Cathode Electrolyte Interphase Engineering for Prussian Blue Analogues in Lithium-Ion Batteries.

The increasing use of low-cost lithium iron phosphate cathodes in low-end electric vehicles has sparked interest in Prussian blue analogues (PBAs) for lithium-ion batteries. A major challenge with iron hexacyanoferrate (FeHCFe), particularly in lithium-ion systems, is its slow kinetics in organic electrolytes and valence state inactivation in aqueous ones. We have addressed these issues by developing a polymeric cathode electrolyte interphase (CEI) layer through a ring-opening reaction of ethylene carbonate triggered by OH- radicals from structural water. This facile approach considerably mitigates the sluggish electrochemical kinetics typically observed in organic electrolytes. As a result, FeHCFe has achieved a specific capacity of 125 mAh g-1 with a stable lifetime over 500 cycles, thanks to the effective activation of Fe low-spin states and the structural integrity of the CEI layers. These advancements shed light on the potential of PBAs to be viable, durable, and efficient cathode materials for commercial use.

Design Principles for Fluorinated Interphase Evolution via Conversion-Type Alloying Processes for Anticorrosive Lithium Metal Anodes.

Over the past decade, lithium metal has been considered the most attractive anode material for high-energy-density batteries. However, its practical application has been hindered by its high reactivity with organic electrolytes and uncontrolled dendritic growth, resulting in poor Coulombic efficiency and cycle life. In this paper, we propose a design strategy for interface engineering using a conversion-type reaction of metal fluorides to evolve a LiF passivation layer and Li-M alloy. Particularly, we propose a LiF-modified Li-Mg-C electrode, which demonstrates stable long-term cycling for over 2000 h in common organic electrolytes with fluoroethylene carbonate (FEC) additives and over 700 h even without additives, suppressing unwanted side reactions and Li dendritic growth. With the help of phase diagrams, we found that solid-solution-based alloying not only facilitates the spontaneous evolution of a LiF layer and bulk alloy but also enables reversible Li plating/stripping inward to the bulk, compared with intermetallic compounds with finite Li solubility.

The proximal tubule through an NBCe1-dependent mechanism regulates collecting duct phenotypic and remodeling responses to acidosis.

The renal response to acid-base disturbances involves phenotypic and remodeling changes in the collecting duct. This study examines whether the proximal tubule controls these responses. We examined mice with genetic deletion of proteins present only in the proximal tubule, either the A variant or both A and B variants of isoform 1 of the electrogenic Na+-bicarbonate cotransporter (NBCe1). Both knockout (KO) mice have spontaneous metabolic acidosis. We then determined the collecting duct phenotypic responses to this acidosis and the remodeling responses to exogenous acid loading. Despite the spontaneous acidosis in NBCe1-A KO mice, type A intercalated cells in the inner stripe of the outer medullary collecting duct (OMCDis) exhibited decreased height and reduced expression of H+-ATPase, anion exchanger 1, Rhesus B glycoprotein, and Rhesus C glycoprotein. Combined kidney-specific NBCe1-A/B deletion induced similar changes. Ultrastructural imaging showed decreased apical plasma membrane and increased vesicular H+-ATPase in OMCDis type A intercalated cell in NBCe1-A KO mice. Next, we examined the collecting duct remodeling response to acidosis. In wild-type mice, acid loading increased the proportion of type A intercalated cells in the connecting tubule (CNT) and OMCDis, and it decreased the proportion of non-A, non-B intercalated cells in the connecting tubule, and type B intercalated cells in the cortical collecting duct (CCD). These changes were absent in NBCe1-A KO mice. We conclude that the collecting duct phenotypic and remodeling responses depend on proximal tubule-dependent signaling mechanisms blocked by constitutive deletion of proximal tubule NBCe1 proteins.NEW & NOTEWORTHY This study shows that the proximal tubule regulates collecting duct phenotypic and remodeling responses to acidosis.

Selectively Enhanced Electrocatalytic Oxygen Evolution within Nanoscopic Channels Fitting a Specific Reaction Intermediate for Seawater Splitting.

Abundant availability of seawater grants economic and resource-rich benefits to water electrolysis technology requiring high-purity water if undesired reactions such as chlorine evolution reaction (CER) competitive to oxygen evolution reaction (OER) are suppressed. Inspired by a conceptual computational work suggesting that OER is kinetically improved via a double activation within 7 Å-gap nanochannels, RuO2 catalysts are realized to have nanoscopic channels at 7, 11, and 14 Å gap in average (dgap ), and preferential activity improvement of OER over CER in seawater by using nanochanneled RuO2 is demonstrated. When the channels are developed to have 7 Å gap, the OER current is maximized with the overpotential required for triggering OER minimized. The gap value guaranteeing the highest OER activity is identical to the value expected from the computational work. The improved OER activity significantly increases the selectivity of OER over CER in seawater since the double activation by the 7 Å-nanoconfined environments to allow an OER intermediate (*OOH) to be doubly anchored to Ru and O active sites does not work on the CER intermediate (*Cl). Successful operation of direct seawater electrolysis with improved hydrogen production is demonstrated by employing the 7 Å-nanochanneled RuO2 as the OER electrocatalyst.

Nickel-induced transcriptional memory in lung epithelial cells promotes interferon signaling upon nicotine exposure.

Exposure to nickel, an environmental respiratory toxicant, is associated with lung diseases including asthma, pulmonary fibrosis, bronchitis and cancers. Our previous studies have shown that a majority of the nickel-induced transcriptional changes are persistent and do not reverse even after the termination of exposure. This suggested transcriptional memory, wherein the cell 'remembers' past nickel exposure. Transcriptional memory, due to which the cells respond more robustly to a previously encountered stimulus has been identified in a number of organisms. Therefore, transcriptional memory has been described as an adaptive mechanism. However, transcriptional memory caused by environmental toxicant exposures has not been well investigated. Moreover, how the transcriptional memory caused by an environmental toxicant might influence the outcome of exposure to a second toxicant has not been explored. In this study, we investigated whether nickel-induced transcriptional memory influences the outcome of the cell's response to a second respiratory toxicant, nicotine. Nicotine, an addictive compound in tobacco, is associated with the development of chronic lung diseases including chronic obstructive pulmonary disease (COPD) and pulmonary fibrosis. Our results show that nicotine exposure upregulated a subset of genes only in the cells previously exposed to nickel. Furthermore, our analyses indicate robust activation of interferon (IFN) signaling in these cells. IFN signaling is a driver of inflammation, which is associated with many chronic lung diseases. Therefore, our results suggest that nicotine exposure of lung cells that retain the transcriptional memory of previous nickel exposure could result in increased susceptibility to developing chronic inflammatory lung diseases.

Light control using vertically aligned dichroic dye films for windshield antireflection in automotive displays.

A vertically aligned dichroic dye (VA-Dye) film, whose absorption axis is perpendicular to that of its substrates, was laminated on a display panel in which the absorption axis of the top polarizer was set to 0°. In the vertical viewing angle of the display panel, the absorption axes of the top polarizer and dichroic dye are at right angles to each other, and, so, the light emitted from the display panel can be blocked. In the horizontal viewing angle of the display panel, the absorption axes of the top polarizer and dichroic dye are parallel to each other so that the light emitted from the display panel can be transmitted. Based on these polarization optics, we achieved complete elimination of light emitted in the upward or downward direction of the display panel, while the light emitted to the left and right is transmitted. We also added a designed optical compensation film using a positive biaxial (+B) retarder to the VA-Dye film so that the light emitted in the upward and downward directions of the display panel could be blocked in a wide viewing angle range (not only in the vertical direction, but also in the diagonal direction). The display panel using the VA-Dye film with the +B retarder showed excellent optical performance, such as significantly lower transmittance over a wide viewing angle range in the upward direction and relatively higher transmittance compared to that of a reference panel without the VA-Dye film. In addition, the VA-Dye film can be manufactured with a lower thickness, easier fabrication, and lower cost when compared with other technologies.

Temperature-Dependent Fracture Resistance of Silicon Nanopillars during Electrochemical Lithiation.

During the lithation of silicon anodes, the solid-state diffusion of lithium into LixSi follows the Arrhenius law, the resulting morphology and fracture behavior are determined by the silicon anode operation temperature. Here, we reveal the temperature dependence of the lithiation mechanics of crystalline silicon nanopillars (SiNPs) via microscopic observations of the anisotropic growth and fracture behavior. We fabricated 1D SiNP structures with various orientations (⟨100⟩, ⟨110⟩, and ⟨111⟩) as working electrodes and operated them at temperatures ranging from -20 to 40 °C. The lithiation of crystalline silicon at low temperatures exhibited preferential volume expansion along ⟨110⟩ and decreased fracture resistance. Furthermore, low temperatures caused the catastrophic fracture of amorphous silicon after the second lithiation. Our findings demonstrate the importance of silicon anode temperature control to prevent mechanical fracture during the cycle of lithium-ion batteries in harsh environments (e.g., electric vehicles in winter).

Prussian Blue Nanolayer-Embedded Separator for Selective Segregation of Nickel Dissolution in High Nickel Cathodes.

Transition metal layered oxides (LiNixCoyMn1-x-yO2, NCM) have been considered as one of the most promising cathodes for lithium-ion batteries used in long-mileage electric vehicles and energy storage systems. Despite its potential interest, dissolved transition metal (TM) ions toward anode sides can catalyze parasitic reactions such as electrolytic decomposition and dendritic Li growth, ultimately leading to catastrophic safety hazards. In this study, we demonstrate that Prussian Blue (PB) nanoparticles anchored to a commercial PE separator significantly reduce cell resistance and effectively suppress TM crossover during cycling, even under harsh conditions that accelerate Ni dissolution. Therefore, using a PB-coated separator in a harsh condition to intentionally dissolve Ni2+ ions at a high cutoff potential of 4.6 V, NCM||graphite full cells maintain 50.8% of their initial capacity at the 150th cycle. Scalable production of PB-coated separator through the facile synthetic methods can help establish a new research direction for the design of high-energy-density batteries.

Using Single-Crystal Graphene to Form Arrays of Nanocapsules Enabling the Observation of Light Elements in Liquid Cell Transmission Electron Microscopy.

We have designed and fabricated a TEM (transmission electron microscopy) liquid cell with hundreds of graphene nanocapsules arranged in a stack of two Si3N4-x membranes. These graphene nanocapsules are formed on arrays of nanoholes patterned on the Si3N4-x membrane by focused ion beam milling, allowing for better resolution than for the conventional graphene liquid cells, which enables the observation of light elements, such as atomic structures of silicon. We suggest that multiple nanocapsules provide opportunities for consecutive imaging under the same conditions in a single liquid cell. The use of single-crystal graphene windows offers an excellent signal-to-noise ratio and high spatial resolution. The motion of silicon nanoparticles (a low atomic number (Z) material) interacting with nanobubbles was observed, and analyzed, in detail. Our approach will help advance liquid-phase TEM observations by providing a straightforward method to encapsulate liquid between monolayers of various 2-dimensional materials.

Unveiling the Role of PEO-Capped TiO2 Nanofiller in Stabilizing the Anode Interface in Lithium Metal Batteries.

Lithium metal batteries (LMBs) will be a breakthrough in automotive applications, but they require the development of next-generation solid-state electrolytes (SSEs) to stabilize the anode interface. Polymer-in-ceramic PEO/TiO2 nanocomposite SSEs show outstanding properties, allowing unprecedented LMBs durability and self-healing capabilities. However, the mechanism underlying the inhibition/delay of dendrite growth is not well understood. In fact, the inorganic phase could act as both a chemical and a mechanical barrier to dendrite propagation. Combining advanced in situ and ex situ experimental techniques, we demonstrate that oligo(ethylene oxide)-capped TiO2, although chemically inert toward lithium metal, imparts SSE with mechanical and dynamical properties particularly favorable for application. The self-healing characteristics are due to the interplay between mechanical robustness and high local polymer mobility which promotes the disruption of the electric continuity of the lithium dendrites (razor effect).

Guaiacol as an Organic Superoxide Dismutase Mimics for Anti-ageing a Ru-based Li-rich Layered Oxide Cathode.

High-capacity Li-rich layered oxides using oxygen redox as well as transition metal redox suffer from its structural instability due to lattice oxygen escaped from its structure during oxygen redox and the following electrolyte decomposition by the reactive oxygen species. Herein, we rescued a Li-rich layered oxide based on 4d transition metal by employing an organic superoxide dismutase mimics as a homogeneous electrolyte additive. Guaiacol scavenged superoxide radicals via dismutation or disproportionation to convert two superoxide molecules to peroxide and dioxygen after absorbing lithium superoxide on its partially negative oxygen of methoxy and hydroxyl groups. Additionally, guaiacol was decomposed to form a thin and stable cathode-electrolyte interphase (CEI) layer, endowing the cathode with the interfacial stability.

Prussian Blue-Type Sodium-ion Conducting Solid Electrolytes for All Solid-State Batteries.

Conventional solid electrolyte frameworks typically consist of anions such as sulphur, oxygen, chlorine, and others, leading to inherent limitations in their properties. Despite the emergence of sulphide, oxide, and halide-based solid electrolytes for all-solid-state batteries, their utilization is hampered by issues, including the evolution of H2 S gas, the need for expensive elements, and poor contact. Here, we first introduce Prussian Blue analogue (PBA) open-framework structures as a solid electrolyte that demonstrates appreciable Na+ conductivity (>10-2 mS cm-1 ). We delve into the relationship between Na+ conductivity and the lattice parameter of N-coordinated transition metal, which is attributed to the reduced interaction between Na+ and the framework, corroborated by the distribution of relaxation times and density functional theory calculations. Among the five PBAs studied, Mn-PBA have exhibited the highest Na+ conductivity of 9.1×10-2 mS cm-1 . Feasibility tests have revealed that Mn-PBA have maintained a cycle retention of 95.1 % after 80cycles at 30 °C and a C-rate of 0.2C. Our investigation into the underlying mechanisms that play a significant role in governing the conductivity and kinetics of these materials contributes valuable insights for the development of alternative strategies to realize all-solid-state batteries.

Epithelial-mesenchymal transition: Insights into nickel-induced lung diseases.

Nickel compounds are environmental toxicants, prevalent in the atmosphere due to their widespread use in several industrial processes, extensive consumption of nickel containing products, as well as burning of fossil fuels. Exposure to nickel is associated with a multitude of chronic inflammatory lung diseases including asthma, chronic obstructive pulmonary disease (COPD) and pulmonary fibrosis. In addition, nickel exposure is implicated in the development of nasal and lung cancers. Interestingly, a common pathogenic mechanism underlying the development of diseases associated with nickel exposure is epithelial-mesenchymal transition (EMT). EMT is a process by which the epithelial cells lose their junctions and polarity and acquire mesenchymal traits, including increased ability to migrate and invade. EMT is a normal and essential physiological process involved in differentiation, development and wound healing. However, EMT also contributes to a number of pathological conditions, including fibrosis, cancer and metastasis. Growing evidence suggest that EMT induction could be an important outcome of nickel exposure. In this review, we discuss the role of EMT in nickel-induced lung diseases and the mechanisms associated with EMT induction by nickel exposure.

Acid-base effects of combined renal deletion of NBCe1-A and NBCe1-B.

The molecular mechanisms regulating ammonia metabolism are fundamental to acid-base homeostasis. Deletion of the A splice variant of Na+-bicarbonate cotransporter, electrogenic, isoform 1 (NBCe1-A) partially blocks the effect of acidosis to increase urinary ammonia excretion, and this appears to involve the dysregulated expression of ammoniagenic enzymes in the proximal tubule (PT) in the cortex but not in the outer medulla (OM). A second NBCe1 splice variant, NBCe1-B, is present throughout the PT, including the OM, where NBCe1-A is not present. The purpose of the present study was to determine the effect of combined renal deletion of NBCe1-A and NBCe1-B on systemic and PT ammonia metabolism. We generated NBCe1-A/B deletion using Cre-loxP techniques and used Cre-negative mice as controls. As renal NBCe1-A and NBCe1-B expression is limited to the PT, Cre-positive mice had PT NBCe1-A/B deletion [PT-NBCe1-A/B knockout (KO)]. Although on a basal diet, PT-NBCe1-A/B KO mice had severe metabolic acidosis, yet urinary ammonia excretion was not changed significantly. PT-NBCe1-A/B KO decreased the expression of phosphate-dependent glutaminase and phosphoenolpyruvate carboxykinase and increased the expression of glutamine synthetase, an ammonia-recycling enzyme, in PTs in both the cortex and OM. Exogenous acid loading increased ammonia excretion in control mice, but PT-NBCe1-A/B KO prevented any increase. PT-NBCe1-A/B KO significantly blunted acid loading-induced changes in phosphate-dependent glutaminase, phosphoenolpyruvate carboxykinase, and glutamine synthetase expression in PTs in both the cortex and OM. We conclude that NBCe1-B, at least in the presence of NBCe1-A deletion, contributes to PT ammonia metabolism in the OM and thereby to systemic acid-base regulation.NEW & NOTEWORTHY The results of the present study show that combined deletion of both A and B splice variants of electrogenic Na+-bicarbonate cotransporter 1 from the proximal tubule impairs acid-base homeostasis and completely blocks changes in ammonia excretion in response to acidosis, indicating that both proteins are critical to acid-base homeostasis.

Transcriptional repression of E-cadherin in nickel-exposed lung epithelial cells mediated by loss of Sp1 binding at the promoter.

E-cadherin plays a central role in the stability of epithelial tissues by facilitating cell-cell adhesion. Loss of E-cadherin expression is a hallmark of epithelial-mesenchymal transition (EMT), a major event in the pathogenesis of several lung diseases. Our earlier studies showed that nickel, a ubiquitous environmental toxicant, induced EMT by persistently downregulating E-cadherin expression in human lung epithelial cells and that the EMT remained irreversible postexposure. However, the molecular basis of persistent E-cadherin downregulation by nickel exposure is not understood. Here, our studies show that the binding of transcription factor Sp1 to the promoter of E-cadherin encoding gene, CDH1, is essential for its expression. Nickel exposure caused a loss of Sp1 binding at the CDH1 promoter, resulting in its downregulation and EMT induction. Loss of Sp1 binding at the CDH1 promoter was associated with an increase in the binding of ZEB1 adjacent to the Sp1 binding site. ZEB1, an EMT master regulator persistently upregulated by nickel exposure, is a negative regulator of CDH1. CRISPR-Cas9-mediated knockout of ZEB1 restored Sp1 binding at the CDH1 promoter. Furthermore, ZEB1 knockout rescued E-cadherin expression and re-established the epithelial phenotype. Since EMT is associated with a number of nickel-exposure-associated chronic inflammatory lung diseases including asthma, fibrosis and cancer and metastasis, our findings provide new insights into the mechanisms associated with nickel pathogenesis.

Linking void and interphase evolution to electrochemistry in solid-state batteries using operando X-ray tomography.

Despite progress in solid-state battery engineering, our understanding of the chemo-mechanical phenomena that govern electrochemical behaviour and stability at solid-solid interfaces remains limited compared to at solid-liquid interfaces. Here, we use operando synchrotron X-ray computed microtomography to investigate the evolution of lithium/solid-state electrolyte interfaces during battery cycling, revealing how the complex interplay among void formation, interphase growth and volumetric changes determines cell behaviour. Void formation during lithium stripping is directly visualized in symmetric cells, and the loss of contact that drives current constriction at the interface between lithium and the solid-state electrolyte (Li10SnP2S12) is quantified and found to be the primary cause of cell failure. The interphase is found to be redox-active upon charge, and global volume changes occur owing to partial molar volume mismatches at either electrode. These results provide insight into how chemo-mechanical phenomena can affect cell performance, thus facilitating the development of solid-state batteries.

Hyperammonemia After Lung Transplantation: Systematic Review and a Mini Case Series.

Background: Hyperammonemia after lung transplantation (HALT) is a rare but serious complication with high mortality. This systematic review delineates possible etiologies of HALT and highlights successful strategies used to manage this fatal complication. Methods: Seven biomedical databases and grey literature sources were searched using keywords relevant to hyperammonemia and lung transplantation for publications between 1995 and 2020. Additionally, we retrospectively analyzed HALT cases managed at our institution between January 2016 and August 2018. Results: The systematic review resulted in 18 studies with 40 individual cases. The mean peak ammonia level was 769 µmol/L at a mean of 14.1 days post-transplant. The mortality due to HALT was 57.5%. In our cohort of 120 lung transplants performed, four cases of HALT were identified. The mean peak ammonia level was 180.5 µmol/L at a mean of 11 days after transplantation. HALT in all four patients was successfully treated using a multimodal approach with an overall mortality of 25%. Conclusion: The incidence of HALT (3.3%) in our institution is comparable to prior reports. Nonetheless, ammonia levels in our cohort were not as high as previously reported and peaked earlier. We attributed these significant differences to early recognition and prompt institution of multimodal treatment approach.

Corrigendum: Hyperammonemia After Lung Transplantation: Systematic Review and a Mini Case Series.

[This corrects the article DOI: 10.3389/ti.2022.10433.].

Electronic-cigarette smoke induces lung adenocarcinoma and bladder urothelial hyperplasia in mice.

Electronic-cigarettes (E-cigs) are marketed as a safe alternative to tobacco to deliver the stimulant nicotine, and their use is gaining in popularity, particularly among the younger population. We recently showed that mice exposed to short-term (12 wk) E-cig smoke (ECS) sustained extensive DNA damage in lungs, heart, and bladder mucosa and diminished DNA repair in lungs. Nicotine and its nitrosation product, nicotine-derived nitrosamine ketone, cause the same deleterious effects in human lung epithelial and bladder urothelial cells. These findings raise the possibility that ECS is a lung and bladder carcinogen in addition to nicotine. Given the fact that E-cig use has become popular in the past decade, epidemiological data on the relationship between ECS and human cancer may not be known for a decade to come. In this study, the carcinogenicity of ECS was tested in mice. We found that mice exposed to ECS for 54 wk developed lung adenocarcinomas (9 of 40 mice, 22.5%) and bladder urothelial hyperplasia (23 of 40 mice, 57.5%). These lesions were extremely rare in mice exposed to vehicle control or filtered air. Current observations that ECS induces lung adenocarcinomas and bladder urothelial hyperplasia, combined with our previous findings that ECS induces DNA damage in the lungs and bladder and inhibits DNA repair in lung tissues, implicate ECS as a lung and potential bladder carcinogen in mice. While it is well established that tobacco smoke poses a huge threat to human health, whether ECS poses any threat to humans is not yet known and warrants careful investigation.

The Role of Polymer and Inorganic Coatings to Enhance Interparticle Connections Diagnosed by In Situ Techniques.

Surface coating on alloy anodes renders an effective remedy to tolerate internal stress and alleviate the side reaction with electrolytes for long-lasting reversible lithium redox reactions in lithium-ion batteries. However, the role of surface coating on the interparticle connections of alloy anodes remains not fully understood. Herein, we exploit real-time lithiation and mechanic measurement of SnO2 nanoparticles via in situ TEM with different coating layers, including conducting polymer polypyrrole and metal oxide MnO2. As a result, polypyrrole is more flexible to accommodate the volume expansion issue. More importantly, the polypyrrole coating layers offer a large contact area and strong adhesion force between the SnO2 nanoparticles, ensuring fast lithiation kinetics and high cycling stability. These observations provide new insight into how the interparticle connections of alloy anodes with diverse coating approaches can impact battery performance, shedding light on the practical processing of the alloy anode materials for high-energy Li-ion batteries.