An ITO-Free Kesterite Solar Cell.

Photovoltaic thin film solar cells based on kesterite Cu2 ZnSn(S, Se)4 (CZTSSe) have reached 13.8% sunlight-to-electricity conversion efficiency. However, this efficiency is still far from the Shockley-Queisser radiative limit and is hindered by the significant deficit in open circuit voltage (VOC ). The presence of high-density interface states between the absorber layer and buffer or window layer leads to the recombination of photogenerated carriers, thereby reducing effective carrier collection. To tackle this issue, a new window structure ZnO/AgNW/ZnO/AgNW (ZAZA) comprising layers of ZnO and silver nanowires (AgNWs) is proposed. This structure offers a simple and low-damage processing method, resulting in improved optoelectronic properties and junction quality. The ZAZA-based devices exhibit enhanced VOC due to the higher built-in voltage (Vbi ) and reduced interface recombination compared to the usual indium tin oxide (ITO) based structures. Additionally, improved carrier collection is demonstrated as a result of the shortened collection paths and the more uniform carrier lifetime distribution. These advances enable the fabrication of the first ITO-free CZTSSe solar cells with over 10% efficiency without an anti-reflective coating.

Methods to Visualize Elements in Plants.

Understanding the distribution of elements in plants is important for researchers across a broad range of fields, including plant molecular biology, agronomy, plant physiology, plant nutrition, and ionomics. However, it is often challenging to evaluate the applicability of the wide range of techniques available, with each having its own strengths and limitations. Here, we compare scanning/transmission electron microscopy-based energy-dispersive x-ray spectroscopy, x-ray fluorescence microscopy, particle-induced x-ray emission, laser ablation inductively coupled plasma-mass spectrometry, nanoscale secondary ion mass spectroscopy, autoradiography, and confocal microscopy with fluorophores. For these various techniques, we compare their accessibility, their ability to analyze hydrated tissues (without sample preparation) and suitability for in vivo analyses, as well as examining their most important analytical merits, such as resolution, sensitivity, depth of analysis, and the range of elements that can be analyzed. We hope that this information will assist other researchers to select, access, and evaluate the approach that is most useful in their particular research program or application.

Rare earth elements, aluminium and silicon distribution in the fern Dicranopteris linearis revealed by µPIXE Maia analysis.

BACKGROUND: The fern Dicranopteris linearis is a hyperaccumulator of rare earth elements (REEs), aluminium (Al) and silicon (Si). However, the physiological mechanisms of tissue-level tolerance of high concentrations of REE and Al, and possible interactions with Si, are currently incompletely known. METHODS: A particle-induced X-ray emission (µPIXE) microprobe with the Maia detector, scanning electron microscopy with energy-dispersive spectroscopy and chemical speciation modelling were used to decipher the localization and biochemistry of REEs, Al and Si in D. linearis during uptake, translocation and sequestration processes. RESULTS: In the roots >80 % of REEs and Al were in apoplastic fractions, among which the REEs were most significantly co-localized with Si and phosphorus (P) in the epidermis. In the xylem sap, REEs were nearly 100 % present as REEH3SiO42+, without significant differences between the REEs, while 24-45 % of Al was present as Al-citrate and only 1.7-16 % Al was present as AlH3SiO42+. In the pinnules, REEs were mainly concentrated in necrotic lesions and in the epidermis, and REEs and Al were possibly co-deposited within phytoliths (SiO2). Different REEs had similar spatial localizations in the epidermis and exodermis of roots, the necrosis, veins and epidermis of pinnae of D. linearis. CONCLUSIONS: We posit that Si plays a critical role in REE and Al tolerance within the root apoplast, transport within the vascular bundle and sequestration within the blade of D. linearis.

Highly luminescent metal-organic frameworks through quantum dot doping.

The incorporation of highly luminescent core-shell quantum dots (QDs) within a metal-organic framework (MOF) is achieved through a one-pot method. Through appropriate surface functionalization, the QDs are solubilized within MOF-5 growth media. This permits the incorporation of the QDs within the evolving framework during the reaction. The resulting QD@MOF-5 composites are characterized using X-ray fluorescence, cross-sectional confocal microscopy, energy-dispersive X-ray spectroscopy, scanning electron microscopy, and small-angle X-ray scattering. The synergistic combination of luminescent QDs and the controlled porosity of MOF-5 in the QD@MOF-5 composites is harnessed within a prototype molecular sensor that can discriminate on the basis of molecular size.

Intensity Modulated Photocurrent Microspectrosopy for Next Generation Photovoltaics.

In this report, a large-area laser beam induced current microscope that has been adapted to perform intensity modulated photocurrent spectroscopy (IMPS) in an imaging mode is described. Microscopy-based IMPS method provides a spatial resolution of the frequency domain response of the solar cell, allowing correlation of the optoelectronic response with a particular interface, bulk material, specific transport layer, or transport parameter. The system is applied to study degradation effects in back-contact perovskite cells where it is found to readily differentiate areas based on their markedly different frequency response. Using the diffusion-recombination model, the IMPS response is modeled for a sandwich structure and extended for the special case of lateral diffusion in a back-contact cell. In the low-frequency limit, the model is used to calculate spatial maps of the carrier ambipolar diffusion length. The observed frequency response of IMPS images is then discussed.

Biomolecular modifications in the sacfry of Mogurnda adspersa in response to copper stress.

Copper (Cu) is one of the most harmful contaminants in fresh-water systems. Fish larvae such as sacfry are particularly vulnerable to metals such as copper (Cu) due to a less-developed excretory organ system and permeable skin that can absorb metals directly from the water. However, the sublethal effects of metals on this life stage are not well understood. This study assessed the sublethal toxicity of Cu on purple-spotted gudgeon sacfry (PSG, Mogurnda adspersa). For this purpose, 96 h Cu toxicity bioassays were performed and toxic effects of Cu on PSG were measured at different levels of biological organization, from the individual (loss of equilibrium, wet weight), to tissue (chemical changes in retinal tissue composition) and molecular responses (whole body amino acid (AA) profiles). The EC10 and EC50 (ECx: effect concentration that affected X% of test organisms) were found to be 12 (9 - 15) µg Cu L-1 and 22 (19 - 24) µg Cu L-1, respectively. Copper stress caused a decrease in total amino acid content and changed the AA profile of PSG compared to the controls. Proton-induced X-ray emission (PIXE) mapping techniques showed accumulation of Cu in the retinal tissues disturbing the distribution of other elements such as zinc, sulfur, phosphorus and potassium. Fourier-transform infrared (FTIR) microspectroscopy of control and Cu treated eye tissues revealed a change in protein secondary structure in retinal tissues in response to Cu accumulation, as well as decreased levels of the molecular retinal, consistent with the degradation of rhodopsin, a key protein in the visual sensory system. This is the first study to demonstrate the multi-level responses of PSG arising from exposure to environmentally realistic Cu concentrations and suggests that AA profiling can serve as a useful tool to assess the impacts of metals on fresh-water organisms.

Evaluation of the Total Mercury Weight Exposure Distribution Using Tree Bark Analysis in an Artisanal and Small-Scale Gold Mining Area, North Gorontalo Regency, Gorontalo Province, Indonesia.

It is well known that atmospheric mercury (Hg) contaminates air, water, soil, and living organisms, including trees. Therefore, tree bark can be used for the environmental assessment of atmospheric contamination because it absorbs heavy metals. This study aimed to establish a new biomonitoring for the assessment of atmospheric Hg pollution. Reporting on atmospheric Hg contamination in an artisanal and small-scale gold mining (ASGM) area in North Gorontalo, Indonesia, we calculated the total weight of Hg (THg) and quantitatively measured the concentrations of Hg in the tree bark of Mangifera indica, Syzygium aromaticum, Terminalia catappa, and Lansium domesticum. The THg of Hg in the M. indica tree bark samples ranged from not detected (ND) to 74.6 µg dry weight (DW) per sample. The total Hg in the tree bark of S. aromaticum, T. catappa, and L. domesticum ranged from ND to 156.8, ND to 180, and ND to 63.4 µg DW, respectively. We concluded that topography significantly influences the accumulation of Hg together with local weather conditions. A mapped distribution of the THg suggested that the distribution of THg in the tree bark was not affected by the distance to the amalgamation site. Therefore, tree bark can be used as biomonitoring of atmospheric Hg contamination for the assessment of ASGM areas.

Distribution of metals in the termite Tumulitermes tumuli (Froggatt): two types of Malpighian tubule concretion host Zn and Ca mutually exclusively.

The aim of this study was to determine specific distribution of metals in the termite Tumulitermes tumuli (Froggatt) and identify specific organs within the termite that host elevated metals and therefore play an important role in the regulation and transfer of these back into the environment. Like other insects, termites bio-accumulate essential metals to reinforce cuticular structures and utilize storage detoxification for other metals including Ca, P, Mg and K. Previously, Mn and Zn have been found concentrated in mandible tips and are associated with increased hardness whereas Ca, P, Mg and K are accumulated in Malpighian tubules. Using high resolution Particle Induced X-Ray Emission (PIXE) mapping of whole termites and Scanning Electron Microscope (SEM) Energy Dispersive X-ray (EDX) spot analysis, localised accumulations of metals in the termite T. tumuli were identified. Tumulitermes tumuli was found to have proportionally high Mn concentrations in mandible tips. Malpighian tubules had significant enrichment of Zn (1.6%), Mg (4.9%), P (6.8%), Ca (2.7%) and K (2.4%). Synchrotron scanning X-ray Fluorescence Microprobe (XFM) mapping demonstrated two different concretion types defined by the mutually exclusive presence of Ca and Zn. In-situ SEM EDX realisation of these concretions is problematic due to the excitation volume caused by operating conditions required to detect minor amounts of Zn in the presence of significant amounts of Na. For this reason, previous researchers have not demonstrated this surprising finding.

Scanning picosecond tunable laser system for simulating MeV heavy ion-induced charge collection events as a function of temperature.

A new methodology for using scanning picosecond laser microscopy to simulate cosmic ray induced radiation effects as a function of temperature is described in detail. The built system is centered on diffraction-limited focusing of the output from a broadband (690-960 nm) ultrafast Ti:sapphire Tsunami laser pumped by a 532 nm Millennia laser. An acousto-optic modulator is used to provide pulse picking down to event rates necessary for the technologies and effects under study. The temperature dependence of the charge generation process for ions and photons is briefly reviewed and the need for wavelength tunability is discussed. An appropriate wavelength selection is critical for proper emulation of ion events over a wide temperature range. The system developed is detailed and illustrated by way of example on a deep-submicron complementary metal-oxide semiconductor test structure.