Preparation and characterization of a novel highly hydrophilic and antifouling polysulfone/nanoporous TiO2 nanocomposite membrane.

In this research, novel ultrafiltration nanocomposite membranes were prepared by incorporating self-synthesized nanoporous titanium dioxide (NTiO2) nanoparticles into polysulfone. The surface of the nanoparticle was treated with a silane-based modifier to improve its distribution in the host polymer. Atomic-force microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller, transmission electron microscopy, energy-dispersive x-ray spectroscopy, porosity and contact angle tests were conducted to characterize the properties of the particles as well as the fabricated nanocomposite membranes. The effects of the nanoparticle incorporation were evaluated by conducting ultrafiltration experiments. It was reported that the membrane pure water flux was increased with increasing NTiO2 loading owing to the high porosity of the nanoparticles embedded and/or formation of enlarged pores upon addition of them. The antifouling capacity of the membranes was also tested by ultrafiltration of bovine serum albumin fouling solution. It was found that both water flux and antifouling capacity tended to reach desired level if the NTiO2 added was at optimized loading.

Solvothermal synthesis of nanoporous TiO2: the impact on thin-film composite membranes for engineered osmosis application.

In the current study, the impact of self-synthesized nanoporous titanium oxide (NT) on the morphology, performance and fouling of a polyamide (PA) thin-film composite (TFC) membrane was investigated when the membrane was applied for engineering osmosis (EO). The nanoporous structure and the spindle-like shape of NT were revealed through transmission electron microscopy (TEM), while the AATPS modification of NT was verified by attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy. The results of x-ray photoelectron spectroscopy (XPS) and x-ray diffraction (XRD) confirmed the presence of modified NT (mNT) in the PA dense active layer of the TFC membrane. The outgrowth of the 'leaf-like' structure, upon mNT loading, at the surface of the PA layer was observed by field-emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). The TFC membrane prepared with 0.05 wt% mNT loading in the organic phase showed the water flux of 26.4 l m(-2) h(-1) when tested in the forward osmosis (FO) mode using 0.5M and 10 mM NaCl solution as the draw and feed solution, respectively. Moreover, the TFC-mNT membrane also demonstrated an intensified antifouling property against organic foulant during FO application and it was possible to retrieve the initial water flux almost completely with a simple water-rinsing process.

The state-of-the-art development of photocatalysts for the degradation of persistent herbicides in wastewater.

Herbicides are one of the most recurring pollutants in the aquatic system due to their widespread usage in the agriculture sector for weed control. Semiconductor-based photocatalysts have gained recognition due to their ability to degrade and mineralize pollutants into harmless by-products completely. Lately, many studies have been done to design photocatalysts with efficient separation of photogenerated charge carriers and enhanced light absorption. Photocatalyst engineering through doping with metal and non-metal elements and the formation of heterojunction are proven effective for minimizing the recombination of electron-hole pairs and enlarging the absorption in the visible light region. This review focuses on discussing and evaluating the recent progress in the types of photocatalysts and their performance in the remediation of herbicides in wastewater. The development of innovative hybrid technologies is also highlighted. The limitations and challenges of photocatalysis technology in the present literature have been identified, and future studies are recommended.

Surface modification of thin film composite membrane by nanoporous titanate nanoparticles for improving combined organic and inorganic antifouling properties.

In this study, nanoporous titanate (NT) nanoparticle synthesized by the solvothermal method was used to modify polyamide layer of thin film composite membranes with the aim of improving membrane resistances against organic and inorganic fouling. Thin film nanocomposite membranes (NMs) were synthesized by adding mNTs (modified nanoparticles) into polyamide selective layer followed by characterization using different analytical instruments. The results of XPS and XRD confirmed the presence of mNTs in the polyamide layer of NMs, while FESEM, AFM, zeta potential and contact angle measurement further supported the changes in physical and chemical properties of the membrane surface upon mNTs incorporation. Results of fouling showed that NM1 (the membrane incorporated with 0.01w/v% mNTs) always demonstrated lower degree of flux decline compared to the control membrane when membranes were tested with organic, inorganic and multicomponent synthesized water, brackish water or seawater. Besides showing greater antifouling resistance, the NM also displayed significantly higher water flux compared to the control M membrane. The findings of this work confirmed the positive impact of mNTs in improving the properties of NM with respect to fouling mitigation and flux improvement.

A review on polyamide thin film nanocomposite (TFN) membranes: History, applications, challenges and approaches.

This review focuses on the development of polyamide (PA) thin film nanocomposite (TFN) membranes for various aqueous media-based separation processes such as nanofiltration, reverse osmosis and forward osmosis since the concept of TFN was introduced in year 2007. Although the total number of published TFN articles falls far short of the articles of the well-known thin film composite (TFC) membranes, its growth rate is significant, particularly since 2012. Generally, by incorporating an appropriate amount of nanofiller into a thin selective PA layer of a composite membrane, one could produce TFN membranes with enhanced separation characteristics as compared to the conventional TFC membrane. For certain cases, the resulting TFN membranes demonstrate not only excellent antifouling resistance and/or greater antibacterial effect, but also possibly overcome the trade-off effect between water permeability and solute selectivity. Furthermore, this review attempts to give the readers insights into the difficulties of incorporating inorganic nanomaterials into the organic PA layer whose thickness usually falls in a range of several-hundred nanometers. It is also intended to show new possible approaches to overcome these challenges in TFN membrane fabrication.

[A preliminary report on two distinct tumor-suppressor regions on chromosome 1p36.2-p36.3 in human hepatocellular carcinomas].

OBJECTIVE: Both cytogenetic and molecular genetic analyses have unveiled non-random genomic alterations in the distal short arm of human chromosome 1 associated with a number of human malignancies including heptatocellular carcinoma (HCC). The aim of this investigation is to determine the precise region of deletion that may harbor the putative tumor suppressor genes in HCC. METHODS: For the study of the loss of heterozygosity (LOH), 38 cases of hepatitis B virus (HBV) associated HCC and their corresponding non-tumor liver tissues were detected with 43 microsatellite polymorphic markers particularly focusing on 1p. RESULTS: Twenty-eight of the 38 (74%) tumors showed LOH on at least one locus on 1p36.2-p36.3. Two distinct smallest common deleted regions (SCDRs) with different patterns of deletion were identified. The first SCDR is located on locus D1S2795 at 1p36.3, between loci D1S2145 and D1S2893. The second SCDR is located at 1p36.2, between loci D1S244 and D1S489. Both of the SCDRs have not been previously described in HCC. In addition, a region of possible homozygous deletion (HD) was also detected within the second SCDR between loci D1S1597 and D1S489 by comparative multiplex PCR. This is the first observation of a possible homozygous deletion on the distal short arm of chromosome 1 in HCC as well as in human tumors. CONCLUSIONS: The high-resolution deletion mapping of 1p36.2-p36.3 in HCC in this study confirmed the presence of two distinct regions of deletion. Our data strongly suggest the presence of at least two tumor suppressor regions on 1p36.2-p36.3 and play an important role in the pathogenesis of HBV associated HCC. These results also provide a basis for further studies directed at cloning potential tumor suppressor genes in these regions.