Silver-Catalyzed (Z)-ß-Fluoro-vinyl Iodonium Salts from Alkynes: Efficient and Selective Syntheses of Z-Monofluoroalkenes.

Monofluoroalkenes are stable and lipophilic amide bioisosteres used in medicinal chemistry. However, efficient and stereoselective methods for synthesizing Z-monofluoroalkenes are underdeveloped. We envisage (Z)-ß-fluoro-vinyl iodonium salts (Z-FVIs) as coupling partners for the diverse and stereoselective synthesis of Z-monofluoroalkenes. Disclosed herein is the development and application of a silver(I)-catalyzed process for accessing a broad scope of (Z)-FVIs with exclusive Z-stereoselectivity and regioselectivity from alkynes in a single step. Experimental and computational studies provide insight into the mechanism of the catalytic cycle and the role of the silver(I) catalyst, and the reactivity of (Z)-FVIs is explored through several stereospecific derivatizations.

A Stoichiometric Haloform Coupling for Ester Synthesis with Secondary Alcohols.

The haloform reaction from methyl ketones to carboxylic acids is one of the oldest known synthetic organic reactions, which has been used in myriad applications over the decades. The corresponding reaction to produce esters is, however, less developed, as the reaction is generally limited to simple, primary alcohols that are used in solvent-level quantities, thereby restricting the complexity of esters that can be directly formed. Herein, we detail the development of a general ester-forming haloform coupling reaction using one equivalent of alcohol. Mechanistic and kinetic modelling studies demonstrated that the key intermediates are formed under equilibrium, which facilitated the development of conditions that are amenable to secondary alcohols.

Alkene 1,3-Difluorination via Transient Oxonium Intermediates.

The 1,3-difunctionalization of unactivated alkenes is an under-explored transformation that leads to moieties that are otherwise challenging to prepare. Herein, we report a hypervalent iodine-mediated 1,3-difluorination of homoallylic (aryl) ethers to give unreported 1,3-difluoro-4-oxy groups with moderate to excellent diastereoselectivity. The transformation proceeds through a different mode of reactivity for 1,3-difunctionalization, in which a regioselective addition of fluoride opens a transiently formed oxonium intermediate to rearrange an alkyl chain. The optimized protocol is scalable and shown to proceed well with a variety of functional groups and substitution on the alkenyl chain, hence providing ready access to this fluorinated, conformationally controlled moiety.

Benzylic C(sp3)-H fluorination.

The selective fluorination of C(sp3)-H bonds is an attractive target, particularly for pharmaceutical and agrochemical applications. Consequently, over recent years much attention has been focused on C(sp3)-H fluorination, and several methods that are selective for benzylic C-H bonds have been reported. These protocols operate via several distinct mechanistic pathways and involve a variety of fluorine sources with distinct reactivity profiles. This review aims to give context to these transformations and strategies, highlighting the different tactics to achieve fluorination of benzylic C-H bonds.

Intramolecular Alkene Fluoroarylation of Phenolic Ethers Enabled by Electrochemically Generated Iodane.

The 3-substituted chromane core is found in several bioactive natural products. Herein, we describe a route to 3-fluorinated chromanes from allylic phenol ethers. Our external oxidant-free approach takes advantage of an electrochemical generation of a hypervalent iodine species, difluoro-λ3-tolyl iodane, which mediates the alkene fluoroarylation. High yields and selectivity for this transformation are achieved for electron poor substrates. The redox chemistry has been characterized for the electrochemical generation of the iodane in the presence of fluoride, and insights into the mechanism are given. The transformation has been demonstrated on gram scales, which indicates the potential broader utility of the process.

Electrode Materials in Modern Organic Electrochemistry.

The choice of electrode material is critical for achieving optimal yields and selectivity in synthetic organic electrochemistry. The material imparts significant influence on the kinetics and thermodynamics of electron transfer, and frequently defines the success or failure of a transformation. Electrode processes are complex and so the choice of a material is often empirical and the underlying mechanisms and rationale for success are unknown. In this review, we aim to highlight recent instances of electrode choice where rationale is offered, which should aid future reaction development.

Electrochemical Vicinal Difluorination of Alkenes: Scalable and Amenable to Electron-Rich Substrates.

Fluorinated alkyl groups are important motifs in bioactive compounds, positively influencing pharmacokinetics, potency and conformation. The oxidative difluorination of alkenes represents an important strategy for their preparation, yet current methods are limited in their alkene-types and tolerance of electron-rich, readily oxidized functionalities, as well as in their safety and scalability. Herein, we report a method for the difluorination of a number of unactivated alkene-types that is tolerant of electron-rich functionality, giving products that are otherwise unattainable. Key to success is the electrochemical generation of a hypervalent iodine mediator using an "ex-cell" approach, which avoids oxidative substrate decomposition. The more sustainable conditions give good to excellent yields in up to decagram scales.

Electrochemical Aminoxyl-Mediated α-Cyanation of Secondary Piperidines for Pharmaceutical Building Block Diversification.

Secondary piperidines are ideal pharmaceutical building blocks owing to the prevalence of piperidines in commercial drugs. Here, we report an electrochemical method for cyanation of the heterocycle adjacent to nitrogen without requiring protection or substitution of the N-H bond. The reaction utilizes ABNO (9-azabicyclononane N-oxyl) as a catalytic mediator. Electrochemical oxidation of ABNO generates the corresponding oxoammonium species, which promotes dehydrogenation of the 2° piperidine to the cyclic imine, followed by addition of cyanide. The low-potential, mediated electrolysis process is compatible with a wide range of heterocyclic and oxidatively sensitive substituents on the piperidine ring and enables synthesis of unnatural amino acids.

Meisenheimer Complexes in SN Ar Reactions: Intermediates or Transition States?

Meisenheimer's missing! Anionic σ-complexes, best known as Meisenheimer complexes, have long been assumed to be intermediates in SN Ar reactions. New evidence now suggests that these intermediates may only be formed in select cases and that a concerted pathway is more common. These claims are supported by 12 C/13 C kinetic isotopes effects, determined using a new method based on 19 F NMR, and DFT calculations.

Structure-Activated Copper Photosensitisers for Photocatalytic Water Reduction.

A series of phenanthroline-based ligands have been synthesised and their influence as bidentate nitrogen ligands in heteroleptic [Cu(P^P)(N^N)]+ photosensitisers in light-driven water reduction has been studied. In this noble-metal-free Cu-Fe-based photocatalytic water reduction system, the structural effects of the nitrogen ligands have been explored, including the steric and electronic effects of substituents at the 2,9- and 4,7-positions of phenanthroline. Ligands were prepared that led to increased hydrogen generation, with turnover numbers (TONCu ) of up to 1388 being observed. All the new complexes were electrochemically and photophysically characterised. We demonstrate for the first time that the presence of fluorine in nitrogen ligands increases the efficacy of copper complexes in photocatalytic hydrogen production.

Unravelling the Mechanism of Basic Aqueous Methanol Dehydrogenation Catalyzed by Ru-PNP Pincer Complexes.

Ruthenium PNP complex 1a (RuH(CO)Cl(HN(C2H4Pi-Pr2)2)) represents a state-of-the-art catalyst for low-temperature (<100 °C) aqueous methanol dehydrogenation to H2 and CO2. Herein, we describe an investigation that combines experiment, spectroscopy, and theory to provide a mechanistic rationale for this process. During catalysis, the presence of two anionic resting states was revealed, Ru-dihydride (3-) and Ru-monohydride (4-) that are deprotonated at nitrogen in the pincer ligand backbone. DFT calculations showed that O- and CH- coordination modes of methoxide to ruthenium compete, and form complexes 4- and 3-, respectively. Not only does the reaction rate increase with increasing KOH, but the ratio of 3-/4- increases, demonstrating that the "inner-sphere" C-H cleavage, via C-H coordination of methoxide to Ru, is promoted by base. Protonation of 3- liberates H2 gas and formaldehyde, the latter of which is rapidly consumed by KOH to give the corresponding gem-diolate and provides the overall driving force for the reaction. Full MeOH reforming is achieved through the corresponding steps that start from the gem-diolate and formate. Theoretical studies into the mechanism of the catalyst Me-1a (N-methylated 1a) revealed that C-H coordination to Ru sets-up C-H cleavage and hydride delivery; a process that is also promoted by base, as observed experimentally. However, in this case, Ru-dihydride Me-3 is much more stable to protonation and can even be observed under neutral conditions. The greater stability of Me-3 rationalizes the lower rates of Me-1a compared to 1a, and also explains why the reaction rate then drops with increasing KOH concentration.

Copper-Based Photosensitisers in Water Reduction: A More Efficient In Situ Formed System and Improved Mechanistic Understanding.

The reduction of water has been achieved through a non-noble-metal-based homogeneous catalyst system that is formed in situ. Optimisation of the ligand quantities increased catalyst turnover numbers compared to preformed complexes. Mechanistic studies confirm a heteroleptic Cu complex as the active photosensitiser (PS) and an in situ formed Fe-phosphido dimer complex as the water reduction catalyst. The in situ method has been used to screen a range of ligands for the active PS, which has led to the identification a number of structural features important to longevity and performance.

Selection of boron reagents for Suzuki-Miyaura coupling.

Suzuki-Miyaura (SM) cross-coupling is arguably the most widely-applied transition metal catalysed carbon-carbon bond forming reaction to date. Its success originates from a combination of exceptionally mild and functional group tolerant reaction conditions, with a relatively stable, readily prepared and generally environmentally benign organoboron reagent. A variety of such reagents have been developed for the process, with properties that have been tailored for application under specific SM coupling conditions. This review analyses the seven main classes of boron reagent that have been developed. The general physical and chemical properties of each class of reagent are evaluated with special emphasis on the currently understood mechanisms of transmetalation. The methods to prepare each reagent are outlined, followed by example applications in SM coupling.

Pulsed electrolysis: enhancing primary benzylic C(sp3)-H nucleophilic fluorination.

Electrosynthesis is an efficient and powerful tool for the generation of elusive reactive intermediates. The application of alternative electrolysis waveforms provides a new level of control for dynamic redox environments. Herein, we demonstrate that pulsed electrolysis provides a favourable environment for the generation and fluorination of highly unstable primary benzylic cations from C(sp3)-H bonds. By introduction of a toff period, we propose this waveform modulates the electrical double layer to improve mass transport and limit over-oxidation.

Bromide-Mediated Silane Oxidation: A Practical Counter-Electrode Process for Nonaqueous Deep Reductive Electrosynthesis.

The counter-electrode process of an organic electrochemical reaction is integral for the success and sustainability of the process. Unlike for oxidation reactions, counter-electrode processes for reduction reactions remain limited, especially for deep reductions that apply very negative potentials. Herein, we report the development of a bromide-mediated silane oxidation counter-electrode process for nonaqueous electrochemical reduction reactions in undivided cells. The system is found to be suitable for replacing either sacrificial anodes or a divided cell in several reported reactions. The conditions are metal-free, use inexpensive reagents and a graphite anode, are scalable, and the byproducts are reductively stable and readily removed. We showcase the translation of a previously reported divided cell reaction to a >100 g scale in continuous flow.

Diastereodivergent nucleophile-nucleophile alkene chlorofluorination.

The selective hetero-dihalogenation of alkenes provides useful building blocks for a broad range of chemical applications. Unlike homo-dihalogenation, selective hetero-dihalogenation reactions, especially fluorohalogenation, are underdeveloped. Current approaches combine an electrophilic halogen source with a nucleophilic halogen source, which necessarily leads to anti-addition, and regioselectivity has only been achieved using highly activated alkenes. Here we describe an alternative, nucleophile-nucleophile approach that adds chloride and fluoride ions over unactivated alkenes in a highly regio-, chemo- and diastereoselective manner. A curious switch in the reaction mechanism was discovered, which triggers a complete reversal of the diastereoselectivity to promote either anti- or syn-addition. The conditions are demonstrated on an array of pharmaceutically relevant compounds, and detailed mechanistic studies reveal the selectivity and the switch between the syn- and anti-diastereomers are based on different active iodanes and which of the two halides adds first.

Electrochemical Benzylic C(sp3)-H Direct Amidation.

Amide bonds are ubiquitous and found in a myriad of functional molecules. Although formed in a reliable and robust fashion, alternative amide bond disconnections provide flexibility and synthetic control. Herein we describe an electrochemical method to form the non-amide C-N bond from direct benzylic C(sp3)-H amidation. Our approach is applied toward the synthesis of secondary amides by coupling secondary benzylic substrates with substituted primary benzamides. The reaction has been scaled up to a multigram scale in flow.

Transmetalation in the Suzuki-Miyaura coupling: the fork in the trail.

The Suzuki-Miyaura coupling is one of the few transition-metal-catalyzed C-C bond-forming reactions that have been used in applications ranging from discovery chemistry to manufacturing processes. Although coupling proceeds through the generic three-stage 'oxidative addition, transmetalation, reductive elimination' sequence, there are a number of features that differentiate the Suzuki-Miyaura process from other transition-metal-catalyzed cross-couplings. Most of these features are centered around, or are a consequence of, activation of the boron reagent for transmetalation through one or both of two distinct pathways. This review focuses on the evidence that has been presented for this 'fork in the trail', and the potential to apply such mechanistic insight to the design of reaction conditions.

Electrochemical synthesis of biaryls by reductive extrusion from N,N'-diarylureas.

The synthesis of biaryl compounds by the transition-metal free coupling of arenes is an important contemporary challenge, aiming to avoid the toxicity and cost profiles associated with the metal catalysts commonly used in the synthesis of these pharmaceutically relevant motifs. In this paper, we describe an electrochemical approach to the synthesis of biaryls in which aniline derivatives are coupled through the formation and reduction of a temporary urea linkage. The conformational alignment of the arenes in the N,N'-diaryl urea intermediates promotes C-C bond formation following single-electron reduction. Our optimized conditions are suitable for the synthesis of a variety of biaryls, including sterically hindered examples carrying ortho-substituents, representing complementary reactivity to most metal catalysed methods.