RESUMO
Rechargeable batteries, typically represented by lithium-ion batteries, have taken a huge leap in energy density over the last two decades. However, they still face material/chemical challenges in ensuring safety and long service life at temperatures beyond the optimum range, primarily due to the chemical/electrochemical instabilities of conventional liquid electrolytes against aggressive electrode reactions and temperature variation. In this regard, a gel polymer electrolyte (GPE) with its liquid components immobilized and stabilized by a solid matrix, capable of retaining almost all the advantageous natures of the liquid electrolytes and circumventing the interfacial issues that exist in the all-solid-state electrolytes, is of great significance to realize rechargeable batteries with extended working temperature range. We begin this review with the main challenges faced in the development of GPEs, based on extensive literature research and our practical experience. Then, a significant section is dedicated to the requirements and design principles of GPEs for wide-temperature applications, with special attention paid to the feasibility, cost, and environmental impact. Next, the research progress of GPEs is thoroughly reviewed according to the strategies applied. In the end, we outline some prospects of GPEs related to innovations in material sciences, advanced characterizations, artificial intelligence, and environmental impact analysis, hoping to spark new research activities that ultimately bring us a step closer to realizing wide-temperature rechargeable batteries.
RESUMO
Hydrocarbon (HC)-based block copolymers have been recognized as promising candidates for proton exchange membranes (PEMs) due to their distinct hydrophilic-hydrophobic separation, which results in improved proton transport compared to that of random copolymers. However, most PEMs derived from HC-based ionomers, including block copolymers, encounter challenges related to durability in electrochemical cells due to their low mechanical and chemical properties. One method for reinforcing HC-based ionomers involves incorporating the ionomers into commercially available low surface tension PTFE porous substrates. Nevertheless, the high interfacial energy between the hydrocarbon-based ionomer solution and PTFE remains a challenge in this reinforcement process, which necessitates the application of surface energy treatment to PTFE. Here, multiblock sulfonated poly(arylene ether sulfone) (SPAES) ionomers are being reinforced using untreated PE on the surface, and this is compared to reinforcement using surface-treated porous PTFE. The PE support layer exhibits a lower surface energy barrier compared to the surface-treated PTFE layer for the infiltration of the multiblock SPAES solution. This is characterized by the absence of noticeable voids, high translucency, gas impermeability, and a physical and chemical stability. By utilizing a high surface tension PE support with a comparable value to the multiblock SPAES, effective reinforcement of the multiblock SPAES ionomers is achieved for a PEM, which is potentially applicable to various hydrogen energy-based electrochemical cells.
RESUMO
Despite the enormous interest in Li metal as an ideal anode material, the uncontrollable Li dendrite growth and unstable solid electrolyte interphase have plagued its practical application. These limitations can be attributed to the sluggish and uneven Li+ migration towards Li metal surface. Here, we report olefin-linked covalent organic frameworks (COFs) with electronegative channels for facilitating selective Li+ transport. The triazine rings and fluorinated groups of the COFs are introduced as electron-rich sites capable of enhancing salt dissociation and guiding uniform Li+ flux within the channels, resulting in a high Li+ transference number (0.85) and high ionic conductivity (1.78â mS cm-1 ). The COFs are mixed with a polymeric binder to form mixed matrix membranes. These membranes enable reliable Li plating/stripping cyclability over 700â h in Li/Li symmetric cells and stable capacity retention in Li/LiFePO4 cells, demonstrating its potential as a viable cationic highway for accelerating Li+ conduction.
RESUMO
Fused aromatic networks (FANs) have been studied in efforts to overcome the low physicochemical stability of metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), while preserving crystallinity. Herein, we describe the synthesis of a highly stable and crystalline FAN (denoted as Pz-FAN) using pyrazine-based building blocks to form porphyrazine (Pz) linkages via an irreversible reaction. Unlike most COFs and FANs, which are synthesized from two different building blocks, the new Pz-FAN is formed using a single building block by self-cyclotetramerization. Controlled and optimized reaction conditions result in a highly crystalline Pz-FAN with physicochemical stability. The newly prepared Pz-FAN displayed a high magnitude (1.16×10-2 â S cm-1 ) of proton conductivity compared to other reported FANs and polymers. Finally, the Pz-FAN-based membrane was evaluated for a proton-exchange membrane fuel cell (PEMFC), which showed maximum power and current densities of 192â mW cm-2 and 481â mA cm-2 , respectively.
RESUMO
Here we demonstrate an unconventional fabrication of highly transparent supercapacitors and electrodes using random networks of nanostructured metallic glass nanotroughs for their integrations as wirelessly rechargeable and invisible, skin heat patches. Transparent supercapacitors with fine conductive patterns were printed using an electrohydrodynamic jet-printing. Also, transparent and stretchable electrodes, for wireless antennas, heaters and interconnects, were formed using random network based on nanostructured CuZr nanotroughs and Ag nanowires with superb optoelectronic properties (sheet resistance of 3.0 Ω/sq at transmittance of 91.1%). Their full integrations, as an invisible heat patch on skin, enabled the wireless recharge of supercapacitors and the functions of heaters for thermal therapy of skin tissue. The demonstration of this transparent thermotherapy patch to control the blood perfusion level and hydration rate of skin suggests a promising strategy toward next-generation wearable electronics.
Assuntos
Nanoestruturas , Nanofios , Eletrodos , Eletrônica , Temperatura AltaRESUMO
Despite their potential as a next-generation alternative to current state-of-the-art lithium (Li)-ion batteries, rechargeable aqueous zinc (Zn)-ion batteries still lag in practical use due to their low energy density, sluggish redox kinetics, and limited cyclability. In sharp contrast to previous studies that have mostly focused on materials development, herein, a new electrode architecture strategy based on a 3D bicontinuous heterofibrous network scaffold (HNS) is presented. The HNS is an intermingled nanofibrous mixture composed of single-walled carbon nanotubes (SWCNTs, for electron-conduction channels) and hydrophilic cellulose nanofibers (CNFs, for electrolyte accessibility). As proof-of-concept for the HNS electrode, manganese dioxide (MnO2 ) particles, one of the representative Zn-ion cathode active materials, are chosen. The HNS allows uniform dispersion of MnO2 particles and constructs bicontinuous electron/ion conduction pathways over the entire HNS electrode (containing no metallic foil current collectors), thereby facilitating the redox kinetics (in particular, the intercalation/deintercalation of Zn2+ ions) of MnO2 particles. Driven by these advantageous effects, the HNS electrode enables substantial improvements in the rate capability, cyclability (without structural disruption and aggregation of MnO2 ), and electrode sheet-based energy (91 Wh kgelectrode -1 )/power (1848 W kgelectrode -1 ) densities, which lie far beyond those achievable with conventional Zn-ion battery technologies.
RESUMO
Lithium (Li) metal has garnered considerable attention in next-generation battery anodes. However, its environmental vulnerability, along with the electrochemical instability and safety failures, poses a formidable challenge to commercial use. Here, we describe a new class of antioxidative Li reservoir based on interstitial channels of single-walled carbon nanotube (SWCNT) bundles. The Li preferentially confined in the interstitial channels exhibits unusual thermodynamic stability and exceptional capacity even after exposure to harsh environmental conditions, thereby enabling us to propose a new lithiation/delithiation mechanism in carbon nanotubes. To explore practical application of this approach, the Li confined in the SWCNT bundles is electrochemically extracted and subsequently plated on a copper foil. The resulting Li-plated copper foil shows reliable charge/discharge behavior comparable to those of pristine Li foils. Benefiting from the confinement effect of the interstitial channels, the SWCNT bundles hold great promise as an environmentally tolerant, high-capacity Li reservoir.
RESUMO
Porous crystalline materials such as covalent organic frameworks and metal-organic frameworks have garnered considerable attention as promising ion conducting media. However, most of them additionally incorporate lithium salts and/or solvents inside the pores of frameworks, thus failing to realize solid-state single lithium-ion conduction behavior. Herein, we demonstrate a lithium sulfonated covalent organic framework (denoted as TpPa-SO3Li) as a new class of solvent-free, single lithium-ion conductors. Benefiting from well-designed directional ion channels, a high number density of lithium-ions, and covalently tethered anion groups, TpPa-SO3Li exhibits an ionic conductivity of 2.7 × 10-5 S cm-1 with a lithium-ion transference number of 0.9 at room temperature and an activation energy of 0.18 eV without additionally incorporating lithium salts and organic solvents. Such unusual ion transport phenomena of TpPa-SO3Li allow reversible and stable lithium plating/stripping on lithium metal electrodes, demonstrating its potential use for lithium metal electrodes.
RESUMO
Nanocellulose has emerged as a sustainable and promising nanomaterial owing to its unique structures, superb properties, and natural abundance. Here, we present a comprehensive review of the current research activities that center on the development of nanocellulose for advanced electrochemical energy storage. We begin with a brief introduction of the structural features of cellulose nanofibers within the cell walls of cellulose resources. We then focus on a variety of processes that have been explored to fabricate nanocellulose with various structures and surface chemical properties. Next, we highlight a number of energy storage systems that utilize nanocellulose-derived materials, including supercapacitors, lithium-ion batteries, lithium-sulfur batteries, and sodium-ion batteries. In this section, the main focus is on the integration of nanocellulose with other active materials, developing films/aerogel as flexible substrates, and the pyrolyzation of nanocellulose to carbon materials and their functionalization by activation, heteroatom-doping, and hybridization with other active materials. Finally, we present our perspectives on several issues that need further exploration in this active research field in the future.
RESUMO
57Fe nuclear magnetic resonance (NMR) of magnetite nanocrystals ranging in size from 7 nm to 7 µm is measured. The line width of the NMR spectra changes drastically around 120 K, showing microscopic evidence of the Verwey transition. In the region above the transition temperature, the line width of the spectrum increases and the spin-spin relaxation time decreases as the nanocrystal size decreases. The line-width broadening indicates the significant deformation of magnetic structure and reduction of charge order compared to bulk crystals, even when the structural distortion is unobservable. The reduction of the spin-spin relaxation time is attributed to the suppressed polaron hopping conductivity in ferromagnetic metals, which is a consequence of the enhanced electron-phonon coupling in the quantum-confinement regime. Our results show that the magnetic distortion occurs in the entire nanocrystal and does not comply with the simple model of the core-shell binary structure with a sharp boundary.
RESUMO
Facile/sustainable utilization of sulfur active materials is an ultimate challenge in high-performance lithium-sulfur (Li-S) batteries. Here, as a membrane-driven approach to address this issue, we demonstrate a new class of polysulfide-breathing (capable of reversibly adsorbing and desorbing polysulfides)/dual (electron and ion) conductive, heterolayered battery separator membranes (denoted as "MEC-AA separators") based on 0D (nanoparticles)/1D (nanofibers) composite mats. The MEC-AA separator is fabricated through an in-series, concurrent electrospraying/electrospinning process. The top layer of the MEC-AA separator comprises close-packed mesoporous MCM-41 nanoparticles spatially besieged by multiwalled carbon nanotubes (MWNT) wrapped poly(ether imide) (PEI) nanofibers. The MCM-41 in the top layer shows reversible adsorption/desorption of polysulfides, and the MWNT-wrapped PEI nanofibers act as a dual-conductive upper current collector. Preferential deposition of the MWNTs along the PEI nanofibers and dispersion state of the separator components are elucidated theoretically using computational methods. The support layer, which consists of densely packed Al2O3 nanoparticles and polyacrylonitrile nanofibers, serves as a mechanically/thermally stable and polysulfide-capturing porous membrane. The unique structure and multifunctionality of the MEC-AA separator allow for substantial improvements in redox reaction kinetics and cycling performance of Li-S cells far beyond those achievable with conventional polyolefin separators. The heterolayered nanomat-based membrane strategy opens a new route toward electrochemically active/permselective advanced battery separators.
RESUMO
PURPOSE: The purpose of this study was to compare the insertion sites of the posterior horn between discoid and non-discoid lateral meniscus using magnetic resonance imaging (MRI). METHODS: Two hundred and twenty-seven patients who had MRI scans before surgery and underwent arthroscopy were enroled in this study. A coronal view showing the narrowest width of the midbody of the lateral meniscus was chosen to measure the widths of the entire tibial plateau and the midbody of the lateral meniscus. Considering the ratio of the meniscal width to the tibial plateau width, the patients were divided into non-discoid, incomplete discoid, and complete discoid groups. On a coronal view accurately showing the insertion of the posterior horn of the lateral meniscus, a distance between the peak of the lateral tibial eminence and the centre of the insertion of the posterior horn, and a width of the lateral tibial plateau between the lateral edge of the tibial plateau and the peak of the lateral tibial eminence were measured. RESULTS: The insertion centre of the posterior horn was located more medially in the incomplete and complete discoid groups than in the non-discoid group (p = 0.003, 0.010, respectively). When individual differences in the knee size were corrected, the insertion centre of the posterior horn in the incomplete discoid and complete discoid groups was located more medially than in the non-discoid group (p = 0.009, 0.003, respectively). CONCLUSION: The insertion centre of the posterior horn of the lateral meniscus is located more medially to the apex of the lateral tibial eminence in the discoid group than in the non-discoid group. This finding needs to be considered for an accurate position of the posterior horn of lateral meniscus during the lateral meniscal allograft transplantation. LEVEL OF EVIDENCE: IV.
Assuntos
Meniscos Tibiais/anormalidades , Adulto , Artroscopia , Estudos de Casos e Controles , Feminino , Humanos , Articulação do Joelho/anormalidades , Articulação do Joelho/anatomia & histologia , Articulação do Joelho/diagnóstico por imagem , Articulação do Joelho/cirurgia , Imageamento por Ressonância Magnética , Masculino , Meniscos Tibiais/anatomia & histologia , Meniscos Tibiais/diagnóstico por imagem , Pessoa de Meia-Idade , Estudos Retrospectivos , Tíbia/anatomia & histologia , Tíbia/diagnóstico por imagem , Adulto JovemRESUMO
BACKGROUND: This study was conducted to report loss of reduction and complications after single-tunnel coracoclavicular (CC) ligament reconstruction with autogenous semitendinosus tendon graft for acute acromioclavicular (AC) joint dislocations. METHODS: This retrospective study included patients with acute, unstable AC dislocations (surgery within 6 weeks after trauma). We excluded patients with chronic injury and distal clavicle fractures with CC ligaments disruption. We measured the CC distance on anteroposterior radiographs of both clavicles, preoperatively, immediately postoperatively, and at the final follow-up visit. We evaluated clinical outcomes using the American Shoulder and Elbow Surgeons Shoulder Assessment and the University of California, Los Angeles Shoulder Rating Scale scores and perioperative complications. RESULTS: There were 30 patients (27 men and 3 women) with mean age of 41 years (range, 19-70 years). The mean follow-up period was 31 months (range, 12-186 months). Mean CC distance was 15.5 ± 3.7 mm (84% ± 14% of the contralateral shoulder) preoperatively, 8.9 ± 2.6 mm (9% ± 40%) immediately postoperatively (P < .001), and 10.6 ± 3.3 mm (24% ± 39%) at the final assessment (P < .001), showing an increase of the CC distance during the follow-up. Loss of reduction (defined as >25% increase of CC distance) developed in 14 patients (47%), and complications occurred in 6 patients (20%), including 3 distal clavicle fractures through the tunnel. Final clinical scores were significantly lower in patients with complications (27 vs. 33 of the University of California, Los Angeles assessment [P < .001] and 81 vs. 95 of the American Shoulder and Elbow Surgeons Shoulder assessment [P < .001]). CONCLUSION: In acute AC joint dislocation, single-tunnel CC ligament reconstruction using autogenous tendon graft resulted in loss of reduction rate of 47% and a complication rate of 20%. The development of complications adversely affected clinical outcomes.
Assuntos
Articulação Acromioclavicular/cirurgia , Ligamentos Articulares/cirurgia , Complicações Pós-Operatórias/etiologia , Luxação do Ombro/cirurgia , Tendões/transplante , Articulação Acromioclavicular/diagnóstico por imagem , Adulto , Idoso , Autoenxertos , Clavícula/diagnóstico por imagem , Clavícula/lesões , Processo Coracoide/diagnóstico por imagem , Feminino , Fraturas Ósseas/etiologia , Humanos , Masculino , Pessoa de Meia-Idade , Período Pós-Operatório , Radiografia , Estudos Retrospectivos , Adulto JovemRESUMO
The hierarchical porous structure has garnered considerable attention as a multiscale engineering strategy to bring unforeseen synergistic effects in a vast variety of functional materials. Here, we demonstrate a "microporous covalent organic framework (COF) net on mesoporous carbon nanotube (CNT) net" hybrid architecture as a new class of molecularly designed, hierarchical porous chemical trap for lithium polysulfides (Li2Sx) in Li-S batteries. As a proof of concept for the hybrid architecture, self-standing COF-net on CNT-net interlayers (called "NN interlayers") are fabricated through CNT-templated in situ COF synthesis and then inserted between sulfur cathodes and separators. Two COFs with different micropore sizes (COF-1 (0.7 nm) and COF-5 (2.7 nm)) are chosen as model systems. The effects of the pore size and (boron-mediated) chemical affinity of microporous COF nets on Li2Sx adsorption phenomena are theoretically investigated through density functional theory calculations. Benefiting from the chemical/structural uniqueness, the NN interlayers effectively capture Li2Sx without impairing their ion/electron conduction. Notably, the COF-1 NN interlayer, driven by the well-designed microporous structure, allows for the selective deposition/dissolution (i.e., facile solid-liquid conversion) of electrically inert Li2S. As a consequence, the COF-1 NN interlayer provides a significant improvement in the electrochemical performance of Li-S cells (capacity retention after 300 cycles (at charge/discharge rate = 2.0 C/2.0 C) = 84% versus 15% for a control cell with no interlayer) that lies far beyond those accessible with conventional Li-S technologies.
RESUMO
Alternative materials obtained from natural resources have recently garnered considerable attention as an innovative solution to bring unprecedented advances in various energy storage systems. Here, we present a new class of heterolayered nanomat-based hierarchical/asymmetric porous membrane with synergistically coupled chemical activity as a nanocellulose-mediated green material strategy to develop smart battery separator membranes far beyond their current state-of-the-art counterparts. This membrane consists of a terpyridine (TPY)-functionalized cellulose nanofibril (CNF) nanoporous thin mat as the top layer and an electrospun polyvinylpyrrolidone (PVP)/polyacrylonitrile (PAN) macroporous thick mat as the support layer. The hierarchical/asymmetric porous structure of the heterolayered nanomat is rationally designed with consideration of the trade-off between leakage current and ion transport rate. The TPY (to chelate Mn(2+) ions) and PVP (to capture hydrofluoric acid)-mediated chemical functionalities bring a synergistic coupling in suppressing Mn(2+)-induced adverse effects, eventually enabling a substantial improvement in the high-temperature cycling performance of cells.
RESUMO
Forthcoming flexible/wearable electronic devices with shape diversity and mobile usability garner a great deal of attention as an innovative technology to bring unprecedented changes in our daily lives. From the power source point of view, conventional rechargeable batteries (one representative example is a lithium-ion battery) with fixed shapes and sizes have intrinsic limitations in fulfilling design/performance requirements for the flexible/wearable electronics. Here, as a facile and efficient strategy to address this formidable challenge, we demonstrate a new class of printable solid-state batteries (referred to as "PRISS batteries"). Through simple stencil printing process (followed by ultraviolet (UV) cross-linking), solid-state composite electrolyte (SCE) layer and SCE matrix-embedded electrodes are consecutively printed on arbitrary objects of complex geometries, eventually leading to fully integrated, multilayer-structured PRISS batteries with various form factors far beyond those achievable by conventional battery technologies. Tuning rheological properties of SCE paste and electrode slurry toward thixotropic fluid characteristics, along with well-tailored core elements including UV-cured triacrylate polymer and high boiling point electrolyte, is a key-enabling technology for the realization of PRISS batteries. This process/material uniqueness allows us to remove extra processing steps (related to solvent drying and liquid-electrolyte injection) and also conventional microporous separator membranes, thereupon enabling the seamless integration of shape-conformable PRISS batteries (including letters-shaped ones) into complex-shaped objects. Electrochemical behavior of PRISS batteries is elucidated via an in-depth analysis of cell impedance, which provides a theoretical basis to enable sustainable improvement of cell performance. We envision that PRISS batteries hold great promise as a reliable and scalable platform technology to open a new concept of cell architecture and fabrication route toward flexible power sources with exceptional shape conformability and aesthetic versatility.
RESUMO
Bulk-type all-solid-state lithium batteries (ASLBs) are considered a promising candidate to outperform the conventional lithium-ion batteries. Unfortunately, the current technology level of ASLBs is in a stage of infancy in terms of cell-based (not electrode-material-based) energy densities and scalable fabrication. Here, we report on the first ever bendable and thin sulfide solid electrolyte films reinforced with a mechanically compliant poly(paraphenylene terephthalamide) nonwoven (NW) scaffold, which enables the fabrication of free-standing and stackable ASLBs with high energy density and high rate capabilities. The ASLB, using a thin (â¼70 µm) NW-reinforced SE film, exhibits a 3-fold increase of the cell-energy-density compared to that of a conventional cell without the NW scaffold.
RESUMO
The facilitation of ion/electron transport, along with ever-increasing demand for high-energy density, is a key to boosting the development of energy storage systems such as lithium-ion batteries. Among major battery components, separator membranes have not been the center of attention compared to other electrochemically active materials, despite their important roles in allowing ionic flow and preventing electrical contact between electrodes. Here, we present a new class of battery separator based on inverse opal-inspired, seamless nanoscaffold structure ("IO separator"), as an unprecedented membrane opportunity to enable remarkable advances in cell performance far beyond those accessible with conventional battery separators. The IO separator is easily fabricated through one-pot, evaporation-induced self-assembly of colloidal silica nanoparticles in the presence of ultraviolet (UV)-curable triacrylate monomer inside a nonwoven substrate, followed by UV-cross-linking and selective removal of the silica nanoparticle superlattices. The precisely ordered/well-reticulated nanoporous structure of IO separator allows significant improvement in ion transfer toward electrodes. The IO separator-driven facilitation of the ion transport phenomena is expected to play a critical role in the realization of high-performance batteries (in particular, under harsh conditions such as high-mass-loading electrodes, fast charging/discharging, and highly polar liquid electrolyte). Moreover, the IO separator enables the movement of the Ragone plot curves to a more desirable position representing high-energy/high-power density, without tailoring other battery materials and configurations. This study provides a new perspective on battery separators: a paradigm shift from plain porous films to pseudoelectrochemically active nanomembranes that can influence the charge/discharge reaction.
RESUMO
The rapidly approaching smart/wearable energy era necessitates advanced rechargeable power sources with reliable electrochemical properties and versatile form factors. Here, as a unique and promising energy storage system to address this issue, we demonstrate a new class of heterolayered, one-dimensional (1D) nanobuilding block mat (h-nanomat) battery based on unitized separator/electrode assembly (SEA) architecture. The unitized SEAs consist of wood cellulose nanofibril (CNF) separator membranes and metallic current collector-/polymeric binder-free electrodes comprising solely single-walled carbon nanotube (SWNT)-netted electrode active materials (LiFePO4 (cathode) and Li4Ti5O12 (anode) powders are chosen as model systems to explore the proof of concept for h-nanomat batteries). The nanoporous CNF separator plays a critical role in securing the tightly interlocked electrode-separator interface. The SWNTs in the SEAs exhibit multifunctional roles as electron conductive additives, binders, current collectors and also non-Faradaic active materials. This structural/physicochemical uniqueness of the SEAs allows significant improvements in the mass loading of electrode active materials, electron transport pathways, electrolyte accessibility and misalignment-proof of separator/electrode interface. As a result, the h-nanomat batteries, which are easily fabricated by stacking anode SEA and cathode SEA, provide unprecedented advances in the electrochemical performance, shape flexibility and safety tolerance far beyond those achievable with conventional battery technologies. We anticipate that the h-nanomat batteries will open 1D nanobuilding block-driven new architectural design/opportunity for development of next-generation energy storage systems.