Quantum electron liquid and its possible phase transition.

Purely quantum electron systems exhibit intriguing correlated electronic phases by virtue of quantum fluctuations in addition to electron-electron interactions. To realize such quantum electron systems, a key ingredient is dense electrons decoupled from other degrees of freedom. Here, we report the discovery of a pure quantum electron liquid that spreads up to ~3 Å in a vacuum on the surface of an electride crystal. Its extremely high electron density and weak hybridization with buried atomic orbitals show the quantum and pure nature of the electrons, which exhibit a polarized liquid phase, as demonstrated by our spin-dependent measurement. Furthermore, upon enhancing the electron correlation strength, the dynamics of the quantum electrons change to that of a non-Fermi liquid along with an anomalous band deformation, suggestive of a transition to a hexatic liquid crystal phase. Our findings develop the frontier of quantum electron systems and serve as a platform for exploring correlated electronic phases in a pure fashion.

Excellent Crystallinity and Stability Covalent-Organic Frameworks with High Emission and Anions Sensing.

Covalent-organic frameworks (COFs) are a new class of porous crystalline frameworks with high π-conjugation and periodical skeletons. The highly ordered π-conjugation structures in some COFs allow exciton migration and energy transfer over the frameworks, which leads to good fluorescence probing ability. In this work, two COFs (TFHPB-TAPB-COF and TFHPB-TTA-COF) are successfully condensed via the Schiff base condensation reaction. The intramolecular hydrogen bonds between imine bonds and hydroxyl groups form the excited-state intramolecular proton transfer (ESIPT) strategy. Owing to intramolecular hydrogen bonds in the skeleton, the two COFs show high crystallinity, remarkable stability, and excellent luminescence. The COFs represent a good sensitivity and selectivity to fluoride anions via fluorescence turn-off. Other halogen anions (chloride, bromide, and iodine) and acid anions (nitrate and hydrogen carbonate) remain inactive. These results imply that only fluoride anion is capable of opening the hydrogen bond interaction and hence break the ESIPT strategy. The detection limit toward fluoride anion is down to nanomoles level, ranking the best performances among fluoride anion sensors systems.

Realization of Structural Colors via Capped Cu-based F-P Cavity Structure.

Structural colors with tunable properties have several applications in the beautification of mobile devices, surface decoration, art and color filters. Herein, we propose an asymmetric F-P cavity design to systematically tune structural colors by changing the thickness of the top metal and intermediate insulator. In this study, Cu and Si3N4 were chosen as the top metal and intermediate insulator layers, respectively, various reflection colors being realized on the Cu surface. Various capping layers-that is, SiO2, polymethyl methacrylate (PMMA), and a commercially available clear coat named ProtectaClear-were used to protect the Cu surface from scratching and oxidation. PMMA coatings can protect Cu from corrosive environments without degradation of the color quality. The colors can be tuned by controlling the thickness of either the metal or intermediate insulator layers, and vivid structural colors-including orange, bright orange, red, purple, violet, light blue, green-yellow, and yellow-green-can be printed. The colors obtained can be attributed to thin-film interference.

Sodium-assisted passivation of grain boundaries and defects in Cu2ZnSnSe4 thin films.

The long stagnation of the photo-conversion efficiency of kesterites below 13% is a source of frustration in the scientific community. In this study, we investigated the effects of sodium on the passivation of grain boundaries and defects in Cu2ZnSnSe4 (CZTSe) grown on a soda-lime glass (SLG) and borosilicate (BS) glass. Because BS glass does not inherently contain sodium, we placed a thin layer of NaF between CZTSe and Mo. The composition of the samples is Cu-poor and Zn-rich. The distribution of sodium and its contributions to phase formation and defects were examined by cross-sectional energy-dispersive X-ray profiling, Raman scattering spectroscopy and imaging, surface potential and photoluminescence. From the experimental results, it can be strongly claimed that sodium ions segregate predominantly near the grain boundaries and reduce CuZn-related defects. These local surface imaging analyses provided the exact locations of the secondary phases. In particular, the photo-assisted scanning probe method enabled us to observe the changes in the optoelectrical properties of the thin films and the carrier behavior within the materials. Further studies with distinct alkali ions and optimal processing conditions will pave a way to improve the performance of kesterite solar cells.

Anion Extraction-Induced Polymorph Control of Transition Metal Dichalcogenides.

Controlled phase conversion in polymorphic transition metal dichalcogenides (TMDs) provides a new synthetic route for realizing tunable nanomaterials. Most conversion methods from the stable 2H to metastable 1T phase are limited to kinetically slow cation insertion into atomically thin layered TMDs for charge transfer from intercalated ions. Here, we report that anion extraction by the selective reaction between carbon monoxide (CO) and chalcogen atoms enables predictive and scalable TMD polymorph control. Sulfur vacancy, induced by anion extraction, is a key factor in molybdenum disulfide (MoS2) polymorph conversion without cation insertion. Thermodynamic MoS2-CO-CO2 ternary phase diagram offers a processing window for efficient sulfur vacancy formation with precisely controlled MoS2 structures from single layer to multilayer. To utilize our efficient phase conversion, we synthesize vertically stacked 1T-MoS2 layers in carbon nanofibers, which exhibit highly efficient hydrogen evolution reaction catalytic activity. Anion extraction induces the polymorph conversion of tungsten disulfide (WS2) from 2H to 1T. This reveals that our method can be utilized as a general polymorph control platform. The versatility of the gas-solid reaction-based polymorphic control will enable the engineering of metastable phases in 2D TMDs for further applications.

Motion Estimation-Assisted Denoising for an Efficient Combination with an HEVC Encoder.

Noise, which is commonly generated in low-light environments or by low-performance cameras, is a major cause of the degradation of compression efficiency. In previous studies that attempted to combine a denoise algorithm and a video encoder, denoising was used independently of the code for pre-processing or post-processing. However, this process must be tightly coupled with encoding because noise affects the compression efficiency greatly. In addition, this represents a major opportunity to reduce the computational complexity, because the encoding process and a denoise algorithm have many similarities. In this paper, a simple, add-on denoising scheme is proposed through a combination of high-efficiency video coding (HEVC) and block matching three-dimensional collaborative filtering (BM3D) algorithms. It is known that BM3D has excellent denoise performance but that it is limited in its use due to its high computational complexity. This paper employs motion estimation in HEVC to replace the block matching of BM3D so that most of the time-consuming functions are shared. To overcome the challenging algorithmic differences, the hierarchical structure in HEVC is uniquely utilized. As a result, the computational complexity is drastically reduced while the competitive performance capabilities in terms of coding efficiency and denoising quality are maintained.

Are Pasteurized Autografts Durable for Reconstructions After Bone Tumor Resections?

BACKGROUND: Pasteurized autograft is regarded as a biologic reconstructive option for managing bone defects after tumor resection; however, reports on long-term outcomes from large patient series are scarce. Contrary to previous favorable reports, we have observed many patients with failures, in particular as the duration of followup increased. Because pasteurized autografts are used in many countries as a reconstruction option, we wished to formally evaluate patients who underwent this approach at one specialty center. QUESTIONS/PURPOSES: (1) What is the graft survival and what proportion of patients achieved union when pasteurized autografts were used for bone defects after tumor resection? (2) What are the complications and causes of graft removal? (3) What factors are related to the likelihood of union and graft survival? (4) What is the survival and cause of failure by type of pasteurized autograft reconstruction? METHODS: Over a 26-year period from 1988 to 2013, we performed 1358 tumor resections in our center. Of these, 353 were reconstructed with pasteurized autograft. Other reconstructions included endoprostheses (508 patients), instant arthrodesis using an intramedullary nail and bone cement (286 patients), allografts (97 patients), and resection only (114 patients). During the period in question, we generally used this approach when tumor showed an osteoblastic pattern and less than one-third cortical destruction in osteolytic tumor. We generally avoided this approach when the tumor showed an extensive osteolytic pattern. We excluded 75 (21% [75 of 353]) patients, 21 (6% [21 of 353]) for incomplete clinical data and 54 (15% [54 of 353]) with a followup < 2 years or those lost to followup leaving 278 autografts eligible. The mean followup was 113 months (range, 25-295 months). Of these 278 patients, 242 patients had primary bone sarcomas, 22 patients had soft tissue tumor invading bone, seven patients had metastatic carcinoma, and seven patients had aggressive benign bone tumors. From a chart review, we obtained the age, sex, location, tumor volume, histologic diagnosis, use of chemotherapy, graft length, fixation modality, type of pasteurized bone used, proportion of union, complications, and oncologic outcome of the patients. In total, 377 junctional sites were assessed for union with serial radiographs. We defined junctions showing union < 2 years as union and > 2 years as delayed union. We grouped our patients into type of pasteurized bone use: pasteurized autograft-prosthesis composites (PPCs) were performed in 149, intercalary grafts in 71, hemicortical grafts in 15, osteoarticular in 12, and fusion of a joint in 31 patients. The endpoint of interest included removal of the autograft with implant loosening, infection, fracture of the graft, or any reoperation resulting in removal. Survival of the graft was determined by Kaplan-Meier plot and intergroup differences were determined using log-rank test. RESULTS: Five, 10-, and 20-year survival of 278 autografts was 73% ± 5.5%, 59% ± 6.7%, and 40% ± 13.6%, respectively. Of 278 autografts, 105 (38%) were removed with complications. Cause of removal included infection in 13% (33 patients), nonunion in 7% (18 patients), fracture of graft in 6% (16 patients), resorption of the graft in 5% (14 patients), and local recurrence in 4% (11 patients). Univariate survival analysis revealed that patient age ≤ 15 years (p = 0.027; hazard ratio [HR], 1.541), male sex (p = 0.004; HR, 1.810), and pelvic location (p = 0.05; HR, 2.518) were associated with graft removal. The 20-year survival rate of osteoarticular and hemicortical methods was 92% (95% confidence interval, -15.6% to +8.3%) and 80% ± 20%, respectively. For intercalary and fusion, it was 46% ± 15% and 28% ± 22%, respectively, although for PPC, it was 37% ± 22%. Log-rank survival analysis showed the osteoarticular and hemicortical groups had better graft survival compared with other types of reconstruction (p = 0.028; HR, 0.499). The most prevalent cause of graft removal in three major types of reconstruction was as follows: (1) PPC type was infection (30% [17 of 56]); (2) intercalary graft was infection, nonunion, and local recurrence in even proportions of 29% (86% [24 of 28]); and (3) fusion was infection (35% [six of 17]). Two hundred ten (56%) of 377 junctional sites showed union within 2 years (average, 14 months), 51 (13%) junctions showed delayed union after 2 years (average, 40 months), and the remaining 116 (31%) junctions showed nonunion. Diaphyseal junction (p = 0.029) and male sex (p = 0.004) showed a higher proportion of nonunion by univariate analysis. CONCLUSIONS: Compared with the favorable short-term and small cohort reports, survival of pasteurized autograft in this long-term large cohort was disappointing. We believe that pasteurized autograft should be used with caution in children and adolescents, in the pelvic region, and in PPC form. When bone stock destruction is minimal, it is worth considering this approach for small intercalary or distal long bone reconstruction. We believe this procedure is best indicated after hemicortical resection of long bone. LEVEL OF EVIDENCE: Level III, therapeutic study.

Effects of salmon DNA fraction in vitro and in a monosodium iodoacetate-induced osteoarthritis rat model.

PRF001 is a fragmented DNA polymer extracted from the testes of salmon. The purpose of this study was to assess the anti-inflammatory effect of PRF001 in vitro as well as the protective effect of PRF001 intake against arthritis in a rat model. In vitro, cell survival and inflammatory markers after H2O2 treatment to induce cell damage were investigated in CHON-001 cells treated with different concentrations of PRF001. In vivo, osteoarthritis was induced by intra-articular injection of monosodium iodoacetate (MIA) into the knee joints of rats. After consumption of PRF001 (10, 50, or 100 mg/kg) for 4 weeks, inflammatory mediators and cytokines in articular cartilage were investigated. In vitro, the levels of inflammatory markers, IL-1ß, TNF-α, COX-2, iNOS, and PGE2, were significantly suppressed by PRF001 treatment. In vivo, the inflammatory mediators and cytokines, IL-1ß, p-Erk1/2, NF-κB, TNF-α, COX-2, and PGE2, as well as MMP3 and MMP7, which have catabolic activity in chondrocytes, were decreased in the MIA-induced osteoarthritic rats following intake of PRF001. Histological analysis revealed that PRF001 had a protective effect on the articular cartilage. Altogether, these results demonstrated that the anti-inflammatory property of PRF001 contributes to its protective effects in osteoarthritis through deregulating IL-1ß, TNF-α, and subsequent signals, such as p-Erk1/2, NF-κB, COX-2, PGE2, and MMPs.

Corrigendum to: Effects of salmon DNA fraction in vitro and in a monosodium iodoacetate-induced osteoarthritis rat model.

[This corrects the article on p. 163 in vol. 22, PMID: 29520169.].

Strong Localization of Anionic Electrons at Interlayer for Electrical and Magnetic Anisotropy in Two-Dimensional Y2C Electride.

We have synthesized a single crystalline Y2C electride of centimeter-scale by floating-zone method and successfully characterized its anisotropic electrical and magnetic properties. In-plane resistivity upturn at low temperature together with anisotropic behavior of negative magnetoresistance is ascribed to the stronger suppression of spin fluctuation along in-plane than that along the c-axis, verifying the existence of magnetic moments preferred for the c-axis. A superior magnetic moment along the c-axis to that along the in-plane direction strongly demonstrates the anisotropic magnetism of Y2C electride containing a magnetically easy axis. It is clarified from the theoretical calculations that the anisotropic nature of the Y2C electride originates from strongly localized anionic electrons with an inherent magnetic anisotropy in the interlayer spaces.

Unexpected Roles of Interstitially Doped Lithium in Blue and Green Light Emitting Y2O3:Bi3+: A Combined Experimental and Computational Study.

To enhance the photoluminescence of lanthanide oxide, a clear understanding of its defect chemistry is necessary. In particular, when yttrium oxide, a widely used phosphor, undergoes doping, several of its atomic structures may be coupled with point defects that are difficult to understand through experimental results alone. Here, we report the strong enhancement of the photoluminescence (PL) of Y2O3:Bi3+ via codoping with Li+ ions and suggest a plausible mechanism for that enhancement using both experimental and computational studies. The codoping of Li+ ions into the Y2O3:Bi3+ phosphor was found to cause significant changes in its structural and optical properties. Interestingly, unlike previous reports on Li+ codoping with several other phosphors, we found that Li+ ions preferentially occupy interstitial sites of the Y2O3:Bi3+ phosphor. Computational insights based on density functional theory calculations also indicate that Li+ is energetically more stable in the interstitial sites than in the substitutional sites. In addition, interstitially doped Li+ was found to favor the vicinity of Bi3+ by an energy difference of 0.40 eV in comparison to isolated sites. The calculated DOS showed the formation of a shallow level directly above the unoccupied 6p orbital of Bi3+ as the result of interstitial Li+ doping, which may be responsible for the enhanced PL. Although the crystallinity of the host materials increased with the addition of Li salts, the degree of increase was minimal when the Li+ content was low (<1 mol %) where major PL enhancement was observed. Therefore, we reason that the enhanced PL mainly results from the shallow levels created by the interstitial Li+.

Lateral heat flow distribution and defect-dependent thermal resistance in an individual silicon nanowire.

Studies aiming to significantly improve thermal properties, such as figure-of-merit, of silicon nanowires (SiNW) have focused on diameter reduction and surface or interface roughness control. However, the mechanism underlying thermal conductivity enhancement of roughness controlled NWs remains unclear. Here, we report a significant influence of stacking faults (SFs) on the lateral thermal conductivity of a single SiNW, using a combination of newly developed in situ spatially-resolved thermal resistance experiments and high-resolution transmission electron microscopy measurements. We used as-grown SiNWs tapered along the growth direction with progressively lower roughness and SFs density. The results clearly confirmed that both surface roughness and twins or SFs densities suppress the thermal conductivity of an individual SiNW. The results and measurement techniques presented here hold great potential for inspecting minute changes in thermal resistance along an individual SiNW, caused by induced SFs on the nanostructure, and for improving one-dimensional nanowire-based thermoelectric device performance.

Fluorescence melting curve analysis using self-quenching dual-labeled peptide nucleic acid probes for simultaneously identifying multiple DNA sequences.

Previous fluorescence melting curve analysis (FMCA) used intercalating dyes, and this method has restricted application. Therefore, FMCA methods such as probe-based FMCA and molecular beacons were studied. However, the usual dual-labeled probes do not possess adequate fluorescence quenching ability and sufficient specificity, and molecular beacons with the necessary stem structures are hard to design. Therefore, we have developed a peptide nucleic acid (PNA)-based FMCA method. PNA oligonucleotide can have a much higher melting temperature (Tm) value than DNA. Therefore, short PNA probes can have adequate Tm values for FMCA, and short probes can have higher specificity and accuracy in FMCA. Moreover, dual-labeled PNA probes have self-quenching ability via single-strand base stacking, which makes PNA more favorable. In addition, this method can facilitate simultaneous identification of multiple DNA templates. In conventional real-time polymerase chain reaction (PCR), one fluorescence channel can identify only one DNA template. However, this method uses two fluorescence channels to detect three types of DNA. Experiments were performed with one to three different DNA sequences mixed in a single tube. This method can be used to identify multiple DNA sequences in a single tube with high specificity and high clarity.

Clinical outcome of low-grade central osteosarcoma and role of CDK4 and MDM2 immunohistochemistry as a diagnostic adjunct.

INTRODUCTION: Low-grade osteosarcoma encompasses parosteal osteosarcoma (POS) and low-grade central osteosarcoma (LCOS), with LCOS more rare than POS. LCOS is also more likely to be misdiagnosed and inappropriately treated with an intralesional procedure, due to its misleading radiological features and the overlap of its pathological characteristics with those of benign bone tumors. Therefore, as a diagnostic adjunct for LCOS, immunohistochemical assay with murine double-minute type 2 (MDM2) and cyclin-dependent kinase 4 (CDK4) have been tried with controversial results. We investigated (1) the clinical course and surgical outcome of LCOS, and (2) the diagnostic role of immune-histochemical markers (CDK4, MDM2) and their correlation with clinico-radiologic findings. MATERIALS AND METHODS: We retrospectively reviewed 16 LCOS patients with regard to age, gender, tumor location, plain radiographic pattern, tumor volume, extraosseous extension, initial diagnosis, initial treatment, definitive diagnosis, definitive treatment, surgical margins, histochemical markers, and oncological outcome. RESULTS: Final survival status was continuous disease-free in 14, alive with disease in 1, and remaining 1 patient died of other cancer. Except for 1 patient who had not undergone excision of their primary lesion, no patients developed a local recurrence. Eight tumors (50%) showed diffuse immunostaining for CDK4. Three of 8 tumors labeled for CDK4 were also positive for MDM2. Six (75%) of 8 CDK4-positive tumors displayed lytic lesions on a plain radiograph; in contrast, 2 (33%) of 6 tumors showing a sclerotic pattern on a plain radiograph were positive for CDK4. CONCLUSIONS: The diagnosis of LCOS is challenging; however, if it is properly diagnosed, there is a high chance of a cure with wide excision alone. Positive immunostaining for CDK4 or MDM2 may be used as a diagnostic adjunct, although negative immunostaining cannot rule out this tumor. The clinical, radiological, and typical pathological findings are vital in raising the suspicion of this rare tumor.

Spontaneous necrosis and additional tumor necrosis induced by preoperative chemotherapy for osteosarcoma: a case-control study.

BACKGROUND: Extent of spontaneous necrosis in untreated osteosarcoma may imply tumor aggressiveness. Reports regarding this issue are scarce and there are several points to be clarified; (1) the correlation between tumor size and extent of spontaneous necrosis displayed was conflicting, (2) whether there is difference in necrosis rate between intra- and extra-medullary portion of tumor is not described, if it does, its relation with other clinico-pathologic variables, (3) in patients with surgical treatment only, >20 % spontaneous necrosis was a poor prognostic factor, however, whether that cutoff is still valid in chemotherapy cohort remains to be determined, (4) expected additional tumor necrosis by chemotherapy was made by simply comparing the necrosis rates of untreated and treated osteosarcoma cohort. METHODS: We evaluated spontaneous necrosis in 43 osteosarcoma patients (39 Stage IIB, 4 Stage III). We evaluated overall necrosis rate and separately evaluated the necrosis rate of intra- and extra-medullary portion of tumor. These results were compared with other clinico-pathologic variables. To evaluate additional tumor necrosis induced by neoadjuvant chemotherapy, case (38 without preoperative chemotherapy)-control (76 with preoperative chemotherapy) study was performed. RESULTS: The mean spontaneous necrosis rate was 23 %. Overall spontaneous necrosis was not associated with tumor volume. Necrosis rate of extramedullary tumors was higher in cases of large tumors (p = 0.02). In patients with upfront surgery followed by chemotherapy, 5-year event-free survival rate of patients with >20 and <20 % spontaneous necrosis were 82 ± 17 and 79 ± 18.5 %, respectively (p = 0.75). After chemotherapy, regardless of tumor volume and location, control group tumors showed an increase in the tumor necrosis of approximately 50 %. CONCLUSION: In chemotherapy era, the extent of spontaneous necrosis has no relation with survival. The expected additional tumor-killing effect of preoperative chemotherapy is around 50 % of initial tumor volume.

Fluorescent dye labeled iron oxide/silica core/shell nanoparticle as a multimodal imaging probe.

PURPOSE: To develop an MRI/optical multimodal imaging probe based on dye-conjugated iron oxide/silica core/shell nanoparticle, and investigate the distance-dependent fluorescence quenching through careful control of the distance between the iron oxide core and fluorescent dyes. METHODS: Different size of core/shell nanoparticles were prepared by varying the silica shell width. PEGylation on the surface of silica shell was followed to improve the stability of particles in the physiological condition. In vitro cytotoxicity was evaluated by the MTT assay on a HeLa cell line and in vivo imaging of subcutaneous SCC7 xenografted mice was performed using MRI/optical imaging modalities. RESULTS: Diameter and ζ-potential of the nanoparticles were measured, and TEM images demonstrated the mono-disperse nature of the particles. Quenching efficiency of the dyes on the surface was nearly 100% in the smallest nanoparticle, while almost no quenching effect was observed for the largest nanoparticle. In vitro cytotoxicity showed nearly 90% cell viability at 0.15 Fe mg/mL, a comparable concentration for clinical use. The tumor area was significantly darkened after the nanoparticle injection due to the high transverse relaxivity value of the nanoparticles. Fluorescence signal was affected by the particle size due to the distance-dependent quenching/dequenching behaviour.

Measurement of anterior scleral curvature using anterior segment OCT.

PURPOSE: To investigate and validate methods for measuring the radius of anterior scleral curvature using anterior segment optical coherence tomography images. METHODS: Twenty-four volunteers were enrolled in this study. Anterior segment optical coherence tomography images, centered on horizontal/vertical limbus, including adjacent anterior sclera, were obtained in addition to conventional images centered on the optical axis. Central horizontal, nasal, and temporal optical coherence tomography images were consolidated to a new image for subsequent analyses. The reference points of limbal surface and three scleral points were marked nasally and temporally. The radius of a best-fit circle to the six scleral points was derived (the BFC [best-fit circle] method) and the radii of two circles, the centers of which are on the optical axis and pass through the points of the scleral surface at 2 mm from the limbus nasally and temporally, were calculated (the axial method). To assess the reliability and accuracy of each method, intraobserver and interobserver agreements were analyzed and the radii of contact lenses with known curvatures were measured. RESULTS: The mean (±SD) radius of a BFC was 13.12 (±0.80) mm. The mean (±SD) radius of nasal anterior scleral curvature (13.33 ± 1.12 mm) was significantly greater than that of temporal anterior scleral curvature (12.32 ± 0.77 mm) (paired samples t test, p < 0.001). The BFC and axial methods showed excellent intraobserver and interobserver agreements for measurements (intraclass correlation coefficient > 0.75, p < 0.001), whereas both methods showed a tendency to slightly underestimate the actual curvature of a rigid contact lens of known dimensions (-0.07 ± 0.13 mm [the BFC method] and -0.19 ± 0.07 mm [the axial method], Wilcoxon signed rank test, p = 0.173 and p = 0.028, respectively). CONCLUSIONS: Anterior segment optical coherence tomography is a valuable tool for measuring the radii of anterior scleral curvatures by image processing and mathematical calculation and can provide useful information in specific clinical situations such as designing scleral lenses.

Micropigmentation: camouflaging scalp alopecia and scars in Korean patients.

BACKGROUND: The aim of this study was to identify the usefulness of micropigmentation as a technique for alopecia and scalp scar camouflage in Korean patients. METHODS: Micropigmentation was performed in 43 Korean patients from November 2011 to October 2012. There were 23 female patients with female pattern hair loss (FPHL), 14 male patients with male pattern baldness, and 6 patients with scalp scars. RESULTS: The results for one patient with FPHL Ludwig stage I were satisfactory according to the physician's assessment, but the patient was dissatisfied because she did not notice any remarkable changes after the procedure. The results for the other 42 patients were highly satisfactory and there were no adverse effects or complications. CONCLUSIONS: Micropigmentation appears to be a good method for camouflaging hair loss and scalp scars. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Colloidal Synthesis of P-Type Zn3As2 Nanocrystals.

Zinc pnictides, particularly Zn3As2, hold significant promise for optoelectronic applications owing to their intrinsic p-type behavior and appropriate bandgaps. However, despite the outstanding properties of colloidal Zn3As2 nanocrystals, research in this area is lacking because of the absence of suitable precursors, occurrence of surface oxidation, and intricacy of the crystal structures. In this study, a novel and facile solution-based synthetic approach is presented for obtaining highly crystalline p-type Zn3As2 nanocrystals with accurate stoichiometry. By carefully controlling the feed ratio and reaction temperature, colloidal Zn3As2 nanocrystals are successfully obtained. Moreover, the mechanism underlying the conversion of As precursors in the initial phases of Zn3As2 synthesis is elucidated. Furthermore, these nanocrystals are employed as active layers in field-effect transistors that exhibit inherent p-type characteristics with native surface ligands. To enhance the charge transport properties, a dual passivation strategy is introduced via phase-transfer ligand exchange, leading to enhanced hole mobilities as high as 0.089 cm2 V-1 s-1. This study not only contributes to the advancement of nanocrystal synthesis, but also opens up new possibilities for previously underexplored p-type nanocrystal research.

Hexagonally ordered nanoparticles templated using a block copolymer film through Coulombic interactions.

We present a novel and simple method for forming hexagonal gold nanoparticle arrays that uses Coulombic interactions between negatively charged gold nanoparticles on positively charged vertically oriented poly(4-vinylpyridine) cylinders formed in a spin cast polystyrene-b-poly(4-vinylpyridine) block copolymer film. Exposure of the block copolymer film to dibromobutane vapor quaternizes and crosslinks the poly(4-vinylpyridine) domains which allows for the templated deposition of gold nanoparticles into a self-assembled hexagonal array through electrostatic interactions. These systems can form the basis for sensors or next generation nanoparticle based electronics.