Thermodynamic properties and enhancement of diamagnetism in nitrogen doped lutetium hydride synthesized at high pressure.

Nitrogen doped lutetium hydride has drawn global attention in the pursuit of room-temperature superconductivity near ambient pressure and temperature. However, variable synthesis techniques and uncertainty surrounding nitrogen concentration have contributed to extensive debate within the scientific community about this material and its properties. We used a solid-state approach to synthesize nitrogen doped lutetium hydride at high pressure and temperature (HPT) and analyzed the residual starting materials to determine its nitrogen content. High temperature oxide melt solution calorimetry determined the formation enthalpy of LuH1.96N0.02 (LHN) from LuH2 and LuN to be -28.4 ± 11.4 kJ/mol. Magnetic measurements indicated diamagnetism which increased with nitrogen content. Ambient pressure conductivity measurements observed metallic behavior from 5 to 350 K, and the constant and parabolic magnetoresistance changed with increasing temperature. High pressure conductivity measurements revealed that LHN does not exhibit superconductivity up to 26.6 GPa. We compressed LHN in a diamond anvil cell to 13.7 GPa and measured the Raman signal at each step, with no evidence of any phase transition. Despite the absence of superconductivity, a color change from blue to purple to red was observed with increasing pressure. Thus, our findings confirm the thermodynamic stability of LHN, do not support superconductivity, and provide insights into the origins of its diamagnetism.

Thermochemical Properties of High Pressure Neodymium Monoxide.

Neodymium monoxide (NdO) is a metastable rare earth oxide material with a unique electronic structure, which has potential applications across various fields such as semiconductors, energy, catalysis, laser technology, and advanced communications. Despite its promising attributes, the thermodynamic properties of NdO remain unexplored. In this study, high pressure, high temperature phases of neodymium monoxide (NdO, with a rocksalt structure) and body-centered cubic (bcc) Nd metal were synthesized at 5 GPa and 1473 K. X-ray photoelectron spectroscopy (XPS) measurements indicate that the Nd 3d peak shifts to higher energy in NdO relative to Nd2O3, suggesting the possibility of complex electronic states in NdO. Formation enthalpies for the reaction 1/3Nd2O3 + 1/3bcc Nd = NdO obtained from high temperature solution calorimetry in molten sodium molybdate and for the reaction dhcp Nd (metal) = bcc Nd (metal) from differential scanning calorimetry are 25.98 ± 8.65 and 5.2 kJ/mol, respectively. Utilizing these enthalpy values, we calculated the pressure-temperature boundary for the reaction 1/3 bcc Nd + 1/3Nd2O3 = NdO, which has a negative P-T slope of -1.68× 10-4 GPa/K. These insights reveal the high pressure behavior of NdO and neodymium metal, underscoring their potential utility in technological applications.

Greigite (Fe3S4) is thermodynamically stable: Implications for its terrestrial and planetary occurrence.

Iron sulfide minerals are widespread on Earth and likely in planetary bodies in and beyond our solar system. Using measured enthalpies of formation for three magnetic iron sulfide phases: bulk and nanophase Fe3S4 spinel (greigite), and its high-pressure monoclinic phase, we show that greigite is a stable phase in the Fe-S phase diagram at ambient temperature. The thermodynamic stability and low surface energy of greigite supports the common occurrence of fine-grained Fe3S4 in many anoxic terrestrial settings. The high-pressure monoclinic phase, thermodynamically metastable below about 3 GPa, shows a calculated negative P-T slope for its formation from the spinel. The stability of these three phases suggests their potential existence on Mercury and their magnetism may contribute to its present magnetic field.

Large H2O solubility in dense silica and its implications for the interiors of water-rich planets.

Sub-Neptunes are common among the discovered exoplanets. However, lack of knowledge on the state of matter in [Formula: see text]O-rich setting at high pressures and temperatures ([Formula: see text]) places important limitations on our understanding of this planet type. We have conducted experiments for reactions between [Formula: see text] and [Formula: see text]O as archetypal materials for rock and ice, respectively, at high [Formula: see text] We found anomalously expanded volumes of dense silica (up to 4%) recovered from hydrothermal synthesis above ∼24 GPa where the [Formula: see text]-type (Ct) structure appears at lower pressures than in the anhydrous system. Infrared spectroscopy identified strong OH modes from the dense silica samples. Both previous experiments and our density functional theory calculations support up to 0.48 hydrogen atoms per formula unit of ([Formula: see text])[Formula: see text] At pressures above 60 GPa, [Formula: see text]O further changes the structural behavior of silica, stabilizing a niccolite-type structure, which is unquenchable. From unit-cell volume and phase equilibrium considerations, we infer that the niccolite-type phase may contain H with an amount at least comparable with or higher than that of the Ct phase. Our results suggest that the phases containing both hydrogen and lithophile elements could be the dominant materials in the interiors of water-rich planets. Even for fully layered cases, the large mutual solubility could make the boundary between rock and ice layers fuzzy. Therefore, the physical properties of the new phases that we report here would be important for understanding dynamics, geochemical cycle, and dynamo generation in water-rich planets.

Experimental constraints on the electrical anisotropy of the lithosphere-asthenosphere system.

The relative motion of lithospheric plates and underlying mantle produces localized deformation near the lithosphere-asthenosphere boundary. The transition from rheologically stronger lithosphere to weaker asthenosphere may result from a small amount of melt or water in the asthenosphere, reducing viscosity. Either possibility may explain the seismic and electrical anomalies that extend to a depth of about 200 kilometres. However, the effect of melt on the physical properties of deformed materials at upper-mantle conditions remains poorly constrained. Here we present electrical anisotropy measurements at high temperatures and quasi-hydrostatic pressures of about three gigapascals on previously deformed olivine aggregates and sheared partially molten rocks. For all samples, electrical conductivity is highest when parallel to the direction of prior deformation. The conductivity of highly sheared olivine samples is ten times greater in the shear direction than for undeformed samples. At temperatures above 900 degrees Celsius, a deformed solid matrix with nearly isotropic melt distribution has an electrical anisotropy factor less than five. To obtain higher electrical anisotropy (up to a factor of 100), we propose an experimentally based model in which layers of sheared olivine are alternated with layers of sheared olivine plus MORB or of pure melt. Conductivities are up to 100 times greater in the shear direction than when perpendicular to the shear direction and reproduce stress-driven alignment of the melt. Our experimental results and the model reproduce mantle conductivity-depth profiles for melt-bearing geological contexts. The field data are best fitted by an electrically anisotropic asthenosphere overlain by an isotropic, high-conductivity lowermost lithosphere. The high conductivity could arise from partial melting associated with localized deformation resulting from differential plate velocities relative to the mantle, with subsequent upward melt percolation from the asthenosphere.

The O-O Bonding and Hydrogen Storage in the Pyrite-type PtO2.

We have synthesized pyrite-type PtO2 (py-PtO2) at 50-60 GPa and successfully recovered it at 1 bar. The observed O-O stretching vibration in Raman spectra provides direct evidence for inter-oxygen bonding in the structure. We also identified the O-H vibrations in py-PtO2 synthesized from the low-temperature areas, indicating hydrogenation, py-PtO2H x ( x ≤ 1). Diffraction patterns are consistent with a range of degrees of hydrogenation controlled by temperature. We found that py-PtO2 has a high bulk modulus, 314 ± 4 GPa. The chemical behaviors found in py-PtO2 have implications for the hydrogen storage in materials with anion-anion bonding, and the geochemistry of oxygen, hydrogen, and transition metals in the deep planetary interiors.

Ultrahydrous stishovite from high-pressure hydrothermal treatment of SiO2.

Stishovite (SiO(2) with the rutile structure and octahedrally coordinated silicon) is an important high-pressure mineral. It has previously been considered to be essentially anhydrous. In this study, hydrothermal treatment of silica glass and coesite at 350-550 °C near 10 GPa produces stishovite with significant amounts of H(2)O in its structure. A combination of methodologies (X-ray diffraction, thermal analysis, oxide melt solution calorimetry, secondary ion mass spectrometry, infrared and nuclear magnetic resonance spectroscopy) indicate the presence of 1.3 ± 0.2 wt % H(2)O and NMR suggests that the primary mechanism for the H(2)O uptake is a direct hydrogarnet-like substitution of 4H(+) for Si(4+), with the protons clustered as hydroxyls around a silicon vacancy. This substitution is accompanied by a substantial volume decrease for the system (SiO(2) + H(2)O), although the stishovite expands slightly, and it is only slightly unfavorable in energy. Stishovite could thus be a host for H(2)O at convergent plate boundaries, and in other relatively cool high-pressure environments.

Ge0.57Ti0.43O2: a new high-pressure material with rutile-type crystal structure.

Single crystals of a GeO2-TiO2 solid solution with the corresponding composition Ge0.57Ti0.43O2 (germanium titanium tetra-oxide) were obtained by devitrification of germania-titania glass at high pressure and temperature. The new compound crystallizes in the rutile structure type (space group P42/mnm), where Ge and Ti share the same position M (site symmetry m.mm), with occupancy values of 0.57 (3) and 0.43 (3), respectively, and one O-atom position (m.2m). The M site is in a sixfold O-atom coordination and, as in the original TiO2 rutile structure, an elongation of the O-M-O bonds along the c-axis direction of the coordination polyhedron and deviation of the angles from 90° lead to a decrease in the coordination symmetry from octa-hedral to tetra-gonal. The Ge and Ti atoms are fully disordered in the structure, which indicates that the rutile structure is surprisingly pliant given the differing sizes of the two cations.

Elastic, magnetic and electronic properties of iridium phosphide Ir2P.

Cubic (space group: Fmm) iridium phosphide, Ir2P, has been synthesized at high pressure and high temperature. Angle-dispersive synchrotron X-ray diffraction measurements on Ir2P powder using a diamond-anvil cell at room temperature and high pressures (up to 40.6 GPa) yielded a bulk modulus of B0 = 306(6) GPa and its pressure derivative B0' = 6.4(5). Such a high bulk modulus attributed to the short and strongly covalent Ir-P bonds as revealed by first - principles calculations and three-dimensionally distributed [IrP4] tetrahedron network. Indentation testing on a well-sintered polycrystalline sample yielded the hardness of 11.8(4) GPa. Relatively low shear modulus of ~64 GPa from theoretical calculations suggests a complicated overall bonding in Ir2P with metallic, ionic, and covalent characteristics. In addition, a spin glass behavior is indicated by magnetic susceptibility measurements.

Ab initio phasing of X-ray powder diffraction patterns by charge flipping.

Determining crystal structures from powder X-ray diffraction data remains a challenging problem in materials science. By embedding a Le-Bail-like procedure within the recently discovered charge-flipping phasing algorithm, an extremely simple, fast and effective ab initio method has been developed to determine phases directly from indexed powder diffraction patterns. The algorithm solves the degeneracy problem by applying spherical averaging for overlapping Bragg reflections, while solving the phase problem by using the Oszlányi-Süto charge-flipping algorithm. The processes of peak decomposition and phasing are integrated within the same iteration, and a dynamic support is used. The Fienup hybrid input-output algorithm is also incorporated to minimize stagnation. The ability of the algorithm to find structure-factor phases rapidly is found to assist with the fundamental problem of degeneracy (overlapping reflections) which is intrinsic to powder diffraction data. Space-group and chemical-composition information are not needed as inputs, and can be determined from the result. The method is illustrated using several experimental powder patterns of indifferent quality.