoxometallate-protected (stabilized) Pt-nanoparticles, are linked or electrostatically attracted by ultra-thin layers of such positively charged conducting polymers as polyaniline (PANI), polypyrrole (PPy) or poly(3,4-ethylenedioxythiophene), PEDOT. Consequently, the attractive physicochemical properties of polymers and reactivity of polyoxometallate or noble metal particles are combined. The films are functionalized and show electrocatalytic properties towards reduction of nitrite, bromate, hydrogen peroxide or oxygen. They are of importance to the chemical and biochemical sensing as well as to the biochemical and medical applications.