Electron Redistribution of Ru Site on MoO2@NiMoO4 Support for Efficient Ampere-Level Current Density Electrolysis of Alkaline Seawater.

Seawater electrolysis is a promising but challenging strategy to generate carbon-neutral hydrogen. A grand challenge for hydrogen evolution reaction (HER) from alkaline seawater electrolysis is the development of efficient and stable electrocatalysts to overcome the limitation of sluggish kinetics. Here, a 3D nanorod hybrid catalyst is reported, which comprises heterostructure MoO2@NiMoO4 supported Ru nanoparticles (Ru/ MoO2@NiMoO4) with a size of ≈5 nm. Benefitting from the effect of strongly coupled interaction, Ru/MoO2@NiMoO4 catalyst exhibits a remarkable alkaline seawater hydrogen evolution performance, featured by a low overpotential of 184 mV at a current density of 1.0 A cm-2, superior to commercial Pt/C (338 mV). Experimental observations demonstrate that the heterostructure MoO2@NiMoO4 as an electron-accepting support makes the electron transfer from the Ru nanoparticles to MoO2, and thereby implements the electron redistribution of Ru site. Mechanistic analysis elucidates that the electron redistribution of active Ru site enhances the ability of hydrogen desorption, thereby promoting alkaline seawater HER kinetics and finally leading to a satisfactory catalysis performance at ampere-level current density of alkaline seawater electrolysis.

Mechanistic insights into high-throughput screening of tandem catalysts for CO2 reduction to multi-carbon products.

In carbon dioxide electrochemical reduction (CO2ER), since isolated catalysts encounter challenges in meeting the demands of intricate processes for producing multi-carbon (C2+) products, tandem catalysis is emerging as a promising approach. Nevertheless, there remains an insufficient theoretical understanding of designing tandem catalysts. Herein, we utilized density functional theory (DFT) to screen 80 tandem catalysts for efficient CO2ER to C2 products systematically, which combines the advantages of nitrogen-doped carbon-supported transition metal single-atom catalysts (M-N-C) and copper clusters. Three crucial criteria were designed to select structures for generation and transfer of *CO and facilitate C-C coupling. The optimal Cu/RuN4-pl catalyst exhibited an excellent ethanol production capacity. Additionally, the relationship between CO adsorption strength and transfer energy barrier was established, and the influence of the electronic structure on its adsorption strength was studied. This provided a novel and well-considered solution and theoretical guidance for the design of rational composition and structurally superior tandem catalysts.

Electrochemical C-N coupling of CO2 and nitrogenous small molecules for the electrosynthesis of organonitrogen compounds.

Electrochemical C-N coupling reactions based on abundant small molecules (such as CO2 and N2) have attracted increasing attention as a new "green synthetic strategy" for the synthesis of organonitrogen compounds, which have been widely used in organic synthesis, materials chemistry, and biochemistry. The traditional technology employed for the synthesis of organonitrogen compounds containing C-N bonds often requires the addition of metal reagents or oxidants under harsh conditions with high energy consumption and environmental concerns. By contrast, electrosynthesis avoids the use of other reducing agents or oxidants by utilizing "electrons", which are the cleanest "reagent" and can reduce the generation of by-products, consistent with the atomic economy and green chemistry. In this study, we present a comprehensive review on the electrosynthesis of high value-added organonitrogens from the abundant CO2 and nitrogenous small molecules (N2, NO, NO2-, NO3-, NH3, etc.) via the C-N coupling reaction. The associated fundamental concepts, theoretical models, emerging electrocatalysts, and value-added target products, together with the current challenges and future opportunities are discussed. This critical review will greatly increase the understanding of electrochemical C-N coupling reactions, and thus attract research interest in the fixation of carbon and nitrogen.

Regulating Spin Polarization via Axial Nitrogen Traction at Fe-N5 Sites Enhanced Electrocatalytic CO2 Reduction for Zn-CO2 Batteries.

Single Fe sites have been explored as promising catalysts for the CO2 reduction reaction to value-added CO. Herein, we introduce a novel molten salt synthesis strategy for developing axial nitrogen-coordinated Fe-N5 sites on ultrathin defect-rich carbon nanosheets, aiming to modulate the reaction pathway precisely. This distinctive architecture weakens the spin polarization at the Fe sites, promoting a dynamic equilibrium of activated intermediates and facilitating the balance between *COOH formation and *CO desorption at the active Fe site. Notably, the synthesized FeN5, supported on defect-rich in nitrogen-doped carbon (FeN5@DNC), exhibits superior performance in CO2RR, achieving a Faraday efficiency of 99 % for CO production (-0.4 V vs. RHE) in an H-cell, and maintaining a Faraday efficiency of 98 % at a current density of 270 mA cm-2 (-1.0 V vs. RHE) in the flow cell. Furthermore, the FeN5@DNC catalyst is assembled as a reversible Zn-CO2 battery with a cycle durability of 24 hours. In situ IR spectroscopy and density functional theory (DFT) calculations reveal that the axial N coordination traction induces a transformation in the crystal field and local symmetry, therefore weakening the spin polarization of the central Fe atom and lowering the energy barrier for *CO desorption.

Accelerated Proton-Coupled Electron Transfer via Engineering Palladium Sub-Nanoclusters for Scalable Electrosynthesis of Hydrogen Peroxide.

Electrosynthesis of H2O2 from oxygen reduction reaction via a two-electron pathway is vital as an alternative for the energy-intensive anthraquinone process. However, this process is largely hindered in neutral and alkaline conditions due to sluggish kinetics associated with the transformation of intermediate O2* into OOH* via proton-coupled electron transfer sourced from slow water dissociation. Herein, we developed Pd sub-nanoclusters on the nickel ditelluride nanosheets (Pd SNCs/NiTe2) to enhance the performance of H2O2 electrosynthesis. The newly-developed Pd SNCs/NiTe2 exhibited a H2O2 selectivity of as high as 99 % and a positive shift of onset potential up to 0.81 V. Combined theoretical calculations and experimental studies (e.g., X-ray absorption and attenuated total reflectance-Fourier transform infrared spectra measurements) revealed that the Pd sub-nanoclusters supported by NiTe2 nanosheets efficiently reduced the energy barrier of water dissociation to generate more protons, facilitating the proton feeding kinetics. When used in a flow cell, Pd SNCs/NiTe2 cathode efficiently produced H2O2 with a maximum yield rate of 1.75 mmol h-1 cm-2 and a current efficiency of 95 % at 100 mA cm-2. Further, an accumulated H2O2 concentration of 1.43 mol L-1 was reached after 10 hours of continuous electrolysis, showing the potential for practical H2O2 electrosynthesis.

Designs of Tandem Catalysts and Cascade Catalytic Systems for CO2 Upgrading.

Upgrading CO2 into multi-carbon (C2+) compounds through the CO2 reduction reaction (CO2 RR) offers a practical approach to mitigate atmospheric CO2 while simultaneously producing high value chemicals. The reaction pathways for C2+ production involve multi-step proton-coupled electron transfer (PCET) and C-C coupling processes. By increasing the surface coverage of adsorbed protons (*Had ) and *CO intermediates, the reaction kinetics of PCET and C-C coupling can be accelerated, thereby promoting C2+ production. However, *Had and *CO are competitively adsorbed intermediates on monocomponent catalysts, making it difficult to break the linear scaling relationship between the adsorption energies of the *Had /*CO intermediate. Recently, tandem catalysts consisting of multicomponents have been developed to improve the surface coverage of *Had or *CO by enhancing water dissociation or CO2 -to-CO production on auxiliary sites. In this context, we provide a comprehensive overview of the design principles of tandem catalysts based on reaction pathways for C2+ products. Moreover, the development of cascade CO2 RR catalytic systems that integrate CO2 RR with downstream catalysis has expanded the range of potential CO2 upgrading products. Therefore, we also discuss recent advancements in cascade CO2 RR catalytic systems, highlighting the challenges and perspectives in these systems.

Accelerated Transfer and Spillover of Carbon Monoxide through Tandem Catalysis for Kinetics-boosted Ethylene Electrosynthesis.

Cu-based catalysts have been widely applied in electroreduction of carbon dioxide (CO2 ER) to produce multicarbon (C2+ ) feedstocks (e.g., C2 H4 ). However, the high energy barriers for CO2 activation on the Cu surface is a challenge for a high catalytic efficiency and product selectivity. Herein, we developed an in situ *CO generation and spillover strategy by engineering single Ni atoms on a pyridinic N-enriched carbon support with a sodalite (SOD) topology (Ni-SOD/NC) that acted as a donor to feed adjacent Cu nanoparticles (NPs) with *CO intermediate. As a result, a high C2 H4 selectivity of 62.5 % and an industrial-level current density of 160 mA cm-2 at a low potential of -0.72 V were achieved. Our studies revealed that the isolated NiN3 active sites with adjacent pyridinic N species facilitated the *CO desorption and the massive *CO intermediate released from Ni-SOD/NC then overflowed to Cu NPs surface to enrich the *CO coverage for improving the selectivity of CO2 ER to C2 H4 .

Single-atom Iron Catalyst with Biomimetic Active Center to Accelerate Proton Spillover for Medical-level Electrosynthesis of H2 O2 Disinfectant.

Electrosynthesis of H2 O2 has great potential for directly converting O2 into disinfectant, yet it is still a big challenge to develop effective electrocatalysts for medical-level H2 O2 production. Herein, we report the design and fabrication of electrocatalysts with biomimetic active centers, consisting of single atomic iron asymmetrically coordinated with both nitrogen and sulfur, dispersed on hierarchically porous carbon (FeSA -NS/C). The newly-developed FeSA -NS/C catalyst exhibited a high catalytic activity and selectivity for oxygen reduction to produce H2 O2 at a high current of 100 mA cm-2 with a record high H2 O2 selectivity of 90 %. An accumulated H2 O2 concentration of 5.8 wt.% is obtained for the electrocatalysis process, which is sufficient for medical disinfection. Combined theoretical calculations and experimental characterizations verified the rationally-designed catalytic active center with the atomic Fe site stabilized by three-coordinated nitrogen atoms and one-sulfur atom (Fe-N3 S-C). It was further found that the replacement of one N atom with S atom in the classical Fe-N4 -C active center could induce an asymmetric charge distribution over N atoms surrounding the Fe reactive center to accelerate proton spillover for a rapid formation of the OOH* intermediate, thus speeding up the whole reaction kinetics of oxygen reduction for H2 O2 electrosynthesis.

Complexation Behaviors of a Tridentate Phenanthroline Carboxamide Ligand with Trivalent f-Block Elements in Different Anion Systems: A Thermodynamic and Crystallographic Perspective.

The counteranion has a strong influence on the complexation behavior of tridentate phenanthroline carboxamide ligands with actinides and lanthanides, but the thermodynamic and underlying interaction mechanism at the molecular level is still not clear. In this work, a tridentate ligand, N-ethyl-N-tolyl-2-amide-1,10-phenanthroline (Et-Tol-PTA), was synthesized, and the effects of different anions (Cl-, NO3-, and ClO4-) on the complexation behavior of Et-Tol-PTA with typical lanthanides were thoroughly studied by using 1H nuclear magnetic resonance (NMR) spectroscopy, ultraviolet-visible (UV-vis) spectrophotometry, and single-crystal X-ray diffraction. The NMR spectroscopic titration of Lu(III) showed that there were three species (1:1, 2:1, and 3:1 ligand-metal complexes) formed in Cl- solution systems while two species (2:1 and 1:1) were formed in NO3- and ClO4- solution systems. When Et-Tol-PTA was titrated with La(III), two species (2:1 and 1:1) were formed in NO3- systems and only one species (1:1) was formed in Cl- and ClO4- systems. In addition, the stability constant was determined via UV-vis spectroscopic titration, which showed that the complexation strength between Et-Tol-PTA and Eu(III) decreased in the following order: ClO4- > NO3- > Cl-. This indicated that Et-Tol-PTA had the strongest complexation ability with Eu(III) in the ClO4- system. The structures of Et-Tol-PTA complexed with EuCl3, Eu(NO3)3, and Eu(ClO4)3 were further elucidated by single-crystal X-ray diffraction and agreed well with the results of UV-vis titration experiments. The results of this work revealed that the mechanisms of complexation of lanthanides with the asymmetric ligand Et-Tol-PTA were strongly affected by different anionic environments in solution and in the solid state. These findings may lead to the improvement of the separation of trivalent actinides and lanthanides in nuclear waste.

Two-Fold Interlocking Cationic Metal-Organic Framework Material with Exchangeable Chloride for Perrhenate/Pertechnetate Sorption.

Albeit reported substantial sorbents for elimination of TcO4-, the issue of secondary contamination caused by released counterions (such as NO3-) from the cationic metal-organic framework (MOF) has not come into the sufficient limelight for researchers. Herein, our efforts are dedicated to settle the matter through synthesis of NiCl2 based on the cationic MOF (ZJU-X4). Less harmful chlorides are used as exchangeable anions for replacing hazardous anions. Notably, ZJU-X4 exhibited fast sorption kinetics, high sorption capacity of 395 mg/g, decent selectivity, and excellent reusability in four recycles. The results of ion chromatography revealed that the released chloride ion was equal to sorption of target ions, and pair distribution functions were employed to analyze the changes in ZJU-X4 after sorption of ReO4-, clearly elucidating the anion-exchange mechanism. Furthermore, in the dynamic sorption experiments, ReO4- could be facilely and effectively removed and recovered, showing the value of practical applications. This work indicated that cationic MOF-based metal chloride salts would be a better choice for anionic sorbents.

ZnCl2: A Green Brønsted Acid for Selectively Recovering Rare Earth Elements from Spent NdFeB Permanent Magnets.

The spent neodymium-iron-boron (NdFeB) magnet is a highly valuable secondary resource of rare earth elements (REEs). Hydrometallurgical processes are widely used in recovering REEs from spent NdFeB magnets, but they will consume large amounts of organic chemicals, leading to severe environmental pollution. This work developed an alternative green route to selectively recover REEs from spent NdFeB permanent magnets using a purely inorganic zinc salt. The Hammett acidity measurement showed that concentrated ZnCl2 solutions could be regarded as a strong Brønsted acid. Concentrated ZnCl2 solutions achieved a high separation factor (>1 × 105) between neodymium and iron through simple dissolution of their corresponding oxide mixture. In the simulated recovery process of spent NdFeB magnets, the Nd2O3 product was successfully recovered with a purity close to 100% after selective leaching by ZnCl2 solution, sulfate double-salt precipitation, and oxalic acid precipitation. The separation performance of the ZnCl2 solution for Nd2O3 and Fe2O3 remained almost unchanged after four cycles. The energy consumption and chemical inputs of this process are about 1/10 and half of the traditional hydrometallurgy process separately. This work provides a promising approach for the green recovery of secondary REE resources.

Deciphering Single-Bacterium Adhesion Behavior Modulated by Extracellular Electron Transfer.

For bacterial adhesion and biofilm formation, a thorough understanding of the mechanism and effective modulating is lacking due to the complex extracellular electron transfer (EET) at bacteria-surface interfaces. Here, we explore the adhesion behavior of a model electroactive bacteria under various metabolic conditions by an integrated electrochemical single-cell force microscopy system. A nonlinear model between bacterial adhesion force and electric field intensity is established, which provides a theoretical foundation for precise tuning of bacterial adhesion strength by the surface potential and the direction and flux of electron flow. In particular, based on quantitative analyses with equivalent charge distribution modeling and wormlike chain numerical simulations, it is demonstrated that the chain conformation and unfolding events of outer membrane appendages are dominantly impacted by the dynamic bacterial EET processes. This reveals how the anisotropy of bacterial conductive structure can translate into the desired adhesion behavior in different scenarios.

Promoting CO2 Electroreduction Kinetics on Atomically Dispersed Monovalent ZnI Sites by Rationally Engineering Proton-Feeding Centers.

Electrocatalytic reduction of CO2 (CO2 RR) to value-added chemicals is of great significance for CO2 utilization, however the CO2 RR process involving multi-electron and proton transfer is greatly limited by poor selectivity and low yield. Herein, We have developed an atomically dispersed monovalent zinc catalyst anchored on nitrogenated carbon nanosheets (Zn/NC NSs). Benefiting from the unique coordination environment and atomic dispersion, the Zn/NC NSs exhibit a superior CO2 RR performance, featuring a high current density up to 50 mA cm-2 with an outstanding CO Faradaic efficiency of ≈95 %. The center ZnI atom coordinated with three N atoms and one N atom that bridges over two adjacent graphitic edges (Zn-N3+1 ) is identified as the catalytically active site. Experimental results reveal that the twisted Zn-N3+1 structure accelerates CO2 activation and protonation in the rate-determining step of *CO2 to *COOH, while theoretical calculations elucidate that atomically dispersed Zn-N3+1 moieties decrease the potential barriers for intermediate COOH* formation, promoting the proton-coupled CO2 RR kinetics and boosting the overall catalytic performance.

Unveiling the Uncommon Fluorescent Recognition Mechanism towards Pertechnetate Using a Cationic Metal-Organic Framework Bearing N-Heterocyclic AIE Molecules.

As one of most problematic radionuclides, technetium-99, mainly in the form of anionic pertechnetate (TcO4 - ), exhibits high environmental mobility, long half-life, and radioactive hazard. Due to low charge density and high hydrophobicity for this tetrahedral anion, it is extremely difficult to recognize it in water. Seeking efficient and selective recognition method for TcO4 - is still a big challenge. Herein, a new water-stable cationic metal-organic framework (ZJU-X8) was reported, bearing tetraphenylethylene pyrimidine-based aggregation-induced emission (AIE) ligands and attainable silver sites for TcO4 - detection. ZJU-X8 underwent an obvious spectroscopic change from brilliant blue to flavovirens and exhibited splendid selectivity towards TcO4 - . This uncommon fluorescent recognition mechanism was well elucidated by batch sorption experiments and DFT calculations. It was found that only TcO4 - could enter into the body of ZJU-X8 through anion exchange whereas other competing anions were excluded outside. Subsequently, after interaction between TcO4 - and silver ions, the electron polarizations from pyrimidine rings to Ag+ cations significantly lowered the energy level of the π* orbital and thus reduced the π-π* energy gap, resulting in a red-shift in the fluorescent spectra.

Comparative Investigation into the Complexation and Extraction Properties of Tridentate and Tetradentate Phosphine Oxide-Functionalized 1,10-Phenanthroline Ligands toward Lanthanides and Actinides.

Two new phosphine oxide-functionalized 1,10-phenanthroline ligands, tetradentate 2,9-bis(butylphenylphosphine oxide)-1,10-phenanthroline (BuPh-BPPhen, L1 ) and tridentate 2-(butylphenylphosphine oxide)-1,10-phenanthroline (BuPh-MPPhen, L2 ), were synthesized and studied comparatively for their coordination with trivalent actinides and lanthanides. The complexation mechanisms of these two ligands toward trivalent f-block elements were thoroughly elucidated by NMR spectroscopy, UV/vis spectrophotometry, fluorescence spectrometry, single-crystal X-ray diffraction, solvent extraction, and theoretical calculation methods. NMR titration results demonstrated that 1 : 1 and 1 : 2 (metal to ligand) lanthanides complexes formed for L1 , whereas 1 : 1, 1 : 2 and 1 : 3 lanthanide complexes formed for L2 in methanol. The formation of these species was validated by fluorescence spectrometry, and the corresponding stability constants for the complexes of NdIII with L1 and L2 were determined by using UV/vis spectrophotometry. Structures of the 10-coordinated 1 : 1-type complexes of EuL1 (NO3 )3 and [EuL2 (NO3 )3 (H2 O)] Et2 O in the solid state were characterized by X-ray crystallography. In solvent-extraction experiments, L1 exhibited extremely strong extraction ability for both AmIII and EuIII , whereas L2 showed nearly no extraction toward AmIII or EuIII due to its high hydrophilicity. Finally, the structures and bonding natures of the complex species formed between AmIII /EuIII and L1 /L2 were analyzed in DFT calculations.

Constructing Cationic Metal-Organic Framework Materials Based on Pyrimidyl as a Functional Group for Perrhenate/Pertechnetate Sorption.

Cationic metal-organic framework (MOF) materials are widely used in the anion separation field, but there are few reports of pyrimidyl ligands as building units. In this work, three new cationic MOFs based on pyrimidyl as functional group ligands were synthesized for the removal of radioactive pertechnetate from aqueous solution. The pyrimidyl ligands were designed by incorporating pyrimidyl units into the skeletons of benzene, triphenylamine, and tetraphenylethylene, respectively. Taking advantage of multiple coordination sites of pyrimidyl groups, three cationic MOFs (ZJU-X11, ZJU-X12, and ZJU-X13) with diverse structures were solvothermally synthesized using silver ion as the metal node. Scanning electron microscopy-energy-dispersive spectroscopy mapping demonstrated that these three cationic MOFs could capture ReO4- via anion exchange, but the sorption capabilities were distinctly different. With 95% removal toward ReO4-, ZJU-X11 showed the strongest anion-exchange competence among the three MOFs. According to the results of batch experiments, ZJU-X11 could achieve sorption equilibrium within 10 min, remove 518 mg of ReO4- per 1 g of ZJU-X11, remove most of ReO4- after four recycles, and maintain satisfactory selectivity in the presence of excess competing anions, which is one of the best MOF materials for removing ReO4-/TcO4- among the three cationic MOFs. This work indicates that the pyrimidyl group is a promising multiple site to build versatile cationic MOFs.

Influence of a N-Heterocyclic Core on the Binding Capability of N,O-Hybrid Diamide Ligands toward Trivalent Lanthanides and Actinides.

N,O-hybrid diamide ligands with N-heterocyclic skeletons are one of the promising extractants for the selective separation of actinides over lanthanides in a highly acidic HNO3 solution. In this work, three hard-soft donor mixed diamide ligands, pyridine-2,6-diylbis(pyrrolidin-1-ylmethanone) (Pyr-PyDA), 2,2'-bipyridine-6,6'-diylbis(pyr-rolidine-1-ylmethanone) (Pyr-BPyDA), and (1,10-phenanthroline-2,9-diyl)bis(pyrrolidin-1-ylmethanone) (Pyr-DAPhen), were synthesized and used to probe the influence of N-heterocyclic cores on the complexation and extraction behaviors with trivalent lanthanides and actinides. 1H NMR titration experiments demonstrated that 1:1 metal-to-ligand complexes were mainly formed between the three ligands and lanthanides, but 1:2 type complexes were also formed between tridentate Pyr-PyDA and Lu(III). The stability constants (log ß) of these three ligands with two typical lanthanides, Nd(III) and Eu(III), were determined through spectrophotometric titration. It is found that Pyr-DAPhen formed the most stable complexes, while Pyr-PyDA formed the most unstable complexes with lanthanides, which coincided well with the following solvent extraction results. The solid-state structures of 1:1 type complexes of these three ligands with La(III), Nd(III), and Er(III) in nitrate media were identified by a single-crystal X-ray diffraction technique. Nd(III) and Er(III) were 10-coordinated with Pyr-PyDA, Pyr-BPyDA, and Pyr-DAPhen via one ligand molecule and three nitrate ions. La(III), because of its larger ionic radius, was 11-coordinated with Pyr-DAPhen through one ligand molecule, three nitrate ions, and one methanol molecule. Solvent extraction experiments showed that the preorganized phenanthroline-derived Pyr-DAPhen had the best extraction performance for trivalent actinide among the three ligands tested. This work provides some experimental insights into the design of more efficient ligands for trivalent actinide separation by adjusting the N-heterocyclic cores.

Unfolding the Extraction and Complexation Behaviors of Trivalent f-Block Elements by a Tetradentate N,O-Hybrid Phenanthroline Derived Phosphine Oxide Ligand.

In this work, a tetradentate N,O-hybrid 2,9-bis(diphenylphosphine oxide)-1,10-phenanthroline (Ph2-BPPhen) ligand was studied for the coextraction of trivalent f-block elements from nitric acid media. The extraction as well as the complexation behaviors of Ph2-BPPhen with f-block elements were thoroughly investigated using 31P and 1H NMR spectrometry, UV-vis spectrophotometry, single crystal X-ray diffraction, and density functional theoretical (DFT) calculation. Ph2-BPPhen exhibits remarkably extraction ability for both Am(III) and Eu(III) and more than 99.5% of Am(III) and Eu(III) were extracted from 1.0 M HNO3 solution. Slope analysis suggests that both 2:1 and 1:1 ligand/metal complexes were probably formed during the extraction. The 1:1 and 2:1 Ln(III) complexes with Ph2-BPPhen were also identified in CH3OH solution by NMR spectrometry, and the stability constants were determined via UV-vis spectrophotometry. Structures of the 1:1 Eu(Ph2-BPPhen)(NO3)3 and Am(Ph2-BPPhen)(NO3)3 complexes were further elucidated by single X-ray crystallography and DFT calculations. The higher extractability of Ph2-BPPhen toward trivalent Am(III) and Eu(III) compared with the previously reported phenanthroline-derived amide and phosphonate ligands was attributed to the stronger affinity of the -P═O(R)2 group to metal ions. The results from this work indicate that the N,O-hybrid 1,10-phenanthroline derived phosphine oxide ligand can serve as a new and promising candidate for coextraction of trivalent f-block elements in the treatment of nuclear waste.

Graphene-modified graphite paper cathode for the efficient bioelectrochemical removal of chromium.

Metal-free electrocatalysts have been widely used as cathodes for the reduction of hexavalent chromium [Cr(VI)] in microbial fuel cells (MFCs). The electrocatalytic activity of such system needs to be increased due to the low anodic potential provided by bacteria. In this study, graphite paper (GP) was treated by liquid nitrogen to form three-dimensional graphite foam (3DGF), improving the Cr(VI) reduction by 17% and the total Cr removal by 81% at 30 h in MFCs. X-ray absorption spectroscopy confirmed the Cr(VI) reduction product as Cr(OH)3. Through the spectroscopy characterizations, electrochemical measurements, and density functional theory calculations, the porous structures, edges, and O-doped defects on the 3DGF surface resulted in a higher electroconducting rate and a lower mass transfer rate, which provide more active sites for the Cr(VI) reduction. Additionally, the scrolled graphene-like carbon nanosheets and porous structures on the 3DGF surface might limit the OH- diffusion and result in a high local pH, which accelerated the Cr(OH)3 formation. The results of this study are expected to provide a simple method to manipulate the carbon materials and insights into mechanisms of Cr(VI) reduction in MFCs by the 3DGF with in situ exfoliated edges and O-functionalized graphene.

Boosting Electroreduction Kinetics of Nitrogen to Ammonia via Tuning Electron Distribution of Single-Atomic Iron Sites.

Electrocatalytic nitrogen reduction reaction (NRR) plays a vital role for next-generation electrochemical energy conversion technologies. However, the NRR kinetics is still limited by the sluggish hydrogenation process on noble-metal-free electrocatalyst. Herein, we report the rational design and synthesis of a hybrid catalyst with atomic iron sites anchored on a N,O-doped porous carbon (FeSA -NO-C) matrix of an inverse opal structure, leading to a remarkably high NH3 yield rate of 31.9 µg NH 3 h-1 mg-1 cat. and Faradaic efficiency of 11.8 % at -0.4 V for NRR electrocatalysis, outperformed almost all previously reported atomically dispersed metal-nitrogen-carbon catalysts. Theoretical calculations revealed that the observed high NRR catalytic activity for the FeSA -NO-C catalyst stemmed mainly from the optimized charge-transfer between the adjacent O and Fe atoms homogenously distributed on the porous carbon support, which could not only significantly facilitate the transportation of N2 and ions but also effectively decrease the binding energy between the isolated Fe atom and *N2 intermediate and the thermodynamic Gibbs free energy of the rate-determining step (*N2 → *NNH).