Virtual surgical planning and use of a 3D-printed, patient-specific reduction system for minimally invasive plate osteosynthesis of diaphyseal tibial fractures in dogs: A historic case control study.

OBJECTIVE: To compare the efficacy and clinical outcomes of computed tomography (CT)-based virtual surgical planning (VSP) and a three-dimensional (3D)-printed, patient-specific reduction system to conventional indirect reduction techniques for diaphyseal tibial fractures stabilized using minimally invasive plate osteosynthesis (MIPO) in dogs. STUDY DESIGN: A prospective clinical study with a historic control cohort. SAMPLE POPULATION: Dogs undergoing MIPO stabilization of diaphyseal tibial fractures using a custom 3D-printed reduction system (3D-MIPO; n = 15) or conventional indirect reduction techniques (c-MIPO; n = 14). METHODS: Dogs were prospectively enrolled to the 3D-MIPO group and CT scans were used to design and fabricate a custom 3D-printed reduction system to facilitate MIPO. Medical records were searched to identify dogs for the c-MIPO group. Pre-, intra- and postoperative parameters were compared between groups. RESULTS: The duration from presentation until surgery was 23 h longer in the 3D-MIPO group (p = .002). Fewer intraoperative fluoroscopic images were acquired (p < .001) and mean surgical duration was 34 min shorter in the 3D-MIPO group (p = .014). Median postoperative tibial length, frontal alignment, and sagittal alignment were within 4 mm, 3° and 3°, respectively, of the contralateral tibia in both groups and did not differ between reduction groups (p > .1). Postoperative complications occurred in 27% and 14% of fractures in the 3D-MIPO and c-MIPO groups, respectively. CONCLUSION: Both reduction methods yielded comparable results. Although the preoperative planning and guide preparation was time consuming, surgery times were shorter and fluoroscopy use was less in the 3D-MIPO group. CLINICAL SIGNIFICANCE: VSP and the custom 3D-printed reduction system facilitated efficient MIPO.

Efficacy of virtual surgical planning and a three-dimensional-printed, patient-specific reduction system to facilitate alignment of diaphyseal tibial fractures stabilized by minimally invasive plate osteosynthesis in dogs: A prospective clinical study.

OBJECTIVE: To evaluate the efficacy of a three-dimensional (3D)-printed, patient-specific reduction system for aligning diaphyseal tibial fractures stabilized using minimally invasive plate osteosynthesis (MIPO). STUDY DESIGN: Prospective clinical trial. SAMPLE POPULATION: Fifteen client owned dogs. METHODS: Virtual 3D models of both pelvic limbs were created. Pin guides were designed to conform to the proximal and distal tibia. A reduction bridge was designed to align the pin guides based on the guides' spatial location. Guides were 3D printed, sterilized, and applied, in conjunction with transient application of a circular fixator, to facilitate indirect fracture realignment before plate application. Alignment of the stabilized tibiae was assessed using postoperative computed tomography scans. RESULTS: Mean duration required for virtual planning was 2.5 h and a mean of 50.7 h elapsed between presentation and surgery. Guide placement was accurate with minor median discrepancies in translation and frontal, sagittal, and axial plane positioning of 2.9 mm, 3.6°, 2.7°, and 6.8°, respectively. Application of the reduction system restored mean tibial length and frontal, sagittal, and axial alignment within 1.7 mm, 1.9°, 1.7°, and 4.5°, respectively, of the contralateral tibia. CONCLUSION: Design and fabrication of a 3D-printed, patient-specific fracture reduction system is feasible in a relevant clinical timeline. Intraoperative pin-guide placement was reasonably accurate with minor discrepancies compared to the virtual plan. Custom 3D-printed reduction system application facilitated near-anatomic or acceptable fracture reduction in all dogs. CLINICAL SIGNIFICANCE: Virtual planning and fabrication of a 3D-printing patient-specific fracture reduction system is practical and facilitated acceptable, if not near-anatomic, fracture alignment during MIPO.

Minimally invasive plate osteosynthesis of femoral fractures with 3D-printed bone models and custom surgical guides: A cadaveric study in dogs.

OBJECTIVE: Assess the accuracy and efficiency of reduction provided by application of plates precontoured to 3-dimensional (3D)-printed femoral bone models using a custom fracture reduction system (FRS) or intramedullary pin (IMP) to facilitate femoral minimally invasive plate osteosynthesis (MIPO) in dogs. STUDY DESIGN: Experimental cadaveric study. SAMPLE POPULATION: Seven dog cadavers. METHODS: Virtual 3D femoral models were created using computed tomographic images. Simulated, virtual mid-diaphyseal femoral fractures were created and reduced. Reduced femoral models were 3D-printed and a plate was contoured. Custom drill guides for plate screw placement were designed and 3D-printed for the FRS. Mid-diaphyseal simulated comminuted fractures were created in cadavers, and fractures were aligned using FRS or IMP and stabilized with the precontoured plates. Number of fluoroscopic images acquired per procedure and surgical duration were recorded. Computed tomographic scans were repeated to assess femoral length and alignment. RESULTS: Compared to the preoperative virtual plan, median change in femoral length and frontal, sagittal, and axial alignment was less than 3 mm, 2°, 3°, and 3° postoperatively, respectively, in both reduction groups. There was no difference in length or alignment between reduction groups (P > .05). During FRS, fewer fluoroscopic images were taken (P = .001), however, surgical duration was longer than IMP procedures (P = .011). CONCLUSION: Femoral alignment was accurate when using plates precontoured to 3D printed models, regardless of reduction method. CLINICAL SIGNIFICANCE: Accurate plate contouring using anatomically accurate models may improve fracture reduction accuracy during MIPO applications. Custom surgical guides may reduce fluoroscopy use associated with MIPO.

A review of minimally invasive fracture stabilization in dogs and cats.

OBJECTIVE: To summarize and discuss peer-reviewed studies on minimally invasive osteosynthesis (MIO) of long bone, physeal, and articular fractures in dogs and cats. STUDY DESIGN: Invited review. METHODS: A critique of literature was performed to assess MIO feasibility, outcomes, and complications through PubMed, Scopus, and CAB abstracts research databases (2000-2020). RESULTS: More than 40 MIO articles have been published in the last 15 years, but most studies had small numbers, lacked control groups, and used limited outcome measures. Studies generally showed that MIO was feasible in dogs and cats with low complication rates. The current evidence does not demonstrate superior bone healing or functional outcomes with MIO when compared to standard methods. Although treatment principles, case selection, and techniques varied depending on the anatomical location, there were no salient differences in complication rates among long bones, physeal, and articular fractures treated by MIO. CONCLUSION: The current available evidence and the personal experience of the authors support MIO as a promising fracture management modality. MIO can yield excellent outcomes when applied in carefully selected cases, performed by surgeons experienced in the technique. We cannot, however, conclude that MIO is superior to open fracture stabilization based on the available evidence in veterinary literature. Randomized controlled studies are warranted to prospectively compare MIO with other osteosynthesis techniques and thereby validate its role in fracture management for dogs and cats.

Subsequent meniscal tears following tibial tuberosity advancement and tibial plateau leveling osteotomy in dogs with cranial cruciate ligament deficiency: An in vivo experimental study.

OBJECTIVE: To evaluate the short- and mid-term effects of tibial tuberosity advancement (TTA) and tibial plateau leveling osteotomy (TPLO) on subsequent meniscal tears. STUDY DESIGN: Experimental in vivo study. ANIMALS: Purpose-bred beagle dogs (n = 15). METHODS: For each dog, the cranial cruciate ligaments were transected; one limb underwent TTA and the other limb underwent TPLO. Orthopedic and radiographic examinations were performed preoperatively and at 12 and 32 weeks postoperatively. Gross evaluation of the stifle joint was performed after euthanasia at 12 (n = 10) and 32 (n = 5) weeks. RESULTS: Lameness scores were not different between TTA and TPLO limbs at any time point. Radiographic osteoarthritis scores of TTA stifles (1.33 ± 0.49) were higher than TPLO stifles (0.67 ± 0.49) (p = .002) at 12 weeks postoperatively, but there was no difference between groups at 32 weeks postoperatively. Subsequent medial meniscal tears occurred in 6/10 TTA stifles, and 0/10 TPLO stifles at 12 weeks postoperatively and in 5/5 TTA stifles, and 1/5 TPLO stifles at 32 weeks postoperatively. Subsequent lateral meniscal tears occurred in 4/5 TTA stifles at 32 weeks postoperatively. Medial meniscal total gross pathology score was higher in TTA than TPLO stifles. TTA stifles had more articular cartilage damage when compared with TPLO stifles at 32 weeks postoperatively. CONCLUSION: In this within-dog experimental comparison, subsequent medial meniscal tears and cartilage injury was more prevalent following TTA when compared to TPLO. CLINICAL SIGNIFICANCE: In an experimental model, TPLO protects the medial meniscus and articular cartilage better than TTA in stifles with complete cranial cruciate ligament deficiency.

Calcium sulfate antibiotic-impregnated bead implantation for deep surgical site infection associated with orthopedic surgery in small animals.

OBJECTIVE: To report the outcomes and complications associated with antibiotic-impregnated calcium sulfate beads for prevention and treatment of orthopedic-related surgical site infection (SSI) in companion animals. STUDY DESIGN: Retrospective case series. ANIMALS: Client-owned cats (n = 2) and dogs (n = 14). METHODS: Medical records of 16 cases in which implantation of antibiotic-impregnated calcium sulfate beads was performed for the prevention or treatment of SSI were reviewed. Information collected included signalment, prior surgery, reason for bead placement, antibiotics used, bacterial culture results, and clinical outcomes. RESULTS: Surgical site infection resolved in six of 10 animals treated therapeutically and did not occur in six of six animals treated prophylactically. Susceptibility of the causative bacteria to the antibiotic implanted was confirmed in five of six cases with resolved SSI treated therapeutically but in only one of four cases with unresolved SSI treated therapeutically. Complications directly related to bead placement were evident in only one case in which beads extruded from external skeletal fixator pin tracts 7 days after implantation. At final follow-up, 11 of 12 animals without SSI had satisfactory limb use and no clinical, cytologic, or radiographic evidence of infection. CONCLUSION: Implantation was well tolerated. Resolution of SSI was inconsistent; however, when bacteria were susceptible to the antibiotic implanted, SSI resolved in all but one case. CLINICAL SIGNIFICANCE: Antibiotic-impregnated calcium sulfate beads could be considered for prevention or treatment of orthopedic SSI in small animals. A prospective clinical study is required to obtain additional information, including the value of preoperative bacterial culture.

Femorotibial kinematics in dogs treated with tibial plateau leveling osteotomy for cranial cruciate ligament insufficiency: An in vivo fluoroscopic analysis during walking.

OBJECTIVE: To determine the ability of tibial plateau leveling osteotomy (TPLO) to address abnormal femorotibial kinematics caused by cranial cruciate ligament (CCL) rupture during walking in dogs. STUDY DESIGN: Prospective, clinical. ANIMALS: Sixteen dogs (20-40 kg) with unilateral complete CCL rupture. METHODS: Lateral view fluoroscopy was performed during treadmill walking preoperatively and 6 months after TPLO. Digital three-dimensional (3D) models of the femora and tibiae were created from computed tomographic (CT) images. Gait cycles were analyzed by using a 3D-to-2D image registration process. Craniocaudal translation, internal/external rotation, and flexion/extension of the femorotibial joint were compared between preoperative and 6-month postoperative time points for the affected stifle and 6-month postoperative unaffected contralateral (control) stifles. RESULTS: In the overall population, CCL rupture resulted in 10 ± 2.2 mm (mean ± SD) cranial tibial translation at midstance phase, which was converted to 2.1 ± 4.3 mm caudal tibial translation after TPLO. However, five of 16 TPLO-treated stifles had 4.1 ± 0.3 mm of cranial tibial subluxation during mid-to-late stance phase, whereas 10 of 16 TPLO-treated stifles had 4.3 ± 0.4 mm of caudal tibial subluxation throughout the gait cycle. Overall, postoperative axial rotational and flexion/extension patterns were not different from control, but stifles with caudal tibial subluxation had more external tibial rotation during mid-to-late stance phase compared with stifles with cranial tibial subluxation. CONCLUSION: TPLO mitigated abnormal femorotibial kinematics but did not restore kinematics to control values in 15 of 16 dogs during walking. CLINICAL SIGNIFICANCE: Tibial plateau leveling osteotomy reduces cranial tibial subluxation during walking, but persistent instability is common.

Comparison of three imaging modalities used to evaluate bone healing after tibial tuberosity advancement in cranial cruciate ligament-deficient dogs and comparison of the effect of a gelatinous matrix and a demineralized bone matrix mix on bone healing - a pilot study.

BACKGROUND: Bone healing and assessment of the state of bone bridging is an important part of clinical orthopedics, whether for fracture healing or for follow up of osteotomy procedures. Tibial tuberosity advancement (TTA) is designed to restore stability in cruciate deficient stifle joints by advancing the tuberosity while creating an osteotomy gap. The current study aims to: 1) compare three different imaging modalities to assess bone healing: ultrasound, radiographs and computed tomography (CT) and, to 2) compare the effect of a gelatinous matrix (GM) versus a demineralized bone matrix mix (DBM mix) on bone healing and bridging of this osteotomy gap in 10 otherwise healthy client-owned dogs with cranial cruciate ligament insufficiency. Osseous union of the osteotomy gap was evaluated with ultrasound, radiographs and CT at one, two, and 3 months postoperatively. Dogs were randomly selected to receive GM or DBM mix to fill the osteotomy gap created during the TTA procedure. Bone healing was assessed subjectively on all modalities as well as scored on radiographs and measured using Hounsfield units (HUs) on CT. Time to heal based on ultrasound, radiographs and CT were statistically compared between groups with significance set at p < 0.05. RESULTS: All osteotomy gaps were bridged with bone within 3 months for all modalities. Bridging bone was diagnosed in 5.6 weeks, 10.4 weeks and 9.6 weeks based on ultrasound, radiographs, and CT, respectively, in dogs treated with DBM mix. In dogs treated with GM osseous union was diagnosed in a mean of 4.0 weeks, 9.6 weeks and 7.2 weeks based on ultrasound, radiographs and CT. Ultrasound diagnosed osseous union significantly faster than both CT and radiographs (p < 0.001). The dimensions of the newly formed bone differed between treatment groups with the central portion of the bone only providing a small bridge in GM cases. Although bridging of the osteotomy gap occurred earlier in the group that received GM, no significant statistical difference was found between the two groups. CONCLUSIONS: Radiographs overestimate the time needed for osseous union of the osteotomy gap. All osteotomy sites healed radiographically within 3 months.

Femorotibial kinematics in dogs with cranial cruciate ligament insufficiency: a three-dimensional in-vivo fluoroscopic analysis during walking.

BACKGROUND: Cranial cruciate ligament (CrCL) insufficiency is a degenerative condition that is a common cause of pelvic limb lameness and osteoarthritis in dogs. Surgical therapies developed to treat dogs with naturally occurring CrCL insufficiency aim to address the resultant instability, but the in-vivo alterations in stifle kinematics associated with CrCL insufficiency have not been accurately defined. The objective of this study was to quantify the 3-dimensional femorotibial joint kinematics of dogs with naturally occurring cranial cruciate ligament (CrCL) insufficiency during ambulation. Eighteen client-owned dogs (20-40 kg) with natural unilateral complete CrCL rupture were included. Computed tomographic scans were used to create digital 3-dimensional models of the femur and tibia bilaterally for each dog. Lateral fluoroscopic images were obtained during treadmill walking and 3 complete gait cycles were analyzed. Stifle flexion/extension angle, craniocaudal translation, and internal/external rotation were calculated throughout the gait cycle using a previously described 3D-to-2D image registration process. Results were compared between the pre-operative CrCL-deficient and 6-month post-operative contralateral stifles (control). RESULTS: CrCL-deficient stifles were maintained in greater flexion throughout the gait cycle. Cranial tibial subluxation was evident in CrCL-deficient stifles at all time points throughout the gait cycle [9.7 mm at mid-stance (P < 0.0001); 2.1 mm at mid-swing (P < 0.0017)], and the magnitude of cranial tibial subluxation was greater at mid-stance phase than at mid-swing phase (P < 0.0001). Greater internal tibial rotation was present in CrCL-deficient stifles during stance phase (P < 0.0022) but no difference in axial rotation was evident during swing phase. CONCLUSIONS: Naturally occurring CrCL rupture causes profound craniocaudal translational and axial rotational instability, which is most pronounced during the stance phase of gait. Surgical stabilization techniques should aim to resolve both craniocaudal subluxation and axial rotational instability.

SURGICAL MANAGEMENT OF APPENDICULAR LONG-BONE FRACTURES IN FREE-RANGING FLORIDA PANTHERS ( PUMA CONCOLOR CORYI): SIX CASES (2000-2014).

The clinical outcomes of six free-ranging Florida panthers ( Puma concolor coryi) that underwent surgical stabilization of appendicular long-bone fractures (three femoral fractures, one tibial and one tibial and fibular fracture and two radial and ulnar fractures) were evaluated. These panthers presented to the University of Florida from 2000-2014. Estimated age of the panthers ranged from 0.5 to 4.5 yr, and weights ranged from 22 to 65 kg. Causes of injuries were vehicular collision ( n = 4) and capture related ( n = 2). All panthers underwent open reduction and fracture stabilization. Fixation failure necessitated three subsequent surgeries in one panther. Five panthers survived the immediate postoperative period, and all of these panthers' fractures obtained radiographic union (range, 8-36 [mean, 22] wk). The five surviving panthers underwent convalescence for 7-14 mo at White Oak Conservation Center before being released back into the wild; however, one panther was killed when hit by a car 3 days after release. The remaining four panthers were tracked for up to 106 mo in the wild and successfully integrated back into the native population. Surgical stabilization of appendicular long-bone fractures in free-ranging Florida panthers can be successful, but must take into account the stress that a large, undomesticated felid will place on the stabilized limb during convalescence as well as the difficulties involved in rehabilitating a wild panther in captivity.

Comparison of two external fixator systems for fracture reduction during minimally invasive plate osteosynthesis in simulated antebrachial fractures.

OBJECTIVE: To compare the Minimally Invasive Reduction Instrumentation System (MIRIS) to a two-ring circular fixator construct (CFC) for indirect reduction during minimally invasive plate osteosynthesis. STUDY DESIGN: Cadaveric antebrachial fracture model. ANIMALS: Ten skeletally mature dog cadavers. METHODS: Simulated bilateral antebrachial fractures were reduced and stabilized with the MIRIS on one limb, and a CFC on the contralateral limb, prior to placing a 10 hole Locking Compression Plate. Time to satisfactory reduction and implant placement were compared. Difficulty of fracture reduction and plate application was subjectively scored (1 to 5) for each procedure. Prefracture and postoperative orthogonal antebrachial radiographs were compared to assess restoration of radial length and angulation in sagittal and frontal planes. A paired t test (P ≤ .05) was used to compare parameters between the two reduction techniques. RESULTS: Reduction was faster (P = .0191) and plate application was subjectively easier (P = .047) when using the MIRIS compared to the CFC. There were no differences in subjective difficulty of reduction or plate application time between techniques. Mean postoperative radial length was reduced by approximately 4-mm, and procurvatum were decreased by approximately 7° compared to prefracture measurements, regardless of reduction technique. CONCLUSION: The MIRIS allowed for faster fracture reduction, and simplified plate placement compared to a temporary application of a CFC in our simulated antebrachial fracture model.

Adjunct fixation with a Kirschner wire or a plate for lateral unicondylar humeral fracture stabilization.

OBJECTIVE: To compare the biomechanical properties of using an interfragmentary 1.6 mm Kirschner wire or a 2.7 mm reconstruction plate as adjunctive epicondylar stabilization in simulated comminuted lateral unicondylar humeral fractures stabilized with a transcondylar 4.5 mm cortical screw. STUDY DESIGN: Cadaveric biomechanical assessment. SAMPLE POPULATION: Paired humeri harvested from 9 young, skeletally mature dogs. METHODS: Simulated comminuted lateral unicondylar humeral fractures were stabilized with a transcondylar 4.5 mm cortical screw placed in lag fashion. Adjunct fixations consisting of a 1.6 mm Kirschner wire on one side, and a 2.7 mm reconstruction plate on the contralateral side, were tested within paired humeri. Repaired humeri were axially loaded to failure and construct stiffness, yield load, and load to failure were obtained from the load-deformation curves. RESULTS: Stiffness (mean ± SD: 577 ± 245 vs 310 ± 71 N/mm; P = .01), yield load (mean ± SD: 2389 ± 572 vs 1017 N ± 292; P = .0002), and load at failure (mean ± SD: 3351 ± 358 vs 1693 ± 363 N; P = .009) were greater in constructs incorporating a reconstruction plate rather than a Kirschner wire. CONCLUSION: Our results support the recommendation for adjunct fixation of comminuted lateral unicondylar humeral fractures with an epicondylar plate.

Long-term outcomes following plate stabilization to address spontaneous luxation of the long digital extensor tendon of origin in 2 dogs.

Two dogs with spontaneous luxation of the long digital extensor tendon of origin were managed by performing a sulcoplasty and applying a plate bridging the extensor sulcus. Lameness resolved and neither dog had recurrence of lameness 59 and 15 months following surgery.

Résultats à long terme après la stabilisation par plaque pour régler la luxation spontanée de l'extenseur antérieur des phalanges d'origine chez 2 chiens. Deux chiens souffrant d'une luxation spontanée du tendon du muscle long extenseur des doigts ont été gérés en réalisant une sulcoplastie et en appliquant une plaque reliant le sulcus de l'extenseur. La boiterie s'est résorbée et ni l'un ni l'autre des chiens n'a eu de récurrence de boiterie après 59 et 15 mois après la chirurgie.(Traduit par Isabelle Vallières).

Mechanics of Supplemental Drop Wire and Half-Pin Fixation Elements in Single Ring Circular External Fixator Constructs.

OBJECTIVE: Evaluate the effects of supplemental fixation elements on the mechanical properties of a single ring circular fixator construct. STUDY DESIGN: In vitro mechanical testing. SAMPLE POPULATION: Five construct configurations (six replicates of each configuration) were used to stabilize a 1.6 cm diameter Delrin rod bone model. METHODS: Constructs were assembled using 66 mm complete rings, 1.6 mm olive wires, and 3.2 mm diameter half-pins. Construct configurations tested were a base single ring construct, constructs with 1 supplemental drop wire or constructs with 1, 2, or 3 supplemental half-pins. Constructs were loaded in axial compression, caudocranial and mediolateral bending, and torsion. Strain was measured in individual fixation elements during axial loading. RESULTS: A supplemental drop wire or half-pin significantly increased bending and torsional stiffness. The supplemental half-pin increased caudocranial stiffness significantly more than placing a drop wire. Placing a 2nd or 3rd pin afforded significantly greater increases in construct stiffness in all modes of loading, with 3 half-pin constructs having significantly greater axial and caudocranial stiffness than 2 half-pin constructs. Placing a single supplemental pin induced cantilever bending resulting in angular displacement of the Delrin rod during axial loading and high strain in both the fixation wire secured distal to the ring and the pin. Supplemental half-pins incrementally reduced strain in all fixation elements and resulted in linear displacement of the Delrin rod during axial loading. CONCLUSION: If using supplemental half-pins as fixation elements, insertion of 2 or 3 pins is preferred over a single pin.

Use of a perfusion index to confirm the presence of sciatic nerve blockade in dogs.

OBJECTIVES: To evaluate perfusion index (PI) as a determinant of regional nerve block success following sciatic nerve blockade with bupivacaine in dogs undergoing stifle surgery. STUDY DESIGN: Prospective clinical trial. ANIMALS: Ten adult dogs, aged 5.6 ± 2.6 years and weighing 36.9 ± 16.8 kg, undergoing a tibial plateau leveling osteotomy. METHODS: Dogs were premedicated with acepromazine (0.03 mg kg-1 ) and hydromorphone (0.1 mg kg-1 ) intramuscularly, and anesthetized with propofol (up to 4 mg kg-1 ) intravenously and isoflurane in oxygen. An ultrasound-guided femoral and sciatic (F+S) nerve block was performed on the surgical limb with bupivacaine (0.75%), 0.2 mL kg-1 at the femoral site and 0.3 mL kg-1 at the sciatic site, with a maximum volume of 10 mL per site. Physiological variables were recorded every 5 minutes throughout anesthesia. A pulse co-oximeter probe was placed between the third and fourth digits of both pelvic limbs, and the PI was recorded 5 minutes before infiltration with bupivacaine, immediately afterwards, and every 5 minutes for 30 minutes. Motor nerve conduction velocity (MNCV) of the sciatic nerve was performed on the surgical limb 5 minutes before and 20 minutes after bupivacaine administration to confirm nerve block. RESULTS: The PI of the surgical limb was significantly greater than the contralateral pelvic limb at 10 minutes (p = 0.03) and 15 minutes (p < 0.01) after F+S nerve blockade. The MNCV performed after sciatic nerve blockade revealed a functional motor blockade for all dogs. There were no significant changes in physiological variables. CONCLUSIONS AND CLINICAL RELEVANCE: The PI provided a reliable indication of successful sciatic nerve blockade in the clinical patients in this study. No increase in the PI by 15 minutes after bupivacaine administration around the sciatic nerve could indicate partial or total failure of anesthetic blockade.

Perception of Teaching and Assessing Technical Proficiency in American College of Veterinary Surgeons Small Animal Surgery Residency Programs.

OBJECTIVE: To determine how American College of Veterinary Surgeons (ACVS) small animal surgery residency programs are teaching and assessing technical skills, and ascertain the perceived value of those methods. STUDY DESIGN: Internet-based survey. SAMPLE POPULATION: Residents and Diplomate supervisors of ACVS small animal residency programs. METHODS: Residents and supervisors were surveyed on their experience of surgery instruction, use of different resources for teaching, type and frequency of feedback, and perceived effectiveness of their programs in imparting technical proficiency. RESULTS: A total of 130 residents (62%) and 119 supervisors (44%) participated. Both residents and supervisors estimated the resident was the primary surgeon for a mean of 64% of cases, although this proportion varied widely between participants. The majority of residents and supervisors considered that direct intraoperative guidance was the most effective way for residents to develop technical skills. Verbal interactions between supervisor and resident occurred frequently and were highly valued. Regular wet laboratories and access to simulation models were uncommon. Despite over 90% of all participants reporting that a sufficient level of technical aptitude would be attained, only 58% of residents were satisfied with their technical skills training. CONCLUSION: Residents relied on direct interaction with supervisors to develop technical skills. The traditional mode of instruction for veterinary residents is the apprenticeship model, which is partly driven by ACVS requirements of supervisory support. Exposure to other teaching and assessment methods was variable. The current structure of residency programs is successful in imparting technical competency as perceived by supervisors and residents. However, consideration of a more formal method of residency training with structured assessment of technical skills as in human medicine should not be dismissed.

Clinical outcomes associated with the initial use of the Canine Unicompartmental Elbow (CUE) Arthroplasty System(®).

We evaluated mid- to long-term outcomes with respect to function and complications in dogs undergoing canine unicompartmental elbow (CUE) arthroplasty for treatment of medial compartment disease of the elbow. This prospective multicenter case series is the first group of clinical cases to receive CUE arthroplasty. Cases (each elbow that underwent CUE performed by a participating surgeon) were enrolled into an electronic database and prospectively followed to determine and record all associated complications, as well as functional outcomes. There were 103 cases from 18 surgeons. Final follow-up time ranged from 6 to 47 mo with a mean and median of 10 mo. Canine unicompartmental elbow was associated with 1 catastrophic (1%), 11 major (10.7%), and 28 minor (27.2%) complications. Outcomes following CUE were reported as full function in 49 cases (47.6%), acceptable function in 45 cases (43.7%), and unacceptable function in 9 cases (8.7%). We conclude that CUE arthroplasty is an appropriate consideration for treatment of medial compartment disease of the elbow in dogs.

Résultats cliniques associés à l'utilisation initiale du système d'arthroplastieCanine Unicompartmental Elbow (CUE) Arthroplasty SystemMD. Nous avons évalué les résultats à long et à moyen terme relativement à la fonction et aux complications chez les chiens subissant une arthroplastie du coude unicompartimental canin (CUC) pour le traitement de la maladie compartimentale médiale du coude. Cette série prospective de cas multicentres représente le premier groupe de cas cliniques à recevoir une arthroplastie CUC. Les cas (chaque coude qui a subi une CUC réalisée par un chirurgien participant) étaient inscrits dans une base de données électroniques et suivis de manière prospective afin de déterminer et de consigner toutes les complications connexes ainsi que les résultats fonctionnels. Il y avait 103 cas provenant de 18 chirurgiens. Le temps de suivi final s'échelonnait de 6 à 47 mois avec une moyenne et une médiane de 10 mois. Le coude compartimental canin a été associé à 1 complication catastrophique (1 %), à 11 complications majeures (10,7 %) et à 28 complications mineures (27,2 %). Les résultats après l'arthroplastie CUC ont été signalés comme une fonction complète dans 49 cas (47,6 %), une fonction acceptable dans 45 cas (43,7 %) et une fonction inacceptable dans 9 cas (8,7 %). Nous avons conclu que l'arthroplastie CUC est une considération appropriée pour le traitement de la maladie compartimentale médiale du coude chez les chiens.(Traduit par Isabelle Vallières).

Biomechanical comparison of two implants for the stabilization of incomplete ossification of the humeral condyle lesions in dogs.

OBJECTIVE: To compare biomechanical properties of (1) 4.5 mm cortical screws and Fitz Fenestrated Tubular Transcondylar (F2T2) screws; (2) normal humeri and humeri with an intracondylar osteotomy; and (3) humeri with an intracondylar osteotomy stabilized with either a 4.5 mm cortical screw or a F2T2 screw. STUDY DESIGN: Cadaveric biomechanical assessment. SAMPLE POPULATION: 4.5 mm cortical screws (n = 10), 5.85 mm F2T2 screws (n = 10), and paired dog humeri (n = 40). METHODS: Cortical and F2T2 screws were loaded to failure in 3-point bending. Ten pairs of humeri with or without an intracondylar osteotomy were axially loaded to failure. Ten additional pairs of humeri with an intracondylar osteotomy were alternately stabilized with a positional cortical or F2T2 screw and axially loaded to failure. RESULTS: Mean stiffness, yield load, and failure load was significantly greater (P < .001) for the F2T2 screws compared with cortical screws as well as for intact humeri compared with humeri with an intracondylar osteotomy (P < .001). There were no significant differences in mean stiffness (P = .59), yield load (P = .31), or failure load (P = .24) between humeri with stabilized intracondylar osteotomy. CONCLUSION: Isolated F2T2 screws have superior mechanical properties to 4.5 mm cortical screws when loaded in 3-point bending. Intracondylar osteotomy adversely affected humeral mechanical integrity. Osteotomized humeri stabilized by either screw had comparable mechanical properties.

Evidence for Behavioral Autorepression in Covid-19 Epidemiological Dynamics.

It has long been hypothesized that behavioral reactions to epidemic severity autoregulate infection dynamics, for example when susceptible individuals self-sequester based on perceived levels of circulating disease. However, evidence for such 'behavioral autorepression' has remained elusive, and its presence could significantly affect epidemic forecasting and interventions. Here, we analyzed early COVID-19 dynamics at 708 locations over three epidemiological scales (96 countries, 50 US states, and 562 US counties). Signatures of behavioral autorepression were identified through: (i) a counterintuitive mobility-death correlation, (ii) fluctuation-magnitude analysis, and (iii) dynamics of SARS-CoV-2 infection waves. These data enabled calculation of the average behavioral-autorepression strength (i.e., negative feedback 'gain') across different populations. Surprisingly, incorporating behavioral autorepression into conventional models was required to accurately forecast COVID-19 mortality. Models also predicted that the strength of behavioral autorepression has the potential to alter the efficacy of non-pharmaceutical interventions. Overall, these results provide evidence for the long-hypothesized existence of behavioral autorepression, which could improve epidemic forecasting and enable more effective application of non-pharmaceutical interventions during future epidemics. Significance: Challenges with epidemiological forecasting during the COVID-19 pandemic suggested gaps in underlying model architecture. One long-held hypothesis, typically omitted from conventional models due to lack of empirical evidence, is that human behaviors lead to intrinsic negative autoregulation of epidemics (termed 'behavioral autorepression'). This omission substantially alters model forecasts. Here, we provide independent lines of evidence for behavioral autorepression during the COVID-19 pandemic, demonstrate that it is sufficient to explain counterintuitive data on 'shutdowns', and provides a mechanistic explanation of why early shutdowns were more effective than delayed, high-intensity shutdowns. We empirically measure autorepression strength, and show that incorporating autorepression dramatically improves epidemiological forecasting. The autorepression phenomenon suggests that tailoring interventions to specific populations may be warranted.

Pantarsal arthrodesis stabilized with circular external skeletal fixators in 8 dogs (2010-2022).

OBJECTIVE: To report the surgical technique, complications, and outcomes of 8 dogs that underwent a unilateral pantarsal arthrodesis stabilized using a circular external skeletal fixator (CESF) construct for the treatment of uni- or multilevel tarsal instability. ANIMALS: 8 dogs. CLINICAL PRESENTATION: Medical records from 2010 to 2023 from 2 small animal hospitals were retrospectively reviewed for dogs undergoing pantarsal arthrodeses stabilized with CESF. Data collected for each dog included signalment, injury etiology, construct configuration, radiographic imaging, antimicrobial use, complications, length of time until construct removal, and outcome based on clinical evaluation by the owner and veterinary surgeon. RESULTS: 8 dogs met the requirements of inclusion for the study. Dogs had a mean age of 5.5 years (range, 0.42 to 13 years) and weight of 15.1 kg (range, 2.5 to 26.4 kg). Angulated 3- and 4-ring constructs were used in 5 and 3 dogs, respectively, with or without hybridization. Tarsi were stabilized with a mean angle of extension of 124.8° (range, 111.5° to 136.5°). Fixator removal was performed at a mean time of 11.3 weeks (range, 6 to 16 weeks). Complications developed in 4 dogs, 2 of which had poor clinical outcomes despite additional interventions, including recurrent digit trauma and poor limb use postoperatively. Six dogs had excellent outcomes. CLINICAL RELEVANCE: A CESF may be considered as an alternative to plate stabilization when performing a pantarsal arthrodesis. This fixation requires rigorous postoperative care but obviates the need for supplemental postoperative coaptation.