Ultrafast photo-induced carrier dynamics of perovskite quantum dots during structural degradation.

In this study, the ultrafast photo-induced carrier dynamics of red-emitting PQDs during structural degradation was investigated using time-resolved transient absorption spectroscopy. The spectroscopic analysis revealed how the carrier dynamics varied when PQDs were exposed to a polar solvent. Three decay modes (carrier trapping, radiative carrier recombination and trap-assisted non-radiative recombination) were proposed to analyze the carrier dynamics of PQDs. The light-emitting property of PQDs is primarily influenced by radiative carrier recombination. This study demonstrates that structural degradation induced halide migration within PQDs and the formation of defects within the crystal lattice, leading to a proliferation of carrier trapping states. The increased trap states led to a reduction in carriers undergoing radiative carrier recombination. Additionally, PQDs degradation accelerated radiative carrier recombination, indicating a faster escape of carriers from excited states. Consequently, these factors hinder carriers remaining in excited states, leading to a decline in the light-emitting property of PQDs. Nevertheless, increasing an excitation fluence could reduce the carrier trapping mode and increase the radiative carrier recombination mode, suggesting a diminishment of the impact of carrier trapping. These findings offer a more comprehensive understanding of structural degradation of PQDs and can contribute to the development of PQDs with high structural stability.

Disordered-Layer-Mediated Reverse Metal-Oxide Interactions for Enhanced Photocatalytic Water Splitting.

In heterogeneous catalysts, metal-oxide interactions occur spontaneously but often in an undesired way leading to the oxidation of metal nanoparticles. Manipulating such interactions to produce highly active surface of metal nanoparticles can warrant the optimal catalytic activity but has not been established to date. Here we report that a prior reduced TiO2 support can reverse the interaction with Pt nanoparticles and augment the metallic state of Pt, exhibiting a 3-fold increase in hydrogen production rate compared to that of conventional Pt/TiO2. Spatially resolved electron energy loss spectroscopy of the Ti valence state and the electron density distribution within Pt nanoparticles provide direct evidence supporting that the Pt/TiO2/H2O triple junctions are the most active catalytic sites for water reduction. Our reverse metal-oxide interaction scheme provides a breakthrough in the stagnated hydrogen production efficiency and can be applied to other heterogeneous catalyst systems composed of metal nanoparticles with reducible oxide supports.

Determination of complex dielectric function of CH3NH3PbBr3 perovskite cubic colloidal quantum dots by modified iterative matrix inversion method.

Recent advances in lead halide perovskite quantum dots appeal with their potential in various optoelectronic devices such as photovoltaics, photodetectors, light-emitting diodes (LEDs) and lasers. However, lack of information on the intrinsic optical properties of lead halide perovskite quantum dots (QDs) lags the progress in device performances and further development in various applications. In this letter, the complex dielectric function of CH3NH3PbBr3 perovskite cubic colloidal QDs was determined from the UV-Vis absorption by using a modified iterative matrix inversion (IMI) method. The modified IMI method takes into account the dilute solution with cubic inclusions, while the conventional method only considers spherical or elliptical inclusions by Maxwell-Garnett (MG) effective medium theory. In addition, singly subtractive Kramer Kronig (SSKK) relations have also been considered to compensate for possible errors arising from the finite wavelength range of the experimental absorption data.

Multiple Heterojunction in Single Titanium Dioxide Nanoparticles for Novel Metal-Free Photocatalysis.

Despite a longstanding controversy surrounding TiO2 materials, TiO2 polymorphs with heterojunctions composed of anatase and rutile outperform individual polymorphs because of the type-II energetic band alignment at the heterojunction interface. Improvement in photocatalysis has also been achieved via black TiO2 with a thin disorder layer surrounding ordered TiO2. However, localization of this disorder layer in a conventional single TiO2 nanoparticle with the heterojunction composed of anatase and rutile has remained a big challenge. Here, we report the selective positioning of a disorder layer of controlled thicknesses between the anatase and rutile phases by a conceptually different synthetic route to access highly efficient novel metal-free photocatalysis for H2 production. The presence of a localized disorder layer within a single TiO2 nanoparticle was confirmed for the first time by high-resolution transmission electron microscopy with electron energy-loss spectroscopy and inline electron holography. Multiple heterojunctions in single TiO2 nanoparticles composed of crystalline anatase/disordered rutile/ordered rutile layers give the nanoparticles superior electron/hole separation efficiency and novel metal-free surface reactivity, which concomitantly yields an H2 production rate that is ∼11-times higher than that of Pt-decorated conventional anatase and rutile single heterojunction TiO2 systems.

Fluorescent Molecular Rotors for Viscosity Sensors.

Fluorescent molecular rotors (FMRs) can act as viscosity sensors in various media including subcellular organelles and microfluidic channels. In FMRs, the rotation of rotators connected to a fluorescent π-conjugated bridge is suppressed by increasing environmental viscosity, resulting in increasing fluorescence (FL) intensity. In this minireview, we describe recently developed FMRs including push-pull type π-conjugated chromophores, meso-phenyl (borondipyrromethene) (BODIPY) derivatives, dioxaborine derivatives, cyanine derivatives, and porphyrin derivatives whose FL mechanism is viscosity-responsive. In addition, FMR design strategies for addressing various issues (e.g., obtaining high FL contrast, internal FL references, and FL intensity-contrast trade-off) and their biological and microfluidic applications are also discussed.

Molecular Viscosity Sensors with Two Rotators for Optimizing the Fluorescence Intensity-Contrast Trade-Off.

A series of fluorescent molecular rotors obtained by introducing two rotational groups ("rotators"), which exhibit different rotational and electron-donating abilities, are discussed. Whereas the control molecular rotor, PH, includes a single rotator (the widely used phenyl group), the PO molecular rotors consist of two rotators (a phenyl group and an alkoxy group), which exhibit simultaneous strongly electron-donating and easy rotational abilities. Compared with the control rotor PH, PO molecular rotors exhibited one order of magnitude higher quantum yield (fluorescence intensity) and simultaneously exhibited significantly higher fluorescence contrast. These properties are directly related to the strong electron-donating ability and low energy barrier of rotation of the alkoxy group, as confirmed by dynamic fluorescence experiments and quantum chemical calculations. The PO molecular rotors exhibited two fluorescence relaxation pathways, whereas the PH molecular rotor exhibited a single fluorescence relaxation pathway. Cellular fluorescence imaging with PO molecular rotors for mapping cellular viscosity was successfully demonstrated.

Defect-Induced Epitaxial Growth for Efficient Solar Hydrogen Production.

Epitaxial growth suffers from the mismatches in lattice and dangling bonds arising from different crystal structures or unit cell parameters. Here, we demonstrate the epitaxial growth of 2D MoS2 ribbon on 1D CdS nanowires (NWs) via surface and subsurface defects. The interstitial Cd0 in the (12̅10) crystal plane of the [0001]-oriented CdS NWs are found to serve as nucleation sites for interatomically bonded [001]-oriented MoS2, where the perfect lattice match (∼99.7%) between the (101̅1) plane of CdS and the (002)-faceted in-plane MoS2 result in coaxial MoS2 ribbon/CdS NWs heterojunction. The coaxial but heterotropic epitaxial MoS2 ribbon on the surface of CdS NWs induces delocalized interface states that facilitate charge transport and the reduced surface state. A less than 5-fold ribbon width of MoS2 as hydrogen evolution cocatalyst exhibits a ∼10-fold H2 evolution enhancement than state of the art Pt in an acidic electrolyte, and apparent quantum yields of 79.7% at 420 nm, 53.1% at 450 nm, and 9.67% at 520 nm, respectively.

Highly emissive 'frozen-in' conjugated polymer nanofibers.

Conjugated-polymer nanofibers with a thermodynamically stable, coarsened, disordered structure in an amorphous glassy state were fabricated via a freeze-drying method using a poly(diphenylacetylene) derivative. The nanofibers were extremely emissive, with a fluorescence (FL) quantum yield of approximately 0.34, which was much higher than that of both the cast film (0.02) and the solution (0.21). Similarly, the amplitude-weighted average FL lifetime of the nanofibers was 0.74 ns, which was much longer than that of the film (0.29 ns) and the solution (0.57 ns). This unusual and enhanced FL-emission behavior was attributed to the abruptly quenched chain structure that was created by the freeze-drying process. The polymer chains in the nanofibers remained frozen-in and the side phenyl rings were retained in a relaxed state. The metastable chains did not undergo vibrational relaxation and collisional quenching to generate the radiative emission decay effectively.

pH-Responsive assembly of metal nanoparticles and fluorescent dyes by diblock copolymer micelles.

Hybrid assemblies consisting of metal nanoparticles (NPs) and fluorophores are quite interesting because the intrinsic properties of fluorophores can be engineered in the assembled structure. In this regard, we utilized the self-segregation properties of block copolymer micelles to organize metal NPs and fluorophores simultaneously in a specific arrangement. From the viewpoint of assembly methods, we first encapsulated Au NPs in the PS cores of polystyrene-block-poly(acrylic acid) (PS-PAA) micelles. Then, positively charged fluorescent dyes of rhodamine 123 (R123) were bound to the negatively charged PAA coronas by electrostatic interactions. Since carboxylic acid in the PAA block is a weak acid, the degree of R123 binding to PS-PAA micelles can be adjusted by varying the pH of the solution. Therefore, by changing the pH, we were able to control the assembly and disassembly of R123 molecules to PS-PAA micelles and the corresponding change in the fluorescence signal.

Electroluminescence from graphene quantum dots prepared by amidative cutting of tattered graphite.

Size-controlled graphene quantum dots (GQDs) are prepared via amidative cutting of tattered graphite. The power of this method is that the size of the GQDs could be varied from 2 to over 10 nm by simply regulating the amine concentration. The energy gaps in such GQDs are narrowed down with increasing their size, showing colorful photoluminescence from blue to brown. We also reveal the roles of defect sites in photoluminescence, developing long-wavelength emission and reducing exciton lifetime. To assess the viability of the present method, organic light-emitting diodes employing our GQDs as a dopant are first demonstrated with the thorough studies in their energy levels. This is to our best knowledge the first meaningful report on the electroluminescence of GQDs, successfully rendering white light with the external quantum efficiency of ca. 0.1%.